Comparison of anaerobic threshold, oxygen uptake and heart rate between specific table

Coordena����o de Aperfei��oamento de Pessoal de N��vel Superior (CAPES)

Dropouts or Discontinuity of the Treatment of Tuberculosis in Rio Branco, Acre

This research investigates the factors related to the discontinuity of the treatment of tuberculosis in Rio Branco-Acre. To the fulfillment of this research, a contribution to ethnography has been adopted, for the successful apprehension of the reality to be studied. The research has been developed in two mapping steps: on the first, a search for information on the SINAN (System of National Injuries Notification - Sistema de Notificacao de Agravos Nacionais) and on the Municipal Coordination of the Tuberculosis Program databases was taken; the second aimed to record facts from the observation of the care given on a health care unit, which serves assistance to tuberculosis carriers in treatment, and the interviews of the elected subjects. On the analysis of the observations, narrative and interview collection, it was observed that the professionals of health services label some people as auspicious to discontinue the treatment and don't consider the different ways of life on the approach of their patients, complicating the formation of the bond and favoring the discontinuity. It was also identified people treating for tuberculosis that had many ways of dealing with the limitations generated by the disease, such as restrictions for the work, among others, and people that discontinued the treatment took in consideration their system of beliefs and values, as well as the perception of health/disease, due to the feeling of cure when the treatment was interrupted.

Clinical features of obsessive-compulsive disorder with hoarding symptoms: A multicenter study

Background: Factor analyses indicate that hoarding symptoms constitute a distinctive dimension of obsessive-compulsive disorder (OCD), usually associated with higher severity and limited insight. The aim was to compare demographic and clinical features of OCD patients with and without hoarding symptoms. Method: A cross sectional study was conducted with 1001 DSM-IV OCD patients from the Brazilian Research Consortium of Obsessive-Compulsive Spectrum Disorders (CTOC), using several instruments. The presence and severity of hoarding symptoms were determined using the Dimensional Yale-Brown Obsessive-Compulsive Scale. Statistical univariate analyses comparing factors possibly associated with hoarding symptoms were conducted, followed by logistic regression to adjust the results for possible confounders. Results: Approximately half of the sample (52.7%, n = 528) presented hoarding symptoms, but only four patients presented solely the hoarding dimension. Hoarding was the least severe dimension in the total sample (mean score: 3.89). The most common lifetime hoarding symptom was the obsessive thought of needing to collect and keep things for the future (44.0%, n = 440). After logistic regression, the following variables remained independently associated with hoarding symptoms: being older, living alone, earlier age of symptoms onset, insidious onset of obsessions, higher anxiety scores, poorer insight and higher frequency of the symmetry-ordering symptom dimension. Concerning comorbidities, major depressive, posttraumatic stress and attention deficit/hyperactivity disorders, compulsive buying and tic disorders remained associated with the hoarding dimension. Conclusion: OCD hoarding patients are more likely to present certain clinical features, but further studies are needed to determine whether OCD patients with hoarding symptoms constitute an etiologically discrete subgroup. (C) 2012 Elsevier Ltd. All rights reserved.

IMPLEMENTATION OF PROTECTED AREAS FORCENTRAL CORRIDOR OF ATLANTIC FORESTIN BAHIA: CHALLENGES AND LIMITS

In Brazil, Protected Areas (PAs) are considered the cornerstone for development of national strategies for biodiversity conservation. Considering this point of view we analyzed thirty protected areas belonging to Atlantic Central Corridor of Atlantic Forest in Bahia, aiming to identify and analyze its current level of implementation. Lemos de Sa and Ferreira (2000) methodology which consist of applying a standard scale, where the variation of the level of implementation conforms to a range of 0 to 5 points was used, with appropriate adaptations. After obtaining the data from the implementation level we use the aggregation method of Ward to help visualize the dissimilarity between the protected areas studied. We used an international classification proposed by IUCN (International Union for Conservation of Nature) for that the UCs to be compared with works done in another countries, the UCs considered are in the groups Ia, II, V and VI da IUCN. As results, 50% of protected areas analyzed are reasonably implemented, 40% inadequately implemented, 6.7% are presented only on paper and only 3.3% can be classified as satisfactorily implemented. These areas presents problems in their regularization; deficiency in infrastructure, human and financial resources. Given the results its clear the recurrent fact that conservation areas under study must be effectively implemented and for this to occur environmental policies should be focused on actions to consolidate the goals of conservation strategy.

Genome sequence of Xanthomonas fuscans subsp. fuscans strain 4834-R reveals that flagellar motility is not a general feature of xanthomonads

Abstract Background Xanthomonads are plant-associated bacteria responsible for diseases on economically important crops. Xanthomonas fuscans subsp. fuscans (Xff) is one of the causal agents of common bacterial blight of bean. In this study, the complete genome sequence of strain Xff 4834-R was determined and compared to other Xanthomonas genome sequences. Results Comparative genomics analyses revealed core characteristics shared between Xff 4834-R and other xanthomonads including chemotaxis elements, two-component systems, TonB-dependent transporters, secretion systems (from T1SS to T6SS) and multiple effectors. For instance a repertoire of 29 Type 3 Effectors (T3Es) with two Transcription Activator-Like Effectors was predicted. Mobile elements were associated with major modifications in the genome structure and gene content in comparison to other Xanthomonas genomes. Notably, a deletion of 33 kbp affects flagellum biosynthesis in Xff 4834-R. The presence of a complete flagellar cluster was assessed in a collection of more than 300 strains representing different species and pathovars of Xanthomonas. Five percent of the tested strains presented a deletion in the flagellar cluster and were non-motile. Moreover, half of the Xff strains isolated from the same epidemic than 4834-R was non-motile and this ratio was conserved in the strains colonizing the next bean seed generations. Conclusions This work describes the first genome of a Xanthomonas strain pathogenic on bean and reports the existence of non-motile xanthomonads belonging to different species and pathovars. Isolation of such Xff variants from a natural epidemic may suggest that flagellar motility is not a key function for in planta fitness.

Strategies and procedures for the development of intermodal freight transport in Europe: the role of motorways of the sea services and railway terminals

Since the birth of the European Union on 1957, the development of a single market through the integration of national freight transport networks has been one of the most important points in the European Union agenda. Increasingly congested motorways, rising oil prices and concerns about environment and climate change require the optimization of transport systems and transport processes. The best solution should be the intermodal transport, in which the most efficient transport options are used for the different legs of transport. This thesis examines the problem of defining innovative strategies and procedures for the sustainable development of intermodal freight transport in Europe. In particular, the role of maritime transport and railway transport in the intermodal chain are examined in depth, as these modes are recognized to be environmentally friendly and energy efficient. Maritime transport is the only mode that has kept pace with the fast growth in road transport, but it is necessary to promote the full exploitation of it by involving short sea shipping as an integrated service in the intermodal door-to-door supply chain and by improving port accessibility. The role of Motorways of the Sea services as part of the Trans-European Transport Network is is taken into account: a picture of the European policy and a state of the art of the Italian Motorways of the Sea system are reported. Afterwards, the focus shifts from line to node problems: the role of intermodal railway terminals in the transport chain is discussed. In particular, the last mile process is taken into account, as it is crucial in order to exploit the full capacity of an intermodal terminal. The difference between the present last mile planning models of Bologna Interporto and Verona Quadrante Europa is described and discussed. Finally, a new approach to railway intermodal terminal planning and management is introduced, by describing the case of "Terminal Gate" at Verona Quadrante Europa. Some proposals to favour the integrate management of "Terminal Gate" and the allocation of its capacity are drawn up.

Architectures and design patterns for functional design of logic control and diagnostics in industrial automation

Recently in most of the industrial automation process an ever increasing degree of automation has been observed. This increasing is motivated by the higher requirement of systems with great performance in terms of quality of products/services generated, productivity, efficiency and low costs in the design, realization and maintenance. This trend in the growth of complex automation systems is rapidly spreading over automated manufacturing systems (AMS), where the integration of the mechanical and electronic technology, typical of the Mechatronics, is merging with other technologies such as Informatics and the communication networks. An AMS is a very complex system that can be thought constituted by a set of flexible working stations, one or more transportation systems. To understand how this machine are important in our society let considerate that every day most of us use bottles of water or soda, buy product in box like food or cigarets and so on. Another important consideration from its complexity derive from the fact that the the consortium of machine producers has estimated around 350 types of manufacturing machine. A large number of manufacturing machine industry are presented in Italy and notably packaging machine industry,in particular a great concentration of this kind of industry is located in Bologna area; for this reason the Bologna area is called ���packaging valley���. Usually, the various parts of the AMS interact among them in a concurrent and asynchronous way, and coordinate the parts of the machine to obtain a desiderated overall behaviour is an hard task. Often, this is the case in large scale systems, organized in a modular and distributed manner. Even if the success of a modern AMS from a functional and behavioural point of view is still to attribute to the design choices operated in the definition of the mechanical structure and electrical electronic architecture, the system that governs the control of the plant is becoming crucial, because of the large number of duties associated to it. Apart from the activity inherent to the automation of themachine cycles, the supervisory system is called to perform other main functions such as: emulating the behaviour of traditional mechanical members thus allowing a drastic constructive simplification of the machine and a crucial functional flexibility; dynamically adapting the control strategies according to the different productive needs and to the different operational scenarios; obtaining a high quality of the final product through the verification of the correctness of the processing; addressing the operator devoted to themachine to promptly and carefully take the actions devoted to establish or restore the optimal operating conditions; managing in real time information on diagnostics, as a support of the maintenance operations of the machine. The kind of facilities that designers can directly find on themarket, in terms of software component libraries provides in fact an adequate support as regard the implementation of either top-level or bottom-level functionalities, typically pertaining to the domains of user-friendly HMIs, closed-loop regulation and motion control, fieldbus-based interconnection of remote smart devices. What is still lacking is a reference framework comprising a comprehensive set of highly reusable logic control components that, focussing on the cross-cutting functionalities characterizing the automation domain, may help the designers in the process of modelling and structuring their applications according to the specific needs. Historically, the design and verification process for complex automated industrial systems is performed in empirical way, without a clear distinction between functional and technological-implementation concepts and without a systematic method to organically deal with the complete system. Traditionally, in the field of analog and digital control design and verification through formal and simulation tools have been adopted since a long time ago, at least for multivariable and/or nonlinear controllers for complex time-driven dynamics as in the fields of vehicles, aircrafts, robots, electric drives and complex power electronics equipments. Moving to the field of logic control, typical for industrial manufacturing automation, the design and verification process is approached in a completely different way, usually very ���unstructured���. No clear distinction between functions and implementations, between functional architectures and technological architectures and platforms is considered. Probably this difference is due to the different ���dynamical framework���of logic control with respect to analog/digital control. As a matter of facts, in logic control discrete-events dynamics replace time-driven dynamics; hence most of the formal and mathematical tools of analog/digital control cannot be directly migrated to logic control to enlighten the distinction between functions and implementations. In addition, in the common view of application technicians, logic control design is strictly connected to the adopted implementation technology (relays in the past, software nowadays), leading again to a deep confusion among functional view and technological view. In Industrial automation software engineering, concepts as modularity, encapsulation, composability and reusability are strongly emphasized and profitably realized in the so-calledobject-oriented methodologies. Industrial automation is receiving lately this approach, as testified by some IEC standards IEC 611313, IEC 61499 which have been considered in commercial products only recently. On the other hand, in the scientific and technical literature many contributions have been already proposed to establish a suitable modelling framework for industrial automation. During last years it was possible to note a considerable growth in the exploitation of innovative concepts and technologies from ICT world in industrial automation systems. For what concerns the logic control design, Model Based Design (MBD) is being imported in industrial automation from software engineering field. Another key-point in industrial automated systems is the growth of requirements in terms of availability, reliability and safety for technological systems. In other words, the control system should not only deal with the nominal behaviour, but should also deal with other important duties, such as diagnosis and faults isolations, recovery and safety management. Indeed, together with high performance, in complex systems fault occurrences increase. This is a consequence of the fact that, as it typically occurs in reliable mechatronic systems, in complex systems such as AMS, together with reliable mechanical elements, an increasing number of electronic devices are also present, that are more vulnerable by their own nature. The diagnosis problem and the faults isolation in a generic dynamical system consists in the design of an elaboration unit that, appropriately processing the inputs and outputs of the dynamical system, is also capable of detecting incipient faults on the plant devices, reconfiguring the control system so as to guarantee satisfactory performance. The designer should be able to formally verify the product, certifying that, in its final implementation, it will perform itsrequired function guarantying the desired level of reliability and safety; the next step is that of preventing faults and eventually reconfiguring the control system so that faults are tolerated. On this topic an important improvement to formal verification of logic control, fault diagnosis and fault tolerant control results derive from Discrete Event Systems theory. The aimof this work is to define a design pattern and a control architecture to help the designer of control logic in industrial automated systems. The work starts with a brief discussion on main characteristics and description of industrial automated systems on Chapter 1. In Chapter 2 a survey on the state of the software engineering paradigm applied to industrial automation is discussed. Chapter 3 presentes a architecture for industrial automated systems based on the new concept of Generalized Actuator showing its benefits, while in Chapter 4 this architecture is refined using a novel entity, the Generalized Device in order to have a better reusability and modularity of the control logic. In Chapter 5 a new approach will be present based on Discrete Event Systems for the problemof software formal verification and an active fault tolerant control architecture using online diagnostic. Finally conclusive remarks and some ideas on new directions to explore are given. In Appendix A are briefly reported some concepts and results about Discrete Event Systems which should help the reader in understanding some crucial points in chapter 5; while in Appendix B an overview on the experimental testbed of the Laboratory of Automation of University of Bologna, is reported to validated the approach presented in chapter 3, chapter 4 and chapter 5. In Appendix C some components model used in chapter 5 for formal verification are reported.

Social aspects of organic agriculture and other multifunctional benefits - Successful EU models compared with possibilities for organic developments in Croatia

Main objective of the dissertation is to illustrate how social and educational aspects (in close interaction with other multifunctional aspects in organic agriculture) which are developed on different multifunctional organic farms in Italy and Netherlands, as well as established agricultural policy frameworks in these countries, can be compared with the situation in Croatian organics and can contribute to further developent of organic issues in the Repubic of Croatia. So, through different chapters, the dissertation describes the performance of organic agriculture sectors in Italy, Netherlands and Croatia within the national agricultural policy frameworks, it analyzes the role of national institutions and policy in Croatia in connection with Croatia's status of candidate country for enterance into EU and harmonization of legislation with the CAP, as well as analyzes what is the role of national authorities, universities, research centres, but also of private initiatives, NGOs and cooperatives in organic agriculture in Netherlands, Italy and Croatia. Its main part describes how social and educational aspects are interacting with other multifunctional aspects in organic agriculture and analyzes the benefits and contribution of multifunctional activites performed on organic farms to education, healthy nourishment, environment protection and health care. It also assess the strengths and weaknesses of organic agriculture in all researched countries. The dissertation concludes with development opportunities for multifunctional organic agriculture in Croatia, as well as giving perspectives and recommendations for different approaches on the basis of experiences learned from successful EU models accompanied with some personal ideas and proposals.

Legal presumptions in national tax systems (Italy and Belgium) and in EU law

The thesis deals with the concept of presumptions, and in particular of legal presumptions, in the context of national tax systems (Italy and Belgium) and EU law. The purpose was to investigate the concept of legal presumption under a twofold comparative perspective. After having provided a general overview of the common core concept of presumption in the European context, an insight in the national approach to legal presumptions was given by examining two different national experiences, namely the Italian and Belgian tax systems. At this stage, the Constitutional framework and some of the most interesting and relevant at EU level presumptive measures were explored, with a view to underlining possible divergences and common grounds. The concept of (national) legal presumption was then investigated in the context of EU law, with the attempt to systematize under a uniform perspective a matter which has been traditionally dealt with either from the merely national point of view or, at EU level, through a fragmented form. In this instance, the EU law relevant framework and the most significant EUCJ case-law, in particular in the field of customs duties, VAT, on the issue of the repayment of taxes levied in breach of EU law and in the area of direct taxation, were examined so as to construe the overall EU approach to national legal presumptions. This was done with the finality of determining if and to what extent a common analytical framework may be identified, from which were extracted certain criteria governing the compatibility of national legal presumptions with EU law.

The development and deployment of FOTOS: a fast observation of trace organics system

Fl��chtige organische Bestandteile (engl.: VOC) sind in der Atmosph��re in Spuren vorhanden, spielen aber trotzdem eine wichtige Rolle in der Luftchemie: sie beeinflussen das Ozon der Troposph��re, st��dtischen Smog, Oxidationskapazit��t und haben direkte und indirekte Auswirkungen auf die globale Klimaver��nderung. Eine wichtige Klasse der VOC sind die Nicht-Methan-Kohlenwasserstoffe (engl.: NMHC), die ��berwiegend von anthropogenen Quellen kommen. Aus diesem Grund ist f��r Luftchemiker ein Messinstrument n��tig, das die VOC, die NMHC eingeschlossen, mit einer h��heren Zeitaufl��sung misst, besonders f��r Echtzeitmessungen an Bord eines Forschungsflugzeuges. Daf��r wurde das System zur schnellen Beobachtung von organischen Spuren (engl.: FOTOS) entworfen, gebaut f��r den Einsatz in einem neuen Wissenschaftlichen Flugzeug, das in gro��en H��hen und ��ber weite Strecken fliegt, genannt HALO. In der Folge wurde FOTOS in zwei Messkampagnen am Boden getestet. FOTOS wurde entworfen und gebaut mit einem speziell angefertigten, automatisierten, kryogenen Probensystem mit drei Fallen und einem angepassten, erworbenen schnellen GC-MS. Ziel dieses Aufbaus war es, die Vielseitigkeit zu vergr����ern und das St��rungspotential zu verringern, deshalb wurden keine chemischen Trocknungsmittel oder adsorbierenden Stoffe verwendet. FOTOS erreichte eine Probenfrequenz von 5.5 Minuten, w��hrend es mindestens 13 verschiedene C2- bis C5-NMHC ma��. Die Drei-Sigma-Detektionsgrenze f��r n- und iso-Pentan wurde als 2.6 und 2.0 pptv ermittelt, in dieser Reihenfolge. Labortests best��tigten, dass FOTOS ein vielseitiges, robustes, hochautomatisiertes, pr��zises, genaues, empfindliches Instrument ist, geeignet f��r Echtzeitmessungen von VOC in Probenfrequenzen, die angemessen sind f��r ein Forschungsflugzeug wie HALO. Um die Leistung von FOTOS zu best��tigen, wurde vom 26. Januar bis 4. Februar 2010 ein Zwischenvergleich gemacht mit dem GC-FID-System am Meteorologischen Observatorium Hohenpei��enberg, einer WMO-GAW-globalen Station. Dreizehn verschiedene NMHC wurden innerhalb des Rahmens der GWA Data Quality Objectives (DQO) analysiert und verglichen. Mehr als 80% der Messungen von sechs C3- bis C5-NMHC erf��llten diese DQO. Diese erste Messkampagne im Feld hob die Robustheit und Messgenauigkeit von FOTOS hervor, zus��tzlich zu dem Vorteil der h��heren Probenfrequenz, sogar in einer Messung am Boden. Um die M��glichkeiten dieses Instrumentes im Feld zu zeigen, ma�� FOTOS ausgew��hlte leichte NMHC w��hrend einer Messkampagne im Borealen Waldgebiet, HUMPPA-COPEC 2010. Vom 12. Juli bis zum 12. August 2010 beteiligte sich eine internationale Gruppe von Instituten und Instrumenten an Messungen physikalischer und chemischer Gr����en der Gas- und Partikelphasen der Luft ��ber dem Borealen Wald an der SMEAR II-Station nahe Hyytti��l��, Finnland. Es wurden mehrere Hauptpunkte von Interesse im Mischungsverh��ltnis der Alkane und im Isomerenverh��tnis von Pentan identifiziert, insbesondere sehr unterschiedliche Perioden niedriger und hoher Variabilit��t, drei Rauchschwaden von Biomassen-Verbrennung von russischen Waldbr��nden und zwei Tage mit extrem sauberer Luft aus der Polarregion. Vergleiche der NMHC mit anderen anthropogenen Indikatoren zeigten mehrere Quellen anthropogener Einfl��sse am Ort auf und erlaubten eine Unterscheidung zwischen lokalen und weiter entfernten Quellen. Auf einen minimalen nat��rlichen Beitrag zum 24h-Kreislauf von NOx wurde geschlussfolgert aus der Korrelation von NOx mit Alkanen. Alterssch��tzungen der Luftmassen durch das Isomerenverh��ltnis von Pentan wurden erschwert durch sich ver��ndernde Verh��ltnisse der Quellen und durch Besonderheiten der Photochemie w��hrend des Sommers im hohen Norden. Diese Messungen zeigten den Wert des Messens leichter NMHC, selbst in abgelegenen Regionen, als einen zus��tzlichen spezifischen Marker von anthropogenem Einfluss.

Another Way of Saying Enough: Environmental Concern and Popular Mobilization in Kyrgyzstan

This article is a foray into the understudied issue of environmental protest politics in Central Asia. Specifically, it uses Kyrgyzstan as a case study to test the argument that environmental concerns mobilized people to engage in protest and in ways different from other kinds of protest. This essay presents the first systematic study of public opinion about the environment in Kyrgyzstan. It includes results from a 2009 nationwide survey, over 100 expert and elite interviews, and newspaper content analysis. Furthermore, it spatially analyzes these results to identify geographical variation in public perception and political event occurrence patterns. Protest engagement is a complex process determined by the interaction of several factors, and is not explained solely by affluence, rationality, or grievances. Eco-mobilization - collective political action about the environment - represents a class of protest events that offers a different view into mass discontent in the former Soviet Union and neo-patrimonial societies. The study finds that these political actions about the environment are not necessarily elite driven; there is a basic foundation of national concern and salience of these issues, and demonstrated environmental beliefs do help to explain protest behavior.

The Daughters of Bridget McGhee

When Huxley proposed, Blythe imagined herself fifty years into the future at his funeral. He was such a good man, they���d say. Seventy-two is too young, they���d say. She���d nod and, she had imagined, remember this moment ��� them lounging in her bed during the early afternoon with the sunlight threatening to burst from behind the drawn shades, him lying on his side with his left arm anchored around her waist, and the tickle of his thumb as he traced circles on her bellybutton. She rubbed her nose against his neck and breathed. His scent was different from that of Walter. Huxley smelled of pears and basil. Walter smelled of leather and soap. She didn���t smell Walter intentionally, of course. He walked into the White Dog the prior day while she was drinking a mint-mocha cappuccino and studying for an exam on medical physiology. The wind whiffed his odor towards her. She didn���t look at him, but she couldn���t stop from inhaling. ���People get married after college,��� Huxley swung his right leg over and straddled her, forcing her to look at him. ���It���s almost been a year since we graduated. It���s what we should do.��� She had wondered if he could donate organs if he were seventy-two years old. Not his liver or heart or anything like that, of course, but maybe his eyes. It���d be a shame if they couldn���t preserve his eyes. She noticed them first: they were alert and misty blue, like Santa���s. But then she wondered if eye characteristics like color were even changed during cornea transplants. Walter had plain brown eyes. She hated brown eyes. She told people that she had brown eyes, because they were dark and no one ever looked close enough. Except Huxley. They were at dinner with mutual friends and were talking about eye color, and how they all wished that theirs were like those of the young Afghan girl on the 1985 cover of National Geographic.

Patterns of functional enzyme activity in fungus farming ambrosia beetles

Introduction In wood-dwelling fungus-farming weevils, the so-called ambrosia beetles (Curculionidae: Scolytinae and Platypodinae), wood in the excavated tunnels is used as a medium for cultivating fungi by the combined action of digging larvae (which create more space for the fungi to grow) and of adults sowing and pruning the fungus. The beetles are obligately dependent on the fungus that provides essential vitamins, amino acids and sterols. However, to what extent microbial enzymes support fungus farming in ambrosia beetles is unknown. Here we measure (i) 13 plant cell-wall degrading enzymes in the fungus garden microbial consortium of the ambrosia beetle Xyleborinus saxesenii, including its primary fungal symbionts, in three compartments of laboratory maintained nests, at different time points after gallery foundation and (ii) four specific enzymes that may be either insect or microbially derived in X. saxesenii adult and larval individuals. Results We discovered that the activity of cellulases in ambrosia fungus gardens is relatively small compared to the activities of other cellulolytic enzymes. Enzyme activity in all compartments of the garden was mainly directed towards hemicellulose carbohydrates such as xylan, glucomannan and callose. Hemicellulolytic enzyme activity within the brood chamber increased with gallery age, whereas irrespective of the age of the gallery, the highest overall enzyme activity were detected in the gallery dump material expelled by the beetles. Interestingly endo-��-1,3(4)-glucanase activity capable of callose degradation was identified in whole-body extracts of both larvae and adult X. saxesenii, whereas endo-��-1,4-xylanase activity was exclusively detected in larvae. Conclusion Similar to closely related fungi associated with bark beetles in phloem, the microbial symbionts of ambrosia beetles hardly degrade cellulose. Instead, their enzyme activity is directed mainly towards comparatively more easily accessible hemicellulose components of the ray-parenchyma cells in the wood xylem. Furthermore, the detection of xylanolytic enzymes exclusively in larvae (which feed on fungus colonized wood) and not in adults (which feed only on fungi) indicates that only larvae (pre-) digest plant cell wall structures. This implies that in X. saxesenii and likely also in many other ambrosia beetles, adults and larvae do not compete for the same food within their nests - in contrast, larvae increase colony fitness by facilitating enzymatic wood degradation and fungus cultivation.

Romany Families in Romania: Intelligence and Personality of Children Cross-cultural and Specific Problems of Development

Psychogenetic research has emphasised the influence of social factors on a child's intellectual development. In her work, Ms. Dumitrascu examines two such factors; family size and order of birth. However, since these formal parameters tend to be unstable, other more informal factors should be taken into consideration. Of these, perhaps the most interesting is the "style" of parental education, which Ms. Dumitrascu regards as an expression of national traditions at the family level. This educational style is culture dependent. Only a comparative, cross-cultural study can reveal the real mechanism through which educational style influences the development of a child's intellect and personality. Ms. Dumitrascu conducted an experimental cross-cultural study aimed at examining the effects of the family environment on a child's intellectual development. Three distinct populations were involved in her investigation, each having quite a distinct status in their geographical area; Romanians, Romanies (Gypsies) from Romania, and Russians from the Republic of Moldova. She presented her research in the form of a series of articles written in English totalling 85 pages, and also on disc. A significant difference was revealed between the intelligence of a child living in a large family, and that of a child with no brothers or sisters. In the case of Romany children, the gap is remarkably large. Ms. Dumitrascu concludes that the simultaneous action of several negative factors (low socio-economic status, large family size, socio-cultural isolation of a population) may delay child development. Subjected to such a precarious environment, Romany children do not seek self-realisation, but rather struggle to survive the hardship. Most of them remain out of civilisation. Unfortunately, adult Romanies seldom express any concern regarding their children's successful social integration. The school as main socialisation tool has no value for most parents. Ms. Dumitrascu argues the need for a major effort aimed at helping Romany's social integration. She hopes this project will be of some help for psychologists, social workers, teachers, and all those who are interested in the integration into society of minority groups.

Racism, Youth Violence and the New Right: A Comparative Study of the Political Transformation of Extremism in Hungary and Romania

This research focused on the re-emerging of national and minority identities and the concomitant hostilities emerging from them in Hungary and in Romania. In particular the findings indicate that extremist incidents against members of minority groups on the local level seem to follow patterns in publicised media events. Violent attacks by skinheads against Gypsies in Hungary are often isolated incidents but are also inadvertently supported by biased media coverage, hostile majority attitudes and stereotyped behaviour reproduced in the media. The research also indicates that extremism both in Hungary against Gypsies and in Romania against Hungarians is of three kinds: organised within the framework of extremist groups, state-supported violence (both real and symbolic), and isolated, local instances with a few perpetrators committing atrocities. However, and this is a positive development, with rising interethnic tensions and extremist attacks prevalent in Hungary and Romania, there is also a parallel emergence of a more sophisticated human and minority rights campaign to combat them.