Phase behavior, crystallization, and hierarchical nanostructures in self-organized thermoset blends of epoxy resin and amphiphilic poly(ethylene oxide)-block-poly(propylene oxide)-block-poly(ethylene oxide) triblock copolymers

Nanostructured thermoset blends of bisphenol A-type epoxy resin (ER) and amphiphilic poly(ethylene oxide)-block-poly(propylene oxide)-block-poly(ethylene oxide) (PEO-PPO-PEO) triblock copolymers were successfully prepared. Two samples of PEO-PPO-PEO triblock copolymer with different ethylene oxide (EO) contents, denoted as EO30 with 30 wt % EO content and EO80 with 80 wt % EO content, were used to form the self-organized thermoset blends of varying compositions using 4,4'-methylenedianiline (MDA) as curing agent. The phase behavior, crystallization, and morphology were investigated by differential scanning calorimetry (DSC), transmission electron microscopy (TEM), atomic force microscopy (AFM), and small-angle X-ray scattering (SAXS). It was found that macroscopic phase separation took place in the MDA-cured ER/EO30 blends containing 60-80 wt % EO30 triblock copolymer. The MDA-cured ER/EO30 blends with EO30 content up to 50 wt % do not show macroscopic phase separation but exhibit nanostructures on the order of 10-30 nm as revealed by both the TEM and SAXS studies. The AFM study further shows that the ER/EO30 blend at some composition displays structural inhomogeneity at two different nanoscales and is hierarchically nanostructured. The spherical PPO domains with an average size of about 10 nm are uniformly dispersed in the 80/20 ER/EO30 blend; meanwhile, a structural inhomogeneity on the order of 50-200 nm is observed. The ER/EO80 blends are not macroscopically phase-separated over the entire composition range because of the much higher PEO content of the EO80 triblock copolymer. However, the ER/EO80 blends show composition-dependent nanostructures on the order of 10-100 nm. The 80/20 ER/EO80 blend displays hierarchical structures at two different nanoscales, i.e., a bicontinuous microphase structure on the order of about 100 nm and spherical domains of 10-20 nm in diameter uniformly dispersed in both the continuous microphases. The blends with 60 wt % and higher EO80 content are completely volume-filled with spherulites. Bundles of PEO lamellae with spacing of 20-30 nm interwoven with a microphase structure on the order of about 100 nm are revealed by AFM study for the 30/70 ER/EO80 blend.

Nanostructures, semicrystalline morphology, and nanoscale confinement effect on the crystallization kinetics in self-organized block copolymer/thermoset blends

This work reports the first instance of self-organized thermoset blends containing diblock copolymers with a crystallizable thermoset-immiscible block. Nanostructured thermoset blends of bisphenol A-type epoxy resin (ER) and a low-molecular-weight (Mn = 1400) amphiphilic polyethylene-block-poly(ethylene oxide) (EEO) symmetric diblock copolymer were prepared using 4,4'-methylenedianiline (MDA) as curing agent and were characterized by transmission electron microscopy (TEM), atomic force microscopy (AFM), small-angle X-ray scattering (SAXS), and differential scanning calorimetry (DSC). All the MDA-cured ER/EEO blends do not show macroscopic phase separation but exhibit microstructures. The ER selectively mixes with the epoxy-miscible PEO block in the EEO diblock copolymer whereas the crystallizable PE blocks that are immiscible with ER form separate microdomains at nanoscales in the blends. The PE crystals with size on nanoscales are formed and restricted within the individual spherical micelles in the nanostructured ER/EEO blends with EEO content up to 30 wt %. The spherical micelles are highly aggregated in the blends containing 40 and 50 wt % EEO. The PE dentritic crystallites exist in the blend containing 50 wt % EEO whereas the blends with even higher EEO content are completely volume-filled with PE spherulites. The semicrystalline microphase-separated lamellae in the symmetric EEO diblock copolymer are swollen in the blend with decreasing EEO content, followed by a structural transition to aggregated spherical micellar phase morphology and, eventually, spherical micellar phase morphology at the lowest EEO contents. Three morphological regimes are identified, corresponding precisely to the three regimes of crystallization kinetics of the PE blocks. The nanoscale confinement effect on the crystallization kinetics in nanostructured thermoset blends is revealed for the first time. This new phenomenon is explained on the basis of homogeneous nucleation controlled crystallization within nanoscale confined environments in the block copolymer/thermoset blends.

A new approach for reducing blocking artefacts using linear filter for block based transform coded images

This paper presents a new approach to filtering the reconstructed image of block based transform coded images.

Performance of statistical inference for block classification in reducing blocking artefact in video coded images

This paper presents a performance study of four statistical test algorithms used to identify smooth image blocks in order to filter the reconstructed image of a video coded image. The four algorithms considered are the Coefficient of Variation (CV), Exponential Entropy of Pal and Pal (E), Shannon's (Logarithmic) Entropy (H), and Quadratic Entropy (Q). These statistical algorithms are employed to distinguish between smooth and textured blocks in a reconstructed image. The linear filtering is carried out on the smooth blocks of the image to reduce the blocking artefact. The rationale behind applying the filter on the smooth blocks only is that the blocking artefact is visually more prominent in the smooth region of an image rather than in the textured region.

Colonial designs: Thomas Karsten and the planning of urban Indonesia

Thomas Karsten (1885 – 1945) is undoubtedly a major figure in the history of architecture and town planning in Indonesia. Between 1915 and 1941 he was involved in town planning in 12 of the 19 municipalities and towns in Java (the most prominent exception being Surabaya) 3 of the 9 towns in Sumatra, and the only town in Borneo This paper does not attempts to investigate or question his importance in this field but to place his architectural and town planning ideas in the context of his broader politico-cultural ideas and activities in the Dutch East Indies between 1914 and 1942, and these, in turn, in the context of an evolving colonialism and colonial discourse.

Research designs and scientific identity in marketing journals: review and evaluation

Purpose - This research is based upon the assumption that the empirical research designs and the scientific identity of a journal are related. The objective is to review and evaluate the empirical research design of papers to determine the scientific identity of a selection of academic marketing journals. Design/methodology/approach – The journal sample consists of the Australasian Marketing Journal (AMJ), the European Journal of Marketing (EJM) and the Journal of Marketing (JM). The review and evaluation considers a six-year period, namely 2000-2005. The content analysis consisted of 811 papers. Findings – The scientific identity of JM may be seen as built upon quantitative research designs and the North American paradigm of research values. The scientific identity of AMJ is based upon a mix of empirical research designs and the Australian paradigm of research values. The scientific identity of EJM is also based upon a mix of empirical research designs, but a multi-continental paradigm of research values. Research limitations/implications – The leading continental journals in marketing maintain a scientific identity based upon the continental paradigm of research values. If it is driven to the extremes, a paradigmatic myopia and inertia of research designs may evolve that limit the scientific identity to be dogmatic and narrow-focused rather than variable and broad-focused. Originality/value – A cross-continental eview and evaluation of research designs and scientific identity of academic marketing journals is presented.

Synthesis and fractionated crystallization of organic-inorganic hybrid composite materials from an amphiphilic polyethylene-block-poly (ethylene oxide) diblock copolymer

Mesostructurally ordered inorganic–organic hybrid composite materials were successfully synthesized by utilizing a low-molecular-weight amphiphilic polyethylene-block-poly(ethylene oxide) (PE–PEO) diblock copolymer as the directing agent. The hybrid composites were formed via the sol–gel reaction of inorganic precursor tetraethoxysilane (TEOS) in an acidic ethanol/water solution with various amounts of PE–PEO. In these composite materials, the hydrophobic PE block of the PE–PEO copolymer forms separate microphase on the nanoscales within the rigid matrix of silica network. The crystallization of the PE block is strictly restricted within the microphase by the rigid silica matrix and takes place through homogeneous nucleation under the nanoscale confinement environment.

The impact of cell formation on layout designs in cellular manufacturing

This paper provides a procedure to address all three phases of the design for cellular manufacturing namely parts/machines grouping, intra-cell and inter-cell layout designs concurrently. It provides a platform to investigate the impact of the cell formation method on intracell and inter-cell layout designs and vice versa by generating multiple efficient layout designs for different cell partitioning strategies. This approach enables the decision maker to have wider choices with regard to the different number of cells and to assess various criteria such as travelling cost, duplication of machines, space requirement against each alternative. The performance of the model is demonstrated by applying it to an example selected from literature.

A Wuchiapingian (Late Permian) brachiopod fauna from an exotic block in the Indus–Tsangpo suture zone, southern Tibet, and its palaeobiogeographical and tectonic implications

A brachiopod fauna including 19 species of 17 genera from an exotic block in the Indus–Tsangpo suture zone in southern Tibet is described and illustrated. The brachiopod fauna is dominated by Martinia elegans and two new taxa: Jinomarginifera lhazeensis gen. et sp. nov. and Zhejiangospirifer giganteus sp. nov. The fauna is closely comparable with those from the middle and upper parts of the Wargal Formation and the Chhidru Formation in the Salt Range of Pakistan, the Chitichun Limestone in southern Tibet, and the Basleo area of West Timor, and these correlations suggest a Wuchiapingian age. The fauna exhibits substantial links with both peri–Gondwanan and Cathaysian faunas, which may imply that it is a seamount biota originally located in the southern margin of the Neotethys during the Late Permian, and was later (in the early Cenozoic) displaced and became sandwiched into younger marine deposits in the collision process between India and Eurasia.

A biogeographically mixed late Guadalupian (late Middle Permian) brachiopod fauna from an exotic limestone block at Xiukang in Lhaze county, Tibet

A total of 17 brachiopod species belonging to 15 genera are recorded from a limestone block of about 3×4 km2 in the Indus–Tsangbo suture zone at Xiukang in Lhaze County of Tibet. The brachiopod fauna generally indicates a Late Guadalupian age (late Wordian–Capitanian, late Middle Permian) based on its association with the Timorites-bearing ammonoid fauna and the presence of the brachiopod Urushtenoidea crenulata. Palaeobiogeographically, the fauna exhibits transitional/mixed characters between the warm-water Cathaysian and cold to temperate Gondwanan faunas and may have developed on a carbonate build-up or seamount on the oceanic crust.