Eficiência das resinas XAD4 e C18 na extração de compostos mutagênicos presentes em efluente de refinaria de petróleo para a realização do Teste de Ames

Não disponível

Otimização da extração alcalina com peróxido de hidrogênio em seqüência de branqueamento com aplicação de baixo fator kappa

The new market, focused on sustainability and other environmental concerns, refers to innovations that seek alternative forms of production. In pulp and paper bleaching alternative reagents are studied, for example, hydrogen peroxide, in partial substitution of chlorine dioxide in order to reduce the formation of organochlorines. In this context, this study examined the burden of hydrogen peroxide (H2O2) on alkaline extraction stage (stage Ep) required for the bleaching of pulp with eucalyptus kraft pulp, pre-oxygen delignified to obtain equivalent brightness at 90 ± 0.5% ISO, as well as its effect on quality of pulp produced. The pulp was bleached by the sequence D(Ep)DP, with the application of factor kappa of 0.14 and varying the concentration of hydrogen peroxide in Ep stage three, five, seven and nine kilograms of reagent per ton of pulp absolutely drought. The final P stage was optimized with the use of six, nine and twelve pounds of hydrogen peroxide per ton of absolutely dry pulp to achieve the required brightness. The quality of the pulp produced was analyzed based on the kappa number, the brightness and the viscosity. The methods were performed according to standards set by the standard TAPPI (Technical Association of the Pulp and Paper Industry). The best result was obtained using the following D0Ep(7)D1P(6), which showed a viscosity of 19.9 cP, 89.6% ISO brightness, consumption of 94.9 kg / t of reagents and reagent costs of US$ 28.15, because it showed better pulp quality for a lower cost compared to the others. It was found that the greater the amount of hydrogen peroxide in alkaline extraction, the lower the kappa number and increased the amount of residual hydrogen peroxide. The higher the charge of hydrogen peroxide in Ep stage, the lower the need for hydrogen peroxide in the final P stage, reducing the cost of bleaching

Adesão de Paracoccidioides brasiliensis e outros fungos anemófilos a teias de aranhas: implicações para a identificação de nichos microbianos no ambiente

The dimorphic pathogenic fungus, Paracoccidioides brasiliensis (Pb), is the etiological agent of paracoccidioidomycosis (PCM), the most important systemic mycosis in Latin America. While the yeast phase can be isolated from patients affected by paracoccidioidomycosis, dogs and naturally infected armadillos; several elements related to the ecology of the saprophytic phase of the pathogen, which is responsible for the production of infective propagules, are poorly understood, hampering the adoption of preventive measures. The demonstration of the high incidence of Pb infection in the 9- banded armadillo, Dasypus novemcinctus, has opened new perspectives for the identification of the pathogen’s habitat. At the opening of the armadillos’ burrows, spider webs are commonly found. The objective of this study was to evaluate the presence of Pb in spider webs samples related to the habitat of armadillos. Spider web samples were collected at Lageado Farm, Botucatu/SP and prepared for microscopic, molecular and mycological analyses. Microscopic analysis showed that different fungi were closely attached to spider web samples. Nested-PCR reaction showed positive amplification for Pb in 4 samples, with identity confirmed by amplicon sequencing. Fungal colonies also included members of Aspergillus, Blastobotrys, Penicillium, Candida, and Sporothrix genera, which are related to opportunistic disease and primary infections of great medical importance. In vitro adhesion tests of mycelia and yeast form of Pb to the spider webs were also performed, in order to analyze the possible physical attraction between fungal cells and the spider web protein network. The results showed a clear adherence of fungal particles to spider webs. In the current literature, there are no studies reporting adhesive properties of microorganisms to spider webs... (Complete abstract click electronic access below)

Microalgas na Produção de Biodiesel: Extração e Composição Lipídica

The uninterrupted rise in emission of greenhouse gases open way to the use of biofuels, due to politics that focus on fuel safe, clean and renewable. The use of microalgae for biodiesel production has been described as one of the most promising sources of biomass for biofuels. The aim of this study was to evaluate the extraction and lipid profile of the microalgae Dunaliella tertiolecta, Isochrysis galbana and Tetraselsim gracilis. The extractions were performed with solvents chloroform /methanol and petroleum ether. The lipid profile was analyzed by gas chromatography after transesterification.The petroleum ether showed more efficiency in the extraction, the best result obtained was in the microalgae D. tertiolecta with 19.52% of lipid. The lipid profile analysis indicated a biodiesel stable to oxidation and elevated viscosity

Avaliação toxicológica durante a biodegradação de óleos e biodiesel

Atividades relacionadas com a extração do petróleo, bem como as atividades derivadas envolvem grandes riscos, que podem ser ambientais ou à saúde humana. Podem ser de forma direta, como os derramamentos, ou indireta, como resíduos gerados pela sua utilização, poluindo ar, corpos d’água e solos. A biorremediação consiste na utilização de microrganismos tais como as bactérias, fungos filamentosos e leveduras para remediar um ambiente contaminado, transformando os compostos em algo pouco tóxico ou sem nenhuma toxicidade. A ciência que estuda os efeitos tóxicos nos organismos e no ambiente se chama toxicologia. Por isso existe uma íntima ligação entre essas duas ciências. O presente projeto tem como objetivo estudar a toxicidade de óleos lubrificantes automotivos (mineral novo, sintético novo e usado), óleos vegetais (novo e usado) e biodiesel durante sua biodegradação em ambiente terrestre. Análises descritivas e comparativas são as bases para o estudo e compreensão da biodegradação dos contaminantes aqui citados. Os testes toxicológicos darão uma idéia de biodegradação dos diferentes contaminantes no solo. Para os testes de toxicidade serão utilizadas sementes de Eruca sativa (rúcula), sementes de Lactuca sativa (alface) e Eisenia andrei (minhoca). Após 180 dias de biodegradação dos compostos pôde-se concluir que o óleo lubrificante sintético é o mais biodegradável e os demais contaminantes necessitam de tempo de biodegradação superior a 6 meses para que sua toxicidade fique baixa.

Influência do porta-enxerto, da configuração de extração e do período de maturação no teor de limonina e na aceitação sensorial do suco de laranja Pêra-Rio

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Simulação computacional da extração líquido-líquido fracionada de enzimas para produção de biodiesel

Liquid-liquid extraction is utilized for purification of biomolecules by Aqueous Biphasic Systems (ABS), since this process does not damage the biotechnological potential of these compounds. In this work, using the free software Scilab®, the fractionated liquid-liquid extraction was studied aiming a lipase (target enzyme) partition in a water + PEG + DEX system. Lisozime was considered as contaminant. As computer simulations has been extensively used when a first estimation of technical feasibility of process is desired, this work demonstred that the system is viable for recovery the 80 % till 90 % the target enzyme, but should be noted that the trial aimed only the fractionation of the enzyme target of a contaminant, not its concentration, which should be done by another process.

Fungos derivados da Antártica: biodiversidade e produção de enzimas lignocelulóticas a baixas e médias temperaturas

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Inserção e extração de marca d'água em imagens digitais usando a transformada wavelet

Pós-graduação em Engenharia Elétrica - FEIS

Identificação e caracterização de fungos melanizados com potencial de degradação de tolueno

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Desenvolvimento de sensores eletroquímicos e métodos de extração em fase sólida baseados em sistemas biomiméticos para análise de poluentes ambientais

Pós-graduação em Química - IQ

Micro-extração em fase sólida (SPME) in situ e comparação de compostos voláteis em variedades de manga (Mangifera indica L.) resistentes e suscetíveis à mosca-das-frutas Anastrepha obliqua (Macquart) (Diptera: Tephritidae)

Pós-graduação em Química - IQ

Estabilidade oclusal a longo prazo de Classe II, divisão 1, após tratamento com extração de pré-molares

Patients are looking for esthetic and functional changes when seeking orthodontic treatment and expect the remaining of a stable occlusion. Occlusion stability is one of the goals of the orthodontist; however, dental relationships changes in long-term can occur leading to a relapse of the treatment. Teeth and shape of arches tend to return to the original form, been the retention phase important after the appliance removal, even after several years of post-treatment. This article approaches a submission of a clinical case of Class II division 1 treated with extraction of premolars analyzing its long-term stability.

Extração seriada: considerações clínicas

The early malocclusion treatment has increased interest of orthodontic community. Among these is the serial extraction that harmonizes the differences between the amount of dental material and permanent deficiency of supporting bone. The technique is applied in mixed dentition through a predetermined sequence of extractions between deciduous and permanent teeth, in order to reach spontaneous immediately alignment of remaining permanent teeth with a minimum orthodontic mechanics. It will be reported a case where the serial extraction was performed in a growing patient with biprotrusion, Class I malocclusion and severe crowding. All functional and aesthetics goals were reached.

Extração de incisivo inferior: uma alternativa no tratamento da classe III

The correction of a Class III malocclusion in adult patients is one of the major challenges in orthodontics due to facial deformities occurring during the unfavorable growth of this kind of pattern, as well as the treatment options capable of producing facial changes aesthetically acceptable and adequate for today's beauty standards. One acceptable alternative treatment is the removal of a lower incisor. For a Class III correction through a lower incisor extraction a thorough analysis and planning must be carried out by taking into consideration the amount of overjet and overbite, periodontal condition of the teeth and the possibility of obtaining a good dental occlusion with acceptable facial aesthetics. Will be presented two case reports of patients presenting an anteroinferior crowding, Class III malocclusion condition. The treatment through a lower incisor extraction and the reasons why this treatment was adopted will be discussed.