香港地区湍蛙遗传多样性研究

依据线粒体上ND2和CO1两个变异较大的基因序列分析了香港地区香港湍蛙7种群、华南湍蛙1种群，以及大陆其他地区华南湍蛙7种群，戴云湍蛙1种群，武夷湍蛙1种群的系统发育关系，进而探讨香港湍蛙的遗传多样性、香港湍蛙特有性、如何确定香港湍蛙最佳保护单元以及这四种湍蛙的物种分类地位。 1． 香港湍蛙保护遗传学研究 香港湍蛙核苷酸传多样性较低，从其遗传多样性信息、单倍型网络分析、中性检验值以及岐点分布结果一致显示香港湍蛙很可能经历了瓶颈后的扩张，种群正在由一个较小的有效种群大小迅速增长, 有足够的时间通过变异用于积累单倍型的多态性, 而对于提高核苷酸多样化而言, 时间尚短（Nei M et al，1975，Avise J C，2000；李明等，2003）。 分子变异分析结果显示香港湍蛙种群间存在较多的基因交流，且系统发育树上各种群间交叉在一起，没有形成与地理单元相关的分支，而从其单倍型网络看，他们源于共同的祖先，是一个单系群，与地理单元间没有形成显著的遗传分化。因此应作为一个进化显著单元（ESU）。结合其与其他湍蛙发育关系及遗传距离以及野外采集信息认为香港湍蛙只在香港地区有分布，属于香港特有种。该物种内遗传多样性较低，又属于世界自然保护联盟红皮书中的近危种，同时也是《野生动物保护条例》中的受保护野生动物，且由于香港城市建设等使得其栖息环境受到威胁，因此在香港特别行政区应该受到重点保护。 从单倍型分布和核苷酸多样性可以看出大榄涌种群和城门种群具有较高的单倍型多样性和核苷酸多样性，应该作为保护的重点区域。 2. 华南湍蛙东、南沿海种群间系统关系 华南湍蛙分布广，各种群存在着丰富的遗传多样性信息且中部种群广西龙胜和湖南张家界种群核苷酸多样性明显高于其他边缘种群华南湍蛙。种群间几乎没有基因交流，且各种群间无共享单倍型，可见已形成了显著的遗传分化。各种群间遗传距离都较远，其中广东南昆山种群以及福建三港种群与其他种群距离最远，因此可以推测其他种群（广东深圳、香港大屿山、广西龙胜和防城以及湖南张家界种群）可能为独立进化的种群。但是否是一新种或一隐存种，还需要结合形态学进行更深入的研究。 本研究中无论从系统关系看还是从遗传距离看，大屿山种群与深圳种群最近，支持陈坚峰等将其定为华南湍蛙，即华南湍蛙新增一个分布点：香港大屿山。 系统树上广西防城种群（支B）与龙胜和湖南种群（支A）形成姐妹群。香港大屿山种群与深圳种群先形成姐妹群（支C），但却没有与其距离很近的广东南岭及南昆山种群（支D）形成姐妹群，可能粤北和粤中的环境及气候较复杂因此与粤南其他种群形成了明显的隔离。同时可以看出华南湍蛙种群遗传分化与地理距离没有显著的相关性。 3. 四种湍蛙间的系统关系 根据线粒体CO1基因建立四种湍蛙间的系统关系及其遗传距离，很清楚地看到，香港湍蛙与戴云湍蛙关系很近，而华南湍蛙则与武夷湍蛙较近。然而，戴云湍蛙同一个种群内部共有两个单倍型DY1和DY2，且两个单倍型间遗传距离大于DY1与香港湍蛙间遗传距离，更远远大于香港湍蛙种群内部的距离，即戴云湍蛙内部两个单倍型间遗传距离达到了种级水平，同样在系统发育树上这两个单倍型与香港湍蛙形成并系。但是，戴云湍蛙种内在形态上差异不显著。因此，其是否属于萌芽物种分化形成（budding speciation）或已经完全分化为两个不同的种值得进一步研究？ 与戴云湍蛙香港湍蛙关系类似，从系统树上看华南湍蛙不形成单系，而是分成两个大支，与武夷湍蛙形成并系，且福建和南昆山的华南湍蛙与武夷湍蛙遗传距离远大于武夷湍蛙种内福建种群与浙江种群的遗传距离，达到了种级分化水平。由此，可以推断武夷湍蛙是有效种。系统树上广东深圳、香港大屿山、广西防城和龙胜以及湖南张家界种群与华南湍蛙福建及南昆山各种群间遗传距离已超出了种内各种群间的遗传距离，但是至于这一支是否应为另外一个种，有必要扩大采样，并结合核基因及形态信息进行进一步研究。 MtDNA of ND2 and CO1 gene were used to investigate genetic diversity of Amolops in Hongkong .We collected seven populations of A. hongkongensis,，one population of A.ricketti from Hong Kong and other seven populations of A.ricketti from East and South of Chinese mainland. As well as one population of A. daiyunensis and one population of A.wuyiensis Phylogenetic relationship were analyzed of four species. Discussed whether A.hongkongensis is an endemic species and how can we make the conservation and management decisions. 1. Conservation Genetics of A. hongkongensis A. hongkongensis has a low nucleotide diversity, the results of genetic diversity, haplotype network, neutrality test and the mismatch distributions indicate that A. hongkongensis experienced a recent expansion after a bottle neck. They had enough time to accumulated haplotype diversity, but it’s too short to have a high nucleotide diversity（Nei M et al，1975，Avise J C，2000；Li et al，2003）. The result of AMOVA reveals that it has much gene exchange among the populations of A. hongkongensis. The clades of the phylogenetic tree were mixed together, no significant genetic differentiation among 8 populations and they share the same ancestor from the network analysis, these indicate that they are monophyly and should be protected as one ESU. Combined with the information of relationships of interspecies, genetic distance and distribution investigate, We conclude that A. hongkongensis is an endemic species of Hong Kong. Considering on the status of low genetic diversity in A.hongkongensis, and this species was listed in the IUCN red list as near threatened, as well as listed in the . Furthermore, it’s habitat loss and degradation more rapidly as the human activity got higher and higher. So it’s urgent to protect them in Hong Kong. Our results suggest that Tai Lam Wu and TAI MO Shan -Shing Mun populations have the higher priority to be protected because their higher genetic diversity. 2．Phylogenetic relationships among populations of Amolops ricketti from the Southern and eastern China A. ricketti has the considerable genetic diversity of mitochondrial haplotypes within and among populations, and Mitochondrial DNA diversity was higher in populations at the central area of the present distribution range of the frog，i. e. the Longsheng population and Zhangjiajie population, than at the edges of their distribution range. They have no share haplotype among populations, and have a significant genetic differentiation. Genetic distance is high among the populations, especially the distance of Nankun and Sangang group with others, which suggested that they evolved independently. May be there is a cryptic species or a new species, a further study is needed. The results of gene tree and the genetic distance clearly demonstrate that the population from LanTau island is A. ricketti, so we agree with Chen et al(2005) . That means A.ricketti have a new distribution site: LanTau island, HongKong. Phylogenetic relationships were analyzed through NJ and Mrbayes methods and got a consistent topological structure, the structure indicated that the ingroup were comprised four groups. Populations Longsheng and Zhangjiajie were first clustered as clade A; Populations Fangcheng was clustered together (clade B) as a sister group to clade A；Populations Shenzhen and Lantau island were sister groups and clustered as clade C；Then the clade D included populations Nankunshan and Nanling in Guangdong province and Sangang in Fujian province. 3. Phylogenetic Relationships among these four specises Phylogenetic relationships based on 1503bp CO1 gene and the genetic distance show that A. hongkongensis close to A. daiyunensis whereas A.ricketti near to A.wuyiensis. Nevertheless, there are two haplotypes in A.daiyunensis and the genetic distance between them higher than the distance between DY1 with A. hongkongensis. A. hongkongensis is nested in the paraphyletic ancestral species A. daiyunensis. Without significant difference in the morphological characters, So, we considered both A.daiyunensis and A.hongkongensis are valid species, may be this represents a case of ‘budding speciation’ like Batrachuperus pinchonii(Fu and Zeng,2008) in the population of A. daiyunensis. Just like two species above A. wuyiensis and A. ricketti are not monophyly, instead, A.wuyiensis is nested in the paraphyletic ancestral species A.ricketti. We need do more research to make sure whether they are new species.

Drift distance survey in direct plasma injection scheme for high current beam production

In a laser ion source, plasma drift distance is one of the most important design parameters. Ion current density and beam pulse width are defined by plasma drift distance between a laser target and beam extraction position. In direct plasma injection scheme, which uses a laser ion source and a radio frequency quadrupole linac, we can apply relatively higher electric field at beam extraction due to the unique shape of a positively biased electrode. However, when we aim at very high current acceleration such as several tens of milliamperes, we observed mismatched beam extraction conditions. We tested three different ion current at ion extraction region by changing plasma drift distance to study better extraction condition. In this experiment, C6+ beam was accelerated. We confirmed that matching condition can be improved by controlling plasma drift distance.

卫星遥感监测ET方法及其在水管理方面的应用

概述了利用遥感技术监测流域蒸发(ET)用于流域水管理的研究,利用卫星遥感监测ET比传统地面监测ET方法具有更高的经济合理性和实用性;通过遥感监测的ET,不仅可以对农业用水效率、灌溉系统性能作出更符合实际的评价,还可服务于流域水资源管理和区域水资源利用规划。随着信息技术的快速发展,卫星遥感监测ET的方法在水管理方面的应用前景广阔,我国应加强对该技术的研究和应用。

Identification of herb Acanthopanax senticosus (Rupr. Et Maxim.) harms by capillary electrophoresis with electrochemical detection

In this paper, a rapid, high efficient, sensitive and inexpensive approach based on a combination of simple ultrasonic extract and capillary electrophoresis (CE) separation with electrochemical detection (ED), is described to identify herbs by comparing their CE-ED profiles (namely, CE-ED electropherograms). The proposed method takes advantage of ultrasmall sample volume, low consumption of organic solvent, simple sample pretreatment and easy cleanup procedure. It was applied to analyze the CE-ED profiles of stems of herb Acanthopanax senticosus (Rupr. Et Maxim.) Harms from different sources and different parts (roots, rhizomes, stems and leaves) of this herb. By comparing peak number, peak height and peak height ratio, we found that the CE-ED profiles showed big differences for the herbs from the different sources and the different parts of this herb. In addition, the distribution of bioactive compounds (isofraxidin, rutin and chlorogenic acid) in the different parts of this herb and their content variations affected by the source were studied with the CE-ED method. Based on their own unique CE-ED profiles, these herbs from the different sources and the different parts of this herb could be easily distinguished. Therefore, the proposed approach could be used as a rapid, high efficient and sensitive method for the identification of herbal medicines.

Investigation of the effect of branched structure on the performances of the copolymers synthesized from ethylene and alpha-olefin with rac-Et(Ind)(2)ZrCl2/MMAO catalyst system

The branched copolymers prepared from ethylene and alpha-olefins using rac-Et(Ind)(2)ZrCl2/MMAO catalyst system were studied. Both the absolute molecular weight ((M) over bar (W)) and the molecular size (radius of glyration, R-g) of the polymers eluting from gel permeation chromatography (GPC) columns were obtained simultaneously via a high temperature GPC coupled with a two-angle laser light scattering (TALLS) detector. The branched structures and performances of the copolymers display approximate molecular weight and molecular sizes were investigated. Wide angle X-ray diffraction analyses indicate that 16-carbon side branch could co-crystallize effectively with backbone chain at low alpha-olefin incorporation. The melt behaviors of the copolymers were studied by dynamic rheological measurements. Both branch length and comonomer content affect considerably the loss modulus, storage modulus and complex viscosity of the copolymers. The relationship between the dynamic-mechanical behavior and the comonomer content of the copolymers was also examined by dynamic-mechanical experiments.

Relationship between the continually expanded interlayer distance of layered silicates and excess intercalation of cationic surfactants

Excess intercalation of cationic surfactants into Na-montmorillonites (MMTs) was investigated in organically modified silicates (OMSs), synthesized with MMTs and octadecylammonium chloride (OAC) by systematically varying the surfactant loading level from 0.625 to 1, 1.25, 1.56, 2, and 2.5 with respect to the cation exchange capacity (CEC) of MMTs. Wide-angle X-ray diffraction and thermogravimetric analysis results indicated that the continuous increase of interlayer distances came from the entering of surfactants into the interlayer of MMTs. Excess surfactants were extracted with a Soxhlet apparatus, which showed two kinds of intercalation states of surfactants in the interlayer when the surfactant loading level was beyond the CEC. Fourier transform infrared spectroscopy and differential scanning calorimetry were used to explore the microstructures of OMSs. It was found that the surfactants arranged more orderly as the loading level increased and the excess surfactants piled up in the interlayer together with counterions, forming a sandwiched surfactant layer. On the basis of the results, the layer structures of OMSs and the mechanism by which the surfactants entered the interlayer were expounded: surfactant cations entered the interlayer through cation exchange reactions and were tightly attracted to the silicate platelet surfaces when the surfactant loading level was below the CEC;

Brittle-tough transition in PP/EPDM blends: effects of interparticle distance and tensile deformation speed

The toughness of polypropylene (PP)/ethylene-propylene-diene monomer rubber (EPDM) blends containing various EPDM contents as a function of the tensile speed was studied. The toughness of the blends was determined from the tensile fracture energy of the side-edge notched samples. A sharp brittle-tough transition was observed in the fracture energy versus interparticle distance (ID) curves when the crosshead speed < 102.4 mm/min. It was observed that the brittle-ductile transition of PP/EPDM blend occurred either by reducing ID or by decreasing the tensile speed. The correlation between the critical interparticle distance and tensile deformation rate was compared with that between the critical interparticle distance and temperature for PP/EPDM blends. (C) 2000 Elsevier Science Ltd. All rights reserved.

Brittle-ductile transition in high-density polyethylene/glass-bead blends: Effects of interparticle distance and temperature

The toughness of high-density polyethylene (HDPE)/glass-bead blends containing various glass-bead contents as a function of temperature was studied. The toughness of the blends was determined from the notch Izod impact test. A sharp brittle-ductile transition was observed in impact strength-interparticle distance (ID) curves at various temperatures. The brittle-ductile transition of HDPE/glass-bead blends occurred either with reduced ID or with increased temperature. The results indicated that the brittle-ductile-transition temperature dropped markedly with increasing glass-bead content. Moreover, the correlation between the critical interparticle distance (ID.) and temperature was obtained. Similar to the ID, of polymer blends with elastomers, the ID, nonlinearly increased with increasing temperature. However, this was the first observation of the variation of the ID, with temperature for polymer blends with rigid particles. (C) 2001 John Wiley & Sons, Inc. J Polym. Sci Part B: Polym. Phys 39: 1855-1859, 2001.

Atom space distance and computing of molecular similarity

A mathematical model on computation of molecular similarity was suggested, The algorithmic techniques for measuring the degree of similarity between pairs of three-dimensional chemical molecules was represented by modified interatomic distance matrices. Current work was carried out on Indigo 2 work station with Sybyl software. Four groups of molecules were used to compute the molecules similarity to testing the mathematical model with satisfactory results.

Effect of polymer chain structure and chain distance on luminescent efficiency

Three kinds of PPV-based copolymers were synthesized and characterized. Their luminescent properties were investigated and discussed by PL spectrum, and time-dependence luminescent spectrum in film and solution stare. The results show that in the range of our study, the PL intensity and lifetime of luminescent decay increase with the increasing length of flexible segments and the solution diluting, indicating the tendency of the increase of luminescent efficiency.

Interparticle distance-temperature-strain rate equivalence for the brittle-tough transition in polymer blends

From the angle of energy transformation an equation was obtained for the brittle transition in polymer blends. The effects of interparticle distance, temperature and strain rate on the brittle-tough transition in polymer blends were characterized by this equation. The calculations show that, for this transition: (1) increasing temperature and decreasing interparticle distance are equivalent and the shift factor increases with increasing temperature; (2) decreasing strain rate and decreasing interparticle distance have equivalent effects on the transition; (3) the strain rate must be optimum in order to find the brittle-tough transition phenomena for a given temperature region. (C) 1998 Published by Elsevier Science Ltd. All rights reserved.