944 resultados para Gas-bearing fluid influx system
Resumo:
The microbiological monitoring of the water used for hemodialysis is extremely important, especially because of the debilitated immune system of patients suffering from chronic renal insufficiency. To investigate the occurrence and species diversity of bacteria in waters, water samples were collected monthly from a hemodialysis center in upstate São Paulo and tap water samples at the terminal sites of the distribution system was sampled repeatedly (22 times) at each of five points in the distribution system; a further 36 samples were taken from cannulae in 19 hemodialysis machines that were ready for the next patient, four samples from the reuse system and 13 from the water storage system. To identify bacteria, samples were filtered through 0.22 mu m-pore membranes; for mycobacteria, 0.45 mu m pores were used. Conventional microbiological and molecular methods were used in the analysis. Bacteria were isolated from the distribution system (128 isolates), kidney machine water (43) and reuse system (3). Among these isolates, 32 were Gram-positive rods, 120 Gram-negative rods, 20 Gram-positive cocci and 11 mycobacteria. We propose the continual monitoring of the water supplies in hemodialysis centers and the adoption of effective prophylactic measures that minimize the exposure of these immunodeficient patients to contaminated sources of water.
Resumo:
This paper proposes a different experimental setup compared with the traditional ones, in order to determine the acceleration of gravity, which is carried out by using a fluid at a constant rotation. A computerized rotational system-by using a data acquisition system with specific software, a power amplifier and a rotary motion sensor-is employed in order to evaluate the angular velocity and g. An equation to determine g is inferred from fluid mechanics. For this purpose, the fluid's parabolic shape inside a cylindrical receptacle is considered using a rotational movement.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
The potential energy surfaces at the singlet (s) and the triplet (t) electronic states associated with the gas-phase ion/molecule reactions of NbO3-, NbO5-, and NbO2(OH)(2)(-) with H2O and O-2 have been investigated by means of DFT calculations at the B3LYP level. An analysis of the results points out that the most favorable reactive channel comprises s-NbO3- reacting with H2O to give an ion-molecule complex s-NbO3(H2O)without a barrier. From this minima, an intramolecular hydrogen transfer takes place between the incoming water molecule and an oxygen atom of the NbO3- fragment to render the most stable minimum, s-NbO2(OH)(2)(-). This oxyhydroxide system reacts with O-2 along a barrierless process to obtain the triplet t-NbO4(OH)(2)(-)-A intermediate, and the crossing point, CP1, between s and t electronic states has been characterized. The next step is the hydrogen-transfer process between the oxygen atom of a hydroxyl group and the one adjacent oxygen atom to render a minimum with the two OH groups near each other, t-NbO4(OH)(2)(-)-B. From this point, the last hydrogen migration takes place, to obtain the product complex, t-NbO5(H2O)(-), that can be connected with the singlet separated products, s-NbO5- and H2O. Therefore, a second crossing point, CP2, has been localized. The nature of the chemical bonding of the key minima (NbO3-, NbO2(OH)(2)(-), NbO4(OH)(2)(-)-B, and NbO5-) in both electronic states of the reaction and an interaction with O-2 has been studied by topological analysis of Becke-Edgecombe electron-localization function (ELF) and atoms-in-molecules (AIM) methodology. The niobium-oxygen interactions are characterized as unshared-electron (ionic) interactions and some oxygen-oxygen interactions as protocovalent bonds.
Resumo:
This article presents a cooling system for cutting tool in turning based in a toolholder with cooling fluid flowing inside its body being that this fluid must necessarily be able to phase change due to heat generated from machining processes. In this way, the fluid evaporates just under the cutting tool allowing a heat transfer more efficient than if were used a fluid without phase change once the latent heat of evaporation is beneficial for removal heat. Following, the cooling fluid evaporated passes through a condenser located out of the toolholder where it is condensated and returns to the toolholder again and a new cycle is started. In this study, the R-123, a hydrochlorofluorocarbon (HCFC) fluid, was selected for the turning of a Cr-Ni-Nb-Mn-N austenitic steel of hard machinability. The machining tests were carried out under three different machining conditions: dry machining, external cutting fluid (conventional method), and with the toolholder proposed. As result, the developed system allows a surface roughness up to 10% better than dry machining and a tool life close to the conventional method, but 32% superior to dry machining; moreover, there are environmental and economics advantages once the cooling fluid is maintained in a loop circuit.
Resumo:
In the first paper of this paper (Part I), conditions were presented for the gas cleaning technological route for environomic optimisation of a cogeneration system based in a thermal cycle with municipal solid waste incineration. In this second part, an environomic analysis is presented of a cogeneration system comprising a combined cycle composed of a gas cycle burning natural gas with a heat recovery steam generator with no supplementary burning and a steam cycle burning municipal solid wastes (MSW) to which will be added a pure back pressure steam turbine (another one) of pure condensation. This analysis aims to select, concerning some scenarios, the best atmospheric pollutant emission control routes (rc) according to the investment cost minimisation, operation and social damage criteria. In this study, a comparison is also performed with the results obtained in the Case Study presented in Part I. (c) 2007 Elsevier Ltd. All rights reserved.
Resumo:
Research of advanced technologies for energy generation contemplates a series of alternatives that are introduced both in the investigation of new energy sources and in the improvement and/or development of new components and systems. Even though significant reductions are observed in the amount of emissions, the proposed alternatives require the use of exhaust gases cleaning systems. The results of environmental analyses based on two configurations proposed for urban waste incineration are presented in this paper; the annexation of integer (Boolean) variables to the environomic model makes it possible to define the best gas cleaning routes based on exergetic cost minimisation criteria. In this first part, the results for steam cogeneration system analysis associated with the incineration of municipal solid wastes (MSW) is presented. (c) 2007 Elsevier Ltd. All rights reserved.
Resumo:
Wood gasification technologies to convert the biomass into fuel gas stand out. on the other hand, producing electrical energy from stationary engine is widely spread, and its application in rural communities where the electrical network doesn't exist is very required. The recovery of exhaust gases (engine) is a possibility that makes the system attractive when compared with the same components used to obtain individual heat such as electric power. This paper presents an energetic alternative to adapt a fixed bed gasifier with a compact cogeneration system in order to cover electrical and thermal demands in a rural area and showing an energy solution for small social communities using renewable fuels. Therefore, an energetic and economical analysis from a cogeneration system producing electric energy, hot and cold water, using wooden gas as fuel from a small-sized gasifier was calculated. The energy balance that includes the energy efficiency (electric generation as well as hot and cold water system; performance coefficient and the heat exchanger, among other items), was calculated. Considering the annual interest rates and the amortization periods, the costs of production of electrical energy, hot and cold water were calculated, taking into account the investment, the operation and the maintenance cost of the equipments. Crown Copyright (C) 2010 Published by Elsevier Ltd. All rights reserved.
Resumo:
In this work we describe a two-dimensional computer simulation of magnetic field enhanced plasma immersion implantation system. Negative bias voltage of 10.0 kV is applied to a cylindrical target located on the axis of a grounded vacuum chamber filled with uniform nitrogen plasma. A pair of external coils creates a static magnetic field with main vector component along the axial direction. Thus, a system of crossed ExB field is generated inside the vessel forcing plasma electrons to rotate in azimuthal direction. In addition, the axial variation of the magnetic field intensity produces magnetic mirror effect that enables axial particle confinement. It is found that high-density plasma regions are formed around the target due to intense background gas ionization by the trapped electrons. Effect of the magnetic field on the sheath dynamics and the implantation current density of the PIII system is investigated. By changing the magnetic field axial profile (varying coils separation) an enhancement of about 30% of the retained dose can be achieved. The results of the simulation show that the magnetic mirror configuration brings additional benefits to the PIII process, permitting more precise control of the implanted dose.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
Streptococcus pneumoniae is the predominant bacterial agent that affects the human population with pneumonia. This disease is an important cause of death in the elderly and the children under five years old. In this study, 29 strains of invasive S. pneumoniae were isolated from 29 patients of pneumonia, bacteremia and meningitis in the laboratory of the Municipal Hospital in Paulinia, Brazil, from May 2006 to October 2007. Patients' age ranged from 8 months old to 60 years old. These strains of S. pneumoniae were isolated from blood, pleural fluid and cerebrospinal fluid (CSF) of patients. After typing of encapsulated strains of S. pneumoniae through quellung reaction, their resistance to antimicrobial agents was gauged through Disc Diffusion Technique followed by determination of minimum inhibitory concentration (MIC). Among the 29 strains analyzed, 23 were methicillin-sensitive and six were methicillin-resistant and penicillin intermediate resistant. No strain presented full resistance to penicillin. Serotyping was performed only in two samples, which belonged to serotype 18. Our data may alert ambulatory regarding the incidence of pneumococcal strains resistant to the most common drugs due to inappropriate use of antimicrobials and also collaborate to the elaboration of pneumococcal conjugate vaccines specific to each region.
Resumo:
Objective: To determine whether the fatty acid composition of mid-trimester amniotic fluid differs by ethnicity and pregnancy outcome. Methods: Fatty acid composition was analyzed by gas chromatography in 198 women undergoing amniocentesis at 15-19 weeks gestation. Cytokine levels were determined by ELISA in a subgroup of 52 subjects. Results: The major fatty acids detected were palmitic acid (31.8%) and stearic acid (31.5%). The n-6 polyunsaturated fatty acids (PUFA), linoleic acid (LA, 18: 2) and arachidonic acid (AA, 20: 4), were 11.3%, while the n-3 PUFA fatty acids, alpha linolenic acid (ALA, 18: 3) and docosahexaenoic acid (DHA, 22: 6), were 3.8% of the total. Palmitic acid was a higher percentage in Asians (40.5%) and Whites (34.5%) than in Blacks (22.2%) and Hispanics (23.7%) (p <= 0.0012). Oleic acid (18:1 n-9) was a higher percentage in Blacks (12.2%) and Hispanics (12.1%) than in Whites (9.2%) or Asians (7.5%) (<= 0.0002). LA and AA were higher in Blacks (9.0%, 5.4%) and Hispanics (8.6%, 4.1%) than in Whites (6.1%, 3.7%) and Asians (5.5%, 2.9%) (p <= 0.0002). DHA did not differ among the ethnic groups or according to pregnancy outcome. A reduced palmitic acid percentage was identified in the six women with preeclampsia (p = 0.0233). Tumor necrosis factor-alpha levels were inversely proportional to the palmitic acid percentage (p = 0.0275) and positively associated with the percentages of stearic (18:0) (p = 0.0132) and oleic (p = 0.0290) acids. Conclusions: Amniotic fluid fatty acid composition differed among the ethnic groups and may influence inflammatory mediator production and susceptibility to preeclampsia.
Resumo:
We compared saline (S) and sodium dodecyl sulphate (SDS) extracts from Taenia solium (homologous species - HO) and Taenia crassiceps (heterologous species - HE) metacestodes in order to detect Ige by ELISA and immunoblot assay (IBA) in cerebrospinal fluid (CSF) for the diagnosis of human neurocysticercosis (NC). CSF samples were obtained from 93 patients. of these, 40 had NC, five had a diagnosis of probable NC, nine had central nervous system schistosomiasis or strongyloidiasis and 39 had other neurological alterations. Samples were analysed by ELISA and the results were compared with IBA in all samples with confirmed and probable NC diagnosis, in all samples with other central nervous system parasitic infection, and in 10 of those with another neurological alterations. ELISA sensitivity was 100%, 85%, 95% and 87.5% for the S-HO, S-HE, SDS-HO and SDS-HE extracts, respectively, and ELISA specificity was 100% for S-HO, S-HE, SDS-HO extracts and 97.9% for SDS-HE antigen. Immunodominant peptides detected by IBA were, by decreasing percentage of recognition: 64-68 and 45 kDa for S-HO; 108-114, 92-95, 64-68, 83 and 88 kDa for S-HE; 64-68, 108-114, 77 and 86 kDa for SDS-HO; and 108-114, 88 and 92-95 kDa for SDS-HE. Overall the homologous antigenic extracts showed higher sensitivity than the heterologous extracts in the diagnosis of NC in CSF samples. The heterologous extracts contained most of the immunodominant peptides presented in the homologous extracts, which are recognized by Ige antibodies in CSF samples.
Resumo:
Linfoma multicêntrico foi diagnosticado em um cão com dois anos de idade que apresentava insuficiência respiratória, aumento de volume abdominal (ascite) e linfoadenopatia generalizada. O exame imunoistoquímico revelou origem de células T com expressão CD3+ e CD79-. Após cinco semanas, o cão apresentou déficits neurológicos progressivos, sendo identificada a presença de linfócitos neoplásicos no líquor. O exame histopatológico demonstrou invasão de células neoplásicas no baço, linfonodos, cérebro e cerebelo.