Evaluation of standard reagents for radial-immunodiffusion assays. In vitro control of rabies vaccines

The RID assay is one of the in vitro methods used for in-process control in the production of rabies vaccines for veterinary use. It has been shown to be very useful for determining antigen concentration in the final bulk product. The work presented in this paper, including the production and standardization of candidate standard reagents for use in the Radial Immunodiffusion Assay (RID) was carried out at the Pan American Institute for Food Protection and Zoonoses (INPPAZ/PAHO/WHO). The study was completed with the cooperation of the Faculty of Veterinary Sciences, National University of La Plata (NULP), Argentina, where the validation of the proposed standards and the quality control of samples from 28 different batches of rabies vaccines produced with Pasteur strain rabies virus (PV) in BHK cells were performed. The activity of the vaccines was determined by in vivo (NIH) and in vitro (RID)assays. The results of the candidate reagents for the reagent standardization tests showed stability, sensitivity and reproducibility. The Relative Potency the 1.2 between the problem vaccines and the reference vaccine was estimated by variance and regression analysis. The results of our validation study show that the INPPAZ (PAHO/WHO) is capable of producing and distributing the above-mentioned standard reagents, as well as of providing support for the incorporation of the RID technique (sensitive, rapid and inexpensive) to the laboratories that manufacture rabies vaccines in Latin America and the Caribbean.

Identification of risk factors for death from tetanus in Pernambuco, Brazil: a case-control study

A case-control study was conducted to identify risk factors for death from tetanus in the State of Pernambuco, Brazil. Information was obtained from medical records of 152 cases and 152 controls, admitted to the tetanus unit in the State University Hospital, in Recife, from 1990 to 1995. Variables were grouped in three different sets. Crude and adjusted odds ratios, p-values and 95% confidence intervals were estimated. Variables selected in the multivariate analysis in each set were controlled for the effect of those selected in the others. All factors related to the disease progression - incubation period, time elapsed between the occurrence of the first tetanus symptom and admission, and period of onset - showed a statistically significant association with death from tetanus. Similarly, signs and/or symptoms occurring on admission or in the following 24 hours (second set): reflex spasms, neck stiffness, respiratory signs/symptoms and respiratory failure requiring artificial ventilation (third set) were associated with death from tetanus even when adjusted for the effect of the others.

Health care marketing: the theory of planned behavior applied to patients' choise between private and public providers in the portuguese health care system.

Dissertation submitted in partial fulfillment of the requirements for degree of Master in Statistics and Information Management.

Protocolo de fisioterapia, com auxílio de biofeedback electromiográfico, em utentes com disfunções do ombro: efeitos na dor, funcionalidade e estabilidade dinâmica

RESUMO: Introdução: A dor e disfunções do movimento no complexo articular do ombro (CAO) são comuns e debilitantes. O uso de exercícios segundo os pressupostos de estabilidade dinâmica (ED), com auxílio de Biofeedback electromiográfico (BEMG) tem vindo a ser referido, como uma forma de aumentar a efectividade da intervenção nas disfunções do complexo articular do ombro (DCAO)Objectivo Principal: Estudar os efeitos de um protocolo de intervenção, com BEMG, cujas finalidades foram abolir a dor, aumentar a funcionalidade e a ED da omoplata, em utentes com DCAO. Objectivos secundários: Comparar os subgrupos e quanto às características, resultados, tempos de intervenção total e até atingir critérios de alta; Comparar os resultados nos momentos inicial e final. Métodos: Foi realizado um coorte clínico, longitudinal, retrospectivo, observacional, analítico. A amostra foi constituída por 82 sujeitos, divididos em dois subgrupos (n=53 SCSA e n=29 IGU). Os instrumentos de medida utilizados foram a EVA, o DASH, o SPADI e o BEMG. Foi seguido o protocolo de ED proposto por Santos e Matias (2007), de acordo com as 3 fases de intervenção por eles descritas, realizando uma sessão semanal, monitorizando exercícios que seguem estes princípios, com BEMG. Foram avaliadas as variáveis dor, postura, padrão de recrutamento, controlo motor, posição inicial da omoplata (PIO), amplitudes articulares (AA’s), força muscular (FM) e postura. Para analisar os dados, recorreu-se a estatística descritiva e inferencial. Resultados: A intervenção foi efectiva na abolição da dor no momento (0,43 para 0,00/10EVA no subgrupo SCSA e 0,66 para 0,00/10EVA no subgrupo IGU) na pior dor (5,47/10EVA para 0,06/10EVA no subgrupo SCSA e 5,28/10 para 0,14/10 no subgrupo IGU), no aumento da função (28,57 para 0,66/100DASH e 39,00 para 0,63/100SAPDI no subgrupo SCSA e 25,80 para 0,38/100DASH e 28,19 para 0,39/100 no subgrupo IGU) e no aumento da ED da omoplata com normalização do padrão de recrutamento, controlo motor, PIO dentro do espectro de normalidade e boa capacidade de controlar a sua posição, ao longo do movimento do membro superior (MS). A intervenção proporcionou, ainda a normalização das AA’s, FM e autocorrecção postural. O tempo médio de intervenção foi de 6,45semanas no subgrupo SCSA e 5,83sem no subgrupo IGU. Estes resultados são semelhantes comparativamente a estudos que utilizaram uma intervenção baseada nos mesmos princípios (Matias e Cruz, 2004; Cunha e Matias, 2006; Santos e Matias, 2007; Rodrigues e Matias, 2009). Conclusão: O protocolo de intervenção aplicado, com uso de exercícios baseados nos princípios da ED e uso de BEMG, permitiu o alcance dos objectivos, junto de utentes com DCAO (SCSA e IGU). Verificou-se que, independentemente da condição, os resultados foram idênticos em ambos subgrupos, não apresentando diferenças significativas entre as variáveis de medida final, o tempo total de intervenção e os tempos até atingir os critérios de alta, expecto para a Dor, sendo este superior no subgrupo SCSA.---------------------------------------- ABSTRACT:Introduction: Movement disorders and pain in the shoulder joint complex (SJC) are common and debilitating. The use of exercises under the premises of dynamic stability (DS), with the aid of electromyographic biofeedback (EMGBF) has been mentioned as a way to increase the effectiveness of the intervention in disorders of the shoulder joint complex (DSJC) Main Objective: To evaluate the results of an intervention protocol, with EMGBF whose aims were to abolish the pain, increase functionality and DS of the scapula in patients with DSJC. Objectives: To compare the subgroups and the characteristics, outcomes, and total intervention times to reach discharge criteria; to compare the results at the beginning and at the end. Methods: We conducted a clinical cohort, longitudinal, retrospective, observational analysis. The sample consisted of 82 subjects, divided into two subgroups (n = 53 shoulder impingement syndrome SIS n = 29 shoulder joint instability SJI). The measurement instruments used were the VAS, DASH, SPADI, and EMGBF. It was followed the DS protocol proposed by Santos and Matias (2007), according to the three phases of intervention, described by performing a weekly session, monitoring exercises that follow these principles, with EMGBF. The variables were pain, posture, recruitment pattern, motor control, the initial position of the scapula (IPS), range of motion (ROM), muscular strength (MS) and posture. To analyze the data, we used the descriptive and inferential statistics. Results: The intervention was effective in abolishing the pain at the time (0.43 to 0.00/10 VAS in the SIS subgroup and 0.66 to 0.00/10 VAS in the SJI subgroup) in worst pain (5.47 to 0,06/10 VAS in the SIS subgroup and 5.28/ to 0.14/10 VAS in the SJI subgroup), increasing the function (28,57 to 0,66/100 DASH and 39,00 to 0,63/100 SAPDI in the SIS subgroup and 25,80 to 0,38/100 DASH and 28,19 to 0,39/100 SPADI in the SJI subgroup) and the increase in DS of the scapula with normalization of the pattern recruitment, motor control, IPS within the spectrum of normalcy and good ability to control its position along the movement of the upper limb (UL). The intervention provided, although the normalization of ROM, MS and self-correcting posture. The average length of intervention was 6.45 weeks in the SIS subgroup and 5.83 in the IS subgroup. These results are comparable with similar studies that used an intervention based on the same principles (Matias e Cruz, 2004; Cunha e Matias, 2006; Santos e Matias, 2007; Rodrigues e Matias, 2009). Conclusion: The intervention protocol implemented with the use of exercises based on the principles of DS and the use of EMGBF was effective, allowing the accomplishment of goals, in patients with DSJC (SIS and SJI). It was found that, regardless of condition, the results were identical in both groups, showing no significant differences between the variables of the final measure, the total time of intervention and the times to reach discharge criteria, except for pain, which was higher in the SIS subgroup.

Design of New Materials for Passive Vibration Control

The aim of this contribution is to extend the techniques of composite materials design to non-linear material behaviour and apply it for design of new materials for passive vibration control. As a first step a computational tool allowing determination of macroscopic optimized one-dimensional isolator behaviour was developed. Voigt, Maxwell, standard and more complex material models can be implemented. Objective function considers minimization of the initial reaction and/or displacement peak as well as minimization of the steady-state amplitude of reaction and/or displacement. The complex stiffness approach is used to formulate the governing equations in an efficient way. Material stiffness parameters are assumed as non-linear functions of the displacement. The numerical solution is performed in the complex space. The steady-state solution in the complex space is obtained by an iterative process based on the shooting method which imposes the conditions of periodicity with respect to the known value of the period. Extension of the shooting method to the complex space is presented and verified. Non-linear behaviour of material parameters is then optimized by generic probabilistic meta-algorithm, simulated annealing. Dependence of the global optimum on several combinations of leading parameters of the simulated annealing procedure, like neighbourhood definition and annealing schedule, is also studied and analyzed. Procedure is programmed in MATLAB environment.

A retrospective evaluation of a score system adopted by the Ministry of Health, Brazil in the diagnosis of pulmonary tuberculosis in childhood: a case control study

Based on a retrospective case-control study we evaluated the score system adopted by the Ministry of Health of Brazil (Ministério da Saúde - MS), to diagnose pulmonary tuberculosis (PTB) in childhood. This system is independent of bacteriological or histopathological data to define a very likely (> or = 40 points), possible (30-35 points) or unlikely (< or = 25 points) diagnosis of tuberculosis. Records of hospitalized non-infected HIV children at the Instituto de Puericultura e Pediatria Martagão Gesteira of Federal University of Rio de Janeiro (IPPMG-UFRJ), were reviewed. Patients were adjusted for age and divided in two different groups: 45 subjects in the case group (culture-positive) [mean of age = 10.64 mo; SD 9.66]; and 96 in the control group (culture-negative and clinic criteria that dismissed the disease) [mean of age = 11.79 mo.; SD 11.31]. Among the variables analyzed, the radiological status had the greater impact into the diagnosis (OR = 25.39), followed by exposure to adult with tuberculosis (OR = 10.67), tuberculin skin test >10mm (OR = 8.23). The best cut-off point to the diagnosis of PTB was 30 points, where the score system was more accurate, with sensitivity of 88.9% and specificity of 86.5%.

Optimizing potentiometric ionophore and electrode design for environmental on-site control of antibiotic drugs: Application to sulfamethoxazole

Potentiometric sensors are typically unable to carry out on-site monitoring of environmental drug contaminants because of their high limits of detection (LODs). Designing a novel ligand material for the target analyte and managing the composition of the internal reference solution have been the strategies employed here to produce for the first time a potentiometric-based direct reading method for an environmental drug contaminant. This concept has been applied to sulfamethoxazole (SMX), one of the many antibiotics used in aquaculture practices that may occur in environmental waters. The novel ligand has been produced by imprinting SMX on the surface of graphitic carbon nanostructures (CN) < 500 nm. The imprinted carbon nanostructures (ICN) were dispersed in plasticizer and entrapped in a PVC matrix that included (or not) a small amount of a lipophilic additive. The membrane composition was optimized on solid-contact electrodes, allowing near-Nernstian responses down to 5.2 μg/mL and detecting 1.6 μg/mL. The membranes offered good selectivity against most of the ionic compounds in environmental water. The best membrane cocktail was applied on the smaller end of a 1000 μL micropipette tip made of polypropylene. The tip was then filled with inner reference solution containing SMX and chlorate (as interfering compound). The corresponding concentrations were studied for 1 × 10−5 to 1 × 10−10 and 1 × 10−3 to 1 × 10−8 mol/L. The best condition allowed the detection of 5.92 ng/L (or 2.3 × 10−8 mol/L) SMX for a sub-Nernstian slope of −40.3 mV/decade from 5.0 × 10−8 to 2.4 × 10−5 mol/L.

An Extension of Estimation of Domain of Attraction for Fractional Order Linear System Subject to Saturation Control

This paper employs the Lyapunov direct method for the stability analysis of fractional order linear systems subject to input saturation. A new stability condition based on saturation function is adopted for estimating the domain of attraction via ellipsoid approach. To further improve this estimation, the auxiliary feedback is also supported by the concept of stability region. The advantages of the proposed method are twofold: (1) it is straightforward to handle the problem both in analysis and design because of using Lyapunov method, (2) the estimation leads to less conservative results. A numerical example illustrates the feasibility of the proposed method.

An efficient numerical scheme for solving multi-dimensional fractional optimal control problems with a quadratic performance index

The shifted Legendre orthogonal polynomials are used for the numerical solution of a new formulation for the multi-dimensional fractional optimal control problem (M-DFOCP) with a quadratic performance index. The fractional derivatives are described in the Caputo sense. The Lagrange multiplier method for the constrained extremum and the operational matrix of fractional integrals are used together with the help of the properties of the shifted Legendre orthonormal polynomials. The method reduces the M-DFOCP to a simpler problem that consists of solving a system of algebraic equations. For confirming the efficiency and accuracy of the proposed scheme, some test problems are implemented with their approximate solutions.