Multiuser dual-hop relaying over hybrid RF/FSO links

The performance of multiuser dual-hop relaying over mixed radio frequency/free-space optical (RF/FSO) links is investigated. RF links are used for the simultaneous data transmission from m single-antenna sources to the relay, which is equipped with n ≥ m receive antennas and a photo-aperture transmitter. The relay operates under the decode-and-forward protocol and utilizes the popular ordered V-BLAST technique to successively decode each user's transmitted stream. A common norm-based ordering approach is adopted, where the streams are decoded in an ascending order. After the V-BLAST decoding, the relay retransmits the initial information to the destination, which is equipped with a photo-detector, via a point-to-point FSO link in m consecutive timeslots. Analytical expressions for the end-to-end outage probability and average symbol error probability of each user are derived. Some engineering insights are manifested, such as the diversity order, the impact of the pointing error displacement on the FSO link and the severity on the turbulence-induced channel fading.

Investigation of the Impact of Dual-Lane Axle Spacing on Lateral Load Distribution, 2016

The spacing of adjacent wheel lines of dual-lane loads induces different lateral live load distributions on bridges, which cannot be determined using the current American Association of State Highway and Transportation Officials (AASHTO) Load and Resistance Factor Design (LRFD) or Load Factor Design (LFD) equations for vehicles with standard axle configurations. Current Iowa law requires dual-lane loads to meet a five-foot requirement, the adequacy of which needs to be verified. To improve the state policy and AASHTO code specifications, it is necessary to understand the actual effects of wheel-line spacing on lateral load distribution. The main objective of this research was to investigate the impact of the wheel-line spacing of dual-lane loads on the lateral load distribution on bridges. To achieve this objective, a numerical evaluation using two-dimensional linear elastic finite element (FE) models was performed. For simulation purposes, 20 prestressed-concrete bridges, 20 steel bridges, and 20 slab bridges were randomly sampled from the Iowa bridge database. Based on the FE results, the load distribution factors (LDFs) of the concrete and steel bridges and the equivalent lengths of the slab bridges were derived. To investigate the variations of LDFs, a total of 22 types of single-axle four-wheel-line dual-lane loads were taken into account with configurations consisting of combinations of various interior and exterior wheel-line spacing. The corresponding moment and shear LDFs and equivalent widths were also derived using the AASHTO equations and the adequacy of the Iowa DOT five-foot requirement was evaluated. Finally, the axle weight limits per lane for different dual-lane load types were further calculated and recommended to complement the current Iowa Department of Transportation (DOT) policy and AASHTO code specifications.

Collaudo funzionale di un inverter trifase per trazione elettrica stradale

Lo scopo della tesi è collaudare un inverter trifase per trazione elettrica stradale al fine di determinarne le specifiche nominali e di massima. Il lavoro è stato organizzato procedendo inizialmente con l’individuazione delle parti principali che concorrono alla formazione del convertitore, studiandone il principio di funzionamento e i diversi valori di tensione e di corrente che ne caratterizzano le prestazioni. Successivamente si è passati al collaudo della parte di potenza del convertitore con l’obiettivo di determinarne le prestazioni in relazione alla massima temperatura consentita di funzionamento. Questo tipo di prova ha richiesto l’individuazione di una sorgente di alimentazione dell’inverter in grado di fornire i picchi di potenza necessari durante la fase di sovraccarico (si tratta di diversi kW per alcune decine di secondi) e contemporaneamente di un carico trifase in grado di assorbire queste potenze senza danneggiarsi. E’ molto importante tenere presente che la prova per la determinazione delle prestazioni nominali dell’inverter, richiede una durata di diverse decine di minuti cioè fin tanto che l’inverter non ha raggiunto l’equilibrio termico e quindi la temperatura non varia apprezzabilmente nel tempo. Allo scopo si è impiegata come sorgente di alimentazione un pacco di batterie Litio-Ioni costituito da 32 celle da 160Ah collegate in serie per una tensione nominale di 105V, mentre come carico si è utilizzato un motore asincrono trifase collegato direttamente in uscita dell’inverter.

Analisi della stabilità motoria durante il cammino: come gli indici di variabilità e stabilità dell'accelerazione del centro di massa sono influenzati da processi cognitivi (dual-task)

La valutazione strumentale del cammino è solitamente svolta chiedendo ai soggetti semplicemente di camminare (ST). Tale condizione non rappresenta la quotidianità. Infatti, nella vita di tutti i giorni la locomozione richiede di adattarsi alle necessità individuali e il coinvolgimento di attività cognitive. I paradigmi di Dual-Task (DT) sono utilizzati per valutare i cambiamenti nella strategia di controllo del cammino in situazioni di vita quotidiana. In particolare, gli indici di performance, di variabilità e di stabilità, utilizzati nella valutazione del controllo motorio, potrebbero essere utili per valutare le interferenze cognitive durante il cammino. L’obiettivo del lavoro è di valutare come tali indici cambiano durante il Dual-Task. Sono stati reclutati 16 studenti, giovani e sani, della Facoltà di Ingegneria Biomedica di Cesena, ai quali è stato chiesto di compiere un cammino rettilineo di 250 m, senza ostacoli, all’aperto, in due condizioni: svolgendo la sola attività di cammino (ST); aggiungendo al precedente task, una sottrazione consecutiva di 7 ad alta voce, partendo da un numero casuale (DT). Tramite tre sensori inerziali tri-assiali, posti sul tronco (L5) e sulle caviglie, sono stati acquisiti i segnali di accelerazione e velocità angolare. Dopo aver calcolato, a partire da tali dati, indici di performance (numero di passi, cadence, velocità e tempo di esecuzione del test), di variabilità (Standard Deviation, Coefficient of Variation, Index of the Variance, Nonstationary Index, Poincare 4 Plots) e di stabilità (Harmonic Ratio e Index of Harmonicity), nelle due condizioni (ST e DT), è stata eseguita un’analisi statistica tra i due task. Le analisi statistiche condotte su tali indici hanno evidenziato che il DT influenza prevalentemente gli indici di performance (numero di passi, cadence, velocità e tempo di esecuzione del test) e in grado minore gli indici di variabilità e stabilità.

Examining the Longitudinal Stability of a Dual-Factor Model of Mental Health in Early Elementary School Students

Thesis (Ph.D.)--University of Washington, 2016-08

Under The Dual System: Children Of Rural-Hukou Migrants In China

Thesis (Ph.D.)--University of Washington, 2016-06

Dual stimulation of antigen presenting cells using carbon nanotube-based vaccine delivery system for cancer immunotherapy

Although anti−cancer immuno−based combinatorial therapeutic approaches have shown promising results, efficient tumour eradication demands further intensification of anti−tumour immune response. With the emerging field of nanovaccinology, multi−walled carbon nanotubes (MWNTs) have manifested prominent potentials as tumour antigen nanocarriers. Nevertheless, the utilization of MWNTs in co−delivering antigen along with different types of immunoadjuvants to antigen presenting cells (APCs) has not been investigated yet. We hypothesized that harnessing MWNT for concurrent delivery of cytosine−phosphate−guanine oligodeoxynucleotide (CpG) and anti-CD40 Ig (αCD40), as immunoadjuvants, along with the model antigen ovalbumin (OVA) could potentiate immune response induced against OVA−expressing tumour cells. We initially investigated the effective method to co−deliver OVA and CpG using MWNT to the APC. Covalent conjugation of OVA and CpG prior to loading onto MWNTs markedly augmented the CpG−mediated adjuvanticity, as demonstrated by the significantly increased OVA−specific T cell responses in vitro and in C57BL/6 mice. αCD40 was then included as a second immunoadjuvant to further intensify the immune response. Immune response elicited in vitro and in vivo by OVA, CpG and αCD40 was significantly potentiated by their co−incorporation onto the MWNTs. Furthermore, MWNT remarkably improved the ability of co−loaded OVA, CpG and αCD40 in inhibiting the growth of OVA−expressing B16F10 melanoma cells in subcutaneous or lung pseudo−metastatic tumour models. Therefore, this study suggests that the utilization of MWNTs for the co−delivery of tumour−derived antigen, CpG and αCD40 could be a competent approach for efficient tumours eradication.

Simulation of a resonant inverter

Mostly developed since the Industrial Revolution, the automation of systems and equipment around us is responsible for a technological progress and economic growth without precedents, but also by a relentless energy dependence. Currently, fossil fuels still tend to come as the main energy source, even in developed countries, due to the ease in its extraction and the mastery of the technology needed for its use. However, the perception of its ending availability, as well as the environmental impact of this practice has led to a growing energy production originated from renewable sources. Easy maintenance, coupled with the fact that they are virtually inexhaustible, makes the solar and wind energy very promising solutions. In this context, this work proposes to facilitate energy production from these sources. To this end, in this work the power inverter is studied, which is an equipment responsible for converting DC power available by solar or wind power in traditional AC power. Then it is discussed and designed a new architecture which, in addition to achieve a high energy e - ciency, has also the ability to adapt to the type of conversion desired by the user, namely if he wants to sell electricity to the power grid, be independent of it or bet on a self consumption system. In order to achieve the promised energy e ciency, the projected inverter uses a resonant DC-DC converter, whose architecture signi cantly decreases the energy dissipated in the conversion, allowing a higher power density. The adaptability of the equipment is provided by an adaptive control algorithm, responsible for assessing its behavior on every iteration and making the necessary changes to achieve maximum stability throughout the process. To evaluate the functioning of the proposed architecture, a simulation is presented using the PLECS simulation software.

Plasma diagnostics and ITO film deposition by RF-assisted closed-field dual magnetron system

Deposition of indium tin oxide (ITO) among various transparent conductive materials on flexible organic substrates has been intensively investigated among academics and industrials for a whole new array of imaginative optoelectronic products. One critical challenge coming with the organic materials is their poor thermal endurances, considering that the process currently used to produce industry-standard ITO usually involves relatively high substrate temperature in excess of 200°C and post-annealing. A lower processing temperature is thus demanded, among other desires of high deposition rate, large substrate area, good uniformity, and high quality of the deposited materials. For this purpose, we developed an RF-assisted closed-field dual magnetron sputtering system. The “prototype” system consists of a 3-inch unbalanced dual magnetron operated at a closed-field configuration. An RF coil was fabricated and placed between the two magnetron cathodes to initiate a secondary plasma. The concept is to increase the ionization faction with the RF enhancement and utilize the ion energy instead of thermal energy to facilitate the ITO film growth. The closed-field unbalanced magnetrons create a plasma in the intervening region rather than confine it near the target, thus achieving a large-area processing capability. An RF-compensated Langmuir probe was used to characterize and compare the plasmas in mirrored balanced and closed-field unbalanced magnetron configurations. The spatial distributions of the electron density ne and electron temperature Te were measured. The density profiles reflect the shapes of the plasma. Rather than intensively concentrated to the targets/cathodes in the balanced magnetrons, the plasma is more dispersive in the closed-field mode with a twice higher electron density in the substrate region. The RF assistance significantly enhances ne by one or two orders of magnitude higher. The effect of various other parameters, such as pressure, on the plasma was also studied. The ionization fractions of the sputtered atoms were measured using a gridded energy analyzer (GEA) combined with a quartz crystal microbalance (QCM). The presence of the RF plasma effectively increases the ITO ionization fraction to around 80% in both the balanced and closed-field unbalanced configurations. The ionization fraction also varies with pressure, maximizing at 5-10 mTorr. The study of the ionization not only facilitates understanding the plasma behaviors in the RF-assisted magnetron sputtering, but also provides a criterion for optimizing the film deposition process. ITO films were deposited on both glass and plastic (PET) substrates in the 3-inch RF-assisted closed-field magnetrons. The electrical resistivity and optical transmission transparency of the ITO films were measured. Appropriate RF assistance was shown to dramatically reduce the electrical resistivity. An ITO film with a resistivity of 1.2×10-3 Ω-cm and a visible light transmittance of 91% was obtained with a 225 W RF enhancement, while the substrate temperature was monitored as below 110°C. X-ray photoelectron spectroscopy (XPS) was employed to confirm the ITO film stoichiometry. The surface morphology of the ITO films and its effect on the film properties were studied using atomic force microscopy (AFM). The prototype of RF-assisted closed-field magnetron was further extended to a larger rectangular shaped dual magnetron in a flat panel display manufacturing system. Similar improvement of the ITO film conductivities by the auxiliary RF was observed on the large-area PET substrates. Meanwhile, significant deposition rates of 25-42 nm/min were achieved.

Separating deviant and non-deviant sexual preferences with a dual-target rapid serial visual presentation task

Forskning visar att avvikande sexuell preferens (ASP) är en av de mest centrala prediktorerna för återfall i sexualbrott. Eftersom det är viktigt att det i juridiskt beslutsfattande och behandling av sexualförbrytare finns valida och standardiserade verktyg att tillgå för bedömning av ASP, har forskningen under de senaste åren fokuserats på uppmärksamhetsbaserade metoder. Syftet med avhandlingen var att förbättra uppmärksamhetsbaserade metoder genom utvecklingen av en s.k. Rapid Serial Visual Presentation (dtRSVP) metod för att identifiera ASP. Innan vi testade sampel med sexualbrottslingar så genomförde vi tre studier för att kalibrera förfarandena. I dessa studier undersökte vi möjligheten att differentiera mellan homosexuella och heterosexuella män och hur enkelt deltagarna kunde fuska. Dessutom skapade vi en ny uppsättning standardiserade stimuli för bedömningen av pedofilt sexuellt intresse (Virtual People Set, VPS). I skapandet av stimuli togs de etiska och juridiska problemen i beaktande så långt som möjligt. När vi använde dtRSVP som mätningsförfarande för att skilja åt sexuellläggning i ett sampel av homosexuella och heterosexuella män fann vi att sexuellt relevanta stimuli påverkade informationsbehandlingen på ett förutsägbart sätt. Förfarandet hade en god förmåga att skilja sexuella preferenser mellan grupperna och förfarandet var svårt att påverka genom att fuska. När vi använde dtRSVP som mätningsförfarande för att identifiera avvikande sexuell läggning bland dömda sexbrottslingar fann vi att de visade en annorlunda bearbetning av sexuella stimuli jämfört med andra deltagare och att dessa skillnader var i de förväntade riktningarna. Det var däremot svårt att dra några slutsatser angående denna mätmetods förmåga att skilja mellan grupperna pedofiler och icke-pedofiler. Slutligen fann vi att VPS verkar vara ett användbart stimuluspaket för experimentell forskning om pedofilt sexuellt intresse. ---------------------------------------------------- Tutkimuksien mukaan poikkeava seksuaalinen mieltymys (PSM) on yksi seksuaalirikoksen uusimisen keskeisimmistä ennustajista. Oikeudellisessa päätöksenteossa ja seksuaalirikollisten hoidossa on tärkeää, että on käytettävissä kelvollisia ja standardisoituja välineitä PSM:n arvioinnissa. Sen vuoksi on tutkimuksissa viime vuosina keskitytty huomaavaisuuteen perustuviin menetelmiin. Tämän tutkielman tarkoitus oli parantaa huomaavaisuuteen perustuvia menetelmiä kehittämällä nk. Rapid Serial Visual Presentation (dtRSVP) menetelmän. Kalibroidakseen menettelytapoja suoritettiin kolme tutkimusta ennen kuin tutkittiin koeryhmää, johon kuuluvat seksuaalirikollisia. Näissä tutkimuksissa tutkittiin mahdollisuutta erotella homoseksuaalisia ja heteroseksuaalisia miehiä ja tutkittiin missä määrin osallistujien oli helppo huiputtaa. Sen lisäksi, pedofiilisen seksuaalisen mieltymyksen arviointia varten kehitettiin uutta sarjaa standardisoituja virikkeitä (Virtual People Set, VPS). Kehitettäessä virikkeitä otettiin mahdollisimman pitkälti huomioon eettisiä ja oikeudellisia ongelmia. Käytettäessä dtRSVP mittausmenetelmää erotellakseen homo- ja heteroseksuaalista suuntautumista havaitsimme, että seksuaaliset virikkeet vaikuttivat tietojenkäsittelyyn ennustettavalla tavalla. Menettelytavan avulla pystyttiin erotella koeryhmässä olevia seksuaalisia mieltymyksiä ja menettelytapaan oli vaikeaa vaikuttaa huijaamalla. Käytettäessä dtRSVP mittausmenetelmää tunnistaakseen poikkeavaa seksuaalista mieltymystä tuomittujen seksuaalirikollisten keskenään havaitsimme, että he osoittivat erilaista käsittelyä seksuaalisista virikkeistä toisiin osallistujiin verrattuna ja tulokset olivat ennustettavia. Silti oli vaikeaa tehdä johtopäätöksiä mittausmenetelmän kyvystä erotella ryhmiä pedofiilisiä ja ei-pedofiilisiä miehiä. Lopuksi havaitsimme, että VPS näyttää olevan käyttökelpoinen stimulussarja pedofiilisen seksuaalisen mieltymyksen kokeellisissa tutkimuksissa.

AtDeg2 – a chloroplast protein with dual protease/chaperone activity

Chloroplast protease AtDeg2 (an ATP-independent serine endopeptidase) is cytosolically synthesized as a precursor, which is imported into the chloroplast stroma and deprived of its transit peptide. Then the mature protein undergoes routing to its functional location at the stromal side of thylakoid membrane. In its linear structure AtDeg2 molecule contains the protease domain with catalytic triad (HDS) and two PDZ domains (PDZ1 and PDZ2). In vivo AtDeg2 most probably exists as a supposedly inactive haxamer, which may change its oligomeric stage to form active 12-mer, or 24-mer. AtDeg2 has recently been demonstrated to exhibit dual protease/chaperone function. This review is focused on the current awareness with regard to AtDeg2 structure and functional significance.

Balancing the demands of two tasks: an investigation of cognitive-motor dual-tasking in relapsing remitting multiple sclerosis

Background: People with relapsing remitting MS (PwRRMS) suffer disproportionate decrements in gait under dual-task conditions, when walking and a cognitive task are combined. There has been much less investigation of the impact of cognitive demands on balance. This study investigated whether: (1) PwRRMS show disproportionate decrements in postural stability under dual-task conditions compared to healthy controls; (2) dual-task decrements are associated with everyday dual-tasking difficulties. In addition, the impact of mood, fatigue and disease severity on dual-tasking were also examined. Methods: 34 PwRRMS and 34 matched controls completed cognitive (digit span) and balance (movement of centre of pressure on a Biosway, on stable and unstable surfaces) tasks under single and dual-task conditions. Everyday dual-tasking was measured using the DTQ. Mood was measured by the HADS. Fatigue was measured via the MFIS. Results: No differences in age, gender, years of education, estimated pre-morbid IQ or baseline digit span between the groups. Compared to healthy controls, PwRRMS showed a significantly greater decrement in postural stability under dual-task conditions on an unstable surface (p=0.007), but not a stable surface (p=0.679). PwRRMS reported higher levels of everyday dual-tasking difficulties (p<0.001). Balance decrement scores were not correlated with everyday dual-tasking difficulties, or with fatigue. Stable surface balance decrement scores were significantly associated with levels of anxiety (rho=0.527, p=0.001) and depression (rho=0.451, p=0.007). Conclusion: RRMS causes difficulties with dual-tasking, impacting balance, particularly under challenging conditions, which may contribute to an increased risk of gait difficulties and falls. The striking relationship between anxiety/depression and dual-task decrement suggests that worry may be contributing to dual-task difficulties.

Dual regulation of P-glycoprotein expression by Trichostatin A in cancer cell lines

Background. It has been reported that the histone deacetylase inhibitor (iHDAc) trichostatin A (TSA) induces an increase in MDR1 gene transcription (ABCB1). This result would compromise the use of iHDACs in combination with other cytotoxic agents that are substrates of P-glycoprotein (Pgp). It has also been reported the use of alternative promoters by the ABCB1 gene and the existence of a traslational control of Pgp protein. Finally, the ABCB1 gene is located in a genetic locus with the nested gene RUNDC3B in the complementary DNA strand, raising the possibility that RUNDC3B expression could interfere with ABCB1 alternative promoter regulation. Methods. A combination of RT-PCR, real time RT-PCR, Western blot and drug accumulation assays by flow cytometry have been used in this study. Results. The iHDACs-induced increase in MDR1 mRNA levels is not followed by a subsequent increase in Pgp protein levels or activity in several pancreatic and colon carcinoma cell lines, suggesting a traslational control of Pgp in these cell lines. In addition, the MDR1 mRNA produced in these cell lines is shorter in its 5' end that the Pgp mRNA produced in cell lines expressing Pgp protein. The different size of the Pgp mRNA is due to the use of alternative promoters. We also demonstrate that these promoters are differentially regulated by TSA. The translational blockade of Pgp mRNA in the pancreatic carcinoma cell lines could be related to alterations in the 5' end of the MDR1 mRNA in the Pgp protein expressing cell lines. In addition, we demonstrate that the ABCB1 nested gene RUNDC3B expression although upregulated by TSA is independent of the ABCB1 alternative promoter used. Conclusions. The results show that the increase in MDR1 mRNA expression after iHDACs treatment is clinically irrelevant since this mRNA does not render an active Pgp protein, at least in colon and pancreatic cancer cell lines. Furthermore, we have demonstrated that TSA in fact, differentially regulates both ABCB1 promoters, downregulating the upstream promoter that is responsible for active P-glycoprotein expression. These results suggest that iHDACs such as TSA may in fact potentiate the effects of antitumoral drugs that are substrates of Pgp. Finally, we have also demonstrate that TSA upregulates RUNDC3B mRNA independently of the ABCB1 promoter in use.