Physical-chemical analysis of the cerebrospinal fluid of healthy dogs submitted to different storage periods and temperatures

Disfunções envolvendo o sistema nervoso são de grande importância na Medicina Veterinária, pois tratam-se de enfermidades de elevada incidência e com poucos subsídios auxiliares no seu diagnóstico, prognóstico e na avaliação de terapias empregadas. Ainda hoje, o diagnóstico baseia-se, em grande parte, no histórico e no exame clínico neurológico. Dessa forma, a análise dos constituintes do fluido cefalorraquidiano torna-se uma das poucas alternativas de acesso clínico ao sistema nervoso central (SNC). Mesmo com a grande utilidade do exame físico-químico e citoscópico do liquor na neurologia veterinária, poucos são os estudos sobre a estabilidade dos seus constituintes sob estocagem. Dessa forma, o presente trabalho teve como finalidade verificar a influência da temperatura e do tempo de conservação nas características físico-químicas do liquor de cães hígidos. Para tanto, foram coletadas amostras de LCR, através da punção da cisterna cerebelo-medular de cães clinicamente sadios, as quais foram submetidas à análise da densidade específica, do pH, da glicorraquia, das proteínas totais e das atividades das enzimas creatina quinase (CK) e aspartato aminotransferase (AST), após conservá-las em diferentes temperaturas (25°C, 4°C e -4°C) e por diferentes períodos de tempo (logo após a colheita, 24 horas, 48 horas, uma semana e um mês). Dentre os resultados obtidos, foi possível verificar, principalmente, que houve estabilidade dos parâmetros estudados por até um mês de estocagem nas amostras mantidas sob a temperaturas de congelamento de -4°C.

Peritoneal fluid changes in horses subjected to small colon distension

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Serum magnesium levels in healthy dogs submitted to the administration of cisplatin with fluid therapy

Cisplatin is an antineoplastic drug that is used to treat carcinomas and osteosarcomas in dogs. However, it can cause kidney damage which in turn leads to the loss of electrolytes. Concentration of magnesium was evaluated in the blood serum of eight dogs that had undergone therapy with cisplatin. The dogs were divided into two groups. Group 1 was supply with cisplatin (70 mg/m(2), iv) and to prevent nephrotoxcity, saline solution at 0.9% was administered (25 ml/kg/hour, iv in three hours). The animals in Group 2 were not supplied with cisplatin. There was no significant difference (P < 0.05) between the two groups and the results obtained indicated that the protocol used for Group 1 did not cause changes in the serum concentrations of magnesium. Therefore, it can be concluded that the administration of cisplatin does not cause variations if it is combined with the fluid therapy.

Effect of Vitrification of Feline Ovarian Cortex on Follicular and Oocyte Quality and Competence

Cryopreservation of ovarian cortex has important implications in the preservation of fertility and biodiversity in animal species. Slow freezing of cat ovarian tissue resulted in the preservation of follicular morphology and in the follicular development after xenografting. Vitrification has been recently applied to ovarian tissues of different species, but no information is available on the effect of this method on feline ovarian cortex. Moreover, meiotic competence of fully grown oocytes isolated from cryopreserved tissue has not been reported. The aim of this study was to evaluate the effect of vitrification of feline ovarian cortex on follicular morphology and oocyte integrity, as well as meiotic competence. A total of 352 fragments (1.52 mm3) were obtained from ovarian cortical tissues: 176 were vitrified and 176 were used fresh as control. Histological evaluation of fresh and vitrified fragments showed intact follicles after cryopreservation procedures with no statistically significant destructive effect from primordial to antral follicles. After IVM, oocytes collected from vitrified ovarian fragment showed a higher proportion of gametes arrested at germinal vesicle (GV) stage compared to those isolated from fresh control tissue (33.8% vs 2.9%; p < 0.001). However, oocytes isolated from vitrified tissues were able to resume meiosis, albeit at lower rate than those collected from fresh tissues (39.8% vs 85.9%; p < 0.00001). Vitrification induced changes in the organization of cytoskeletal elements (actin microfilaments and microtubules) of oocytes, but significantly only for actin network (p < 0.001). Finally, chromatin configuration within the GV was not affected by the cryopreservation procedure. Our study demonstrated that vitrification preserves the integrity of ovarian follicles and that oocytes retrieved from cryopreserved tissue maintain the capability of resuming meiosis. To our knowledge, this has not previously been reported in the cat.

Growth and antimicrobial activity of lactic acid bacteria from rumen fluid according to energy or nitrogen source

Objetivou-se avaliar os efeitos da suplementação com diferentes fontes de energia e de compostos nitrogenados sobre o crescimento e produção de bacteriocinas de bactérias ácido-láticas in vitro. As incubações foram conduzidas utilizando-se fluido ruminal originado de um novilho Holandês-Zebu fistulado no rúmen. O animal foi mantido em pastagem de Brachiaria decumbens recebendo 200 g/dia de proteína bruta suplementar. Os substratos e o inóculo foram acondicionados em frascos de vidro considerando-se oito tratamentos: celulose, celulose e caseína, celulose e peptona de soja, celulose e ureia, amido, amido e caseína, amido e peptona de soja e amido e ureia. Incubações sucessivas foram conduzidas para seleção dos microrganismos em função das fontes energéticas e de compostos nitrogenados. O amido favoreceu o crescimento de bactérias ácido-láticas em comparação à celulose. A suplementação com proteína verdadeira (peptona de soja e caseína) estimulou o crescimento dessas bactérias em comparação ao controle (sem suplementação com compostos nitrogenados). A adição de ureia não estimulou o crescimento de bactérias ácido-láticas. Nenhuma atividade antimicrobiana foi detectada a partir das colônias de bactérias ácido-láticas isoladas. Fontes de proteína verdadeira incrementam a competição entre bactérias fermentadoras de carboidratos estruturais e não-estruturais.

Effect of recombinant bovine somatotropin (bST) on follicular population and on in vitro buffalo embryo production

The objective of this study was to evaluate the effect of bovine somatotropin (bST) on ovarian follicular population in buffalo heifers and its influence on oocyte quality, recovery rates and in vitro embryo production. We tested the hypothesis that bST treatment in buffalo females submitted to an ovum pick-up (OPU) program Would improve the number of follicles recruited, oocyte quality and in vitro embryo production. A total of 10 heifers were assigned into two treatment groups: group bST (n = 5; receiving 500 mg of bST in regular intervals) and control group (n = 5; without additional treatment). Both groups were subjected to OPU sessions twice a week (every 3 or 4 days), for a total of 10 sessions per female, although due to procedural problems, only the first five OPU sessions produced embryos. The number of follicles and the diameters were recorded at all OPU sessions. The harvested oocytes were counted and classified according to their quality as either A, B, C, D or E, with A and B considered good quality. Cleavage and blastocyst production rates were evaluated 2 and 7 days after in vitro fertilization, respectively. The bST treatment increased the total number of antral follicles (> 3 mm in diameter; 12.2 compared with 8.7: p, < 0.05) and of small antral follicles (< 5 mm; 9.1 compared with 6.5; p < 0.05) per OPU session. The bST also tended to increase the number of oocytes recovered per session (5.2 compared with 4.1; p = 0.07), and enhanced the percentage of good quality oocytes (48.8% compared with 40.6%; p = 0.07), bST showed no effect on cleavage and blastocyst production rates (p > 0.05). The significant effects of performing repeated OPU sessions were decreasing the follicular population (p < 0.001) as well as the number of follicles aspirated (p < 0.001), and oocytes recovered (p < 0.02). In conclusion, bST treatment improves the follicular population, demonstrating its possible application in buffalo donors submitted to OPU programs. (c) 2008 Elsevier B.V. All rights reserved.

Supercritical fluid extraction from Lippia alba: global yields, kinetic data, and extract chemical composition

In this work, experimental data for the system Lippia alba + CO2 is presented. The major constituents of the L. alba volatile oil are limonene and carvone. Thus, literature data for the systems limonene + CO2 and carvone + CO2, and the Peng-Robinson equation of state (PR-EOS) were used to select the operating temperature and pressure, which maximize the global yield in L. alba extract. Global yields were determined at 80, 100, and 120 bar and 40, 45, and 50 degrees C. L. alba extracts were also obtained by conventional processes (hydrodistillation, low-pressure ethanol extraction and Soxhlet ethanol). The chemical compositions of the extracts were determined by gas and thin layer chromatography (TLC). The secretor structures of L. alba were observed by scanning electron microscopy (SEM) before and after supercritical extraction. The largest yield (similar to 7%, mass of extract/mass of dry solid) of the CO2-extract was obtained at 318 K and 100 bar. The chemical compositions of the CO2-extracts were different from those of the extracts obtained by Soxhlet and low-pressure solvent extraction (LPSE) because of the co-extraction of heavy substances by ethanol. The operating conditions that maximized the carvone and limomene yields were 80 bar and 323 K (80 mass%) and 120 bar and 323 K (17 mass%), respectively. (c) 2004 Elsevier B.V All rights reserved.

OVARIAN HISTOLOGY and FOLLICULAR SCORE IN FEMALE RATS TREATED WITH NANDROLONE DECANOATE and SUBMITTED TO PHYSICAL EFFORT

The study was conducted to analyze the histology of the ovaries of adults rats treated with steroids, and submitted or not to physical effort. The control group consisted of females submitted to physical effort and sedentary females, both of which received a physiological solution of 0.9% saline. Treated females, sedentary or not, received 6 mg/kg of body weight of nandrolone decanoate. The steroid and physiological solution were administered intraperitoneally, with a single injection per week for 4 consecutive weeks. The applied physical effort was swimming (20 minutes daily, 5 days/week, for the 4 weeks of treatment). Serial sections (5 mu m) of ovaries were prepared for histological evaluation and follicular score. The weight of ovaries and hypophysis, the number of antral and atretic follicles, and the area of corpus luteum were all affected by the steroids. In the ovaries of the control groups, well-developed corpus luteum was observed. In the treated groups, the cortical stroma was occupied by ovarian interstitial tissue. The females treated with steroids presented estral acyclicity. The use of nandrolone decanoate, whether associated with physical effort or not, affected the morphological pattern of the ovaries.

High concentrations of the melatonin metabolite, N-1-acetyl-N (2)-formyl-5-methoxykynuramine, in cerebrospinal fluid of patients with meningitis: a possible immunomodulatory mechanism

We evaluated the presence of the melatonin metabolite N-1-acetyl-N-2-formyl-5-methoxykynuramine (AFMK), in cerebrospinal fluid (CSF) of patients with viral meningitis (n = 20) and control samples (n = 8) and correlate AFMK levels with inflammatory markers such as cellularity, protein, tumor necrosis factor (TNF)-alpha, interleukin (IL)-8 and IL-1 beta levels. A portion of the CSF was extracted with dichloromethane (1:5) and analyzed by high-performance liquid chromatography (HPLC) under standardized conditions for AFMK. AFMK was detected in 16 of 20 CSF samples of patients with viral meningitis; the concentration of AFMK was found to be above the quantification limit (50 nmol/L) in six of these samples. AFMK was not detected in any of the eight control samples. The samples were classified into groups according to AFMK levels: undetectable (< 10 nmol/L, group I), detectable but below the quantification limit (< 50 nmol/L, group II), and quantified (> 50 nmol/L, group III). Group II presented the highest levels of proteins and IL-8, whereas group III showed the lowest levels of the inflammatory parameters. This study supports our hypothesis that inflammation favors the formation of AFMK and that this compound has immunomodulatory activity in vivo.

Supercritical fluid extraction for pesticide multiresidue analysis in honey: determination by gas chromatography with electron-capture and mass spectrometry detection

An analytical procedure using supercritical fluid extraction (SFE) and capillary gas chromatography with electron-capture detection was developed to determine simultaneously residues of different pesticides (organochlorine, organophosphorus, organonitrogen and pyrethroid) in honey samples. Fortification experiments were conducted to test conventional extraction (liquid-liquid) and optimize the extraction procedure in SFE by varying the CO2-modifier, temperature, extraction time and pressure. Best efficiency was achieved at 400 bar using acetonitrile as modifier at 90 degreesC. For the clean-up step, Florisil cartridges were used for both methods LLE and SFE. Recoveries for majority of pesticides from fortified samples of honey at fortification level of 0.01-0.10 mg/kg ranged 75-94% from both methods. Limits of detection found were less than 0.01 mg/kg for ECD and confirmation of pesticide identity was performed by gas chromatography-mass spectrometry in selected-ion monitoring mode. The multiresidue methods in real honey samples were applied and the results of developed methods were compared. (C) 2004 Elsevier B.V. All rights reserved.

Multiresidue analysis of pesticides in soil by supercritical fluid extraction/gas chromatography with electron-capture detection and confirmation by gas chromatography-mass spectrometry

The applicability of supercritical fluid extraction (SFE) in pesticide multiresidue analysis (organohalogen, organonitrogen, organophosphorus, and pyrethroid) in soil samples was investigated. Fortification experiments were conducted to test the conventional extraction (solid-liquid) and to optimize the extraction procedure in SFE by varying the CO2 Modifier, temperature, extraction time, and pressure. The best efficiency was achieved at 400 bar using methanol as modifier at 60 degreesC. For the SFE method, C-18 cartridges were used for the cleanup. The analytical screening was performed by gas chromatography equipped with electron-capture detection (ECD). Recoveries for the majority of pesticides from spiked samples of soil at different residence times were 1, 20, and 40 days at the fortification level of 0.04-0.10 mg/kg ranging from 70 to 97% for both methods. The detection limits found were <0.01 mg/kg for ECD, and the confirmation of pesticide identity was performed by gas chromatography-mass spectrometry in a selected-ion monitoring mode. Multiresidue methods were applied in real soil samples, and the results of the methods developed were compared.

A continuously differentiable upwinding scheme for the simulation of fluid flow problems

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Analysis of the different forms of application and types of cutting fluid used in plunge cylindrical grinding using conventional and superabrasive CBN grinding wheels

The work reported here involved an investigation into the grinding process, one of the last finishing processes carried out on a production line. Although several input parameters are involved in this process, attention today focuses strongly on the form and amount of cutting fluid employed, since these substances may be seriously pernicious to human health and to the environment, and involve high purchasing and maintenance costs when utilized and stored incorrectly. The type and amount of cutting fluid used directly affect some of the main output variables of the grinding process which are analyzed here, such as tangential cutting force, specific grinding energy, acoustic emission, diametrical wear, roughness, residual stress and scanning electron microscopy. To analyze the influence of these variables, an optimised fluid application methodology was developed (involving rounded 5, 4 and 3 turn diameter nozzles and high fluid application pressures) to reduce the amount of fluid used in the grinding process and improve its performance in comparison with the conventional fluid application method (of diffuser nozzles and lower fluid application pressure). To this end, two types of cutting fluid (a 5% synthetic emulsion and neat oil) and two abrasive tools (an aluminium oxide and a superabrasive CBN grinding wheel) were used. The results revealed that, in every situation, the optimised application of cutting fluid significantly improved the efficiency of the process, particularly the combined use of neat oil and CBN grinding wheel. (c) 2005 Elsevier Ltd. All rights reserved.

A sustainable alternative for cooling the machining processes using a refrigerant fluid in recirculation inside the toolholder

This article presents a cooling system for cutting tool in turning based in a toolholder with cooling fluid flowing inside its body being that this fluid must necessarily be able to phase change due to heat generated from machining processes. In this way, the fluid evaporates just under the cutting tool allowing a heat transfer more efficient than if were used a fluid without phase change once the latent heat of evaporation is beneficial for removal heat. Following, the cooling fluid evaporated passes through a condenser located out of the toolholder where it is condensated and returns to the toolholder again and a new cycle is started. In this study, the R-123, a hydrochlorofluorocarbon (HCFC) fluid, was selected for the turning of a Cr-Ni-Nb-Mn-N austenitic steel of hard machinability. The machining tests were carried out under three different machining conditions: dry machining, external cutting fluid (conventional method), and with the toolholder proposed. As result, the developed system allows a surface roughness up to 10% better than dry machining and a tool life close to the conventional method, but 32% superior to dry machining; moreover, there are environmental and economics advantages once the cooling fluid is maintained in a loop circuit.