Behavior of bulk melt-textured YBCO single domains subjected to crossed magnetic fields

We have experimentally investigated the crossed magnetic field effects on bulk melt-processed YBCO single domains. The samples were first permanently magnetized along their c-axis and then subjected to several cycles of a transverse magnetic field parallel to the ab planes. The magnetic properties along the c and ab directions were simultaneously measured using a couple of orthogonal pick-up coils as well as a Hall probe placed against the sample surface. The effects of both sweep amplitude and polarity were investigated. Field sweeps of alternate polarities are shown to affect the decay of the c-axis magnetization much more strongly than field sweeps of unique polarity do. However, the c-axis magnetization does not show any saturation even after a large number of field sweeps. Next, a micro-Hall probe scanning system was used to measure the distribution of magnetic induction over the top surface of the single domain subjected to the same combination of magnetic fields. The results are shown to be consistent with those determined with the sensing coils and bring out the role played by geometric effects.

Discrete dislocation plasticity analysis of crack-tip fields in polycrystalline materials

Small scale yielding around a mode I crack is analysed using polycrystalline discrete dislocation plasticity. Plane strain analyses are carried out with the dislocations all of edge character and modelled as line singularities in a linear elastic material. The lattice resistance to dislocation motion, nucleation, interaction with obstacles and annihilation are incorporated through a set of constitutive rules. Grain boundaries are modelled as impenetrable to dislocations. The polycrystalline material is taken to consist of two types of square grains, one of which has a bcc-like orientation and the other an fcc-like orientation. For both orientations there are three active slip systems. Alternating rows, alternating columns and a checker-board-like arrangement of the grains is used to construct the polycrystalline materials. Consistent with the increasing yield strength of the polycrystalline material with decreasing grain size, the calculations predict a decrease in both the plastic zone size and the crack-tip opening displacement for a given applied mode I stress intensity factor. Furthermore, slip-band and kink-band formation is inhibited by all grain arrangements and, with decreasing grain size, the stress and strain distributions more closely resemble the HRR fields with the crack-tip opening approximately inversely proportional to the yield strength of the polycrystalline materials. The calculations predict a reduction in fracture toughness with decreasing grain size associated with the grain boundaries acting as effective barriers to dislocation motion.

Investigation and comparison of inverter-fed induction machine loss

This paper presents an investigation into the losses in a three-phase induction motor under different pulse width modulation (PWM) excitation conditions. The impacts of Sinusoidal PWM, Space Vector PWM and Discontinuous PWM on machine loss are compared and studied. Finite element analysis simulations are employed to predict the machine losses with the loss breakdown analysis under different PWM schemes. Direct Calorimetric measurements are utilized to verify the finite element modeling and provide direct quantifications of machine loss under modern PWM techniques. © 2008 IEEE.

Growth and yield of GIFT (Oreochromis niloticus) and Thai silver barb (Barbodes gonionotus Bleeker) in rice fields and their effects on the yield of rice

(GIFT) (Oreochromis niloticus) and Silver barb (Barbodes gonionotus) in rice fields and their effects on the yield of rice was carried out in nine experimental rice plots. Three treatments viz., treatment-1 with 0. niloticus (T1), treatment-2 with B. gonionotus (T2) and treatment- 3 was kept as control (T3, without fish) were used in this study. Fertilizers such as, Urea (178 kg ha-1), T.S.P (125 kg ha-1) and M.P. (67 kg ha-1) were applied in each treatment. The fishes were stocked @ 6250 ha·1 and the experiment was continued for a period of 107 days. The values of water quality parameters such as, water temperature, dissolved oxygen, pH and chlorophyll-a were found within suitable level. Between the two species, higher specific growth rate was recorded in 0. niloticus than that of B. gonionotus. But B. gonionotus showed much higher survival (72%) than that of 0. niloticus (35%). Similar to survival, higher production (244 kg ha-1) and income (Tk. 6399 ha-1) were recorded in B. gonionotus than those of 0. niloticus (142.8 kg ha'1 and Tk. 2137 ha-1). Significant differences (p

Culture of Amblypharyngodon mola in rice fields alone and in combination with Barbodes gonionotus and Cyprinus carpio

A rice-fish culture experiment with four treatments viz., T 1 with Amblyphmyngadan mala alone, T 2 with A. mala and Barbodes gonionotus, T3 with A. mala and Cyprinis carpio and T4 as control (without fish) was carried out in the rice fields during April through August1999. The recovery rate of A. mala were 42%, 37% and 42% in treatments 1, 2 and 3 respectively and the same recorded for B. gonionotus and C. cmpio were 62% and 55% respectively. Among the three species of fish, B. gonionotus showed much higher recovery rate than both of A. mala and C. carpio. The production of A. nwla was 12.50 kg/ha/3 months in monoculture, and 7.92 kglha/3 months and 8.86 kglha/3 months in combination with B. gonionotus and C. carpio, respectively. The production of B. gonionotus in T2 was 169.29 kg/ha/3 months and C. cmpio in T 3 was 252.92 kg/ha/3 months. The total fish production was 12.50 kg/ha/3 months, 175.21 kg/ha/3 months and 261.88 kg/ha/3 months in Tp T2 and T3, respectively. The highest yields of rice grain (5.78 ton/ha) and straw (7.83 ton/ha) were recorded in T3 and the lowest of the same was in T4 (grain 4.96 ton/ha and straw 6.62 ton/ha). Rice yield increased by about 12.10% in T1, 13.30% in T2 and 16.33% in T3 in context to T4, rice-alone culture. The results demonstrated that the culture of fish in rice fields had profound beneficial impact on the production of rice grain and straw.

Methods of patterning magnetic fields using bulk superconductors

High Temperature superconductors are able to carry very high current densities, and thereby sustain very high magnetic fields. There are many projects which use the first property and these have concentrated on power generation, transmission and utilization, however there are relatively few which are currently exploiting the ability to sustain high magnetic fields. There are two main reasons for this: high field wound magnets can and have been made from both BSCCO and YBCO but currently their cost is much higher than the alternative provided by low Tc materials such as Nb3Sn and NbTi. An alternative form of the material is the bulk form which can be magnetized to high fields and using flux pumping this can be done in situ. This paper explores some of the applications of bulk superconductors and describes methods of producing field patterns using the highly uniform magnetic fields required for MRI and accelerator magnets as the frame of reference. The patterns are not limited to uniform fields and it is entirely possible to produce a field varying sinusoidally in space such as would be required for a motor or a generator. The scheme described in this paper describes a dipole magnet such as is found in an accelerator magnet. The tunnel is 30 × 50 × 1000 mm and we achieve a uniformity of better than 200 ppm over the 1000 mm length and better than 1 ppm over the central 500 mm region. The paper presents results for both the overall uniformity and the integrated uniformity which is 302 ppm over the 1000 mm length. © 2010 IEEE.

Application of the fixed point method for solution in time stepping finite element analysis using the inverse vector Jiles-Atherton model

An implementation of the inverse vector Jiles-Atherton model for the solution of non-linear hysteretic finite element problems is presented. The implementation applies the fixed point method with differential reluctivity values obtained from the Jiles-Atherton model. Differential reluctivities are usually computed using numerical differentiation, which is ill-posed and amplifies small perturbations causing large sudden increases or decreases of differential reluctivity values, which may cause numerical problems. A rule based algorithm for conditioning differential reluctivity values is presented. Unwanted perturbations on the computed differential reluctivity values are eliminated or reduced with the aim to guarantee convergence. Details of the algorithm are presented together with an evaluation of the algorithm by a numerical example. The algorithm is shown to guarantee convergence, although the rate of convergence depends on the choice of algorithm parameters. © 2011 IEEE.

In vitro construction of a recombinant human embryonic brain-derived neurotrophin-4 gene and pEGFP-N1 vector

BACKGROUND: Neurotrophin-4 (NT-4) can promote neuronal growth, development, differentiation, maturation, and survival. NT-4 can also improve recovery and regeneration of injured neurons, but cannot pass through the blood-brain barrier, which limits its ac

Effects of fish and prawn culture on physico-chemical parameters of water and rice yield in rice fields

An experiment was conducted with five treatments i.e. rice combined with fish having regular urea fertilization (T1), rice combined with prawn having regular urea fertilization (T2), rice combined with fish with supplementary feeding (T3), rice combined with prawn with supplementary feeding (T4) and without fish and prawn (T5) was kept as control. The dissolved oxygen values obtained in treatments with fish both in morning and afternoon were lower than the values of prawn containing treatments and control. The values of nitrate-N, ammonia-N, phosphate-P and chlorophyll-a were higher in fish containing treatments than the prawn containing treatments and control. Between the two fish containing treatments the higher gross (539.44 kg/ha) and net (440.14 kg/ha) yield were obtained in T3 with supplementary feeding and the lower gross (424.88 kg/ha) and net (314.32 kg/ha) yield were recorded in T1 without supplementary feeding. Again, between two prawn containing treatments the higher gross (108.69 kg/ha) and net (81.92 kg/ha) yield were obtained in T4 with supplementary feeding and lower gross (64.32 kg/ha) and net (30.98 kg/ha) yield were recorded in T2 without supplementary feeding. The highest yield of rice grain (3.45 mt/ha) and straw (6.37 mt/ha) were obtained in T1 with fish having urea fertilization without feeding.

Age-related effects of bilateral frontal eye fields lesions on rapid eye movements during REM sleep in rhesus monkeys

Rapid eye movement (REM) is one of the most characteristic features of REM sleep, but the mechanisms underlying its regulation remain unclear. The present study aims to investigate whether the frontal eye field (FEF) is involved in the regulation of the r