The effects of transformational leadership behaviours on follower outcomes:an identity-based analysis

The aim of this study was to explore two of the mechanisms by which transformational leaders have a positive influence on followers. It examined the mediating role of follower's leader and group identification on the associations among different transformational leader behaviours and follower job satisfaction and supervisor-rated job performance. One hundred and seventy-nine healthcare employees and 44 supervisors participated in the study. The results from multilevel structural equation modelling provided results that partially supported the predicted model. Identification with the leader significantly mediated the positive associations between supportive leadership, intellectual stimulation, personal recognition, in the prediction of job satisfaction and job performance. Leader identification also mediated the relationship between supportive leadership, intellectual stimulation, personal recognition, and group identification. However, group identification did not mediate the associations between vision leadership and inspirational communication, in the prediction of job satisfaction and job performance. The results highlight the role of individualized forms of leadership and leader identification in enhancing follower outcomes.

Genotypic and antimicrobial characterisation of Propionibacterium acnes isolates from surgically excised lumbar disc herniations

The anaerobic skin commensal Propionibacterium acnes is an underestimated cause of human infections and clinical conditions. Previous studies have suggested a role for the bacterium in lumbar disc herniation and infection. To further investigate this, five biopsy samples were surgically excised from each of 64 patients with lumbar disc herniation. P. acnes and other bacteria were detected by anaerobic culture, followed by biochemical and PCR-based identification. In total, 24/64 (38%) patients had evidence of P. acnes in their excised herniated disc tissue. Using recA and mAb typing methods, 52% of the isolates were type II (50% of culture-positive patients), while type IA strains accounted for 28% of isolates (42% patients). Type III (11% isolates; 21% patients) and type IB strains (9% isolates; 17% patients) were detected less frequently. The MIC values for all isolates were lowest for amoxicillin, ciprofloxacin, erythromycin, rifampicin, tetracycline, and vancomycin (≤1mg/L). The MIC for fusidic acid was 1-2 mg/L. The MIC for trimethoprim and gentamicin was 2 to ≥4 mg/L. The demonstration that type II and III strains, which are not frequently recovered from skin, predominated within our isolate collection (63%) suggests that the role of P. acnes in lumbar disc herniation should not be readily dismissed. © 2013 Jess Rollason et al.

A strategic activity model of Enterprise System implementation and use:scaffolding fluidity

This paper builds on a Strategic Activity Framework (Jarzabkowski, 2005) and activity based theories of development (Vygotsky, 1978) to model how Enterprise Systems are used to support emerging strategy. It makes three contributions. Firstly, it links fluidity and extensiveness of system use to patterns of strategising. Fluidity - the ability to change system use as needs change - is supported by interactive strategising, where top managers communicate directly with the organisation. Extensiveness requires procedural strategising, embedding system use in structures and routines. Secondly, it relates interactive and procedural strategising to the importance of the system - procedural strategising is more likely to occur if the system is strategically important. Thirdly, using a scaffolding metaphor it identifies patterns in the activities of top managers and Enterprise System custodians, who identify process champions within the organisational community, orient them towards system goals, provide guided support, and encourage fluidity through pacing implementation with learning.© 2013 Published by Elsevier B.V. All rights reserved.

Entrepreneurial intention and entrepreneurial behaviour:a social psychological perspective

Increasing the supply of entrepreneurs reduces unemployment and accelerates economic growth (Acs, 2006; Audretsch, 2007; Santarelli et el. 2009; Campbell, 1996; Carree & Thurik, 1996). The supply of entrepreneurs depends on the entrepreneurial intention and activity of the people (Kruger & Brazeal, 1994). Existing behavioural theories explain that entrepreneurial activity is an attitude driven process which is mediated by intention and regulated by behavioural control. These theories are: Theory of Planned Behaviour (Ajzen, 1991; 2002, 2012); Entrepreneurial Event Model (Shapiro & Shokol, 1982), and Social Cognitive Theory (Bandura, 1977; 1986; 2012). Meta-analysis of existing behavioural theories in different fields found that the theories are more effective to analyse behavioural intention and habitual behaviour, but less effective to analyse long-term and risky behaviour (McEachan et al., 2011). The objective of this dissertation is to improve entrepreneurship behaviour theory to advance our understanding of the determinants of the entrepreneurial intention and activity. To achieve this objective we asked three compelling questions in our research. These are: Firstly, why do differences exist in entrepreneurship among age groups. Secondly, how can we improve the theory to analyse entrepreneurial intention and behaviour? And, thirdly, is there any relationship between counterfactual or regretful thinking and entrepreneurial intention? We address these three questions in Chapters 2, 3 and 4 of the dissertation. Earlier studies have identified that there is an inverse U shaped relationship between age and entrepreneurship (Parker, 2004; Hart et al., 2004). In our study, we explain the reasons for this inverse U shape (Chapter 2). To analyse the reasons we use Cognitive Life Cycle theory and Disuse theory. We assume that the stage in the life cycle of an individual moderates the influence of opportunity identification and skill to start a business. In our study, we analyse the moderation effect in early stage entrepreneurship and in serial entrepreneurship. In Chapter 3, the limitations of existing psychological theories are discussed, and a competency value theory of entrepreneurship (CVTE) is proposed to overcome the limitations and extend existing theories. We use a ‘weighted competency’ variable instead of a ‘perceived behavioural control’ variable for the theory of planned behaviour (TPB) and self-efficacy variable for social cognitive theory. Weighted competency is the perceived competency ranking assigned by an individual for his total competencies to be an entrepreneur. The proposed theory was tested in a pilot survey in the UK and in a national adult population survey in a South Asian Country. The results show a significant relationship between competencies and entrepreneurial intention, and weighted competencies and entrepreneurial behaviour as per CVTE. To improve the theory further, in Chapter 4, we test the relationship between counterfactual thinking and entrepreneurial intention. Studies in cognitive psychology identify that ‘upward counterfactual thinking’ influences intention and behaviour (Epstude & Rose, 2008; Smallman & Roese, 2009). Upward counterfactual thinking is regretful thinking for missed opportunities of a problem. This study addresses the question of how an individual’s regretful thinking affects his or her future entrepreneurial career intention. To do so, we conducted a study among students in a business school in the UK, and we found that counterfactual thinking modifies the influence of attitude and opportunity identification in entrepreneurial career intention.

Increasing the fracture toughness of silicon by ion implantation

Previous studies have shown that moderate doses of radiation can lead to increased fracture toughness in ceramics. An experimental investigation was conducted to determine the effects of ion implantation on fracture toughness in silicon. Specimens implanted with Ne showed increased fracture toughness, over the entire range of implantations tested. Using ions of various energies to better distribute implantation damage further increased the fracture toughness even though the region of amorphous damage was slightly decreased. The implantation damage accumulated in a predictable manner so that fracture toughness could be optimized.

Resolving ambiguous descriptions through visual information

The project “Reference in Discourse” deals with the selection of a specific object from a visual scene in a natural language situation. The goal of this research is to explain this everyday discourse reference task in terms of a concept generation process based on subconceptual visual and verbal information. The system OINC (Object Identification in Natural Communicators) aims at solving this problem in a psychologically adequate way. The system’s difficulties occurring with incomplete and deviant descriptions correspond to the data from experiments with human subjects. The results of these experiments are reported.

On a Direct Approach to the Solution of Inverse Optical Problems

The evaluation from experimental data, of physical quantities, which enter into the electromagnetic Maxwell equations, is described as inverse optical problem. The functional relations between the dependent and independent variables are of transcendental character and numeric procedures for evaluation of the unknowns are largely used. Herein, we discuss a direct approach to the solution, illustrated by a specific example of determination of thin films optical constants from spectrophotometric data. New algorithm is proposed for the parameters evaluation, which does not need an initial guess of the unknowns and does not use iterative procedures. Thus we overcome the intrinsic deficiency of minimization techniques, such as gradient search methods, Simplex methods, etc. The price of it is a need of more computing power, but our algorithm is easily implemented in structures such as grid clusters. We show the advantages of this approach and its potential for generalization to other inverse optical problems.

Does expert psychological testimony improve juror sensitivity to lineup suggestiveness?

Previous research has examined the validity of behavioral assumptions underlying the presumed effectiveness of safeguards against erroneous conviction resulting from mistaken eyewitness identification. In keeping with this agenda, this study examined juror sensitivity to lineup suggestiveness in the form of foil, instruction, and presentation biases and whether expert psychological testimony further sensitizes jurors to the factors that influence the likelihood of false identifications. One hundred and sixty jury eligible citizens watched versions of a videotaped trial that included information about the identification of the defendant by an eyewitness and that varied the suggestiveness of the eyewitness identification procedure. In addition, half of the mock-jurors heard the testimony of an expert psychologist regarding the factors that influence lineup suggestiveness. Mock-jurors rendered individual verdicts, rated the defendant's culpability and the suggestiveness and fairness of the identification procedure. Results indicated that jurors are somewhat sensitive to foil bias but are insensitive to instruction and presentation biases. No evidence was found to suggest that expert testimony leads to juror skepticism or juror sensitization. These results question the effectiveness of cross-examination and expert testimony as safeguards against erroneous convictions resulting from mistaken identification. ^

Eyewitness decision -making with showups: Probative or perilous?

Showups are a technique of eyewitness identification in which a single suspect is presented to a witness for identification. Showups are controversial. Defense attorneys argue that they are suggestive and place suspects at undue risk of false identification. Prosecutors and police officers argue that showups are an indispensable investigative tool and are no more suggestive than other identification techniques. Are showups probative or perilous? If so, what can be done to improve their accuracy? This investigation converged on this question by addressing three interrelated goals. The first was to examine the effect of two system variables, retention interval and suspect clothing, on showup accuracy. The second was to determine if showups are more suggestive than lineups. The third goal was to explore carryover effects from showups to subsequent lineup identifications. ^ Eyewitness performance was evaluated with the Eyewitness Identification Paradigm. Approximately 500 undergraduate students at FIU witnesses a staged event (i.e., a "crime") in their classrooms and subsequently participated in a showup and/or lineup identification test. Half of the identification tests contained the target (i.e., the "perpetrator") and half contained a target-substitute (i.e., an "innocent suspect"). ^ The results of this study indicated that, overall, showups are not unusually prejudicial and are no more suggestive than lineups. However this study identified two specific conditions under which showups are likely to lead to false identifications of an innocent suspect. First, false identification are likely to occur in showups that are conducted shortly after a crime when the suspect is wearing clothing similar to that worn by the perpetrator. Second, placing an innocent suspect in both a showup and then a lineup substantially increases the chances that the suspect will be falsely identified in the lineup. The implications of these findings for the conduct of eyewitness investigations are discussed. ^

Desenvolvimento de estruturas integradas de filtros e antenas para aplicações em sistemas de comunicações sem fio

This paper presents a study of the integration of filters and microstrip antennas, yielding devices named as filtennas for applications in wireless communications systems. The design of these structures is given from the observation of filtennas based integration between horn antennas and frequency selective surfaces (FSS), used in the band X. The choice of microstrip line structures for the development of a new configuration filtennas justifies the wide application of these transmission lines, in recent decades, always resulting in the production of circuit structures with planar light-weight, compact size, low cost, easy to construct and particularly easy to integrate with other microwave circuits. In addition, the antenna structure considered for the composition of filtennas consists of a planar monopole microstrip to microstrip filters integrated in the feed line of the antenna. In particular, are considered elliptical monopole microstrip (operating in UWB UWB) microstrip filters and (in structures with associated sections in series and / or coupled). In addition, the monopole microstrip has a proper bandwidth and omnidirectional radiation pattern, such that its integration with microstrip filters results in decreased bandwidth, but with slight changes in the radiation pattern. The methods used in the analysis of monopoles, and filters were filtennas finite elements and moments by using commercial software Ansoft Designer and HFSS Ansoft, respectively. Specifically, we analyze the main characteristics of filtennas, such as radiation pattern, gain and bandwidth. Were designed, constructed and measures, several structures filtennas, for validation of the simulated results. Were also used computational tools (CAD) in the process of building prototypes of planar monopoles, filters and filtennas. The prototypes were constructed on substrates of glass-fiber (FR4). Measurements were performed at the Laboratory for Telecommunications UFRN. Comparisons were made between simulated and measured, and found good agreement in the cases considered

Avaliação da usabilidade e da arquitetura da informação do site do Instituto do Cérebro da UFRN: um estudo de caso com base nas opiniões dos usuários da instituição

The objective of the current piece of research presents was draw up a list of recommendations for the site of the Instituto do Cérebro da Universidade Federal do Rio Grande do Norte, with an emphasis on fault identification in usability and information architecture, through the application of design techniques with users of the institution. From the use of the following techniques: Cardsorting, applied to a group of six people as target public, such as professor, administrative technicians and graduate student of the institution; Interviews, carried out with the director of the Instituto do Cérebro, secretaries of the undergraduate and graduate courses; Cooperative Evaluation applied in two ways: in group and individually. The evaluation in group was fulfilled in four sessions that occurred with a group composed of six people who are part of the technical staff of the Instituto do Cérebro. In the Individual Cooperative Evaluation, eight users (graduate students and administrative technicians of the Instituto do Cérebro da UFRN) performed tasks which are frequently fulfilled by users from the public target in the site of the Instituto do Cérebro. After each session of the Individual Cooperative Evaluation, a questionnaire of the user´s satisfaction was used about his or her perception in regard to the site usability and utility of the mentioned institute site. Therefore, it was concluded that, by means of the analysis of the results and the triangulation of the obtained data in each one of the techniques applied with the users, in the present piece of research, problems were verified, among others; all related to the unsuitable use of the interface elements, navigation, labeling of some menu terms, and still, the lack of search space and integration with the social networks – besides the lack, positioning and inappropriate formatting of information that would be of high relevance to the users. Finally, a list of recommendations is presented and this can be used in a future interface redesign with the goal to improve the information architecture and the usability of the site of the Instituto do Cérebro da Universidade Federal do Rio Grande do Norte.

Avaliação do cuidado de enfermagem na perspectiva da segurança do paciente em unidades de terapia intensiva: na visão de profissionais, pacientes e familiares

Technological advances combined with healthcare assistance bring increased risks related to patient safety, causing health institutions to be environments susceptible to losses in the provided care. Sectors of high complexity, such as Intensive Care Units have such characteristics highlighted due to being spaces designed for the care of patients in serious medical condition, when the use of advanced technological devices becomes a necessity. Thus, the aim of this study was to assess nursing care from the perspective of patient safety in intensive care units. This is an evaluative research, which combines various forms of data collection and analysis in order to conduct a deepened investigation. Data collection occurred in loco, from April to July 2014 in hospitals equipped with adult intensive care unit services. For this, a checklist instrument and semi-structured interviews conducted with patients, families, professionals were used in order to evaluate the structure-process-outcome triad. The instrument for nursing care assessment regarding Patient Safety included 97 questions related to structure and processes. Interviews provided data for outcome analysis. The selection of interviewees/participants was based on the willingness of potential participants. The following methods were used to collect data resulting from the instrument: statistical analysis of inter-rater reliability measure known as kappa (K); observations from judges resulting from the observation process; and added information obtained from the literature on the thematic. Data analysis from the interviews was carried out with IRAMUTEQ software, which used Descending Hierarchical Classification and Similarity analysis to aid in data interpretation. Research steps followed the ethical principles presented by Resolution No. 466 of December 12, 2012, and the results were presented in three manuscripts: 1) Evaluation of patient safety in Intensive Care Units: a focus on structure; 2) Health evaluation processes: a nursing care perspective on patient safety; 3) Patient safety in intensive care units: perception of nurses, family members and patients. The first article, related to the structure, refers to the use of 24 items of the employed instrument, showing that most of the findings were not aligned with the adequacy standards, which indicates poor conditions in structures offered in health services. The second article provides an analysis of the pillar of Processes, with the use of 73 items of the instrument, showing that 50 items did not meet the required standards for safe handling due to the absence of adequate scientific guidance and effective communication in nursing care process. For the third article, results indicate that intensive care units were safe places, yet urges for changes, especially in the physical structure and availability of materials and communication among professionals, patients and families. Therefore, our findings suggest that the nursing care being provided in the evaluated intensive care units contains troubling shortcomings with regards to patient safety, thereby evidencing an insecure setting for the assistance offered, in addition to a need for urgent measures to remedy the identified inadequacies with appropriate structures and implement protocols and care guidelines in order to consolidate an environment more favorable to patient safety.

Gut content, fatty acid composition and metabolic rates of the amphipod Anonyx sarsi during POLARSTERN cruise ARK-XIX/1, ice station PS64/070-6

During a winter expedition to the western Barents Sea in March 2003, benthic amphipods of the species Anonyx sarsi were observed directly below pack ice. Only males and juveniles [16.0-37.0 mm long, 16.2-120.8 mg dry mass (DM)] were collected. Guts contained macroalgal fibres, fish eggs and flesh from large carrion. Amphipods had very low levels of total lipids (2.7-17.2% DM). Analysis of lipid biomarkers showed that some of the specimens had preyed on pelagic copepods. Individual respiration rates ranged over 0.4-1.7 ml O2/day (mean: 1.2 ml, SD: 0.5 ml). Individual ammonia excretion rates varied between 7.8 µg and 49.3 µg N/day (mean: 30.7 µg, SD: 15.2 µg). The atomic O:N ratio ranged over 35 to 71 (mean: 55, SD: 14), indicating lipid-dominated metabolism. Mass-specific respiration ranged over 9.8-16.6 ml O2/day/g DM (mean: 13.1 ml, SD: 2.2 ml). The metabolic rates of A. sarsi were twice as high as those of the truly sympagic amphipod Gammarus wilkitzkii, which is better adapted to the under-ice habitat by its energy-saving attached lifestyle. It is concluded that males and juveniles of A. sarsi were actively searching for food in the water column and at the ice underside, but that the nutritional status of the amphipods in late Arctic winter was generally very poor.

Application of Numerical Methods to Study Arrangement and Fracture of Lithium-Ion Microstructure

The focus of this work is to develop and employ numerical methods that provide characterization of granular microstructures, dynamic fragmentation of brittle materials, and dynamic fracture of three-dimensional bodies.

We first propose the fabric tensor formalism to describe the structure and evolution of lithium-ion electrode microstructure during the calendaring process. Fabric tensors are directional measures of particulate assemblies based on inter-particle connectivity, relating to the structural and transport properties of the electrode. Applying this technique to X-ray computed tomography of cathode microstructure, we show that fabric tensors capture the evolution of the inter-particle contact distribution and are therefore good measures for the internal state of and electronic transport within the electrode.

We then shift focus to the development and analysis of fracture models within finite element simulations. A difficult problem to characterize in the realm of fracture modeling is that of fragmentation, wherein brittle materials subjected to a uniform tensile loading break apart into a large number of smaller pieces. We explore the effect of numerical precision in the results of dynamic fragmentation simulations using the cohesive element approach on a one-dimensional domain. By introducing random and non-random field variations, we discern that round-off error plays a significant role in establishing a mesh-convergent solution for uniform fragmentation problems. Further, by using differing magnitudes of randomized material properties and mesh discretizations, we find that employing randomness can improve convergence behavior and provide a computational savings.

The Thick Level-Set model is implemented to describe brittle media undergoing dynamic fragmentation as an alternative to the cohesive element approach. This non-local damage model features a level-set function that defines the extent and severity of degradation and uses a length scale to limit the damage gradient. In terms of energy dissipated by fracture and mean fragment size, we find that the proposed model reproduces the rate-dependent observations of analytical approaches, cohesive element simulations, and experimental studies.

Lastly, the Thick Level-Set model is implemented in three dimensions to describe the dynamic failure of brittle media, such as the active material particles in the battery cathode during manufacturing. The proposed model matches expected behavior from physical experiments, analytical approaches, and numerical models, and mesh convergence is established. We find that the use of an asymmetrical damage model to represent tensile damage is important to producing the expected results for brittle fracture problems.

The impact of this work is that designers of lithium-ion battery components can employ the numerical methods presented herein to analyze the evolving electrode microstructure during manufacturing, operational, and extraordinary loadings. This allows for enhanced designs and manufacturing methods that advance the state of battery technology. Further, these numerical tools have applicability in a broad range of fields, from geotechnical analysis to ice-sheet modeling to armor design to hydraulic fracturing.

Avaliação da viabilidade da aplicação de técnicas biomoleculares na autenticação de produtos alimentares

A carne continua a ser a fonte proteica mais comum no quotidiano das pessoas. Além disso, os produtos cárneos processados apresentam-se como uma mais-valia nas suas vidas agitadas. Este tipo de produto torna difícil a diferenciação das carnes utilizadas na sua confecção, sendo por isso propícios a adulteração. A Reacção em Cadeia da Polimerase (PCR) tem ganho cada vez mais importância nos laboratórios de biologia molecular, revelando-se uma técnica de análise rápida, sensível e altamente específica na identificação de espécies em produtos alimentares. No entanto, vários factores podem interferir com o processo de amplificação, pelo que alguns cuidados devem ser implementados desde a aquisição da amostra a analisar, ao seu acondicionamento e posterior extração de ADN. Existem inúmeros protocolos de extração de ADN, devendo para cada estudo avaliar-se e optar-se pelo mais adequado, considerando a finalidade estabelecida para a amostra extraída. O trabalho laboratorial apresentado nesta dissertação baseou-se em três etapas principais. Inicialmente, avaliaram-se diferentes protocolos de extração de ADN, utilizando-se amostras de carne adquiridas num talho. Entre os protocolos testados, o método de Brometo de Cetil-Trimetil-Amónio (CTAB) modificado foi o que permitiu obter amostras de ADN com maior concentração e elevado nível de pureza. Posteriormente, foram testados e optimizados diferentes protocolos de amplificação, por PCR em tempo real, para a detecção das espécies Bos taurus (vaca), Sus scrofa (porco), Equus caballus (cavalo) e Ovis aries (ovelha). Foram empregues primers específicos de espécie para a detecção de genes mitocondriais e genómicos, consoante cada protocolo. Para o caso concreto do porco, foi efectuada a avaliação de dois protocolos, singleplex com EvaGreen® e tetraplex com AllHorse, para possível aplicação dos mesmos na sua quantificação. Os resultados demonstraram elevada especificidade e sensibilidade das reacções para esta espécie, permitindo a sua detecção até um limite de 0,001 ng e 0,1%, respectivamente. Somente a primeira metodologia se mostrou adequada para quantificação. Por último, as metodologias sugeridas foram aplicadas com sucesso na análise de 4 amostras comerciais de hambúrgueres, tendo-se verificado a consistência da rotulagem em todos os casos, no que concerne a composição em termos de espécies animais. O interesse de trabalhos neste âmbito recai na importância da autenticidade dos rótulos de produtos alimentares, principalmente nos produtos cárneos, para segurança dos consumidores e salvaguarda dos produtores.