Influence of the estrous cycle on the behavior of rats in the elevated T-maze

The elevated T-maze is an animal anxiety model which can discriminate between anxiety-like and fear-like behaviors. The estrous cycle is an important variable of the response in animal anxiety tests and is known to affect other models. The aim of the present study was to investigate the influence of the estrous cycle on behavior displayed in the elevated T-maze test. Seventeen male and 60 female rats were submitted to one session in this test, with the females being screened for the estrous cycle and divided into groups according to the various phases. The elevated T-maze had three arms of equal dimensions (50 cm x 10 cm), one enclosed by 40-cm high walls and perpendicular to the others, the apparatus being elevated 50cm above the floor. Each rat was placed in the end of the enclosed arm and the latency for it to leave this arm was recorded. These measurements were repeated three times separated by 30-s intervals (passive avoidance). After trial 3, each rat was placed at the distal end of the right open arm and the latency to exit this arm was recorded. Whenever latencies were greater than 300 s the trial was finished. The results demonstrated females in diestrus exhibited anxiety-like behaviors while females in metaestrus behaved in a similar way as the males. There were no differences between groups in fear-like behaviors. The results also indicate the elevated T-maze to be a sensitive test to measure anxiety. (C) 2004 Elsevier B.V. All rights reserved.

Multiflavor soldering

In two dimensions the simple addition of two chiral bosons of opposite chiralities does not lead to a full massless scalar field. Similarly, in three dimensions the addition of two Maxwell-Chern-Simons fields of opposite helicities +/- 1 will not produce a parity invariant Maxwell-Proca theory. An interference term between the opposite chiralities (helicities) states is required in order to obtain the expected result. The so-called soldering procedure provides the missing interference Lagrangian in both 2D and 3D cases. In two dimensions such interference term allows to fuse two chiral fermionic determinants into, a non-chiral one. In a recent work we have generalized this procedure by allowing the appearance of an extra parameter which takes two possible values and leads to two different soldered Lagrangians. Here we apply this generalized soldering in a bosonic theory which has appeared in a partial bosonization of the 3D gauged Thirring model with N flavors. The multiplicity of flavors allow new types of solderings and help us to understand the connection between different perturbative approaches to bosonization in 3D. In particular, we obtain an interference term which takes us from a multiflavor Niaxwell-Chern-Simons theory to a pair of self-dual and anti-self-dual theories when we combine together both fermionic determinants of +1/2 and -1/2 helicity fermions. An important role is played by a set of pure non-interacting Chern-Simons fields which amount to a normalization factor in the fermionic determinants and act like spectators in the original theory but play an active role in the soldering procedure. Our results suggest that the generalized soldering could be used to provide dual theories in both 2D and 3D cases. (c) 2007 Elsevier B.V. All rights reserved.

Dirac equation exact solutions for generalized asymmetrical Hartmann potentials

In this work we solve the Dirac equation by constructing the exact bound state solutions for a mixing of vector and scalar generalized Hartmann potentials. This is done provided the vector potential is equal to or minus the scalar potential. The cases of some quasi-exactly solvable and Morse-like potentials are briefly commented. (c) 2006 Elsevier B.V. All rights reserved.

Estudo integrado do potencial fitorremediador da Eichhornia crassipes em ambientes naturais e sua utilização para obtenção de extratos proteicos

This study aimed to analyze the phytoremediation potential of Eichhornia crassipes in natural environments, optimize the extraction process of crude protein from plant tissue and, obtain and characterize this process in order to determine its viability of use instead of the protein sources of animal and/or human feed. For this, it has been determined in Apodi/Mossoró river water the concentration of ammonium ions, nitrite, nitrate, calcium, magnesium, potassium, iron, copper, manganese, zinc, nickel, cobalt, sodium, aluminum, cádmium, lead, and total chromium; It was determined in plant tissue of aquatic macrophytes of Eichhornia crassipes species present in Apodi/Mossoró River the moisture content, ash, calcium, magnesium, potassium, iron, copper, manganese, zinc, nickel, cobalt, sodium, aluminum, cadmium, lead, total chromium, total nitrogen and crude protein. It was also determined the translocation factor and bioaccumulation of all the quantified elements; It was developed and optimized the extraction procedure of crude protein based on the isoelectric method and a factorial design 24 with repetition; It was extracted and characterized the extract obtained by determining the moisture content, ash, magnesium, potassium, iron, copper, manganese, zinc, nickel, cobalt, sodium, cadmium, total nitrogen and crude protein. And finally, it was also characterized the protein extract using Thermogravimetric Analysis (TG), Derived Thermogravimetric (DTG), Differential Scanning Calorimetry (DSC), Infrared Spectroscopy (FT-IR) and jelly-like electrophoresis of polyacrylamide (SDS -PAGE) to assess the their molecular weights/mass. Thus, from the results obtained for the translocation and bioaccumulation factors was found that the same can be used as phytoremediation agent in natural environments of all quantified elements. It was also found that the developed method of extraction and protein precipitation was satisfactory for the purpose of the work, which gave the best conditions of extraction and precipitation of proteins as: pH extraction equal to 13.0, extraction temperature equals 60 ° C, reaction time equals to 30 minutes, and pH precipitation equals to 4.0. As for the extract obtained, the total nitrogen and crude protein were quantified higher than those found in the plant, increasing the crude protein content approximately 116.88% in relation to the quantified contente in the vegetal tissue of macrophyte. The levels of nickel and cadmium were the unique that were found below the detection limit of used the equipment. The electrophoretic analysis allowed us to observe that the protein extract obtained is composed of low polypeptide chains by the molecular and phytochelatins, with 6 and 15 kDa bands. Analysis of TG, DTG, DSC and FT-IR showed similarities in protein content of the obtained extracts based on different collection points and 9 parts of the plant under study, as well as commercial soy protein and casein. Finally, based on all these findings, it was concluded that the obtained extract in this work can be used instead of the protein sources of animal feed should, before that, test its digestibility. As human supplementation, it is necessary to conduct more tests associated with the optimization process in the sense of removing undesirable components and constant monitoring of the water body and the raw material used

AIGA: um ambiente integrado de gerência para redes em malha sem fio IEEE 802.11s

A Wireless Mesh Network (WMN - Wireless Mesh Network) IEEE 802.11s standard to become operational it is necessary to configure the parameters that meet the demands of its users, as regards, for example, the frequency channels, the power antennas, IPs addresses, meshID, topology, among others. This configuration can be done via a CLI (Command - Line Interface) or a remote interface provided by the equipment manufacturer, both are not standardized and homogeneous, like black boxes for the developers, a factor that hinders its operation and standardization. The WMN, as a new standard, is still in the testing phase, and tests are necessary to evaluate the performance of Path Discovery Protocol, as in this case of HWMP (Hybrid Wireless Mesh Protocol), which still has many shortcomings. The configuration and test creation in a WMN are not trivial and require a large workload. For these reasons this work presents the AIGA, a Management Integrated Environment for WMN IEEE 802.11s, which aims to manage and perform testbeds for analyzes of new Path Discovery Protocols in a WMN

Competitividade de destinos turísticos e o imperativo sustentável: avaliação de dimensões e atributos condicionantes no Pólo Costa das Dunas, RN, Brasil

Being available as a tourist destination is a necessary condition but not enough for the expansion and success of tourism activity. To be successful, tourism requires investment, inputs, appropriate planning and management, like any other economic activity. A fundamental goal of the destination management is to understand how the competitiveness of a tourist destination can be improved and sustained. Competitive position of tourism can be measured and assessed by various models. Evaluating the indicators of competitiveness of a tourist destination involves a multivariate analysis, ranging from issues directly related to tourism activity itself to the indirect factors. These are elements that are interrelated and that together will point out the competitive condition of this destination. From the definition and characterization of competitiveness, sustainability and management in the context of tourist destinations, understood as the main concepts of this study, we present the main theoretical and methodological models of assessment of competitiveness of tourist destinations in the literature and represent the state of the issue in the scientific treatment of the subject. These models, designed by researchers from several countries and applied in different tourist destinations, are confronted about their structure, indicators considered and localities in which they were applied. The aim of this study was to know and evaluate the condition of tourist competitiveness of the destination Pólo Costa das Dunas, from the constraints attributes of superior performance of the evaluation model of tourist competitiveness of destinations Competenible, suggested by Mazaro, and that suit the requirements of international market aware of the strength and importance of sustainability. The condition of competitiveness of tourist destination in Rio Grande do Norte Pólo Costa das Dunas was moderate. The competitive strengths and weaknesses of the destination Pólo Costa das Dunas revealed through the dozens of sustainable attributes of the model Competenible showed guidelines and initiatives that can be taken to guide strategic decisions related to their planning and management. Thus, this study should serve as support for strategic planning and long-term management of the sector and as a crucial tool for making decisions related to public policies, sectoral investments, monitor processes, strategic planning, direction and control of the local and regional tourism development of destinations

Dietary whey protein lessens several risk factors for metabolic diseases: a review

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Diferenciação de espécies daninhas aquáticas pela análise multivariada de caracteres estruturais foliares

Algumas espécies de plantas aquáticas têm-se tornado problemáticas em reservatórios hidrelétricos no Brasil, devido a sua grande capacidade de reprodução. O objetivo destes trabalho foi diferenciar Brachiaria mutica, Brachiaria subquadripara, Panicum repens, Eichhornia crassipes, Heteranthera reniformis, Typha ubulata e Enhydra anagallis, utilizando-se 19 caracteres estruturais quantitativos do limbo foliar, que se relacionassem com a penetração e translocação de herbicidas. Amostras do terço médio do limbo foram fixadas em FAA 50, cortadas transversalmente em micrótomo com 8 mm de espessura e coradas com azul-de-toluidina. Foram quantificados (%) os seguintes caracteres estruturais da nervura central (NC) e da região internervural (IN): epidermes adaxial e abaxial, feixe vascular, bainha do feixe vascular, esclerênquima, parênquima e lacunas do aerênquima, além da espessura da folha, do número de estômatos e do número de tricomas nas faces adaxial e abaxial. Os 19 caracteres estruturais foram submetidos à Análise de Agrupamento e Análise de Componentes Principais. Houve a formação de três grupos principais: grupo 1 B. mutica, B. subquadripara e P. repens (Poaceae); grupo 2 E. crassipes e H. reniformis (Pontederiaceae) e E. anagallis (Asteraceae); e grupo 3 apenas T. subulata (Typhaceae). Os caracteres com maior poder discriminatório foram: porcentagem de epiderme adaxial (IN); porcentagem de epiderme abaxial; feixe vascular; bainha do feixe vascular; esclerênquima e lacunas do aerênquima (NC e IN); espessura da folha e número de estômatos das faces adaxial e abaxial. Concluiu-se que os caracteres estruturais quantitativos permitiram diferenciar essas espécies daninhas aquáticas em fase vegetativa.

Ultrastructural analysis of the effect of mating delay on cell death in the ovaries of virgin honey bee (Apis mellifera L.) queens

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

The Role of Mucus in Mytella falcata (Orbigny 1842) Gills from Polluted Environments

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Profiling the Proteome of the Venom from the Social Wasp Polybia paulista: A Clue to Understand the Envenoming Mechanism

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Modal analysis of anisotropic diffused-channel waveguide by a scalar finite element method

A procedure to model optical diffused-channel waveguides is presented in this work. The dielectric waveguides present anisotropic refractive indexes which are calculated from the proton concentration. The proton concentration inside the channel is calculated by the anisotropic 2D-linear diffusion equation and converted to the refractive indexes using mathematical relations obtained from experimental data, the arbitrary refractive index profile is modeled by a. nodal expansion in the base functions. The TE and TM-like propagation properties (effective index) and the electromagnetic fields for well-annealed proton-exchanged (APE) LiNbO3 waveguides are computed by the finite element method.

Comparação entre folhas sombreadas de sete clones adultos de seringueira

Nas seringueiras, o substrato para a síntese do látex provém, em curto prazo, do processo fotossintético, realizado em sua maioria por folhas dos estratos sujeitos à radiação sub-saturante. Neste estudo, foram avaliados e comparados (1) os teores de pigmentos fotossintéticos (clorofilas a, b e carotenóides totais); (2) a espessura foliolar total e dos parênquimas clorofilianos; e (3) a área e peso da matéria seca foliar de folhas sombreadas, para seis clones de seringueira selecionados pelo Instituto Agronômico de Campinas (IAC), comparativamente ao tradicional clone RRIM 600. em média, os teores de clorofila total (a+b) e de carotenóides totais foram, respectivamente, de 3,14 e 1,04 mg g-1 de peso fresco, sempre superiores ou iguais ao da testemunha. A espessura foliolar média foi de 119,62 µm e mostrou grande variação entre os clones IAC, e destes quanto à testemunha. A área foliar média, de 219,17 cm², foi quase equivalente para todos os clones. A área foliar específica foi, em média, de 198,08 cm² g-1, e neste caso, o maior valor foi observado para o IAC 56, sendo os demais, inferiores ou equivalentes ao da testemunha. Os clones IAC 302 e IAC 303 mostraram-se estatisticamente similares ao RRIM 600 para todos os caracteres analisados, e uma relação com a produtividade foi sugerida para o clone IAC 303.

epsilon-Expansion for nonplanar six-propagators double boxes

We present calculations for a nonplanar double box with four massless, massive external, and internal legs propagators. The results are expressed for arbitrary exponents of propagators and dimension in terms of Lauricella's hypergeometric functions of three variables and hypergeometric-like multiple series.

Spontaneous symmetry breaking of Bose-Fermi mixtures in double-well potentials

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)