Production of Gaseous Radiotracers Ch3i and I2 Through Na123i Salt

The objective of the present work was to develop, separately, methodology for production of two gaseous tracers through the sodium iodide NaI marked with 123I. Found in the nature in form different, the iodine has been used in diverse works in the area of the industry and health. These two forms of the gaseous iodine, the methyl iodide, CH3I, and molecular iodine, I2, are very unstable and volatile in the ambient temperature and presents different problems in clean-up and monitoring systems. The syntheses were processed with sodium iodide (NaI) 1M aqueous solution marked with 123I. The production of gas I2 was realized with in chlorine acid (HCl) and sodium iodate salt (NaIO3) and the CH3I was used, the salt of NaI and the reagent (CH3)2SO4. The production of gases was initially realized through in unit in glass with an inert material and the purpose was to study the kinetic of reaction and to determine the efficiency of production. The two synthesis occurs in the reaction bottle and after of produced, the gas is stored in the collect bottle that contains a starch solution for fixed the I2, and in syntheses of CH3I contains a silver nitrate solution for your fixation. To determine the efficiency of production of gases, analytic tests were realized, where the consumption of iodide ions of the bottle of reaction are measured. The optimization of production of the each gaseous tracer was studied varying parameter as: concentration of iodide, concentration of acid and temperature. After, the syntheses of the radiotracers were realized in the compact unit, having been used as main reagent the salt radiated of sodium iodide, Na123I. The transportation of elementary iodine and methyl iodine was studied by a scintillation detector NaI (2 x 2)” positioned in the reaction bottle.

Production of Gaseous Tracer I2 from the Sodiumiodide Salt

Found in the nature in form different, the iodine has been used in diverse works in the area of the industry and health. The iodine is very unstable and volatile in the ambient temperature and the I2 is one of the diverse gaseous forms found. In this work was developed methodology for production of gaseous tracer from the sodium iodide (NaI) 0,1 M marked with 123I. The synthesis was processed with in chlorine acid (HCl) 1M and sodium iodate salt (NaIO3). The production of gas I2 initially was carried through in unit of glass with the inert material and the purpose was to study the kinetic of reaction. The synthesis occurs in the reaction bottle and the produced gas is stored in the collect bottle that contains a starch solution (5 g/100 mL water). To determine the efficiency of production of gas I2, analytic tests had been carried through, where the consumption of iodide ions of the bottle of reaction is measured. The optimization of production of the gaseous tracer was studied varying parameters as: concentration of iodide and iodate, concentration of acid and temperature. Then, the synthesis of the radiotracer was realized in the compact unit, being utilized as main reagent the salt radiated of sodium iodide, Na123I. The transportation of elementary iodine was studied by a scintillation detector NaI (2 x 2)” placed in the reaction bottle. To acquire the data, the detector use a set of electronic modules for the acquisition of signals generated.

Estudo anatômico de trembleya phlogiformis dc.

v. 13, n. 2, p. 82-92, 2016.

Sesamoids of the metatarsophalangeal joint of the big toe: a sistematic review

Abstract: The first metatarsal sesamoid bones are not always taken into consideration when making a diagnosis, in pathologies that affect the region of the first metatarsal head. This is due to the insufficient knowledge of all the pathologies that can affect the sesamoids and the relative little incidence that they have. With the increment of sports activities, in particular the running, increasingly affects of the symptoms concerning this region are observed. Methods: A literature search was performed in 5 databases (Medline, PubMed, Scopus, Cochrane Library and BUCEA). The terms included in the search were: sesamoids, anatomy, biomechanics, sesamoids review and sesamoids pathology. In the initial search articles with no more than 10 years, only humans and revision texts are considered. Results: 24 articles were selected and include different pathologies with diagnosis using imaging tests and treatments, both conservative and surgical; as well as aspects from the biomechanics of the metatarsal-sesamoid joint. Conclusion: Sesamoids due of his anatomy, topography and function can be involved in a lot of pathologies; with similar signs and symptoms that can confuse the podiatry when he has to make a correct diagnosis or treatment.

Catalytic decomposition of formic acid using supported metal nanoparticles

Upgrade of hydrogen to valuable fuel is a central topic in modern research due to its high availability and low price. For the difficulties in hydrogen storage, different pathways are still under investigation. A promising way is in the liquid-phase chemical hydrogen storage materials, because they can lead to greener transformation processes with the on line development of hydrogen for fuel cells. The aim of my work was the optimization of catalysts for the decomposition of formic acid made by sol immobilisation method (a typical colloidal method). Formic acid was selected because of the following features: it is a versatile renewable reagent for green synthesis studies. The first aim of my research was the synthesis and optimisation of Pd nanoparticles by sol-immobilisation to achieve better catalytic performances and investigate the effect of particle size, oxidation state, role of stabiliser and nature of the support. Palladium was chosen because it is a well-known active metal for the catalytic decomposition of formic acid. Noble metal nanoparticles of palladium were immobilized on carbon charcoal and on titania. In the second part the catalytic performance of the “homemade” catalyst Pd/C to a commercial Pd/C and the effect of different monometallic and bimetallic systems (AuxPdy) in the catalytic formic acid decomposition was investigated. The training period for the production of this work was carried out at the University of Cardiff (Group of Dr. N. Dimitratos).

Étude exploratoire auprès de médecins des effets perçus d’une formation corps / esprit fondée sur les pratiques du Sensible

Résumé: Les pratiques du Sensible sont des pratiques d’accompagnement formatives et soignantes. Elles permettent d’apprendre comment l’expérience du corps et de son mouvement interne conduit au développement de la conscience et de la présence à soi ainsi qu’à l’autre, des qualités enviables pour des professionnelles et professionnels de la relation d’aide du secteur de la santé. Dans ces pratiques, le corps joue un rôle central à travers quatre types d’intervention : la thérapie manuelle, la gymnastique sensorielle, l’introspection sensorielle et l’entretien verbal à propos de l’expérience corporelle. Selon Large (2009), une qualité de présence particulière se construit chez les participantes et le participant aux pratiques du Sensible. Selon lui, ceux-ci se rapprochent de leur intériorité, parviennent à verbaliser à autrui ce qu’ils ressentent et en arrivent à poser des actions qui expriment ce qu’ils deviennent. Large (2009) constate qu’ils acquièrent de la stabilité, de l’adaptabilité et de l’autonomie. À la fois plus affirmatifs, ils gagnent aussi en proximité à l’autre. Bois (2007) note un changement de représentation lié aux idées, aux valeurs, à l’image de soi et au rapport perceptif à soi. Une chercheure et des chercheurs constatent un changement de conception de la santé (Duval, 2010; Laemmlin-Cencig et Humpich, 2009). À notre connaissance, il n’y a pas eu d’étude antérieure concernant l’influence des pratiques du Sensible auprès de médecins. Nous avons exploré, le cas échéant, comment une formation aux pratiques du Sensible, suivie par des médecins, a modifié leur rapport à leur corps, à leur propre santé, à leur conception de la santé, à la qualité de leur présence à eux-mêmes, aux autres professionnelles et professionnels et aux patientes et patients. Des entretiens semi-structurés d’une durée de 90 à 105 minutes ont été effectués auprès de six médecins français (cinq femmes et un homme) ayant été formés aux pratiques du Sensible entre 2005 et 2012. Deux types d’entretiens à visée compréhensive (Kaufmann, 2011) et d’explicitation (Vermersch, 2010; 2012) ont été réalisés. Des informations ont aussi été recueillies sur la formation et les activités professionnelles des participantes et du participant. Deux démarches d’analyse ont été utilisées, entre autres pour vérifier la cohérence des résultats et augmenter la rigueur de notre projet. Notre première démarche d’analyse a été conçue à partir de deux méthodes : au départ avec l’analyse thématique et par la suite une analyse avec les catégories conceptualisantes afin de déboucher sur une théorisation ancrée. La deuxième démarche d’analyse a consisté à créer une liste de vingt-six phénomènes présents pour la majorité des entretiens suite à des discussions tenues avec notre équipe de direction. Selon nos résultats, suite à la formation aux pratiques du Sensible, les cinq participantes témoignent d’une plus grande proximité et attention à leur corps et d’une meilleure écoute de celui-ci. Cet ancrage corporel de leur présence les informe davantage sur leur mode de vie et d’existence. Il en ressort ainsi des prises de conscience importantes grâce auxquelles les participantes font des choix nouveaux pour une vie plus cohérente et recentrée sur leur intériorité. Par le fait même, elles récupèrent leur pouvoir sur leur vie comme sur leur santé. En outre, parmi les six médecins, quatre ont modifié leur conception de la santé. Celle-ci s’est en effet élargie pour inclure de nouveaux éléments, dont la qualité du rapport à soi et l’accordage entre le corps et la pensée. Le corps semble être une voie souterraine à partir de laquelle se sont réalisées des transformations dans la personne, comme si le corps devenait une interface ayant des effets sur plusieurs facettes de la personne. Ces transformations semblent avoir une influence sur la manière dont celle-ci exerce sa profession, comme si un savoir-être renouvelé de la personne transformait son savoir-faire au sein de sa pratique. Au plan de la qualité de la présence aux autres, il est rapporté que les relations professionnelles se sont améliorées pour la majorité des participantes. Des transformations personnelles semblent avoir eu des effets sur leurs relations professionnelles. Par exemple, tous témoignent d’une meilleure qualité de présence et de disponibilité aux patientes et patients. La plupart signalent l’apprentissage d’une juste distance thérapeutique et, en même temps, d’une relation plus singulière avec chaque patiente et patient. Nous constatons par notre analyse que la relation aux patientes et patients est modifiée aux plans de la communication, du toucher et de l’écoute. Le parcours de formation des étudiantes et étudiants en médecine semble créer des conditions favorisant l’épuisement (Brazeau, Schroeder, Rovi et Boyd, 2010; Colombat, Altmeyer, Barruel, Bauchetet, Blanchard, Colombat et al., 2011; Ishak, Nikravesh, Lederer, Perry, Ogunyemi et Bernstein, 2013; Llera et Durante, 2014; Rodrigues, Albiges et Blanchard, 2012). Certaines interventions de type corps / esprit semblent pouvoir minimiser cet impact (Elder, Rakel, Heitkemper, Hustedde, Harazduk, Gerik et al., 2007; Hewson, Copeland, Mascha, Arrigain, Topol et Fox, 2006; Irving, Park-Saltzman, Fitzpatrick, Dobkin, Chen et Hutchinson, 2014; Maclaughlin, Wang, Noone, Liu, Harazduk, Lumpkin et al., 2011; Motz, Graves, Gross, Saunders, Amri, Harazduk et al., 2012; Rosenzweig, Reibel, Greeson, Brainard et Hojat, 2003; Saunders, Tractenberg, Chaterji, Amri, Harazduk, Gordon et al., 2007). Notre recherche démontre chez nos participantes et notre participant que la formation aux pratiques du Sensible leur a permis de faire plusieurs gains pour leur propre santé. Il semble qu’en amont des apprentissages liés à la profession médicale, une qualité de savoir-être puisse solidifier la personne, ses apprentissages et sa future pratique médicale. Les étudiantes et étudiants en médecine seraient ainsi mieux outillés pour traverser ce cursus de formation exigent et épuisant. Il serait intéressant de reprendre la recherche auprès d’un plus grand nombre de médecins ou d’étudiantes et étudiants en médecine afin d’y observer les éléments de théorisation répétitifs inclus dans la théorisation ancrée de notre étude exploratoire. Ainsi, selon les résultats, il serait alors plus aisé de promouvoir l’apprentissage expérientiel d’approches de type corps / esprit (dont les PS) dans les cursus universitaires en médecine.

Greener methodology for the synthesis of alpha-diazocarbonyl compounds and a novel approach to dioxinone derivatives

This thesis outlines a more environmentally benign approach to diazo transfer, and the investigation of the reactivity of -diazocarbonyl compounds when subjected to transition metal and lanthanide catalysis. Extensive studies were carried out to find the optimum conditions for a greener diazo transfer methodology, and this was also applied to a continuous process for the synthesis of -diazo--ketoesters. The first chapter includes a literature review of the synthesis and subsequent reactivity of -diazocarbonyl compounds. An overview of the applications of flow chemistry for the synthesis of hazardous intermediates is also included. The applications of lanthanide catalysts in organic synthesis is also discussed. The second chapter outlines the extensive studies undertaken to determine the optimum conditions for a greener diazo transfer methodology, including base and solvent studies. Use of water as a viable solvent for diazo transfer was successfully investigated. Diazo transfer to a range of -diazo--ketoesters was achieved using 5 mol% triethylamine or DMAP in water with high conversions. Polystyrene-supported benzenesulfonyl azide as an alternative diazo transfer reagent was also explored, as well as investigations into cheaper generation of this safer reagent. This polymer-supported benzenesulfonyl azide was used with 25 mol% of base in water to achieve successful diazo transfer to a range of -diazo--ketoesters. The third chapter describes the application of the new methodology developed in Chapter 2 to a continuous processing approach. Various excellent conditions were identified for both batch and flow reactions. A series of -diazo--ketoesters were synthesised with excellent conversions using 25 mol% triethylamine in 90:10 acetone water using flow chemistry. Successful diazo transfer was also achieved using a polymer-supported benzenesulfonyl azide in water under flow conditions. The fourth chapter discusses the reactivity of -diazo--ketoesters under transition metal and lanthanide catalysis. This chapter describes the synthesis of a range of -ketoesters via transesterification, which were used to synthesise a range of novel -diazo--ketoesters that were used in subsequent decomposition reactions. A novel route to dioxinones via rhodium(II) catalysis is reported. Attempted OH and SH insertion reactions in the presence of various lanthanide(II) catalysts are outlined, leading to some unexpected and interesting rearrangement products. The experimental details, including spectroscopic and analytical data for all compounds prepared, are reported at the end of each chapter.

Melhoria do processo de lavação das rolhas de cortiça

O presente trabalho, realizado na empresa Amorim & Irmãos, S.A. teve como principal objetivo a avaliação e otimização da lavação de rolhas de cortiça técnicas, designadas por Twin Top®, em termos do perfil de consumo de reagentes químicos e do desenvolvimento da sua brancura. Para tal foi desenvolvida uma metodologia de análise de brancura de rolhas Twin Top® que serviu de base para a determinação de uma gama de brancuras aceitável. Para além disto, efetuou-se a avaliação do processo de lavação atualmente praticado e apartir do qual se realizaram os ensaios de otimização a nível laboratorial e piloto. Foram aplicados diferentes métodos de análise tais como, UV-Vis, FTIR-ATR, RMN e brancura ISO. Tendo como base de análise os espetros de refletância difusa de espetroscopia de UV-Vis foi proposta uma metodologia de determinação da brancura de rolhas Twin Top® a 457nm, adoptando as condições da Norma ISO 3688, aplicada na indústria da pasta e papel. De seguida, aplicando o método anteriormente definido, analisaram-se 1000 rolhas Twin Top® de lavação branca. Sendo que os resultados demonstraram que para rolhas dentro de especificação a brancura ISO deve estar entre os 30 e 35%. Foram ainda analisadas rolhas de diferentes classes visuais e provenientes de várias máquinas de lavação da fábrica para determinar possíveis diferenças. Para proceder à avaliação da lavação existente analisaram-se as colas usadas na produção das rolhas, um grânulo de cortiça e a matéria seca do efluente de lavação por FTIR-ATR e RMN. Desta avaliação resultou a presença de compostos de cortiça e cola degradada no efluente de lavação. Determinou-se a concentração dos reagentes intervenientes no processo que se mostraram de acordo com as especificações indicadas pelos fornecedores. Para a otimização da lavação combinou-se o peróxido de hidrogénio e hidróxido de sódio em diferentes quantidades, concentrações e diferentes tempos de reação o que permitiu identificar a melhor alternativa à lavação convencional. Assim existem duas propostas que devem ser tidas em consideração: uma em que a lavação mantém a mesma sequência da convencional e em que se altera o local de adição dos reagentes, que deve ser o mais próxima e direta possível das rolhas, e a outra em que se reduz o tempo do processo em 29,3 min, que compreende apenas uma oxidação e em que a quantidade de reagentes aplicada corresponde à soma dos volumes de reagentes das três oxidações do processo convencional.

Towars a chemical reagents and residues management at the teaching laboratories of the Chemistry School of the Universidad Nacional

The academic activities carried out at the School of Chemistry make indispensable to develop actions oriented toward the consolidation of a reagent and residue management system, especially in the teaching laboratories. The project “Management of reagents and residues in the teaching laboratories of the School of Chemistry” works under the Green Chemistry values which designs products and chemical processes that reduce or eliminate the use and production of dangerous substances, to benefit the environment. With a preventive vision, a change from the  laboratory practices is looked to select those with less environmental impact. Additionally, residue quantification is made and its management protocols are developed for each practice. The project has several stages: diagnose, action implementation, student, teacher and administration personnel training and evaluation during the process and at the end of it. The article describes methodological aspects of the project operation emphasizing on reagent and residue quantification through flow diagrams.

Obtenção de um hidrogel proveniente de proteínas da corvina (micropogonias furnieri) e solubilização das proteínas fibrosas residuais

Com o aumento na captura de pescado e da poluição do meio ambiente, esta-se à margem de exceder a estimativa do limite da sustentabilidade, e obviamente isto faz com se utilize os recursos marítimos com mais inteligência e precaução. Aplicando tecnologia enzimática ou química é possível recuperar as proteínas do processamento do pescado, produzindo hidrolisados e isolados protéicos. Uma grande quantidade de proteínas insolúveis está disponível em escamas, peles e ossos, subprodutos do processamento do pescado, que podem ser solubilizadas através de fungos e bactérias. Utilizando isolados protéicos é possível obter biopolímeros, estes têm chamado a atenção nos últimos anos, pois são biodegradáveis, não-tóxicos e geralmente biocompatíveis. Os hidrogéis protéicos são polímeros que podem absorver uma quantidade de água a partir de 10 até centenas de vezes o seu peso seco. O objetivo deste trabalho foi desenvolver um hidrogel protéico, com propriedades superabsorventes, a partir das proteínas solúveis e insolúveis da corvina (Micropogonias furnieri). Para a produção dos hidrolisados a partir das proteínas solúveis foi utilizado processo enzimático (Alcalase e Flavourzyme) e químico (solubilização ácida e alcalina). Nos processos de solubilização das proteínas insolúveis foram utilizados microrganismos (bactérias e fungos). Tanto as bactérias como os fungos avaliados apresentaram capacidade de solubilizar as proteínas insolúveis presentes nos resíduos (escamas, ossos, cartilagens e outros). A bactéria que atingiu a maior atividade proteolítica foi a Bacillus velesensis (47,56 U mL-1) e o fungo foi o Penicillium sp. (E20) (31,20 U mL-1). Para a produção dos hidrogéis, foram utilizados isolados protéicos provenientes de solubilização ácida ou alcalina, produzidos a partir de resíduos da industrialização de pescado, modificados quimicamente com dianidrido etilenodiamino tetraacético (EDTAD) e adicionados de agente de ligação cruzada (glutaraldeído). Algumas proteínas modificadas ainda foram submetidas a tratamento com etanol. Foram realizadas análise estrutural das proteínas modificadas e estudo da capacidade de retenção de água dos hidrogéis assim obtidos. Os hidrogéis produzidos apresentaram alta capacidade de retenção de água. A máxima absorção de água foi alcançada pelo hidrogel ácido sem o tratamento com etanol foi de 103,25 gágua/ggel seco, enquanto que a mesma amostra tratada com etanol alcançou 216,05 gágua/ggel seco. Os hidrogéis produzidos podem ser utilizados em diversas indústrias, tais como, farmacêutica, alimentícia, médica, agroindústria, entre outras, que necessitem de hidrogéis com alta capacidade de retenção de água.

Toxic metal recovery from spent hydroprocessing catalyst

Spent hydroprocessing catalysts (HPCs) are solid wastes generated in refinery industries and typically contain various hazardous metals, such as Co, Ni, and Mo. These wastes cannot be discharged into the environment due to strict regulations and require proper treatment to remove the hazardous substances. Various options have been proposed and developed for spent catalysts treatment; however, hydrometallurgical processes are considered efficient, cost-effective and environmentally-friendly methods of metal extraction, and have been widely employed for different metal uptake from aqueous leachates of secondary materials. Although there are a large number of studies on hazardous metal extraction from aqueous solutions of various spent catalysts, little information is available on Co, Ni, and Mo removal from spent NiMo hydroprocessing catalysts. In the current study, a solvent extraction process was applied to the spent HPC to specifically remove Co, Ni, and Mo. The spent HPC is dissolved in an acid solution and then the metals are extracted using three different extractants, two of which were aminebased and one which was a quaternary ammonium salt. The main aim of this study was to develop a hydrometallurgical method to remove, and ultimately be able to recover, Co, Ni, and Mo from the spent HPCs produced at the petrochemical plant in Come By Chance, Newfoundland and Labrador. The specific objectives of the study were: (1) characterization of the spent catalyst and the acidic leachate, (2) identifying the most efficient leaching agent to dissolve the metals from the spent catalyst; (3) development of a solvent extraction procedure using the amine-based extractants Alamine308, Alamine336 and the quaternary ammonium salt, Aliquat336 in toluene to remove Co, Ni, and Mo from the spent catalyst; (4) selection of the best reagent for Co, Ni, and Mo extraction based on the required contact time, required extractant concentration, as well as organic:aqueous ratio; and (5) evaluation of the extraction conditions and optimization of the metal extraction process using the Design Expert® software. For the present study, a Central Composite Design (CCD) method was applied as the main method to design the experiments, evaluate the effect of each parameter, provide a statistical model, and optimize the extraction process. Three parameters were considered as the most significant factors affecting the process efficiency: (i) extractant concentration, (ii) the organic:aqueous ratio, and (iii) contact time. Metal extraction efficiencies were calculated based on ICP analysis of the pre- and post–leachates, and the process optimization was conducted with the aid of the Design Expert® software. The obtained results showed that Alamine308 can be considered to be the most effective and suitable extractant for spent HPC examined in the study. Alamine308 is capable of removing all three metals to the maximum amounts. Aliquat336 was found to be not as effective, especially for Ni extraction; however, it is able to separate all of these metals within the first 10 min, unlike Alamine336, which required more than 35 min to do so. Based on the results of this study, a cost-effective and environmentally-friendly solventextraction process was achieved to remove Co, Ni, and Mo from the spent HPCs in a short amount of time and with the low extractant concentration required. This method can be tested and implemented for other hazardous metals from other secondary materials as well. Further investigation may be required; however, the results of this study can be a guide for future research on similar metal extraction processes.

Greener Alternatives to Selected Organic Oxidation Reactions

The study of green chemistry is dedicated to eliminating or reducing toxic waste. One route to accomplish this goal is to explore alternative reaction conditions and parameters resulting in the development of more benign synthetic routes and reagents. The primary focus of this research is to find optimal reaction conditions for the oxidation of a primary alcohol to an aldehyde. As a case study, the oxidation of benzyl alcohol to benzaldehyde, a common industrial process, was examined. Traditionally carried out using the Jones Reagent, commonly referred to as chromium (IV) oxide or chromium trioxide (CrO3) in sulphuric acid, a great deal of research went into utilizing less toxic reagents, such as MnO2 or KMnO4 supported on a clay base. This research has led to an improvement on these alternatives, using a lithium chloride (LiCl) catalyst in a montmorillonite K10 clay solid phase, together with the oxidizing agent hydrogen peroxide, as even greener alternatives to these traditional oxidizing agents. Experiments were carried out to determine the lifetime of this LiCl/clay system as compared to MnO2 and KMnO4, to investigate its ability to catalyze the oxidation of other aromatic alcohols (such as 4-methoxybenzyl alcohol and diphenylmethanol), and to further improve the system’s adherence to green chemistry principles. Green solvent alternatives were examined by replacing the toluene solvent with dimethylcarbonate (DMC), and reaction conditions were optimized to improve product yield. It was determined that the LiCl/H2O2 system was, in most cases, equally as effective at catalyzing the oxidation of benzyl alcohol to benzaldehyde. Although the catalyst and oxidizing agent eliminated the toxic waste generated from chromium reagents, it offered significant challenges in product isolation, because of an aqueous-organic phase separation.

High glucose mediates prooxidant and antioxidant enzyme activities in coronary endothelial cells

Objective: Excess levels of free radicals such as nitric oxide (NO) and superoxide anion (O2-)are associated with the pathogenesis of endothelial cell dysfunction in diabetes mellitus. This study was designed to investigate the underlying causes of oxidative stress in coronary microvascular endothelial cells (CMEC) exposed to hyperglycaemia. Methods: CMEC were cultured under normal (5.5 mmol/L) or high glucose (22 mmol/L)concentrations for 7 days. The activity and expression (protein level) of eNOS, iNOS, NAD(P)H oxidase and antioxidant enzymes, namely, superoxide dismutase (SOD), catalase and glutahione peroxidase (GPx) were investigated by specific activity assays and Western analyses,respectively while the effects of hyperglycaemia on nitrite and O2 - generation were investigated by Griess reaction and cytochrome C reduction assay, respectively. Results: Hyperglycaemia did not alter eNOS or iNOS protein expressions and overall nitrite generation, an index of NO production. However, it significantly reduced the levels of intracellular antioxidant glutathione by 50% (p<0.05) and increased the protein expressions and/or activities of p22-phox, a membrane-bound component of pro-oxidant NAD(P)H oxidase and antioxidant enzymes (p<0.05). Free radical-scavengers, namely, Tiron and MPG (0.1-1 mol/L) reduced hyperglycaemia-induced antioxidant enzyme activity and increased glutathione and nitrite generation to the levels observed in CMEC cultured in normoglycaemic medium (p<0.01). The differences in enzyme activity and expressions were independent of the increased osmolarity generated by high glucose levels as investigated by using equimolar concentrations of mannitol in parallel experiments. Conclusions: These results suggest that hyperglycaemia-induced oxidative stress may arise in CMEC as a result of enhanced prooxidant enzyme activity and diminished generation of 3 antioxidant glutathione. By increasing the antioxidant enzyme capacity CMEC may protect themselves against free radical-induced cell damage in diabetic conditions. The definitive version is available at http://www.blackwell-synergy.com

Potencial antifúngico, antioxidante e inibidor da produção de aflatoxina por extratos fenólicos de Chlorella sp. e Spirulina platensis

A contaminação fúngica acarreta alterações na qualidade nutricional e no valor econômico de produtos alimentícios podendo causar danos patológicos em plantas, animais e humanos. A identificação da atividade antioxidante, antifúngica e antimicotoxinas, em extratos de microalgas com propriedade de inibir a multiplicação de fungos e subseqüente produção de micotoxinas abre a perspectiva de empregar substâncias mais eficientes e com maior ação específica contra estes microorganismos. Entre os compostos com propriedades inibidoras de radicais livres, de crescimento fúngico e produção de micotoxinas, destacam-se os compostos fenólicos, que podem inibir a atividade metabólica microbiana, dificultando a atividade de enzimas. Neste estudo foram avaliados o poder de inibição de multiplicação fúngica de Rhizopus oryzae e Aspergillus flavus pelos extratos fenólicos de Chlorella sp. e Spirulina platensis, bem como sua atividade antioxidante, e a atividade antimicotoxinas da última microalga contra Aspergillus flavus. O conteúdo de fenóis totais foi em média 1000 µgfenóis/g Spirulina platensis e 600 µgfenóis/g Chlorella sp., sendo que o acido gálico e o cafeíco foram identificados como compostos majoritários na Spirulina platensis. As determinações de glicosamina (parede celular) e ergosterol (membrana celular) mostraram-se bons indicativos do desenvolvimento microbiano permitindo uma boa estimativa da inibição dele. O extrato fenólico de Spirulina platensis apresentou capacidade de inibir cerca de 50% a formação da parede e da membrana celular para ambos os fungos estudados e de 100% a produção de aflatoxina B1 até o 10º dia de cultivo do Aspergillus flavus. Além disso, o extrato metanólico de Spirulina platensis inativou 53,5% o DPPH reativo, limitou o escurecimento enzimático ocasionado pela peroxidase em 55% e inibiu a peroxidação lipídica em 46% após 14 dias de armazenamento sob luz. Estes resultados mostram que a ação antifúngica, antimicotoxinas e antioxidante está naturalmente presente em alguns tecidos microbianos e que encontrar a forma de extraí-los e aplicá-los como conservantes alimentícios é muito promissor para substituição aos antifúngicos e outros conservantes químicos.

Importancia del “efecto rebote” o paradoja de Jevons en el diseño de la política ambiental

En este artículo de reflexión, se analiza el diseño actual de las políticas ambientales en Colombia, las cuales se han centrado principalmente en el aprovechamiento de los recursos naturales como fuentes de materiales y energía para generar crecimiento económico. En este sentido, es evidente que la preocupación colectiva por el manejo de la oferta ambiental, como base para el desarrollo sostenible establecido en la Constitución, no ha logrado implementarse de forma efectiva, principalmente por el enfoque reactivo y coercitivo de las políticas y normativas vigentes, aunadas a un escaso fomento para la transformación del estilo de vida consumista nacional, situación que ha generado un efecto rebote incrementando los niveles de uso y consumo de los recursos naturales (especialmente de los denominados no renovables) y limitado la eficiencia energética; por ejemplo, esto puede observarse en el sector minero-energético nacional. Considerando que existe una preocupación global por la sostenibilidad, es necesario que el diseño de las políticas ambientales nacionales se aleje del optimismo económico y tecnológico del modelo económico vigente e incorpore, de forma cierta en sus políticas, estrategias que permitan equilibrar las relaciones de oferta y demanda de los servicios ambientales que sustentan el desarrollo nacional, alentando, al tiempo, el consumo responsable de la población colombiana, además de atender las iniciativas comunitarias de regulación e inclusión social en el manejo de los bienes y servicios ambientales para generar procesos de sostenibilidad fuerte.