NSAM-derived total surface area vs. SMPS-derived "mobility equivalent" surface area for different environmentally relevant aerosols

The surface area of inhaled particles deposited in the alveolar region, as reported by the TSI nanoparticle surface area monitor (NSAM), was compared with the corresponding value estimated by a TSI scanning mobility particle sizer (SMPS) for a range of environmentally relevant aerosols, including petrol emissions, ETS, laser printer emissions, cooking emissions and ambient aerosols. The SMPS values were based on a mobility size distribution assuming spherical particles using the appropriate size-dependent alveolar-deposition factors provided by the ICRP. In most cases, the two instruments showed good linear agreement. With petrol emissions and ETS, the linearity extended to over 103 μm2 cm-3. With printer emissions, there was good linearity up to about 300 μm2 cm-3 while the NSAM increasingly overestimated the surface area at higher concentrations. The presence of a nucleation event in ambient air caused the NSAM to over-estimate the surface area by a factor of 2. We summarize these results and conclude that the maximum number concentration up to which the NSAM is accurate clearly depends on the type of aerosol being sampled and provide guidance for the use of the instrument.

First measurements of source apportionment of organic aerosols in the Southern Hemisphere

An Aerodyne Aerosol Mass Spectrometer was deployed at five urban schools to examine spatial and temporal variability of organic aerosols (OA) and positive matrix factorization (PMF) used for the first time in the Southern Hemisphere to apportion the sources of the OA across an urban area. The sources identified included hydrocarbon-like OA (HOA), biomass burning OA (BBOA) and oxygenated OA (OOA). At all sites, the main source was OOA, which accounted for 62–73% of the total OA mass and was generally more oxidized compared to those reported in the Northern Hemisphere. This suggests that there are differences in aging processes or regional sources in the two hemispheres. Unlike HOA and BBOA, OOA demonstrated instructive temporal variations but not spatial variation across the urban area. Application of cluster analysis to the PMF-derived sources offered a simple and effective method for qualitative comparison of PMF sources that can be used in other studies.

Alveolar dose of ultrafine particles for children in urban environments

The aim of this study was to quantify school children’s exposure to ultrafine particles (UFP) in urban environments. The study was conducted as part of a larger epidemiological project aiming to determine the association between exposures to UFPs and children’s health, titled “Ultrafine Particles from Traffic Emissions and Children’s Health”1 (UPTECH). School children aged 8-11 years old at 24 state schools within the Brisbane Metropolitan Area participated in the present study. This paper presents the methodology and results for calculating deposited UFP surface area in the alveolar region (dose), where UFP deposition is more efficient for particles larger than 6 nm...

A portrayal of new entrants into the Australian economy (Entrepreneurial individuals and ventures)

This paper provides a descriptive overview of the venture creation in Australia, those who participate in it and the types of firms they build. Findings of interest in this paper include: • The majority of business founders (89 per cent) state the motivation to start a new business is opportunity-driven rather than necessity driven. • The extent of under-representation of women business founders in Australia appears to be lower than international comparisons and has decreased over time. • Australian business founders tend to possess significant ‘human capital’ many are university-educated, and large shares have different types of experience that may benefit the start-up. • The major industries for start-up activities are Retailing; various service industries (Business Consulting; Health, Education and Social; other Consumer services); Construction, Manufacturing, and Agriculture. • A large proportion of CAUSEE respondents (49 per cent nascent firms and 46 per cent young firms) are members of start-up teams, which is similar to international comparisons.

Illustrating outcomes for Australian nascent and young firm entrepreneurial activity

This paper examines the outcomes of nascent and young entrepreneurial firms in Australia. Findings of interest in this paper include: • After three years similar proportions of nascent firms reach an operational state (31 per cent), i.e. sales regularly exceed costs, compared with those that have terminated (35 per cent), and those who are still trying to achieve venture creation (34 per cent). This outcome closely mirrors the outcomes in the US PSED study. • The young firm sample shows that these new ventures remain more robust to firm closure. The vast majority of young firms (78 per cent) continue to be active in the market the last time they participated in CAUSEE. • The annual termination rate for young firms is 9 per cent at most, and 14 per cent cumulatively, while cumulatively only 8 per cent of young firms experience a drop-off in activity to be considered as having uncertain status. • The average number of employees in Nascent Firms is one person, the average number of Young Firm employees increases from two at first sampling to three after three years. • While the founders of exiting Nascent Firms are more likely to return to their old job upon termination of their business, Young Firm founders move on to new jobs. Regardless the majority of exiting firm founders rate their experience as positive and are prepared to attempt business creation in the future.

Innovation and change in new ventures

This paper examines the innovativeness of nascent and young entrepreneurial firms in Australia. Findings of interest in this paper include: • The vast majority of new ventures offer some degree of innovation in some aspect of their business, be it the product, the process, their market selection or their marketing approach. • With close to 75 per cent claiming they do more than taking mere imitations to the market, novelty in the product/service is the type of innovation most commonly offered by start-up firms. • The innovativeness of start-ups varies by industry. Construction start-ups stand out as particularly low in innovation across all indicators, while Manufacturing stands out the most in the positive direction. • Team start-ups other than spouse teams have higher novelty, as do ventures started by founders with prior start-up experience. • There is no association between the founders’ level of education and the novelty of the ventures they (try to) create.

What it means to be green : an examination of early stage environmental and sustainability focused firms

This paper examines ‘green’ entrepreneurial nascent and young firms in Australia. Findings of interest in this paper include: • Green entrepreneurs are more likely to be highly educated and have an extended depth of experience within their industry and are more likely to have started a business prior to their current venture. • Green entrepreneurs exhibit increased levels of innovation, with an increased focus on new & high technology, R&D and the development of proprietary technology. • Green entrepreneurs are most likely to be based upon a product rather than a service and have a higher emphasis upon growth when compared with non-green entrepreneurs. • Green entrepreneurial firms tend to have a longer venture creation process and draw financial resources from a larger number of sources and rely more upon equity as a means of financing their venture.

New venture internationalisation

This paper investigates the international background and international activities of Australian start-up firms. Findings of interest in this paper include: • Due to their small scale, young age and distant location firm founders then to favour the domestic market rather that engage internationally. • Firms that do engage internationally tend to do so at the very early stages of venture creation. • Firms that do engage in exporting activities tend to rely on intermediaries rather than more direct forms of export actions.

Capturing gazelles : features of high potential firms and new venture growth

This paper investigates the characteristics of ventures which have the potential to reach high growth and compares this with ‘everyday’ new ventures. Findings of interest in this paper include: • HP firms are characterised by higher human capital, are more likely to have a team of founders, are more likely to be product based. • HP firms are more likely to achieve more extreme levels of growth (both positive and negative). • HP ventures that make a loss are more likely to do so early in the venture process. Those that do hold on show that there can higher levels of loss made later on in firm development. HP firms have higher resource needs, in terms of seeking external finance, but are no more likely to receive external finance than regular firms.

Unpacking the venture creation process

This paper investigates the dimensions of time and effort and how these factors impact on the venture creation process in Australia. Findings of interest in this paper include: • First and foremost business planning is used as a thinking tool within the boundaries of the firm. • Business planning is more strongly associated with firms that are more ambitious, being built by teams, draw on more experience or education. • Industry characteristics in part drive the duration required for venture creation. Manufacturing and Agriculture based firms seemingly take longer timeframes than other industries. Extended venture creation times frames are also associated with firms that aim to bring more novel concepts to market.

Identifying important success factors in new venture creation

This paper seeks to uncover the factors that lead to a successful entrepreneurial experience and or venture. Findings of interest in this paper include: • A venture’s initial aspirations are a double edged sword. Ambition may lead to improved performance by striving to reach harder goals. Harder goals are more difficult therefore this may lead to some dissatisfaction, and possibly abandonment of the venture. • Venture legitimacy is important to establish where possible. Firms that formalize their legal form are more successful, as are those set up a shop-front in order to makes sales. • Increased use of technology and higher levels of novelty does not guarantee success early on. Firms of this nature have longer processes, and attempting to create brand new markets is difficult to achieve. At the same time developing your own technology and securing this intellectual property is important for success. • Having goals to work towards and business planning may be useful, but only if the plan is actively revised. Just having a business plan does not matter. Business plans are more useful as a thinking tool than as a blueprint for action. It is the process of thinking through while reviewing the plan that provides the benefit, not following its instruction to the letter.

Preferential invasion by Plasmodium merozoites and the self-regulation of parasite burden

The preferential invasion of particular red blood cell (RBC) age classes may offer a mechanism by which certain species of Plasmodia regulate their population growth. Asexual reproduction of the parasite within RBCs exponentially increases the number of circulating parasites; limiting this explosion in parasite density may be key to providing sufficient time for the parasite to reproduce, and for the host to develop a specific immune response. It is critical that the role of preferential invasion in infection is properly understood to model the within-host dynamics of different Plasmodia species. We develop a simulation model to show that limiting the range of RBC age classes available for invasion is a credible mechanism for restricting parasite density, one which is equally as important as the maximum parasite replication rate and the duration of the erythrocytic cycle. Different species of Plasmodia that regularly infect humans exhibit different preferences for RBC invasion, with all species except P. falciparum appearing to exhibit a combination of characteristics which are able to selfregulate parasite density.

Graphene-based thin film supercapacitor with graphene oxide as dielectric spacer

Thin film supercapacitors are produced by using electrochemically exfoliated graphene (G) and wet-chemically produced graphene oxide (GO). Either G/GO/G stacked film or sole GO film are sandwiched by two Au films to make devices, where GO is the dielectric spacer. The addition of graphene film for charge storage can increase the capacitance about two times, compared to the simple Au electrode. It is found that the GO film has very high dielectric constant, accounting for the high capacitance of these devices. AC measurements reveal that the relative permittivity of GO is in the order of 104 within the frequency range of 0.1–70 Hz.

A framework for cost-aware process management : cost reporting and cost prediction

Organisations are constantly seeking efficiency gains for their business processes in terms of time and cost. Management accounting enables detailed cost reporting of business operations for decision making purposes, although significant effort is required to gather accurate operational data. Process mining, on the other hand, may provide valuable insight into processes through analysis of events recorded in logs by IT systems, but its primary focus is not on cost implications. In this paper, a framework is proposed which aims to exploit the strengths of both fields in order to better support management decisions on cost control. This is achieved by automatically merging cost data with historical data from event logs for the purposes of monitoring, predicting, and reporting process-related costs. The on-demand generation of accurate, relevant and timely cost reports, in a style akin to reports in the area of management accounting, will also be illustrated. This is achieved through extending the open-source process mining framework ProM.

Influence of nitrogen fertiliser application and timing on greenhouse gas emissions from a lychee (Litchi chinensis) orchard in humid subtropical Australia

Nitrous oxide emissions from intensive, fertilised agricultural systems have been identified as significant contributors to both Australia's and the global greenhouse gas (GHG) budget. This is expected to increase as rates of agriculture intensification and land use change accelerate to support population growth and food production. Limited data exists on N2O trace gas fluxes from subtropical or tropical tree cropping soils critical for the development of effective mitigation strategies.This study aimed to quantify GHG emissions over two consecutive years (March 2007 to March 2009) from a 30 year (lychee) orchard in the humid subtropical region of Australia. GHG fluxes were measured using a combination of high temporal resolution automated sampling and manually sampled chambers. No fertiliser was added to the plots during the 2007 measurement season. A split application of nitrogen fertiliser (urea) was added at the rate of 265kgNha-1 during the autumn and spring of 2008. Emissions of N2O were influenced by rainfall events and seasonal temperatures during 2007 and the fertilisation events in 2008. Annual N2O emissions from the lychee canopy increased from 1.7kgN2O-Nha-1yr-1 for 2007, to 7.6kgN2O-Nha-1yr-1 following fertiliser application in 2008. This represented an emission factor of 1.56%, corrected for background emissions. The timing of the split application was found to be critical to N2O emissions, with over twice as much lost following an application in spring (2.44%) compared to autumn (EF: 1.10%). This research suggests that avoiding fertiliser application during the hot and moist spring/summer period can reduce N2O losses without compromising yields.