‘Ladd traps’ as a visual trap for male and female Queensland fruit fly, Bactrocera tryoni (Diptera: Tephritidae)

Bactrocera tryoni (Froggatt) is Australia's major horticultural insect pest, yet monitoring females remains logistically difficult. We trialled the ‘Ladd trap’ as a potential female surveillance or monitoring tool. This trap design is used to trap and monitor fruit flies in countries other (e.g. USA) than Australia. The Ladd trap consists of a flat yellow panel (a traditional ‘sticky trap’), with a three dimensional red sphere (= a fruit mimic) attached in the middle. We confirmed, in field-cage trials, that the combination of yellow panel and red sphere was more attractive to B. tryoni than the two components in isolation. In a second set of field-cage trials, we showed that it was the red-yellow contrast, rather than the three dimensional effect, which was responsible for the trap's effectiveness, with B. tryoni equally attracted to a Ladd trap as to a two-dimensional yellow panel with a circular red centre. The sex ratio of catches was approximately even in the field-cage trials. In field trials, we tested the traditional red-sphere Ladd trap against traps for which the sphere was painted blue, black or yellow. The colour of sphere did not significantly influence trap efficiency in these trials, despite the fact the yellow-panel/yellow-sphere presented no colour contrast to the flies. In 6 weeks of field trials, over 1500 flies were caught, almost exactly two-thirds of them being females. Overall, flies were more likely to be caught on the yellow panel than the sphere; but, for the commercial Ladd trap, proportionally more females were caught on the red sphere versus the yellow panel than would be predicted based on relative surface area of each component, a result also seen the field-cage trial. We determined that no modification of the trap was more effective than the commercially available Ladd trap and so consider that product suitable for more extensive field testing as a B. tryoni research and monitoring tool.

Fishing effort and fish yield over a 15 year period on Lake Victoria, Uganda: management implications

The National Fisheries Resources Research Institute (NaFIRRI), the Directorate of Fisheries Resources (DiFR), the Local Government fisheries staff and those from the Beach Management Units (BMUs) of the riparian districts to Lake Victoria regularly and jointly conduct Frame and Catch Assessment Surveys. The information obtained is used to guide fisheries management and development. We reveal the trends in the commercial fish catch landings and fishing effort on the Uganda side of Lake Victoria, over a 15 year period (2000-2015) and provide the underlying factors to the observed changes. The contribution of the high value large size species (Nile perch and Tilapia) to the commercial catch of Lake Victoria has significantly reduced while that of the low value small size species, Mukene has increased over a ten year (2005-2015)period. The information is intended to update and sensitize the key stakeholders on the status of the Lake Victoria fisheries. In addition, the information provided is expected to guide policy formulation and management planning by the fisheries managers at all levels including the BMUs and Landing Site Management Committees (LSMCs), the Local government fisheries staff and the Directorate of Fisheries Resources. The information is anticipated to create awareness among the lakeside fisher communities to reverse the current trend in fish declines.

Mushroom growing as a livelihood option to fishing among Lake Edward fisher communities

Fisheries activities are the main source of livelihood for the communities that live at Lake Edward fish landing sites. The landing sites include: Kazinga, Katwe, Kayanja, Kishenyi Rwenshama and Katunguru and are located within Queen Elizabeth Conservation Area (QECA). In spite of being the main source of livelihood, 74% of the respondents in a 2013 survey reported that catches for the main targeted fish species namely: Bagrus docmak (Semutundu), Oreochromis niloticus (Tilapia) and Protopterus aethiopicus (Mamba) were declining due to overfishing and catching of immature fish by the rapidly increasing population. Lake Edward Frame surveys had shown that the number of fishing crafts increased from 302 in 2008 to 330 in 2011, while the number of fishers increased from 355 to 600 during the same period. Between 2008 and 2010, catch per boat, for Bagrus docmak (Semutundu) declined from 5.25 kg to 4.04 kg and for Protopterus aethiopicus (Mamba) from 2.63 kg to 1.03kg. It has been suggested that reducing pressure on the lake should be handled using different approaches, one of which is introduction of programs for enhancing livelihood options which do not conflict with conservation of Queen Elizabeth Conservation Area (QECA). The main goal of this study was therefore to identify, prioritize and pilot livelihood options at selected landing sites of Lakes Edward and George.

On the fly type specialization without type analysis

Les langages de programmation typés dynamiquement tels que JavaScript et Python repoussent la vérification de typage jusqu’au moment de l’exécution. Afin d’optimiser la performance de ces langages, les implémentations de machines virtuelles pour langages dynamiques doivent tenter d’éliminer les tests de typage dynamiques redondants. Cela se fait habituellement en utilisant une analyse d’inférence de types. Cependant, les analyses de ce genre sont souvent coûteuses et impliquent des compromis entre le temps de compilation et la précision des résultats obtenus. Ceci a conduit à la conception d’architectures de VM de plus en plus complexes. Nous proposons le versionnement paresseux de blocs de base, une technique de compilation à la volée simple qui élimine efficacement les tests de typage dynamiques redondants sur les chemins d’exécution critiques. Cette nouvelle approche génère paresseusement des versions spécialisées des blocs de base tout en propageant de l’information de typage contextualisée. Notre technique ne nécessite pas l’utilisation d’analyses de programme coûteuses, n’est pas contrainte par les limitations de précision des analyses d’inférence de types traditionnelles et évite la complexité des techniques d’optimisation spéculatives. Trois extensions sont apportées au versionnement de blocs de base afin de lui donner des capacités d’optimisation interprocédurale. Une première extension lui donne la possibilité de joindre des informations de typage aux propriétés des objets et aux variables globales. Puis, la spécialisation de points d’entrée lui permet de passer de l’information de typage des fonctions appellantes aux fonctions appellées. Finalement, la spécialisation des continuations d’appels permet de transmettre le type des valeurs de retour des fonctions appellées aux appellants sans coût dynamique. Nous démontrons empiriquement que ces extensions permettent au versionnement de blocs de base d’éliminer plus de tests de typage dynamiques que toute analyse d’inférence de typage statique.

Does time ever fly or slow down? The difficult interpretation of psychophysical data on time perception.

Time perception is studied with subjective or semi-objective psychophysical methods. With subjective methods, observers provide quantitative estimates of duration and data depict the psychophysical function relating subjective duration to objective duration. With semi-objective methods, observers provide categorical or comparative judgments of duration and data depict the psychometric function relating the probability of a certain judgment to objective duration. Both approaches are used to study whether subjective and objective time run at the same pace or whether time flies or slows down under certain conditions. We analyze theoretical aspects affecting the interpretation of data gathered with the most widely used semi-objective methods, including single-presentation and paired-comparison methods. For this purpose, a formal model of psychophysical performance is used in which subjective duration is represented via a psychophysical function and the scalar property. This provides the timing component of the model, which is invariant across methods. A decisional component that varies across methods reflects how observers use subjective durations to make judgments and give the responses requested under each method. Application of the model shows that psychometric functions in single-presentation methods are uninterpretable because the various influences on observed performance are inextricably confounded in the data. In contrast, data gathered with paired-comparison methods permit separating out those influences. Prevalent approaches to fitting psychometric functions to data are also discussed and shown to be inconsistent with widely accepted principles of time perception, implicitly assuming instead that subjective time equals objective time and that observed differences across conditions do not reflect differences in perceived duration but criterion shifts. These analyses prompt evidence-based recommendations for best methodological practice in studies on time perception.

Filling in gaps of Drosophila melanogaster urate degradation metabolic pathway using metabolomics approaches: towards the core metabolome of the fruit fly

The primary goal of systems biology is to integrate complex omics data, and data obtained from traditional experimental studies in order to provide a holistic understanding of organismal function. One way of achieving this aim is to generate genome-scale metabolic models (GEMs), which contain information on all metabolites, enzyme-coding genes, and biochemical reactions in a biological system. Drosophila melanogaster GEM has not been reconstructed to date. Constraint-free genome-wide metabolic model of the fruit fly has been reconstructed in our lab, identifying gaps, where no enzyme was identified and metabolites were either only produced or consume. The main focus of the work presented in this thesis was to develop a pipeline for efficient gap filling using metabolomics approaches combined with standard reverse genetics methods, using 5-hydroxyisourate hydrolase (5-HIUH) as an example. 5-HIUH plays a role in urate degradation pathway. Inability to degrade urate can lead to inborn errors of metabolism (IEMs) in humans, including hyperuricemia. Based on sequence analysis Drosophila CG30016 gene was hypothesised to encode 5- HIUH. CG30016 knockout flies were examined to identify Malpighian tubules phenotype, and shortened lifespan might reflect kidney disorders in hyperuricemia in humans. Moreover, LC-MS analysis of mutant tubules revealed that CG30016 is involved in purine metabolism, and specifically urate degradation pathway. However, the exact role of the gene has not been identified, and the complete method for gap filling has not been developed. Nevertheless, thanks to the work presented here, we are a step closer towards the development of a gap-filling pipeline in Drosophila melanogaster GEM. Importantly, the areas that require further optimisation were identified and are the focus of future research. Moreover, LC-MS analysis confirmed that tubules rather than the whole fly were more suitable for metabolomics analysis of purine metabolism. Previously, Dow/Davies lab has generated the most complete tissue-specific transcriptomic atlas for Drosophila – FlyAtlas.org, which provides data on gene expression across multiple tissues of adult fly and larva. FlyAtlas revealed that transcripts of many genes are enriched in specific Drosophila tissues, and that it is possible to deduce the functions of individual tissues within the fly. Based on FlyAtlas data, it has become clear that the fly (like other metazoan species) must be considered as a set of tissues, each 2 with its own distinct transcriptional and functional profile. Moreover, it revealed that for about 30% of the genome, reverse genetic methods (i.e. mutation in an unknown gene followed by observation of phenotype) are only useful if specific tissues are investigated. Based on the FlyAtlas findings, we aimed to build a primary tissue-specific metabolome of the fruit fly, in order to establish whether different Drosophila tissues have different metabolomes and if they correspond to tissue-specific transcriptome of the fruit fly (FlyAtlas.org). Different fly tissues have been dissected and their metabolome elucidated using LC-MS. The results confirmed that tissue metabolomes differ significantly from each other and from the whole fly, and that some of these differences can be correlated to the tissue function. The results illustrate the need to study individual tissues as well as the whole organism. It is clear that some metabolites that play an important role in a given tissue might not be detected in the whole fly sample because their abundance is much lower in comparison to other metabolites present in all tissues, which prevent the detection of the tissue-specific compound.

Respiratory effects of biomass fuel combustion on rural fish smokers in a Nigerian fishing settlement: a case control study.

Backgroud: The aim was to study the prevalence of respiratory symptoms and assess the lung function of fish smokers in Nigeria. Methods: A case control study was done among fish smokers in Nigeria. Women aged 15 years or older (n=210) involved in fish smoking and equal number of matched controls were interviewed on respiratory symptoms and their peak expiratory flow rate (PEFR) measured. Data was analysed using chi square test, student\'s t-test and odd ratios. Results: Both groups were similar in their personal characteristics. The test group had significantly increased occurrence of sneezing (153; 72.86%), catarrh (159; 75.71%), cough (138; 65.71%) and chest pain (59; 28.10%) compared with the control group, odds ratio (OR) 2.49, 95% confidence interval CI (1.62-3.82), P < 0.001), OR 3.77,95% CI (2.44- 5.85), P < 0.001, OR 3.38, 95% CI (2.22-5.15), P < 0.001, and OR 6.45,95% CI (3.22-13.15), P < 0.001, respectively. The mean PEFR of 321±58.93 L/min among the fish smokers was significantly lower than 400±42.92 L/min among the controls (p = 0.0001). Conclusion: Fish smokers have increased risk of respiratory symptoms and reduced pulmonary function. There is a need for protective equipment and periodic evaluation.

Inverse identification of the bending stiffness of a braided polyethylene twine subject to large deformation: application to the identification of the mesh opening rigidity of fishing nets.

The evaluation of the mesh opening stiffness of fishing nets is an important issue in assessing the selectivity of trawls. It appeared that a larger bending rigidity of twines decreases the mesh opening and could reduce the escapement of fish. Nevertheless, netting structure is complex. A netting is made up of braided twines made of polyethylene or polyamide. These twines are tied with non-symmetrical knots. Thus, these assemblies develop contact-friction interactions. Moreover, the netting can be subject to large deformation. In this study, we investigate the responses of netting samples to different types of solicitations. Samples are loaded and unloaded with creep and relaxation stages, with different boundary conditions. Then, two models have been developed: an analytical model and a finite element model. The last one was used to assess, with an inverse identification algorithm, the bending stiffness of twines. In this paper, experimental results and a model for netting structures made up of braided twines are presented. During dry forming of a composite, for example, the matrix is not present or not active, and relative sliding can occur between constitutive fibres. So an accurate modelling of the mechanical behaviour of fibrous material is necessary. This study offers experimental data which could permit to improve current models of contact-friction interactions [4], to validate models for large deformation analysis of fibrous materials [1] on a new experimental case, then to improve the evaluation of the mesh opening stiffness of a fishing net

Effect of milling time on mechanical properties of fly ash incorporated cement mortars

Abstract. Currently, thermal energy generation through coal combustion produces ash particles which cause serious environmental problems and which are known as Fly Ash (FA). FA main components are oxides of silicon, aluminum, iron, calcium and magnesium in addition, toxic metals such as arsenic and cobalt. The use of fly ash as a cement replacement material increases long term strength and durability of concrete. In this work, samples were prepared by replacing cement by ground fly ash in 10, 20 and 30% by weight. The characterization of raw materials and microstructure was obtained by Scanning Electron Microscopy (SEM) and X-ray diffraction (XRD). The final results showed that the grinding process significantly improves the mechanical properties of all samples when compared replacing a mortar made with cement by ground fly ash and the reference samples without added fly ash. The beneficial effect of the ground fly ash can increase the use of this product in precast concrete industry

Application of stable isotope analysis to differentiate shrimp extracted by industrial fishing or produced through aquaculture practices.

Carbon and nitrogen stable isotope values were determined in Pacific white shrimp (Litopenaeus vannamei) with the objective of discriminating animals produced through aquaculture practices from those extracted from the wild. Farmed animals were collected at semi-intensive shrimp farms in Mexico and Ecuador. Fisheries-derived shrimps were caught in different fishing areas representing two estuarine systems and four open sea locations in Mexico and Ecuador. Carbon and nitrogen stable isotope values (13CVPDB and 15NAIR) allowed clear differentiation of wild from farmed animals. 13CVPDB and 15NAIR values in shrimps collected in the open sea were isotopically enriched (−16.99‰ and 11.57‰), indicating that these organisms belong to higher trophic levels than farmed animals. 13CVPDB and 15NAIR values of farmed animals (−19.72‰ and 7.85‰, respectively) partially overlapped with values measured in animals collected in estuaries (−18.46‰ and 5.38‰, respectively). Canonical discriminant analysis showed that when used separately and in conjunction, 13CVPDB and I5NAIR values were powerful discriminatory variables and demonstrate the viability of isotopic evaluations to distinguish wild-caught shrimps from aquaculture shrimps. Methodological improvements will define a verification tool to support shrimp traceability protocols.

Deciphering proteome dynamics using cell-type selective metabolic protein labeling in the fruit fly Drosophila melanogaster

Otto-von-Guericke-Universität Magdeburg, Fakultät für Naturwissenschaften, Dissertation, 2016

Biological Impacts and Uses of Black Bass Competitive Fishing Tournaments on Large Lake Systems

Thesis (Master, Biology) -- Queen's University, 2016-09-28 15:06:46.124

Beginner's guide to fishing

With some basic knowledge and minimum skill, a beginning angler can embark on a lifetime of fun, relaxation and camaraderie with other anglers. Discussed in this booklet are several styles of fishing, types of rods, reels, knots, baits, lures, freshwater fish and aquatic habitats. You’ll find tips to improve your skills and prepare you for a fun, exciting and successful fishing trip. You’ll also learn ways to protect your aquatic resources.

Summary of Commercial Fishing Laws for Other Equipment/Trotlines and General Commercial Fishing Information 2016-2017

Each year the South Carolina Department of Natural Resources, Marine Resources Division publishes a summary of the laws and regulations of commercial fishing in the state. This publication provides the license requirements, definitions, restrictions, and laws and regulations for the use of fishing equipment.