997 resultados para Constant-weight Codes


Relevância:

20.00% 20.00%

Publicador:

Resumo:

Neuropeptide Y (NPY) is a neurotransmitter promoting energy storage by activating Y-receptors and thus affecting food intake, thermogenesis and adipose tissue metabolism. NPY is expressed both in the central and sympathetic nervous system. Hypothalamic NPY is known to stimulate feeding, but the effects of noradrenergic neuron NPY are more ambiguous. Chronic stress stimulates fat accumulation via NPY release from noradrenergic neurons. Furthermore, polymorphism in the human Npy gene has been associated with metabolic disturbances and increased NPY secretion after sympathetic stimulation. The main objective of this study was to clarify the mechanisms of noradrenergic neuron NPY in the development of obesity. The metabolic phenotype of a homozygous mouse overexpressing NPY in the brain noradrenergic neurons and sympathetic nervous system (OE-NPYDβH mouse) was characterized. OE-NPYDβH mice had an increased fat mass and body weight, which caused impairments of glucose metabolism and hyperinsulinaemia with age. There were no differences in energy intake or expenditure, but the sympathetic tone was down-regulated and the endocannabinoid system activated. Furthermore, peripheral Y2-receptors in energy-rich conditions played an important role in mediating the fat-accumulating effect of NPY. These results indicate that noradrenergic neuron NPY promotes obesity via direct effects in the periphery and by modulating the sympatho-adrenal and endocannabinoid systems. Additionally, NPY in the central noradrenergic neurons is believed to possess many important roles. The phenotype of the OE-NPYDβH mouse resembles the situations of chronic stress and Npy gene polymorphism and thus these mice may be exploited in testing novel drug candidates for the treatment of obesity.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

OBJECTIVE: We investigated the impact of weight loss on urinary albumin excretion (UAE) and creatinine clearance in obese patients with metabolic syndrome. METHODS: Thirty-five obese patients undertook a 12-week calorie-restricted diet. The patients underwent a metabolic (oral glucose tolerance test, plasma lipids, and uric acid) and renal hemodynamic evaluations (creatinine clearance and urinary albumin excretion) before (phase 1), and after the 12-week diet (phase 2). RESULTS: After the dietary intervention, the subjects were divided into two groups: patients who achieved the target weight reduction (R: responders, n = 14), and patients who did not (NR: non-responders, n = 21). The patients in Group R showed an improvement in lipid profile, a decrease in UAE (median = 162.5 mg/24 hours, range: 0.8 to 292 mg/24 hours, at phase 1 versus 10.4 mg/24 hours, range: 1.6 to 22.4 mg/24 hours, at phase 2), and a significant reduction in creatinine clearance (121.4 ± 66.5 mL/min. in phase 1 to 92.9 ± 35.6 mL/min. at the end of phase 2, p = 0.001). In Group NR, no statistically significant differences were observed between phases 1 and 2. CONCLUSION: Body weight reduction has a positive impact on renal hemodynamics, decreasing urinary albumin excretion as well as glomerular hyperfiltration in obese patients with metabolic syndrome.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The parents of premature infants, especially the mothers, are at increased risk for distress. Infants born prematurely are at risk for developmental problems. The aim of this study was to investigate whether the psychological well-being of both parents is associated with child development in very low birth weight (VLBW, ≤1500g) children. The burden of prematurity-related morbidity to the children and to the family was also assessed. A cohort of 201 VLBW infants born during 2001–2006 in the Turku University Hospital, Finland, and their parents were studied (I–IV). One study included a control group (n=166) of full-term infants (IV). The psychological well-being of the parents was evaluated by assessments of depressive symptoms, parenting stress, the sense of coherence and general family functioning. Cognitive, behavioral, and socio-emotional development, and the health-related quality of life (HRQoL) of the children were determined when the children were 2 to 8 years old. The psychological well-being of the parents was associated with the cognitive, behavioral and social development of the VLBW children. The VLBW infants with prematurity-related morbidities had a poorer HRQoL and the general functioning of the family was inferior compared to the control children and their families. 64.5% of the VLBW children survived without morbidities. Most of the VLBW children did not have significant behavior problems (93%), had normal social skills (63%), had no emotional problems (64%), and had no problems in executive functioning (62%). Only 3% of the surviving VLBW infants had significant cognitive delay. In conclusion, the depressive symptoms and stress of the parents can be risk factors for disadvantageous child development, while a strong sense of coherence can be protective. Parents of the premature children with developmental delays might also experience more depressive symptoms and stress than other parents. Prematurity-related morbidities were a burden to the VLBW child as well as to the family.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The need for reduced intrinsic weight of structures and vehicles in the transportation industry has made aluminium research of interest. Aluminium has properties that are favourable for structural engineering, including good strength-to-weight ratio, corrosion resistance and machinability. It can be easily recycled saving energy used in smelting as compared to steel. Its alloys can have ultimate tensile strength of up to 750 MPa, which is comparable to steel. Aluminium alloys are generally weldable, however welding of high strength alloys like the 7xxx series pose considerable challenges. This paper presents research on the weldability of high strength aluminium alloys, principally the 7xxx series. The weldability with various weld processes including MIG, TIG, and FSW, is discussed in addition to consideration of joint types, weld defects and recommendations for minimizing or preventing weld defects. Experimental research was carried out on 7025-T6 and AW-7020 alloys. Samples were welded, and weld cross sections utilized in weld metallurgy studies. Mechanical tests were carried out including hardness tests and tensile tests. In addition, testing was done for the presence of Al2O3 on exposed aluminium alloy. It was observed that at constant weld heat input using a pulsed MIG system, the welding speed had little or no effect on the weld hardness. However, the grain size increased as the filler wire feed rate, welding current and welding speed increased. High heat input resulted in lower hardness of the weld profile. Weld preheating was detrimental to AW- 7020 welds; however, artificial aging was beneficial. Acceptable welds were attained with pulsed MIG without the removal of the Al2O3 layer prior to welding. The Al2O3 oxide layer was found to have different compositions in different aluminium alloys. These findings contribute useful additional information to the knowledge base of aluminium welding. The application of the findings of this study in welding will help reduce weld cost and improve high strength aluminium structure productivity by removing the need for pre-weld cleaning. Better understanding of aluminium weld metallurgy equips weld engineers with information for better aluminium weld design.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Preventive maintenance of frequency converters has been based on pre-planned replace-ment of wearing or ageing components. Exchange intervals follow component life-time expectations which are based on empirical knowledge or schedules defined by manufac-turer. However, the lifetime of a component can vary significantly, because drives are used in very different operating environments and applications. The main objective of the research was to provide information on methods, i.e. how in-verter's operating condition can be measured reliably under field conditions. At first, the research focused on critical components such as current transducers, IGBTs and DC link capacitor bank, because these aging have already been identified. Of these, the DC link capacitor measurement method was selected for closer examination. With this method, the total capacitance and its total series resistance can be measured. The suitability of the measuring procedure was estimated on the basis of practical measurements. The research was made by using so called triangulation method, including a literature review, simulations and practical measurements. Based on the results, the new measu-rement method seems suitable with some reservations to practical measurements. How-ever, the measuring method should be further developed in order to improve its reliability.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The increased awareness and evolved consumer habits have set more demanding standards for the quality and safety control of food products. The production of foodstuffs which fulfill these standards can be hampered by different low-molecular weight contaminants. Such compounds can consist of, for example residues of antibiotics in animal use or mycotoxins. The extremely small size of the compounds has hindered the development of analytical methods suitable for routine use, and the methods currently in use require expensive instrumentation and qualified personnel to operate them. There is a need for new, cost-efficient and simple assay concepts which can be used for field testing and are capable of processing large sample quantities rapidly. Immunoassays have been considered as the golden standard for such rapid on-site screening methods. The introduction of directed antibody engineering and in vitro display technologies has facilitated the development of novel antibody based methods for the detection of low-molecular weight food contaminants. The primary aim of this study was to generate and engineer antibodies against low-molecular weight compounds found in various foodstuffs. The three antigen groups selected as targets of antibody development cause food safety and quality defects in wide range of products: 1) fluoroquinolones: a family of synthetic broad-spectrum antibacterial drugs used to treat wide range of human and animal infections, 2) deoxynivalenol: type B trichothecene mycotoxin, a widely recognized problem for crops and animal feeds globally, and 3) skatole, or 3-methyindole is one of the two compounds responsible for boar taint, found in the meat of monogastric animals. This study describes the generation and engineering of antibodies with versatile binding properties against low-molecular weight food contaminants, and the consecutive development of immunoassays for the detection of the respective compounds.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Périodicité : Hebdomadaire (annoncé irrégulier pour contourner l'autorisation préalable)