Comparison-speed liquid jets

The performance of a small high-speed liquid jet apparatus is described. Water jets with velocities from 200 to 700 m/s were obtained by firing a deformable lead slug from an air rifle into a stainless steel nozzle containing water sealed with a rubber diaphragm. Nozzle devices using the impact extrusion (IE) and cumulation (CU) methods were designed to generate the jets. The effect of the nozzle diameter and the downstream distance on the jet velocity is examined. The injection sequences are visualized using both shadowgraphy and schlieren photography. The difference between the IE and CU methods of jet generation is found.

Comparison of relative flexoelectric coefficients measured by different techniques

While it is well known that it is possible to determine the effective flexoelectric coefficient of nematic liquid crystals using hybrid cells [1], this technique can be difficult due to the necessity of using a D.C. field. We have used a second method[2], requiring an A.C. field, to determine this parameter and here we compare the two techniques. The A.C. method employs the linear flexoelectrically induced linear electro-optic switching mechanism observed in chiral nematics. In order to use this second technique a chiral nematic phase is induced in an achiral nematic by the addition of a small amount of chiral additive (∼3% concentration w/w) to give helix pitch lengths of typically 0.5-1.0 μm. We note that the two methods can be used interchangeably, since they produce similar results, and we conclude with a discussion of their relative merits.

Comparison between weight loss of bends in a pneumatic conveyor and erosion rate obtained in a centrifugal erosion tester for the same materials

In order to find a link between results obtained from a laboratory erosion tester and tests carried out on a pneumatic conveyor, a comparison has been made between weight loss from bends on an industrial-scale pneumatic conveyor and erosion rates obtained in a small centrifugal erosion tester, for the same materials. Identical test conditions have been applied to both experiments so that comparable test results have been obtained. The erosion rate of mild steel commonly used as the wall material of conveyor pipes and pipe bends was determined individually on both test rigs. A relationship between weight loss from the bends and erosion rate determined from the tester has been developed. A discussion based on the results and their applicability to the prediction of wear in pneumatic conveyors concludes the paper. © 2004 Elsevier B.V. All rights reserved.

A comparison of winter pre-heating requirements for natural displacement and natural mixing ventilation

In winter, natural ventilation can be achieved either through mixing ventilation or upward displacement ventilation (P.F. Linden, The fluid mechanics of natural ventilation, Annual Review of Fluid Mechanics 31 (1999) pp. 201-238). We show there is a significant energy saving possible by using mixing ventilation, in the case that the internal heat gains are significant, and illustrate these savings using an idealized model, which predicts that with internal heat gains of order 0.1 kW per person, mixing ventilation uses of a fraction of order 0.2-0.4 of the heat load of displacement ventilation assuming a well-insulated building. We then describe a strategy for such mixing natural ventilation in an atrium style building in which the rooms surrounding the atrium are able to vent directly to the exterior and also through the atrium to the exterior. The results are motivated by the desire to reduce the energy burden in large public buildings such as hospitals, schools or office buildings centred on atria. We illustrate a strategy for the natural mixing ventilation in order that the rooms surrounding the atrium receive both pre-heated but also sufficiently fresh air, while the central atrium zone remains warm. We test the principles with some laboratory experiments in which a model air chamber is ventilated using both mixing and displacement ventilation, and compare the energy loads in each case. We conclude with a discussion of the potential applications of the approach within the context of open plan atria type office buildings.

Los medios como formadores de la imagen de los políticos

Resumen: Cuando los medios se refieren a los candidatos políticos en una situación de campaña electoral proyectan una cierta imagen de los mismos a partir de las verbalizaciones que preponderan en los mensajes informativos. El presente trabajo analiza estas verbalizaciones de los medios en el marco de la teoría de la Agenda Setting, más específicamente en el segundo nivel de esta teoría, la cual hace referencia a los atributos o aspectos que caracterizan a los protagonistas de las noticias, para este estudio en particular, los políticos. Esta teoría fue puesta a prueba repetidamente desde su aplicación en las elecciones estadounidenses de 1968 de la mano de sus autores Maxwell McCombs y Donald Shaw. La misma se ha extendido con paso firme desde su país de origen hacia otras latitudes. El objetivo general es describir la imagen de los candidatos presidenciales a partir de las expresiones que preponderan en los medios masivos de comunicación, durante la campaña presidencial en Argentina ocurrida en octubre de 2011. El procedimiento consiste en el relevamiento realizado durante los meses anteriores a las elecciones presidenciales. Para ello fue necesario armar un corpus compuesto por la selección de los medios masivos de comunicación a analizar. Seguidamente se realiza el análisis de contenido del corpus y se procede al análisis de los datos, de ello deriva una base de datos, donde la unidad de análisis fue la mención de los diversos aspectos o características de los candidatos políticos. Los aspectos o características fueron tomados de investigaciones anteriores que aplicaron la misma metodología y que fueron realizadas en nuestro país también en situaciones de contextos electorales. Por ello es factible de efectuar comparaciones en el tiempo, ya que una de las enormes riquezas de la teoría de la Agenda Setting es la de ser susceptible de comparación por tratarse de una metodología de análisis sistemático. La revisión de la teoría de la Agenda Setting que enmarca esta investigación pretende introducirnos primeramente en las investigaciones de medios masivos en general para luego focalizar en la teoría propiamente dicha y más aún en el segundo nivel de la teoría que trata de los atributos de los personajes públicos Se realiza posteriormente una breve sinopsis de investigaciones en Latinoamérica y Argentina, sobre temas relacionados con campañas electorales y no electorales para finalmente de manera concatenada dar cuenta de trabajos realizados en nuestro país en situaciones de campañas políticas

Curvature and wrinkling of premixed flame Kernels comparison between planar laser induced fluorescence (PLIF) and 3D direct numerical simulations (DNS)

A direct comparison between time resolved PLIF measurements of OH and two dimensional slices from a full three dimensional DNS data set of turbulent premixed flame kernels in lean methane/air mixture was presented. The local flame structure and the degree of flame wrinkling were examined in response to differing turbulence intensities and turbulent Reynolds numbers. Simulations were performed using the SEGA DNS code, which is based on the solution of the compressible Navier Stokes, species, and energy equations for a lean hydrocarbon mixture. For the OH PLIF measurements, a cluster of four Nd:YAG laser was fired sequentially at high repetition rates and used to pump a dye laser. The frequency doubled laser beam was formed into a sheet of 40 mm height using a cylindrical telescope. The combination of PLIF and DNS has been demonstrated as a powerful tool for flame analysis. This research will form the basis for the development of sub-grid-scale (SGS) models for LES of lean-premixed combustion systems such as gas turbines. This is an abstract of a paper presented at the 30th International Symposium on Combustion (Chicago, IL 7/25-30/2004).

Comparison of constructions of irregular Gallager codes

The low-density parity check codes whose performance is closest to the Shannon limit are `Gallager codes' based on irregular graphs. We compare alternative methods for constructing these graphs and present two results. First, we find a `super-Poisson' construction which gives a small improvement in empirical performance over a random construction. Second, whereas Gallager codes normally take N2 time to encode, we investigate constructions of regular and irregular Gallager codes that allow more rapid encoding and have smaller memory requirements in the encoder. We find that these `fast encoding' Gallager codes have equally good performance.

Aplicación e instrumentalización de la doctrina de seguridad nacional en Colombia (1978- 1982) : efectos en materia de derechos humanos

Los estudios sobre seguridad en Colombia han incorporado en sus análisis las implicaciones políticas que la seguridad tiene para la consolidación de la democracia, la ciudadanía, la memoria, la verdad o los Derechos Humanos. Por esta razón, este artículo analiza la primera política estatal sobre seguridad que se implementó entre 1978 a 1982, conocida como el Estatuto de Seguridad y los efectos que tuvo en la institucionalización de la protección y defensa de los Derechos Humanos. El texto esta dividido en tres partes: La primera parte, analiza la instrumentalización del Estatuto a través de las relaciones cívico-militares, la ideologización y la ocupación y administración de las instituciones; la segunda parte, los alcances del Estatuto respecto a las violaciones de los derechos fundamentales y de los procedimientos legales, así como un intento por ver este fenómeno a través de la dinámica campo-ciudad. La última parte, explica el desmantelamiento del Estatuto en las postrimerías del gobierno en 1982.

Comparison Of Shear Banding In Bmgs Due To Thermal-Softening And Free Volume Creation

This paper reports a comparative study of shear banding in BMGs resulting from thermal softening and free volume creation. Firstly, the effects of thermal softening and free volume creation on shear instability are discussed. It is known that thermal softening governs thermal shear banding, hence it is essentially energy related. However, compound free volume creation is the key factor to the other instability, though void-induced softening seems to be the counterpart of thermal softening. So, the driving force for shear instability owing to free volume creation is very different from the thermally assisted one. In particular, long wave perturbations are always unstable owing to compound free volume creation. Therefore, the shear instability resulting from coupled compound free volume creation and thermal softening may start more like that due to free volume creation. Also, the compound free volume creation implies a specific and intrinsic characteristic growth time of shear instability. Finally, the mature shear band width is governed by the corresponding diffusions (thermal or void diffusion) within the band. As a rough guide, the dimensionless numbers: Thermal softening related number B, Deborah number (denoting the relation of instability growth rate owing to compound free volume and loading time) and Lewis number (denoting the competition of different diffusions) show us their relative importance of thermal softening and free volume creation in shear banding. All these results are of particular significance in understanding the mechanism of shear banding in bulk metallic glasses (BMGs).

Comparison Between Lurr And State Vector Analysis Before Strong Earthquakes In Southern California Since 1980

There are seven strong earthquakes with M >= 6.5 that occurred in southern California during the period from 1980 to 2005. In this paper, these earthquakes were studied by the LURR (Load/Unload Response Ratio) method and the State Vector method to detect if there are anomalies before them. The results show that LURR anomalies appeared before 6 earthquakes out of 7 and State Vector anomalies appeared before all 7 earthquakes. For the LURR method, the interval between maximum LURR value and the forthcoming earthquake is 1 to 19 months, and the dominant mean interval is about 10.7 months. For the State Vector method, the interval between the maximum modulus of increment State Vector and the forthcoming earthquake is from 3 to 27 months, but the dominant mean interval between the occurrence time of the maximum State Vector anomaly and the forthcoming earthquake is about 4.7 months. The results also show that the minimum valid space window scale for the LURR and the State Vector is a circle with a radius of 100 km and a square of 3 degrees 3 degrees, respectively. These results imply that the State Vector method is more effective for short-term earthquake prediction than the LURR method, however the LURR method is more effective for location prediction than the State Vector method.