Predicting the distribution of Vibrio vulnificus in Chesapeake Bay

Vibrio vulnificus is a gram-negative pathogenic bacterium endemic to coastal waters worldwide, and a leading cause of seafood related mortality. Because of human health concerns, understanding the ecology of the species and potentially predicting its distribution is of great importance. We evaluated and applied a previously published qPCR assay to water samples (n = 235) collected from the main-stem of the Chesapeake Bay (2007 – 2008) by Maryland and Virginia State water quality monitoring programs. Results confirmed strong relationships between the likelihood of Vibrio vulnificus presence and both temperature and salinity that were used to develop a logistic regression model. The habitat model demonstrated a high degree of concordance (93%), and robustness as subsequent bootstrapping (n=1000) did not change model output (P > 0.05). We forced this empirical habitat model with temperature and salinity predictions generated by a regional hydrodynamic modeling system to demonstrate its utility in future pathogen forecasting efforts in the Chesapeake Bay.

Distribution of decapod larvae in the Bombay Harbour-Thana-Bassein Creek regions

Variations in the abundance and composition of larval decapods were studied from 90 km stretch of the Bombay Harbour-Thana Creek-Bassein Creek (BHTCBC) system for a period of 15 months. The larvae belonged to Penacidea, Caridea, Anomura and Brachyura. Among these, brachyurans were the most abundant in the entire study area indicating good potential for crab fishery. Penaeus, Metapenaeus and Parapenaeopsis were the genera recorded in the family Penaeidae of which Metapenaeus spp. were the most common. Generally there was a higher abundance of Penaeus and Metapenaeus during monsoon probably indicating intense breeding. A few genera of decapods showed patchy occurrence in this system. Results of this first investigation were quantitatively and qualitatively evaluated with comments on fishery potential of the commercially important groups of decapods.

Fibre optic distributed sensor system for condition monitoring of synthetic ropes

Reliability of the measuring devices is very important problem. Optical fibre sensors are very efficient. The use of optical fibre sensors for monitoring the physical and chemical parameters has been expanding over resent years. These sensors are applied for monitoring the structural integrity of long, parallel lay synthetic ropes. Such ropes are corrosion free, however, their operational lifetime under cyclic load is not well understood and premature failure can occur due to slippage and breakage of yarns within the rope. The monitoring system has been proposed which is based on acoustic detection of yarn breakage. Monitoring the strain and temperature is performed using the array of fibre gratings distributed along the rope length.

Physiological modelling for improved reliability in silhouette-driven gradient-based hand tracking

We present a gradient-based motion capture system that robustly tracks a human hand, based on abstracted visual information - silhouettes. Despite the ambiguity in the visual data and despite the vulnerability of gradient-based methods in the face of such ambiguity, we minimise problems related to misfit by using a model of the hand's physiology, which is entirely non-visual, subject-invariant, and assumed to be known a priori. By modelling seven distinct aspects of the hand's physiology we derive prior densities which are incorporated into the tracking system within a Bayesian framework. We demonstrate how the posterior is formed, and how our formulation leads to the extraction of the maximum a posteriori estimate using a gradient-based search. Our results demonstrate an enormous improvement in tracking precision and reliability, while also achieving near real-time performance. © 2009 IEEE.

Managing without measuring: A study of an electricity distribution company

Purpose: The purpose of this paper is to present an exception to the common belief "If you can't measure it, you can't manage it". It aims to show how in certain situations particular practices, attitudes and cultures can remove the need for individual performance measurement. Design/methodology/approach: First, the paper identifies the usual roles of performance measurement in managing individual employees as described by control and motivation theorists. Second, it identifies a market-leading organisation where managers deliberately refuse to use their top-level performance measurement system to manage the performance of individual employees. A case study is carried out to test what non-measurement mechanisms fulfil the roles of individual performance measurement in this organisation. Findings: Building on situations observed at this company, a set of possible characteristics of companies that do not require formalised individual performance measurement systems in order to achieve high performance standards is put forward. Practical implications: Managers should not always assume that individual performance measurement is the only way to achieve excellent performance. This study shows that, by granting responsibilities and providing appropriate support, managers can channel workers' enhanced motivation towards meeting wider organisational goals. Originality/value: This work broadens the understanding of how excellent performance can be achieved. It shows that excellence can be achieved through practices based on shared values linked to motivation, trust, and a common sense of mission, without the need to install individual performance measurement systems based on cybernetic principles. © Emerald Group Publishing Limited.

An experimental model of relay deployment planning tool for a wireless sensor network system to monitor civil engineering structures

It is essential to monitor deteriorated civil engineering structures cautiously to detect symptoms of their serious disruptions. A wireless sensor network can be an effective system for monitoring civil engineering structures. It is fast to deploy sensors especially in difficult-to-access areas, and it is extendable without any cable extensions. Since our target is to monitor deteriorations of civil engineering structures such as cracks at tunnel linings, most of the locations of sensors are known, and sensors are not required to move dynamically. Therefore, we focus on developing a deployment plan of a static network in order to reduce the value of a cost function such as initial installation cost and summation of communication distances of the network. The key issue of the deployment is the location of relays that forward sensing data from sensors to a data collection device called a gateway. In this paper, we propose a relay deployment-planning tool that can be used to design a wireless sensor network for monitoring civil engineering structures. For the planning tool, we formalize the model and implement a local search based algorithm to find a quasi-optimal solution. Our solution guarantees two routings from a sensor to a gateway, which can provide higher reliability of the network. We also show the application of our experimental tool to the actual environment in the London Underground.

Project neptune: Improved operation of water distribution networks

Water service providers (WSPs) in the UK have statutory obligations to supply drinking water to all customers that complies with increasingly stringent water quality regulations and minimum flow and pressure criteria. At the same time, the industry is required by regulators and investors to demonstrate increasing operational efficiency and to meet a wide range of performance criteria that are expected to improve year-on-year. Most WSPs have an ideal for improving the operation of their water supply systems based on increased knowledge and understanding of their assets and a shift to proactive management followed by steadily increasing degrees of system monitoring, automation and optimisation. The fundamental mission is, however, to ensure security of supply, with no interruptions and water quality of the highest standard at the tap. Unfortunately, advanced technologies required to fully understand, manage and automate water supply system operation either do not yet exist, are only partially evolved, or have not yet been reliably proven for live water distribution systems. It is this deficiency that the project NEPTUNE seeks to address by carrying out research into 3 main areas; these are: data and knowledge management; pressure management (including energy management); and the associated complex decision support systems on which to base interventions. The 3-year project started in April of 2007 and has already resulted in a number of research findings under the three main research priority areas (RPA). The paper summarises in greater detail the overall project objectives, the RPA activities and the areas of research innovation that are being undertaken in this major, UK collaborative study. Copyright 2009 ASCE.

Perspectives on the origin of microfilaments, microtubules, the relevant chaperonin system and cytoskeletal motors - a commentary on the spirochaete origin of flagella

The origin of cytoskeleton and the origin of relevant intracellular transportation system are big problems for understanding the emergence of eukaryotic cells. The present article summarized relevant information of evidences and molecular traces on the origin of actin, tubulin, the chaperonin system for folding them, myosins, kinesins, axonemal dyneins and cytoplasmic dyneins. On this basis the authors proposed a series of works, which should be done in the future, and indicated the ways for reaching the targets. These targets are mainly: 1) the reconstruction of evolutionary path from MreB protein of archaeal ancestor of eukaryotic cells to typical actin; 2) the finding of the MreB or MreB-related proteins in crenarchaea and using them to examine J. A. Lake's hypothesis on the origin of eukaryote from "eocytes" (crenarchaea); 3) the examinations of the existence and distribution of cytoskeleton made of MreB-related protein within coccoid archaea, especially in amoeboid archaeon Thermoplasm acidophilum; 4) using Thermoplasma as a model of archaeal ancestor of eukaryotic cells; 5) the searching for the homolog of ancestral dynein in present-day living archaea. During the writing of this article, Margulis' famous spirochaete hypothesis on the origin of flagella and cilia was unexpectedly involved and analyzed from aspects of tubulins, dyneins and spirochaetes. Actually, spirochaete cannot be reasonably assumed as the ectosymbiotic ancestor of eukaryotic flagella and cilia, since their swing depends upon large amount of bacterial flagella beneath the flexible outer wall, but not depends upon their intracellular tubules and the assumed dyneins. In this case, if they had "evolved" into cilia and lost their bacterial flagella, they would immediately become immobile! In fact, tubulin and dynein-like proteins have not been found in any spirochaete.

Distribution of drug resistant luminous bacteria in penaeid shrimp grow-out ponds

Distribution of luminous bacteria (LB) in penaeid shrimp grow-out pond water in semiintensive seawater farming system and their resistance to 15 antibacterials were investigated. Total viable counts and luminous bacterial counts in pond water ranged from 2.00xl03 to 1.35xl04/ml and l.OOxl01 to 8.00Xl02/ml, respectively. The percentage composition of LB in the total viable population increased significantly with period of culture. Five species of LB such as Vibrio fischeri, V. harveyi, V. orientalis, V. splendidus 1 and Photobacterium leiognathi were encountered. V. harveyi was the dominant species, constituting >80% of the total LB. Multiple antibiotic resistance was more common in these LB. Pond water isolates showed resistance to at least four antibacterial agents.

Boundary-layer suction system design for laminar-flying-wing aircraft

The present study aims to provide insight into the parameters affecting practical laminar-flow-control suction power requirements for a commercial laminar-flying-wing transport aircraft. It is shown that there is a minimum power requirement independent of the suction system design, associated with the stagnation pressure loss in the boundary layer. This requirement increases with aerofoil section thickness, but depends only weakly on Mach number and (for a thick, lightly loaded laminar flying wing) lift coefficient. Deviation from the optimal suction distribution, due to a practical chamber-based architecture, is found to have very little effect on the overall suction coefficient; hence, to a good approximation, the power penalty is given by the product of the optimal suction flow rate coefficient and the average skin pressure drop. In the spanwise direction, through suitable choice of chamber depth, the pressure drop due to frictional and inertial effects may be rendered negligible. Finally, if there are fewer pumps than chambers, the average pressure drop from the aerofoil surface to the pump collector ducts, rather than to the chambers, determines the power penalty. For the representative laminar-flying-wing aircraft parameters considered here, the minimum power associated with boundary-layer losses alone contributes some 80-90% of the total power requirement. © 2011 by the American Institute of Aeronautics and Astronautics, Inc.

Identification of biodiversity and distribution pattern of benthic Foraminifera and Ostracoda in continental shelf sediments of the Oman Sea

Biodiversity and distribution of benthic Foraminifera and Ostracoda in the continental shelf sediments of the Omman Sea was studied in order to indicating of the composition of benthic foraminiferal and ostracodal communities and determining of their relationship with the environmental factors of the Omman Sea. Sediment samples were gathered in winter 2006 from twelve stations ranging in depth from 30 to 103 meters. Environmental factors including depth, temperature, salinity, dissolved Oxygen and pH were measured with a CTD system during sampling time and grain size and total organic matter were measured in laboratory. From the overall 57 benthic foram species, there were 52 identified species belong to 25 genera of 16 families. The cosmopolitan foraminifer, Ammonia beccarii, was common in all sampling stations. The composition of benthic foram communities had a highly positive correlation with depth, salinity and total organic matter. From the overall 30 ostracod species, there were 26 identified species belong to 22 genera of 13 families. Diversity and aboundance of ostracoda of the Oman Sea decreased from east to west and from south to north but increased slightly in the northwest (near the Strait of Hormoz). Ostracoda of the genus Propontocypris were common in all sampling stations but the genera Cyprideis, Paradoxostom and Hemicytheridea were rare in the Oman Sea. Diversity and aboundance of ostracoda in northern regions were less than southern and were less than foraminifera too. The composition of ostracodal communities had a highly positive correlation with dept, salinity and grain size. Biodiversity and distribution pattern of benthic foraminifera and ostracoda were being different in various sampling stations, especially between northern and southern regions. Water depth, salinity and structure of the sediments were the most important abiotic factors controlling the distribution pattern of benthic foraminifera and ostracoda in the Omman Sea. None existence or rare observation of structural abnormalities and oil polluted individuals in the vicinity of all sampling stations, resulted to the "clean" benthic environment of the Omman Sea.

REPORT ON THE DISTRIBUTION, POPULATION, AND ECOLOGY OF THE YUNNAN SNUB-NOSED MONKEY (RHINOPITHECUS-BIETI)

The Yunnan snub-nosed monkey (Rhinopithecus bieti), an endangered species in China, has received more protection in theory than in practice. Therefore it is on the very verge of extinction. The population of the species was estimated less than 2,000 individuals spread in 19 distinct groups. It was confirmed that the monkey was confined to the Yunling Mountain System, the area between the Yangtze River (Changjiang, aka Jinshajiang) to the east and the Mekong River (Lancangjiang) to the west. We further concluded that a lowland belt to the east, about 100 km long and 20 - 30 km wide was not suitable habitat for the monkeys, and appeared to serve as the natural ecogeologic barrier for the species. Our results indicated that the southern limit of the distribution was at Longma (26-degrees 14'N), and that the northern limit of the distribution was at Xiaochangdu (29-degrees 20'N). The distribution area of the species was substantially smaller than previously estimated. There were substantial ecological differences between the southern and northern parts of the species range. The monkey was found only in fir-larch forest.

Response probability distribution of built-up vibro-acoustic systems

The vibro-acoustic response of built-up structures, consisting of stiff components with low modal density and flexible components with high modal density, is sensitive to small imperfections in the flexible components. In this paper, the uncertainty of the response is considered by modeling the low modal density master system as deterministic and the high modal density subsystems in a nonparametric stochastic way, i.e., carrying a diffuse wave field, and by subsequently computing the response probability density function. The master system's mean squared response amplitude follows a singular noncentral complex Wishart distribution conditional on the subsystem energies. For a single degree of freedom, this is equivalent to a chi-square or an exponential distribution, depending on the loading conditions. The subsystem energies follow approximately a chi-square distribution when their relative variance is smaller than unity. The results are validated by application to plate structures, and good agreement with Monte Carlo simulations is found. © 2012 Acoustical Society of America.

The influence of turbine stator well coolant flow rate and passage configuration on cooling effectiveness

Market competitiveness for aero engine power plant dictates that improvements in engine performance and reliability are guaranteed a priori by manufacturers. The requirement to accurately predict the life of engine components makes exacting demands of the internal air system, which must provide effective cooling over the engine duty cycle with the minimum consumption of compressor section air. Tests have been conducted at the University of Sussex using a turbine test facility which comprises a two stage turbine with an individual stage pressure ratio of 1.7:1. Main annulus air is supplied by an adapted Rolls-Royce Dart compressor at up to 440 K and 4.8 kg s-1. Cooling flow rates ranging from 0.71 to 1.46 Cw, ent, a disc entrainment parameter, have been used to allow ingress or egress dominated stator well flow conditions. The mechanical design of the test section allows internal cooling geometry to be rapidly re-configured, allowing the effect of jet momentum and coolant trajectory to be investigated. An important facet to this investigation is the use of CFD to model and analyse the flow structures associated with the cavity conditions tested, as well as to inform the design of cooling path geometry. This paper reports on the effectiveness of stator well coolant flow rate and delivery configurations using experimental data and also CFD analysis to better quantify the effect of stator well flow distribution on component temperatures. Copyright © 2011 by Rolls-Royce plc.

A preliminary study of target multiplicity for ADSRs

The Accelerator Driven Subcritical Reactor (ADSR) concept is based on the coupling of a particle accelerator to a subcritical reactor core by means of a neutron spallation target interface. This paper investigates the benefits of multiple spallation targets in ADSRs. The motivation behind this is, firstly, to improve the overall reliability of the accelerator-reactor system, and, secondly, to evaluate other potential advantages such as lower beam power requirements. The results show that a system containing two or three spallation targets, coupled to independent accelerators, offers better neutronic performance. This is demonstrated through the increased effective multiplication factor (keff) in the two- and three-target configurations and a more uniform neutron flux distribution. A multiple-target ADSR also proves effective in mitigating the impact of frequent beam interruptions, a pressing issue that needs to be addressed for the ADSR concept to advance. Assuming no simultaneous beam shutdowns, the two- and three-target configurations reduce the risk of fuel cladding failure due to thermal cyclic fatigue. © 2013 Elsevier B.V. All rights reserved.