Impaired protamination and sperm DNA damage in a Nellore bull with high percentages of morphological sperm defects in comparison to normospermic bulls

The routine semen evaluation assessing sperm concentration, motility and morphology, does not identify subtle defects in sperm chromatin architecture. Bulls appear to have stable chromatin, with low levels of DNA fragmentation. However, the nature of fragmentation and its impact on fertility remain unclear and there are no detailed reports characterizing the DNA organization and damage in this species. The intensive genetic selection, the use of artificial insemination and in vitro embryo production associated to the cryopreservation process can contribute to the chromatin damage and highlights the importance of sperm DNA integrity for the success of these technologies. Frozen-thawed semen samples from three ejaculates from a Nellore bull showed high levels of morphological sperm abnormalities (55.8±5.1%), and were selected for complementary tests. Damage of acrosomal (76.9±8.9%) and plasma membranes (75.7±9.3%) as well as sperm DNA strand breaks (13.8±9.5%) and protamination deficiency (3.7±0.6%) were significantly higher compared to the values measured in the semen of five Nellore bulls with normospermia (24.3±3.3%; 24.5±6.1%; 0.6±0.5%; 0.4±0.6% for acrosome, plasma membrane, DNA breaks and protamine deficiency, respectively) (P<0.05). Motility and percentage of spermatozoa with low mitochondrial potential showed no differences between groups. This study shows how routine semen analyses (in this case morphology) may point to the length and complexity of sperm cell damage emphasizing the importance of sperm function testing.

Impact of obesity on autonomic modulation, heart rate and blood pressure in obese young people

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Para além da heteronormatividade: uma análise dos eunucos representados por Estácio, Marcial e Suetônio (Roma, 80-121 d. C)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effect of feed restriction on body composition and metabolism of goats of different genders

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Para além da heteronormatividade: uma análise dos eunucos representados por Estácio, Marcial e Suetônio (Roma, 80-121 d. C)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effect of feed restriction on body composition and metabolism of goats of different genders

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Eroded dentin does not jeopardize the bond strength of adhesive restorative materials

This in vitro study evaluated the bond strength of adhesive restorative materials to sound and eroded dentin. Thirty-six bovine incisors were embedded in acrylic resin and ground to obtain flat buccal dentin surfaces. Specimens were randomly allocated in 2 groups: sound dentin (immersion in artificial saliva) and eroded dentin (pH cycling model - 3x / cola drink for 7 days). Specimens were then reassigned according to restorative material: glass ionomer cement (Ketac (TM) Molar Easy Mix), resin-modified glass ionomer cement (Vitremer (TM)) or adhesive system with resin composite (Adper Single Bond 2 + Filtek Z250). Polyethylene tubes with an internal diameter of 0.76 mm were placed over the dentin and filled with the material. The microshear bond test was performed after 24 h of water storage at 37 degrees C. The failure mode was evaluated using a stereomicroscope (400x). Bond strength data were analyzed with two-way ANOVA and Tukey's post hoc tests (alpha = 0.05). Eroded dentin showed bond strength values similar to those for sound dentin for all materials. The adhesive system showed the highest bond strength values, regardless of the substrate (p < 0.0001). For all groups, the adhesive/mixed failure prevailed. In conclusion, adhesive materials may be used in eroded dentin without jeopardizing the bonding quality. It is preferable to use an etch-and-rinse adhesive system because it shows the highest bond strength values compared with the glass ionomer cements tested.

A simple criterion to predict the glass forming ability of metallic alloys

A new and simple criterion with which to quantitatively predict the glass forming ability (GFA) of metallic alloys is proposed. It was found that the critical cooling rate for glass formation (R-C) correlates well with a proper combination of two factors, the minimum topological instability (lambda(min)) and the Delta h parameter, which depends on the average work function difference (Delta phi) and the average electron density difference (Delta n(ws)(1/3)) among the constituent elements of the alloy. A correlation coefficient (R-2) of 0.76 was found between R-c and the new criterion for 68 alloys in 30 different metallic systems. The new criterion and the Uhlmann's approach were used to estimate the critical amorphous thickness (Z(C)) of alloys in the Cu-Zr system. The new criterion underestimated R-C in the Cu-Zr system, producing predicted Z(C) values larger than those observed experimentally. However, when considering a scale factor, a remarkable similarity was observed between the predicted and the experimental behavior of the GFA in the binary Cu-Zr. When using the same scale factor and performing the calculation for the ternary Zr-Cu-Al, good agreement was found between the predicted and the actual best GFA region, as well as between the expected and the observed critical amorphous thickness. (C) 2012 American Institute of Physics. [doi:10.1063/1.3676196]

Epidemiological and clinical characteristics of injuries among adolescents attended at an emergency service in the city of Ribeirao Preto, Sao Paulo

CONTEXT AND OBJECTIVE: Injuries are an important cause of morbidity during adolescence, but can be avoided through learning about some of their characteristics. This study aimed to identify the most frequent injuries among adolescents attended at an emergency service. DESIGN AND SETTING: Retrospective descriptive study on adolescents attended at the emergency service of the Teaching Health Center, Faculdade de Medicina de Ribeirao Preto (FMRP), between January 1, 2009, and September 30, 2009. METHODS: Age, sex, type of injury, site, day and time of occurrence, part of body involved, care received, whether the adolescent was accompanied at the time of injury and whether any type of counseling regarding injury prevention had been given were analyzed. RESULTS: Among 180 adolescents attended, 106 (58.8%) were boys and 74 (41.1%) were girls. Their ages were: 10 to 12 (66/36.6%), 12 to 14 (60/33.3%) and 14 to 16 years (54/30%). The injuries had occurred in public places (47.7%) and at home (21.1%). The main types were bruises (45.1%) and falls (39.2%), involving upper limbs (46.1%), lower limbs (31%) and head/neck (13.1%). The injuries occurred in the afternoon (44.4%) and morning (30%), on Mondays (17.7%) and Thursdays (16.6%). Radiological examinations were performed on 53.8%. At the time of injury, 76.1% of the adolescents were accompanied. Some type of counseling about injury prevention had been received by 39.4%. CONCLUSIONS: Although the injuries were of low severity, preventive attitudes need to be incorporated in order to reduce the risks and provide greater safety for adolescents.

Post-operative mediastinitis in a Heart Hospital of Recife: contributions for nursing care

The objective of this study was to determine the prevalence of post-operative mediastinitis with the purpose to contribute to nursing care knowledge. To do this, an analysis was performed on 896 medical records of patients who underwent heart surgery involving sternotomy at the Cardiology Emergency Room of Recife-PE, in the period between June 2007 and June 2009. The following variables were considered: gender, age, type of surgery, personal history, length of stay, use of antibiotics, and culture of the surgical wound. A high death rate from mediastinitis was observed (33.3%). Several risk factors were identified, including: systemic arterial hypertension (80.9%); smoking (61.9%); diabetes mellitus (42.8%); and obesity (33.3%), most of which (76.2%) were identified in patients who underwent surgery for myocardial revascularization. It is concluded that mediastinitis is a serious infection that needs continuous nursing supervision and preventive measures to assure an early diagnosis and, thus, reduce mortality.

Development of osteochondrosis in Lusitano foals: A radiographic study

This study aimed to detect, by radiographic examination, the evolution of osteochondral lesions in the tarsocrural and femoropatellar joints of Lusitano foals. Within 1 month of age, 76.08% of foals had radiographic signs of osreochondrosis, but only 16.20% had lesions at 18 months. The radiographic signs resolved by 5 mo of age in most foals, but some cases that involved either joint, were not resolved until 12 mo of age. It is thought that the "age of no return" is 5 mo for the tarsocrural and 8 mo for the femoropatellar joint but this study demonstrated regression of osteochondral lesions in both joints of Lusitano foals up to 12 months of age.

Photoprotection and the Photophysics of Acylated Anthocyanins

The proposed role of anthocyanins in protecting plants against excess solar radiation is consistent with the occurrence of ultrafast (525 ps) excited-state proton transfer as the major de-excitation pathway of these molecules. However, because natural anthocyanins absorb mainly in the visible region of the spectra, with only a narrow absorption band in the UV-B region, this highly efficient deactivation mechanism would essentially only protect the plant from visible light. On the other hand, ground-state charge-transfer complexes of anthocyanins with naturally occurring electron-donor co-pigments, such as hydroxylated flavones, flavonoids, and hydroxycinnamic or benzoic acids, do exhibit high UV-B absorptivities that complement that of the anthocyanins. In this work, we report a comparative study of the photophysics of the naturally occurring anthocyanin cyanin, intermolecular cyanincoumaric acid complexes, and an acylated anthocyanin, that is, cyanin with a pendant coumaric ester co-pigment. Both inter- and intramolecular anthocyaninco-pigment complexes are shown to have ultrafast energy dissipation pathways comparable to those of model flavylium cationco-pigment complexes. However, from the standpoint of photoprotection, the results indicate that the covalent attachment of co-pigment molecules to the anthocyanin represents a much more efficient strategy by providing the plant with significant UV-B absorption capacity and at the same time coupling this absorption to efficient energy dissipation pathways (ultrafast internal conversion of the complexed form and fast energy transfer from the excited co-pigment to the anthocyanin followed by adiabatic proton transfer) that avoid net photochemical damage.

Characterization of a thermostable extracellular tannase produced under submerged fermentation by Aspergillus ochraceus

Background: Tannases are enzymes that may be used in different industrial sectors as, for example, food and pharmaceutical. They are obtained mainly from microorganisms, as filamentous fungi. However, the diversity of fungi stays poorly explored for tannase production. In this article, Aspergillus ochraceus is presented as a new source of tannase with interesting features for biotechnological applications. Results: Extracellular tannase production was induced when the fungus was cultured in Khanna medium with tannic acid as carbon source. The extracellular tannase was purified 9-fold with 2% recovery and a single band corresponding to 85 kDa was observed in SDS-PAGE. The native apparent molecular mass was estimated as 112 kDa. Optima of temperature and pH were 40 degrees C and 5.0, respectively. The enzyme was fully stable from 40 degrees C to 60 degrees C during 1 hr. The activity was enhanced by Mn2+ (33-39%) and NH4+ (15%). The purified tannase hydrolyzed tannic acid and methyl gallate with Km of 0.76 mM and 0.72 mM, respectively, and Vmax of 0.92 U/mg protein and 0.68 U/mg protein, respectively. The analysis of a partial sequence of the tannase encoding gene showed an open read frame of 567 bp and a sequence of 199 amino acids were predicted. TLC analysis revealed the presence of gallic acid as a tannic acid hydrolysis product. Conclusion: The extracellular tannase produced by A. ochraceus showed distinctive characteristics such as monomeric structure and activation by Mn2+, suggesting a new kind of fungal tannases with biotechnological potential. Further, it was the first time that a partial gene sequence for A. ochraceus tannase was described.

Epidemiological and clinical characteristics of injuries among adolescents attended at an emergency service in the city of Ribeirão Preto, São Paulo

CONTEXT AND OBJECTIVE: Injuries are an important cause of morbidity during adolescence, but can be avoided through learning about some of their characteristics. This study aimed to identify the most frequent injuries among adolescents attended at an emergency service. DESIGN AND SETTING: Retrospective descriptive study on adolescents attended at the emergency service of the Teaching Health Center, Faculdade de Medicina de Ribeirão Preto (FMRP), between January 1, 2009, and September 30, 2009. METHODS: Age, sex, type of injury, site, day and time of occurrence, part of body involved, care received, whether the adolescent was accompanied at the time of injury and whether any type of counseling regarding injury prevention had been given were analyzed. RESULTS: Among 180 adolescents attended, 106 (58.8%) were boys and 74 (41.1%) were girls. Their ages were: 10 to 12 (66/36.6%), 12 to 14 (60/33.3%) and 14 to 16 years (54/30%). The injuries had occurred in public places (47.7%) and at home (21.1%). The main types were bruises (45.1%) and falls (39.2%), involving upper limbs (46.1%), lower limbs (31%) and head/neck (13.1%). The injuries occurred in the afternoon (44.4%) and morning (30%), on Mondays (17.7%) and Thursdays (16.6%). Radiological examinations were performed on 53.8%. At the time of injury, 76.1% of the adolescents were accompanied. Some type of counseling about injury prevention had been received by 39.4%. CONCLUSIONS: Although the injuries were of low severity, preventive attitudes need to be incorporated in order to reduce the risks and provide greater safety for adolescents.

Retrieval of trace gases vertical profile in the lower atmosphere combining. Differential Optical Absorption Spectroscopy with radiative transfer models

The motivation for the work presented in this thesis is to retrieve profile information for the atmospheric trace constituents nitrogen dioxide (NO2) and ozone (O3) in the lower troposphere from remote sensing measurements. The remote sensing technique used, referred to as Multiple AXis Differential Optical Absorption Spectroscopy (MAX-DOAS), is a recent technique that represents a significant advance on the well-established DOAS, especially for what it concerns the study of tropospheric trace consituents. NO2 is an important trace gas in the lower troposphere due to the fact that it is involved in the production of tropospheric ozone; ozone and nitrogen dioxide are key factors in determining the quality of air with consequences, for example, on human health and the growth of vegetation. To understand the NO2 and ozone chemistry in more detail not only the concentrations at ground but also the acquisition of the vertical distribution is necessary. In fact, the budget of nitrogen oxides and ozone in the atmosphere is determined both by local emissions and non-local chemical and dynamical processes (i.e. diffusion and transport at various scales) that greatly impact on their vertical and temporal distribution: thus a tool to resolve the vertical profile information is really important. Useful measurement techniques for atmospheric trace species should fulfill at least two main requirements. First, they must be sufficiently sensitive to detect the species under consideration at their ambient concentration levels. Second, they must be specific, which means that the results of the measurement of a particular species must be neither positively nor negatively influenced by any other trace species simultaneously present in the probed volume of air. Air monitoring by spectroscopic techniques has proven to be a very useful tool to fulfill these desirable requirements as well as a number of other important properties. During the last decades, many such instruments have been developed which are based on the absorption properties of the constituents in various regions of the electromagnetic spectrum, ranging from the far infrared to the ultraviolet. Among them, Differential Optical Absorption Spectroscopy (DOAS) has played an important role. DOAS is an established remote sensing technique for atmospheric trace gases probing, which identifies and quantifies the trace gases in the atmosphere taking advantage of their molecular absorption structures in the near UV and visible wavelengths of the electromagnetic spectrum (from 0.25 μm to 0.75 μm). Passive DOAS, in particular, can detect the presence of a trace gas in terms of its integrated concentration over the atmospheric path from the sun to the receiver (the so called slant column density). The receiver can be located at ground, as well as on board an aircraft or a satellite platform. Passive DOAS has, therefore, a flexible measurement configuration that allows multiple applications. The ability to properly interpret passive DOAS measurements of atmospheric constituents depends crucially on how well the optical path of light collected by the system is understood. This is because the final product of DOAS is the concentration of a particular species integrated along the path that radiation covers in the atmosphere. This path is not known a priori and can only be evaluated by Radiative Transfer Models (RTMs). These models are used to calculate the so called vertical column density of a given trace gas, which is obtained by dividing the measured slant column density to the so called air mass factor, which is used to quantify the enhancement of the light path length within the absorber layers. In the case of the standard DOAS set-up, in which radiation is collected along the vertical direction (zenith-sky DOAS), calculations of the air mass factor have been made using “simple” single scattering radiative transfer models. This configuration has its highest sensitivity in the stratosphere, in particular during twilight. This is the result of the large enhancement in stratospheric light path at dawn and dusk combined with a relatively short tropospheric path. In order to increase the sensitivity of the instrument towards tropospheric signals, measurements with the telescope pointing the horizon (offaxis DOAS) have to be performed. In this circumstances, the light path in the lower layers can become very long and necessitate the use of radiative transfer models including multiple scattering, the full treatment of atmospheric sphericity and refraction. In this thesis, a recent development in the well-established DOAS technique is described, referred to as Multiple AXis Differential Optical Absorption Spectroscopy (MAX-DOAS). The MAX-DOAS consists in the simultaneous use of several off-axis directions near the horizon: using this configuration, not only the sensitivity to tropospheric trace gases is greatly improved, but vertical profile information can also be retrieved by combining the simultaneous off-axis measurements with sophisticated RTM calculations and inversion techniques. In particular there is a need for a RTM which is capable of dealing with all the processes intervening along the light path, supporting all DOAS geometries used, and treating multiple scattering events with varying phase functions involved. To achieve these multiple goals a statistical approach based on the Monte Carlo technique should be used. A Monte Carlo RTM generates an ensemble of random photon paths between the light source and the detector, and uses these paths to reconstruct a remote sensing measurement. Within the present study, the Monte Carlo radiative transfer model PROMSAR (PROcessing of Multi-Scattered Atmospheric Radiation) has been developed and used to correctly interpret the slant column densities obtained from MAX-DOAS measurements. In order to derive the vertical concentration profile of a trace gas from its slant column measurement, the AMF is only one part in the quantitative retrieval process. One indispensable requirement is a robust approach to invert the measurements and obtain the unknown concentrations, the air mass factors being known. For this purpose, in the present thesis, we have used the Chahine relaxation method. Ground-based Multiple AXis DOAS, combined with appropriate radiative transfer models and inversion techniques, is a promising tool for atmospheric studies in the lower troposphere and boundary layer, including the retrieval of profile information with a good degree of vertical resolution. This thesis has presented an application of this powerful comprehensive tool for the study of a preserved natural Mediterranean area (the Castel Porziano Estate, located 20 km South-West of Rome) where pollution is transported from remote sources. Application of this tool in densely populated or industrial areas is beginning to look particularly fruitful and represents an important subject for future studies.