Gimme' A Break: Offering Sabbaticals as an Optional Leave Benefit in the Lodging Industry

ABSTRACT The purpose of this study is to investigate the extended leave programs offered by lodging companies in the United States and to suggest a model that could be used in the lodging industry. This model mirrors successful sabbatical leave programs offered by leading companies featured in the annual report, 100 Best Companies to Work For (from this point forward, referred to as 100 Best), published on-line by Fortune Magazine, 2013 (CNN, 2013). While extended leave programs are not entirely lacking in the industry, our research discovered that such leave systems are rare. According to the companies investigated that offer a sabbatical leave program, this benefit offers highly sought after time away from work for top performing employees at the management and higher levels. The benefits reported include happier employees who have increased feelings of company loyalty, job satisfaction, and overall better attitudes. The sponsoring companies stated that those who take part in such leave contribute at a higher level upon their return, bringing fresh ideas and a renewed commitment to the company’s success.

A heuristic algorithm to generate test program sequences for moving probe electronic test equipment

The electronics industry, is experiencing two trends one of which is the drive towards miniaturization of electronic products. The in-circuit testing predominantly used for continuity testing of printed circuit boards (PCB) can no longer meet the demands of smaller size circuits. This has lead to the development of moving probe testing equipment. Moving Probe Test opens up the opportunity to test PCBs where the test points are on a small pitch (distance between points). However, since the test uses probes that move sequentially to perform the test, the total test time is much greater than traditional in-circuit test. While significant effort has concentrated on the equipment design and development, little work has examined algorithms for efficient test sequencing. The test sequence has the greatest impact on total test time, which will determine the production cycle time of the product. Minimizing total test time is a NP-hard problem similar to the traveling salesman problem, except with two traveling salesmen that must coordinate their movements. The main goal of this thesis was to develop a heuristic algorithm to minimize the Flying Probe test time and evaluate the algorithm against a "Nearest Neighbor" algorithm. The algorithm was implemented with Visual Basic and MS Access database. The algorithm was evaluated with actual PCB test data taken from Industry. A statistical analysis with 95% C.C. was performed to test the hypothesis that the proposed algorithm finds a sequence which has a total test time less than the total test time found by the "Nearest Neighbor" approach. Findings demonstrated that the proposed heuristic algorithm reduces the total test time of the test and, therefore, production cycle time can be reduced through proper sequencing.

A Comparison of the Impacts of Lithium Extraction and Lithium Recycling Processes

Lithium is used in the cathode and electrolyte of rechargeable batteries in many portable electronics and electric vehicles, and is thus seen as a critical component of modern technology (Gruber et al., 2011). Electric vehicles are promoted as a way to reduce carbon emissions associated with the transportation sector, which accounts for 14.3% of anthropogenic greenhouse gas emissions (OECD International Transport Forum, 2010). However, the sustainability of lithium procurement will influence the overall environmental impact of this proposed “green” solution. It is estimated that 66% of the world’s lithium resource is contained in natural brines, 24% in pegmatites, and 8% in sedimentary rocks such as hectorite clays (Gruber et al., 2011). It has been shown that “[r]ecycling of lithium from Li-ion batteries may be a critical factor in balancing the supply of lithium with future demand” (Gruber et al., 2011). In an attempt to quantify energy and materials consumption associated with production of a unit of useful lithium compounds, industry reports and peer-reviewed scientific literature concerning lithium mining and lithium recycling were reviewed and compared. Other aspects of sustainability, such as waste or by-products produced in the production of a unit of useful lithium, were also explored. Thus, this paper will serve to further the evaluation of the comparative environmental consequences associated with lithium production via extraction versus recycling. Efficiencies must be made in both processes to maximize productivity while minimizing ecological harm.

The Affordable Care Act and the Transformation of US Health Care

The neoliberal period was accompanied by a momentous transformation within the US health care system.  As the result of a number of political and historical dynamics, the healthcare law signed by President Barack Obama in 2010 ‑the Affordable Care Act (ACA)‑ drew less on universal models from abroad than it did on earlier conservative healthcare reform proposals. This was in part the result of the influence of powerful corporate healthcare interests. While the ACA expands healthcare coverage, it does so incompletely and unevenly, with persistent uninsurance and disparities in access based on insurance status. Additionally, the law accommodates an overall shift towards a consumerist model of care characterized by high cost sharing at time of use. Finally, the law encourages the further consolidation of the healthcare sector, for instance into units named “Accountable Care Organizations” that closely resemble the health maintenance organizations favored by managed care advocates. The overall effect has been to maintain a fragmented system that is neither equitable nor efficient. A single payer universal system would, in contrast, help transform healthcare into a social right.

2016 Real Estate Industry Leader Profile: MaryAnne Gilmartin

[Excerpt] Cornell University and the Baker Program in Real Estate are pleased to announce the 2016 Real Estate Industry Leader Award recipient: MaryAnne Gilmartin, President & CEO of Forest City Ratner Companies. MaryAnne’s leadership in the real estate industry has made a powerful and positive impact on society as a driving force behind several of the highest-profile, largest-scale additions to the urban landscape of New York City.

Project Evaluation: Iowa Motor Vehicle Fuel Reduction Program, 1989

The results of a study which evaluates the Iowa Motor Vehicle Fuel Reduction Program have been summarized and described in this report. The Iowa Motor Vehicle Fuel Reduction Program was designed to demonstrate fuel savings through traffic signal modernization projects and provide direct benefits to motorists in Iowa.

Remolding a company through a compliance program : the case of Siemens

Abstract : Since at least the 1980's, a growing number of companies have set up an ethics or a compliance program within their organization. However, in the field of study of business management, there is a paucity of research studies concerning these management systems. This observation warranted the present investigation of one company's compliance program. Compliance programs are set up so that individuals working within an organization observe the laws and regulations which pertain to their work. This study used a constructivist grounded theory methodology to examine the process by which a specific compliance program, that of Siemens Canada Limited, was implemented throughout its organization. In conformity with this methodology, instead of proceeding with the investigation in accordance to a particular theoretical framework, the study established a number of theoretical constructs used strictly as reference points. The study's research question was stated as: what are the characteristics of the process by which Siemens' compliance program integrated itself into the existing organizational structure and gained employee acceptance? Data consisted of documents produced by the company and of interviews done with twenty-four managers working for Siemens Canada Limited. The researcher used QSR-Nvivo computer assisted software to code transcripts and to help with analyzing interviews and documents. Triangulation was done by using a number of analysis techniques and by constantly comparing findings with extant theory. A descriptive model of the implementation process grounded in the experience of participants and in the contents of the documents emerged from the data. The process was called "Remolding"; remolding being the core category having emerged. This main process consisted of two sub-processes identified as "embedding" and "appraising." The investigation was able to provide a detailed account of the appraising process. It identified that employees appraised the compliance program according to three facets: the impact of the program on the employee's daily activities, the relationship employees have with the local compliance organization, and the relationship employees have with the corporate ethics identity. The study suggests that a company who is entertaining the idea of implementing a compliance program should consider all three facets. In particular, it suggests that any company interested in designing and implementing a compliance program should pay particular attention to its corporate ethics identity. This is because employee's acceptance of the program is influenced by their comparison of the company's ethics identity to their local ethics identity. Implications of the study suggest that personnel responsible for the development and organizational support of a compliance program should understand the appraisal process by which employees build their relationship with the program. The originality of this study is that it points emphatically that companies must pay special attention in developing a corporate ethics identify which is coherent, well documented and well explained.

Evaluating Water Temperature, Habitat and Fish Communities in Candidate Coolwater Streams in Illinois Annual Project Report 2010

Work during this reporting period focused on characterizing temperature, habitat, and biological communities at candidate coolwater sites. During the past year we have collected additional temperature data from 57 candidate streams and other locations and now have records from 232 stream reaches. Eighty-two sites in Illinois have been identified as cool- or coldwater based on these records. Physical habitat surveys have been conducted at 79 sites where temperature data were available. Fish and macroinvertebrate data were obtained from the cooperative basin survey program data managers for candidate sites whenever possible and added to collections made during previous project years. This report summarizes progress for the period beginning 1 October 2009 and ending 30 September 2010. Additional analyses are ongoing and will be presented in the final report upon completion of this project.

Optimising plant bed performance through adaptive research with the Australian sweetpotato industry

A key driver of Australian sweetpotato productivity improvements and consumer demand has been industry adoption of disease-free planting material systems. On a farm isolated from main Australian sweetpotato areas, virus-free germplasm is annually multiplied, with subsequent 'pathogen-tested' (PT) sweetpotato roots shipped to commercial Australian sweetpotato growers. They in turn plant their PT roots into specially designated plant beds, commencing in late winter. From these beds, they cut sprouts as the basis for their commercial fields. Along with other intense agronomic practices, this system enables Australian producers to achieve worldRSQUOs highest commercial yields (per hectare) of premium sweetpotatoes. Their industry organisation, ASPG (Australian Sweetpotato Growers Inc.), has identified productivity of mother plant beds as a key driver of crop performance. Growers and scientists are currently collaborating to investigate issues such as catastrophic plant beds losses; optimisation of irrigation and nutrient addition; rapidity and uniformity of initial plant bed harvests; optimal plant bed harvest techniques; virus re-infection of plant beds; and practical longevity of plant beds. A survey of 50 sweetpotato growers in Queensland and New South Wales identified a substantial diversity in current plant bed systems, apparently influenced by growing district, scale of operation, time of planting, and machinery/labour availability. Growers identified key areas for plant bed research as: optimising the size and grading specifications of PT roots supplied for the plant beds; change in sprout density, vigour and performance through sequential cuttings of the plant bed; optimal height above ground level to cut sprouts to maximise commercial crop and plant bed performance; and use of structures and soil amendments in plant bed systems. Our ongoing multi-disciplinary research program integrates detailed agronomic experiments, grower adaptive learning sites, product quality and consumer research, to enhance industry capacity for inspired innovation and commercial, sustainable practice change.

Alumni involvement in a technology program

Abstract: Everyone knows that in today's modern world, it is hard to keep up with the pace of the ever changing field of technology. This is no different in technology programs at the cegep level. Teachers who are employed at the cegep level find it difficult to keep up to date with the evolving industry trends, especially when working full time. In this paper, the involvement of alumni in the program is examined. The purpose of this study is to examine five areas of alumni involvement. These five major areas of alumni involvement are advisory committees, internships, field trips, guest speaking and real life projects. The literature is reviewed with respect to each of the described areas of involvement as well as theories of motivation. The shift of emphasis from teacher to student is discussed as well as the role of the teacher when faced with changes in technology. Finally students and alumni are surveyed to examine their perceptions to the various types of alumni involvement in the B.S.E.T. program. This research helps to describe whether and to what degree alumni involvement benefits our students in B.S.E.T. Several variables are examined, such as: academic satisfaction and alumni involvement; graduation year and academic satisfaction; graduation year and alumni involvement. The study also examines areas such as motivational attitudes of graduates to stay involved; areas where it is crucial for alumni to stay involved; desire to partner in a capstone project and area of involvement that tends to motivate students the most and that the graduates find of utmost importance.

Socio-economic profile of the Philippine National Aquasilviculture Program (PNAP) beneficiaries in Jiabong, Samar, Philippines

A total of 37 beneficiaries under the Philippine National Aquasilviculture Program (PNAP) was interviewed using the structured survey questionnaire of Socioeconomic Monitoring Guidelines for Coastal Managers in Southeast Asia (SocMon SEA). Most of the members of the households are young and in-school. Household heads’ primary occupation is fishing, a shift from mussel farming- the town’s major industry in the past decades. Perceived threat by the beneficiaries is related to the environment specifically typhoon and the problems on waste disposal. It also identified law enforcement as weak leading to dwindling fish catch, mass mortality of mussel, red tide and other problems affecting their primary sources of income. However, they could not relate these phenomena to the most likely causes. The current occupation does not provide sufficient income for the family as they seek for alternative jobs. Garbage and poor implementation of laws are among the identified problems of the beneficiaries.

Turkish Security Policymaking on Nuclear Issues: Conceptualizing Advanced Cooperative Security Strategies

Turkey is a non-nuclear member of a nuclear alliance in a region where nuclear proliferation is of particular concern. As the only North Atlantic Treaty Organization (NATO) member that has a border with the Middle East, Turkish officials argue that Turkey cannot solely rely on NATO guarantees in addressing the regional security challenges. However, Turkey has not been able to formulate a security policy that reconciles its quest for independence, its NATO membership, the bilateral relationship with the United States, and regional engagement in the Middle East. This dissertation assesses the strategic implications of Turkey’s perceptions of the U.S./NATO nuclear and conventional deterrence on nuclear issues. It explores three case studies by the process tracing of Turkish policymakers’ nuclear-related decisions on U.S. tactical nuclear weapons deployed in Europe, national air and missile defense, and Iran’s nuclear program. The study finds that the principles of Turkish security policymaking do not incorporate a fundamentally different reasoning on nuclear issues than conventional deterrence. Nuclear weapons and their delivery systems do not have a defining role in Turkish security and defense strategy. The decisions are mainly guided by non-nuclear considerations such as Alliance politics, modernization of the domestic defense industry, and regional influence. The dissertation argues that Turkey could formulate more effective and less risky security policies on nuclear issues by emphasizing the cooperative security approaches within the NATO Alliance over confrontational measures. The findings of this dissertation reveal that a major transformation of Turkish security policymaking is required to end the crisis of confidence with NATO, redefinition of the strategic partnership with the US, and a more cautious approach toward the Middle East. The dissertation argues that Turkey should promote proactive measures to reduce, contain, and counter risks before they develop into real threats, as well as contribute to developing consensual confidence-building measures to reduce uncertainty.

Return on Investment Program FYs 10, 11 and 12 Project Status Report, January 15, 2014

DAS is required to report on projects funded through the Return on Investment Program (ROI). The ROI program has been funded through an appropriation from the Technology Reinvestment Fund. The Technology Reinvestment Fund was created during the 2006 legislative session, and the first appropriations from this fund were for FY 2006-2007. The first report related to that fiscal year and was delivered to the legislature by January 1, 2008. This current report updates projects from fiscal years 10, 11 and 12.

Return on Investment Program FYs 11 and 12 Project Status Report, January 1, 2015

The Office of the Chief Information Officer is required to report on projects funded through the Return on Investment Program (ROI). The ROI program has been funded through an appropriation from the Technology Reinvestment Fund. The Technology Reinvestment Fund was created during the 2006 legislative session, and the first appropriations from this fund were for FY 2006-2007. The first report related to that fiscal year and was delivered to the legislature by January 1, 2008. This current report updates projects from fiscal years 11 and 12.