Feasibility of ASH DEC‐ process in treating sewage sludge and manure ash in Finland

In Finland the thermal treatment of sewage sludge has been moderate in 21th century. The reason has been the high moisture content of sludge. During 2005-2008, 97-99% of sewage sludge was utilized in landscaping and agriculture. However agricultural use has been during 2005-2007 less than 3 %. The aim of national waste management plan is that by 2016 100% of sludge is used either as soil amendment or energy. The most popular utilization method for manure is spreading it on arable land. The dry manures such as poultry manure and horse manure could also be used in incineration. The ashes could be used as fertilizers and while it is not suitable as a starter fertilizer, it is suitable in maintaining P levels in the soil. One of the main drivers for more efficient nutrient management is the eutrophication in lakes and the Baltic See. ASH DEC process can be used in concentrating phosphorus rich ashes while separating the heavy metals that could be included. ASH DEC process uses thermochemical treatment to produce renewable phosphate for fertilizer production. The process includes mixing of ashes and chlorine donors and subsequent treatment in rotary kiln for 20 min in temperature of 900 – 1 050 oC. The heavy metals evaporate and P-rich product is obtained. The toxic substances are retained in air pollution control system in form of mixed metal hydroxides. The aim of conducting this study is to estimate the potential of ASH DEC process in treating phosphorus rich ashes in Finland. The masses considered in are sewage sludge, dry manure from horses, and poultry and liquid pig manure. To date the usual treatment method for sewage sludge in Finland is composting or anaerobic digestion. Part of the amount of produced sewage sludge (800 kt/a fresh mass and 160 kt/a TS) could also be incinerated and the residual ashes used in ASH DEC process. Incinerating only manure can be economically difficult to manage because the incineration of manure is in Finland considered as waste incineration. Getting a permit for waste incineration is difficult and also small scale waste incineration is too expensive. The manure could act as an additional feedstock in counties with high density of animal husbandry where the land area might not be enough for spreading of manure. Now when the manure acts as a supplementary feedstock beside sludge, the ash can’t be used directly as fertilizer. Then it could be used in ASH DEC process. The perquisite is that the manure producers could pay for the incineration, which might prove problematic.

Agility in international fast fashion retailing

The birth of Internet technologies, the developments of fast fashion and multiple retailing channels have created a need for a new, more integrated way for doing retailing. Agility in fast fashion retailing could be seen as a significant way of responding to these changes and furthermore, as a way to respond to consumers’ altering demands. The purpose of this study was to explore the ways in which agile supply chains and integrated multichannel retailing influence the international fast fashion retailing. A framework for agility in retail was developed based on available theoretical considerations in distribution and communication channels. Qualitative research methods and qualitative content analysis were used. Four expert interviews were carried out to gain new perspectives to the objectives. The rest of the data was collected from an industry specific document, expert video and two expert lectures. Following the data collection, the research material was analyzed with qualitative content analysis. The empirical findings on agility in retail were presented based on a coding frame. It was found that agility in retail has multiple parts, which are overlapping and affecting one another. Furthermore, instead of viewing the agile supply chain and integrated multichannel retailing separately of each other as usual, it was found that they should be integrated, and the term “agility” was proposed to denote this approach. Also, it was found that the most common drivers and constrains of integrated multichannel retailing were the new Internet technologies and customer demand. Brick-and-mortar store, online store, mobile devices and social media were found to be the most common retailing channels. Furthermore, in-store technology, click-and-collect approach, NFC-buying, RFID-technology as well as 3D- digital simulations on fabrics and patterns will enhance agility even more in the future. In addition, environmental issues, customer experiences and communication will be important factors. This study has provided new practical insights for the future retailing. Furthermore, it has contributed to the academic research by discussing the traditional approaches of agility in fast fashion retail and bringing in new insights.

Entrepreneurial orientation in small and medium-sized enterprises during economic crisis

The economic importance of small and medium-sized enterprises (SMEs) and entrepreneurship has increased significantly in recent decades and entrepreneurial activity and SMEs are deemed vital to economic progress. Therefore, it is justifiable to study how small firms and entrepreneurs can enhance their performance and emergence in the turbulent economic environment. The concept of entrepreneurial orientation (EO) has recently attracted considerable attention in the field of entrepreneurship research. EO generally refers to a firm’s propensity to be innovative, to be proactive and to take risks. A majority of EO studies so far have found that adopting EO associated entrepreneurial behaviors will help firms to create or sustain a high level of performance. This dissertation explores the main drivers and performance implications of EO for SMEs in time of economic crisis. Hence the first objective of this dissertation is to examine the performance implications of EO and to test the role of EO on how firms are treated by the crisis at operative level. The second objective is to expand the prevailing understanding of determinants of EO by exploring the relationship between owner's work related values, attitudes, demographic characteristics, firm’s financial resources and EO. EO was found to be a significant and positive factor behind a firm’s long run growth. Hence it can be said that EO has positive implications for firm performance. But on the other hand, during a time of economic crisis the different dimensions of EO had both positive and negative effects on performance of SMEs. The performance implications varied across different stages of the crisis and were also dependent on what measure was used for measuring the performance. The main drivers of EO in SMEs were the personal work related values of the entrepreneur and his/her prior experience as an entrepreneur. The intrinsic work values related to interest, responsibility, challenge, self-development or intellectual stimulation and values related to status, power, achievement and recognition had a positive effect on the level of EO. On the other hand, extrinsic values related to high income, material possessions, benefits such as generous holidays, job security, and comfort through good working conditions decreased the level of EO

Kestävät liiketoimintamallit 2030

Tutkimuksen tavoitteena on tunnistaa erilaisia tulevaisuuskuvia siitä, miltä tulevaisuuden kestävät liiketoimintamallit voisivat näyttää vuonna 2030 ja miten toivottuun tulevaisuuskuvaan päästään. Lisäksi tavoitteena on esittää perusteluja mitä kestävällä liiketoimintamallilla ylipäänsä tarkoitetaan. Eksploratiivisen tutkimuksen aineisto on kerätty tulevaisuuden tutkimuksen piirissä paljon käytetyllä Delfoi-menetelmällä. Ymmärrys kestävien liiketoimintamallien luonteesta pohjautuu systemaattiseen kirjallisuuskatsaukseen. Tutkimus käsittää teoriakatsauksen kestävistä liiketoimintamalleista ja kestävää liiketoimintaa tukevasta liiketoimintaympäristöstä. Lisäksi empiriaosuudessa esitetään asiantuntijanäkemyksiä kestävien liiketoimintamallien ominaispiirteistä vuonna 2030 ja muutoksen aikaansaamiseen vaikuttavista tekijöistä. Tuloksena on esitys tulevaisuuden todennäköisistä sekä toivottavista kehityskuluista, kuvaus edellytyksistä, joita kestävien liiketoimintamallien yleistyminen vaatii sekä esitys kestävien liiketoimintamallien arvioimiseksi ja kehittämiseksi. Tämä tutkimus on toteutettu osana Tekesin Green Growth – Tie kestävään talouteen ohjelman 2011–2015 käynnissä olevaa DemaNET (Dematerialization and Sustainable Competitiveness through New Models for Industrial Networking) -tutkimusprojektia.

Biodegradable packaging materials in 2013 and their feasibility in chocolate industry

The development of biopolymers has been rapid in recent years and the range of available bioplastics is increasing continuously, driven by a growing demand for sustainable solutions. There are several key drivers behind this growth. The oil reservoirs are decreasing which is causing a price increase for the traditional plastic materials and therefore the gap to bioplastics’ price is getting smaller. In addition, other environmental topics, such as waste disposal and green production, have become more and more important factors for institutes, companies and consumers. Legislation and directives have to be taken into account as well in decision making concerning different packaging materials. The new environmental law with waste disposal responsibility will also have an effect on the packaging business. Therefore a need has risen to study closer the current offering closer of bio-based materials that could be used in chocolate packaging. In this Master’s Thesis the bioplastics’, and especially biodegradable materials’ technical properties and their development, availability, possible existing products in the markets, waste disposal possibilities and consumers attitude towards environmental friendly packaging is studied. This is a case study where the offering of biodegradable materials was investigated during March 2013 for Fazer Confectionary.

Key factors in transforming university internationalization into commercial activity in Finland. Case of University of Turku

Globalization, developments in ICT, emergence of knowledge society and other changes have reformed the environment for international higher education during the past few decades. Consequently, higher education sector has moved towards more marketing-oriented system, and universities have started to undertake commercial activities as part of their internationalization. This development has emerged to Finland as well, which forms the basis for this study. The purpose is to examine commercialization in Finnish university landscape and to investigate the ways Finnish university could capitalize its international activities and educational knowledge for export. The research question of the study is: What are the key factors in transforming university internationalization into commercial activity in the Finnish university landscape? The main problem is further divided into three sub-questions: 1) How can a university internationalize; 2) what are the motivational factors behind university internationalization and commercialization; and 3) how can higher education be developed into export services and products? The research was conducted as a qualitative case study of University of Turku. Methods used for gathering and examining data were interviewing and document analysis. Primary data was collected through four individual semi-structured interviews, which were conducted face-to-face. Secondary data that included reports, articles and electronic materials such as university web pages, was used to complement the primary data. The results were analyzed by theming the data into three broader categories of internationalization activities; drivers and motivations and; education export activities. After the data was organized in themes, analysis continued by comparing different parts of data and finding patterns that would explain the phenomenon in Finnish universities. According to the empirical data, University of Turku is currently on the growth state of internationalization with strategies such as internationalization of curriculum, establishment of international research groups, mobility of students and academics, international networking and support services. Commercialization phenomenon is still rather new to the case university, but it has already developed educational products and services for export. The study concludes that university internationalization cannot be directly transformed into commercial activities in the Finnish context, but the universities need to be active in actually creating educational products. The key factors found in this study include: 1) the Finnish government policies behind the current hype of export education; 2) the potential and knowledge capacity of universities for exports; 3) need for additional profits; 4) further internationalization through commercial activities; 5) recognizing and exploiting the specific areas of strength and 6) establishing of cooperative partnerships for better products.

Rakennuskonepalveluita tuottavan pk-yrityksen investointi- ja kustannusmalli

Tämän tutkimuksen päätavoitteena oli luoda yleisellä tasolla kustannusmalli maarakennuskonepalveluita tuottavien pk-yritysten käyttöön ja käytännön päätöstilanteiden avuksi osana päätöksenteko organisaation ja myyntityötä tekevän portaan kustannustarkkailuun. Mallin luomisen tarkoituksena oli että mallia voidaan helposti muokata erilaisten myyntitilanteiden kannattavuuksien tarkasteluun ja sitä kautta malli luo käyttäjilleen etulyöntiaseman luodessa pitkiä palvelusopimuksia ja erilaisten projektityömaiden myyntisopimuksia simuloimalla kaluston siirtokustannuksia olemassa olevien tiedettyjen kustannustekijöiden toimesta. Teollisuudessa ja palvelujentarjoajapuolella on vastaavia malleja esitetty, mutta erityisesti maarakennuspuolen ja konevuokrauksen kustannuslaskentamalleja ei julkisesta ole juurikaan saatavilla. Työn kustannusmallin muutoksia simuloitiin ja testattiin luomalla erilaisia kysyntäskenaarioita joista yksi esitellään tarkemmin työn testausosiossa. mallilla on helppo kasata kustannusdataa erilaisina yhtälöinä miten uudet työmaat ovat kannattavampia luomalla kokonaisvaltaisesti paljon lisää uusia työkohteita. Kustannusmallin rakentamiselle oli kysyntää ja tärkeänä tietona pidettiin kokonaisvaltaista muutosta ja tietoa millä tehollisilla tunneilla vastaavat hankinnat olisivat kannattavia. Työn teoriaosa pohjautuu pääasiassa hinnoittelun, kannattavuuden ja investointilaskelmien teoriaan, artikkeleihin ja tutkimuksiin sekä kirjoihin. Työn empiirinen osa perustuu arvioihin tämän hetken hintatasoista sekä arvioihin kustannusten kertymisestä maarakennuspalveluita tuottavissa pk-yrityksissä joissa organisaatiokaavio on matala ja toiminta tehokasta. Keskeisimmät tulokset liittyvät siihen miten kustannuksia tulee huomioida erilaisille asiakkaille ja millainen kustannusmalli on käyttökelpoinen eri tilanteissa.

Maintaining supply performance during an ERP system implementation phase : case Cloetta Suomi Oy

Implementing an enterprise resource planning (ERP) system often means a major change to an organization and involves significant risks. It is typical that many of the ERP system implementations fail resulting in tremendous damage to the business. Moreover, running normal business operations during an ERP system implementation is far more complicated than normally. This thesis focuses on how an organization should manage the ERP system implementation process in order to maintain supply performance during the implementation phase. The theoretical framework in this thesis focuses on ERP system implementations with a critical success factor approach. Critical success factors can be divided into strategic and tactical level success factors. By considering these critical success factors, ERP system implementation project’s timeline and best practices of an ERP implementation, a critical success factor based ERP system implementation management framework is presented. The framework can be used as a theoretical framework when the goal is to avoid ERP system implementation phase issues that are driven by the ERP system implementation project and that may decrease organization’s supply performance. This thesis is a case study that was written on an assignment to a confectionary company Cloetta Suomi Oy. In order to collect data, interviews of the case company personnel were conducted. In addition, several other data collection methods were used throughout the research process. These data collection methods include examination of presentations and archival records as well as direct observations in case company meetings and in various work duties. The results of this thesis indicate that there are several factors that may decrease organization’s supply performance during the ERP system implementation. These issues are categorized under external and internal issues and further into six risk drivers that are suppliers, customers, products, staff, information systems and other projects. After the description and categorization of each issue, the thesis focuses on finding solutions on how to avoid or mitigate the impact of these issues on the organization’s supply performance. This examination leads to several operational activities that are also practical to business practitioners. It is also stated that a successful ERP system implementation that also causes minimal disturbance to organization’s supply performance during the ERP system implementation, is achieved by considering three levels of actions.

Järjestelmätoimittajan kansainvälisen liiketoiminnan päätöksentekoa tukevien työkalujen kehittäminen

Kansainvälistyminen ja yritysten väliset kumppanuudet ovat muodostuneet Suomen yrityksille yhä tärkeämmiksi toiminnoiksi. Tämän tutkimuksen tavoitteena on selvittää minkälaiset työkalut ja tiedot tarvitaan kansainvälisten markkinoiden valinnan alkuvaiheessa sekä kumppanuuksien muodostamisessa rautatiejärjestelmiä toimittavalle yritykselle. Tarkasteltava perheyritys toimii PK-sektorilla. Tutkimus koostuu teoreettisesta katsauksesta kansainvälistymiseen ja kumppanuuksiin sekä empiirisestä osasta molempien aihepiirien soveltamisesta valitulla liiketoimintaalueella. Teoreettinen osuus tarkastelee kansainvälistymisen motivaatiotekijöitä ja erilaisia kansainvälistymisvaihtoehtoja paneutuen kansainvälistymisen prosessiin, riskeihin sekä riskien hallintaan. Tämän lisäksi teoriaosuudessa keskitytään yritysten välisiin kumppanuuksiin tarkastellen kumppanuuden muotoja, asemointia ja riskejä. Työn lopputuloksena syntyi hyvä näkemys rautatiemarkkinoiden toiminnasta, jonka tukemana pystyttiin valitsemaan tarkasteltavat arviointikohteet ja kehittämään työkalut kansainvälisten markkinoiden alkuvaiheen arviointiin sekä yrityksen tavoitteita tukevan kumppaniyrityksen valintaan. Nämä työkalut muodostavat pohjan kansainvälisten markkinoiden ja kumppanuuksien systemaattiseen tarkasteluun sekä tulosten jatkokäsittelyyn. Tulokset ja esitetyt kehitysehdotukset antavat hyvän lähtökohdan kansainvälisten markkinoiden ja yrityskumppanuuksien arvioinnin jatkokehittämiseen kohti kannattavampaa liiketoimintaa.

Industrial solution business – transition from product to solution offering

The business logic in the manufacturing industry has changed in the 21st century. In the current industrial market, manufacturers are driven to provide more comprehensive offerings that go beyond the traditional product-orientation by providing capacity and availability for their customers. From incidental merchandise, services have become the core of manufacturers’ offerings with long-lasting service agreements over the life-cycles of their products. This change is driven both by the need of providers to grow and gain competitive advantage and by increased customer demand caused by customers’ outsourcing trends. The three key drivers for manufacturers’ service strategies are outsourcing trends, saturation of the installed base, and commoditization in product markets. Thus, manufacturers focus on providing industrial solutions which are delivered through relational processes with customers by using solution-driven business models. In the management of marketing activities, this can be regarded as closer customer relationships, service-dominant business logic, and collaboration in solving customers’ problems. However, there are few studies on comprehensive conceptualizations of a solution offering that include different elements and their roles, especially in the context of capital goods industry. Also the transition process needs further studies in a real life context. This study explores the transition process of an industrial company from product to solution business and, as an aid to managing the solution business, explicates the structure and management of an industrial solution offering. There are two themes, the industrial transition process and industrial solution offering. Regarding the industrial transition process, the aim is to understand the supplier view on the process and its execution and to determine the challenges related to the transition process. The industrial solution offering is discussed by its elements and characteristics, as well as management. Furthermore, a special type of build-own-operate-transfer business model is presented and its suitability in the industrial context analyzed. The study includes findings achieved by qualitative methods and from four case companies. Based on the results, it is tentatively suggested that in the industrial solution business, the transition from product to solution business is not a linear project but an evolving process that varies according to customer needs, which suggests that companies need to possess an ability to develop new business models for different customer needs. The industrial solution offering is dynamic as it evolves in collaboration according to the prevailing and latent customer needs, which suggest restructuring of the organization from a product-centric to a customer-centric one. Furthermore, based on the findings, the concept of industrial solutions is defined as an ongoing relational process to satisfy a customer’s particular business or operational requirements, and the concept of industrial solution offering as an entity comprising the customized goods, services, collaboration, and finance needed to fulfill the industrial solution. Finally, the study offers several managerial implications for industrial managers involved in the transition and management of the solution business and its offering.

Vauhtikausi. Autoilun sukupuoli 1920-luvun Suomessa

The Age of Speed:Automobility’s Gender in the 1920s Finland The aim of this study is to analyze the connections between automobility and gender in Finland in the 1920s. In this study it is argued that the 1920s was the significant era in the Finnish history of automobility when many of the long-lasting gendered notions and cultural understandings were constructed. This study combines cultural history of technology with gender analysis. As the previous research on gender and technology has recognized, technology is a significant site of gender negotiations. Both from the cultural historical perspective and a gender perspective it is important to understand both technology and gender as cultural constructions. They were linked together and constructed each other. In other words: technology shapes gender and gender shapes technology. Historians of technology like Nina Lerman, Ruth Oldenziel and Arwen Mohun have argued that both gender and technology are about power: social, cultural, economic and political. In this study automobility means technology that can be analyzed in layers of identity, structures, institutions and representations. The source material consists of various types of historical sources, magazines and journals, advertisements, archival material together with films and literature. In the previous studies of the history of automobility gender has often been neglected. The term “gender” has also quite often been misunderstood. Some studies in the field have only focused on the early female drivers. However, far too little attention has been paid to the question, why automobility was considered as masculine sphere only. This study aims to give new insights to the previous interpretations of the history of automobility. As in various other countries also in Finland, the decade of the 1920s is characterized as a period of “modern times.” It was also the era of the automobiles. Although the number of cars in Finland was still low compared to the other European countries and the USA, in press, films and literature, images of automobiles and new women – and men – on the wheel became as an emblem of a new era. The thesis consists of three main chapters. The first main chapter focuses on the conflicts between drivers and non-drivers. The study shows how in the debate of the automobility “a driver” was constantly referred as a man and “a pedestrian” accordingly a woman, even though in the reality there were as much men and women walking on the streets and the roads. Thus, the public debate constructed and reconstructed the gendered traffic system where men were playing the key role. The second main chapter of the study analyses the automobile clubs and the cultural representations. The chapter answers the question how the concept of a driver was gendered. The Automobile clubs and the organizations of professional drivers were in a significant role in developing the early history of traffic in Finland. The Finnish Automobile Club (Suomen Automobiili Klubi, founded in 1919) was the oldest and the most powerful of all automobile organizations. The Finnish Automobile Club accepted women as members from the very beginning. The membership was strictly limited to the upper class and the very first female members were wives and daughters of the male members. However, Doctor of medicine and surgery 316 Karolina Eskelin (1867-1936) the founding member of the Club was an exception to that convention. The male members of the Finnish Automobile Club attended official international meetings and consulted Finnish authorities in traffic and road questions, whereas, female members joined car trips, picnics and social gatherings arranged by the club. Few young female members of the club drove in races and gross-country-tours. The cultural representations of drivers in the Finnish media in the 1920s both deconstructed and reconstructed the concept of gender. In Finnish press in general, motoring was seen as male dominated area. Men were represented as the experts of the automobility. The drivers’ uniforms and the automobile clubs underlined professionalism and expertise which, thus, got masculine meaning. Women were beautiful accessories in the car ads, but they were also becoming a new consumer group in the market. The representations of the female and the male drivers influenced and shaped actively the understandings of femininity and masculinity. In the third main chapter the analysis focuses on the automobile as an artifact.The automobile was considered as an artifact that primarily belonged to the masculine domain. However, the representations of the automobiles were ambivalent. The automobile was both masculine and feminine depending on the context. The representations of the automobile were also used to construct the discourse of heteronormativity.

Toimintolaskennan hyödyntäminen kalustealan yrityksessä

Tämän tutkimuksen tavoitteena oli laatia kohdeyrityksen käyttöön toimintolaskentamalli, joka käsittää yrityksen kahden tehtaan kaikki tuotantolinjat. Toimintolaskennan ohella tarkasteltiin myös kapeikkoajattelun tuomia näkökulmia yrityksen toiminnan kannattavuuden analysointiin. Tutkimuksen kohdeyritys toimii kiintokalustealalla ja sijoittuu kooltaan PK-luokkaan. Diplomityö koostuu kahdesta osasta; kirjallisuuden pohjalta laaditusta teoriatutkimuksesta sekä teorian pohjalta konstruktiivisesti muodostetusta empiirisestä osuudesta, jossa rakennetaan toimintolaskentamalli kohdeyrityksen käyttöön. Tutkimuksen teoriaosa käsittelee erityisesti toimintolaskennan rakennetta sekä laskentamallin luomista. Lisäksi teoriaosassa käsitellään myös kapeikkoajattelun mukaiset laskentamallit yrityksen toiminnan kannattavuuteen. Empiirisessä osassa laaditaan teoriaan perustuva toimintolaskentamalli yrityksen tuotantolinjoista. Tutkimuksen tuloksena laadittu yrityksen tietojärjestelmistä saatuihin tietoihin pohjautuva laskentamalli käsittää tuotantotoiminnan resurssit, resurssiajurit, toiminnot, toimintoajurit sekä laskentamallin laskentakohteet. Laskentamalli huomioi myös kapeikkoajattelun näkökulmat kapeikon hyödyntämisen maksimoinnista. Yritys voi käyttää laadittua laskentamallia toiminnan analysointiin kannattavuutta tuote-, tuoteryhmä-, toiminto-, tuotantolinja-, asiakas-, ja asiakasryhmätasoilla. Tulosten pohjalta voidaan päätellä toimintolaskennan ja kapeikkolaskennan tuovan käyttökelpoisia tuloksia, joita voidaan käyttää toiminnan tehostamisessa ja tuotehinnoittelussa päätöksenteon tukena.

Scenario-based traffic forecasts for the routes between the PENTA ports in 2020

Maritime transport is the foundation for trade in the Baltic Sea area. It represents over 15% of the world’s cargo traffic and it is predicted to increase by over 100% in the future. There are currently over 2,000 ships sailing on the Baltic Sea and both the number and the size of ships have been growing in recent years. Due to the importance of maritime traffic in the Baltic Sea Region, ports have to be ready to face future challenges and adapt to the changing operational environment. The companies within the transportation industry – in this context ports, shipowners and logistics companies – compete continuously and although the number of companies in the business is not particularly substantial because the products offered are very similar, other motives for managing the supply chain arise. The factors creating competitive advantage are often financial and related to cost efficiency, but geographical location, road infrastructure in the hinterland and vessel connections are among the most important factors. The PENTA project focuses on adding openness, transparency and sharing knowledge and information, so that the challenges of the future can be better addressed with regard to cooperation. This report presents three scenario-based traffic forecasts for routes between the PENTA ports in 2020. The chosen methodology is PESTE, in which the focus in on economic factors affecting future traffic flows. The report further analyses the findings and results of the first PENTA WP2 report “Drivers of demand in cargo and passenger traffic between PENTA ports” and utilises the same material, which was obtained through interviews and mail surveys.

Hitsattavan konstruktion laadun ja rakenteen kehittäminen lyöntipaalutuskoneessa

Työn tavoitteena oli Junttan Oy:n valmistaman lyöntipaalutuskoneeseen kuuluvan tärkeän konstruktion, peruskeilin, laadun ja rakenteen kehittäminen. Työ tehtiin osana Tekesin ja usean yrityksen rahoittamaa HitNet-projektia (Hitsaavan teollisuuden hankintatoimen ja toimitusketjun tehostaminen). Peruskeiliä tutkittiin seuraamalla sen valmistusta Junttan Oy:n omassa tuotannossa sekä alihankintayrityksissä. Ongelmana peruskeilin suunnittelussa ja valmistuksessa olivat hyvin tarkat toleranssirajat sen liukupinnoille. Suurimmat ongelmat syntyivät hitsaamisen tuoman suuren lämmöntuonnin aiheuttamien muodonmuutosten ja särmäyksestä johtuvan takaisinjouston yhteydessä. Näihin ongelmiin pyrittiin kehittämään ratkaisuja peruskeilin rakennetta muuttamalla, Total Welding Management -laatutyökalua hyödyntämällä sekä hitsaustoimintaa ja särmäystä kehittämällä. Peruskeilin suunnittelussa ja valmistuksessa havaittujen ongelmien perusteella kehitettiin useita ratkaisuja, joista yksi otettiin käyttöön ja siitä valmistetaan prototyyppi Junttan Oy:n omassa tuotannossa. Uuden mallin valmistuessa päätetään tuleeko siitä korvaaja edeltäjälleen vai testataanko vielä muita kehitysideoita.

In search of information systems value : a case study of the EHR benefits realisation efforts of three Swedish hospitals.

The Swedish public health care organisation could very well be undergoing its most significant change since its specialisation during the late 19th and early 20th century. At the heart of this change is a move from using manual patient journals to electronic health records (EHR). EHR are complex integrated organisational wide information systems (IS) that promise great benefits and value as well as presenting great challenges to the organisation. The Swedish public health care is not the first organisation to implement integrated IS, and by no means alone in their quest for realising the potential benefits and value that it has to offer. As organisations invest in IS they embark on a journey of value-creation and capture. A journey where a costbased approach towards their IS-investments is replaced with a value-centric focus, and where the main challenges lie in the practical day-to-day task of finding ways to intertwine technology, people and business processes. This has however proven to be a problematic task. The problematic situation arises from a shift of perspective regarding how to manage IS in order to gain value. This is a shift from technology delivery to benefits delivery; from an ISimplementation plan to a change management plan. The shift gives rise to challenges related to the inability of IS and the elusiveness of value. As a response to these challenges the field of IS-benefits management has emerged offering a framework and a process in order to better understand and formalise benefits realisation activities. In this thesis the benefits realisation efforts of three Swedish hospitals within the same county council are studied. The thesis focuses on the participants of benefits analysis projects; their perceptions, judgments, negotiations and descriptions of potential benefits. The purpose is to address the process where organisations seek to identify which potential IS-benefits to pursue and realise, this in order to better understand what affects the process, so that realisation actions of potential IS-benefits could be supported. A qualitative case study research design is adopted and provides a framework for sample selection, data collection, and data analysis. It also provides a framework for discussions of validity, reliability and generalizability. Findings displayed a benefits fluctuation, which showed that participants’ perception of what constituted potential benefits and value changed throughout the formal benefits management process. Issues like structure, knowledge, expectation and experience affected perception differently, and this in the end changed the amount and composition of potential benefits and value. Five dimensions of benefits judgment were identified and used by participants when finding accommodations of potential benefits and value to pursue. Identified dimensions affected participants’ perceptions, which in turn affected the amount and composition of potential benefits. During the formal benefits management process participants shifted between judgment dimensions. These movements emerged through debates and interactions between participants. Judgments based on what was perceived as expected due to one’s role and perceived best for the organisation as a whole were the two dominant benefits judgment dimensions. A benefits negotiation was identified. Negotiations were divided into two main categories, rational and irrational, depending on participants’ drive when initiating and participating in negotiations. In each category three different types of negotiations were identified having different characteristics and generating different outcomes. There was also a benefits negotiation process identified that displayed management challenges corresponding to its five phases. A discrepancy was also found between how IS-benefits are spoken of and how actions of IS benefits realisation are understood. This was a discrepancy between an evaluation and a realisation focus towards IS value creation. An evaluation focus described IS-benefits as well-defined and measurable effects and a realisation focus spoke of establishing and managing an on-going place of value creation. The notion of valuescape was introduced in order to describe and support the understanding of IS value creation. Valuescape corresponded to a realisation focus and outlined a value configuration consisting of activities, logic, structure, drivers and role of IS.