Habitat requirements of the yellow-footed antechinus (Antechinus flavipes) in box–ironbark forest, Victoria, Australia

Understanding the habitat requirements of a species is critical for effective conservation-based management. In this study, we investigated the influence of forest structure on the distribution of the yellow-footed antechinus (Antechinus flavipes), a small dasyurid marsupial characteristic of dry forests on the inland side of the Great Dividing Range, Australia. Hair-sampling tubes were used to determine the occurrence of A. flavipes at 60 sites stratified across one of the largest remaining tracts of dry box–ironbark forest in south-eastern Australia. We considered the role of six potential explanatory variables: large trees, hollow-bearing trees, coppice hollows, logs, rock cover and litter. Logistic regression models were examined using an information-theoretic approach to determine the variables that best explained the presence or absence of the species. Hierarchical partitioning was employed to further explore relationships between occurrence of A. flavipes and explanatory variables. Forest structure accounted for a substantial proportion of the variation in occurrence of A. flavipes between sites. The strongest influence on the presence of A. flavipes was the cover of litter at survey sites. The density of hollow-bearing trees and rock cover were also positive influences. The conservation of A. flavipes will be enhanced by retention of habitat components that ensure a structurally complex environment in box–ironbark forests. This will also benefit the conservation of several threatened species in this dry forest ecosystem.

Experimental and numerical investigation of low pressure tube hydroforming on 409 stainless steel

Tube hydroforming has been widely used to produce automotive structural components due to the superior properties of the hydroformed parts in terms of their light weight and structural rigidity. Compared to the traditional manufacturing process for a closed-section member including stamping and followed by welding, tube-hydro forming leads to cost savings due to reduced tooling and material handling. However, the high pressure pumps and high tonnage press required in hydroforming, lead to increased capital investment reducing the cost benefits. This study explores low pressure tube hydro forming which reduces the internal fluid pressure and die closing force required to produce the hydroformed part. The experimental and numerical analysis was for low pressure hydro formed stainless steel tubes. Die filling conditions and thickness distributions are measured and critically analysed.

Tracheostomy decannulation failure rate following critical illness : a prospective descriptive study

Background : Tracheostomy is a well established and practical approach to airway management for patients requiring extended periods of mechanical ventilation or airway protection. Little evidence is available to guide the process of weaning and optimal timing of tracheostomy tube removal. Thus, decannulation decisions are based on clinical judgement. The aim of this study was to describe decannulation practice and failure rates in patients with tracheostomy following critical illness.

Methods : A prospective descriptive study was conducted of consecutive patients who received a tracheostomy at a tertiary metropolitan public hospital intensive care unit (ICU) between March 2002 and December 2006. Data were analysed using descriptive and inferential tests.

Results : Of the 823 decannulation decisions, there were 40 episodes of failed decannulation, a failure rate of 4.8%. These 40 episodes occurred in 35 patients: 31 patients failed once, 3 patients failed twice and 1 patient failed three times. There was no associated mortality. Simple stoma recannulation was required in 25 episodes, with none of these patients readmitted to ICU. Translaryngeal intubation and readmission to ICU took place for the remaining 15 episodes. The primary reason for decannulation failure was sputum retention. Twenty-four patients (60%) failed decannulation within 24 h, with 14 of these occurring within 4 h.

Conclusions : Clinical assessments coupled with professional judgement to decide the optimal time to remove tracheostomy tubes in patients following critical illness resulted in a failure rate comparable with published data. Although reintubation and readmission to ICU was required in just over one third of failed decannulation episodes, there was no associated mortality or other significant adverse events. Our data suggest nurses need to exercise high levels of clinical vigilance during the first 24 h following decannulation, particularly the first 4 h to detect early signs of respiratory compromise to avoid adverse outcomes.

Solar energy use for energy savings in dairy processing plants

New Zealand is one of the world’s largest producers of dairy products and has a climate with high levels of solar radiation; however, the use of solar energy in the dairy processing industry has received limited attention. An examination of historical records found that the annual peak in New Zealand milk production and processing occurs at a time when solar radiation levels are increasing markedly. An F-Chart analysis was used to simulate the performance of large-area arrays of solar collectors and to determine their suitability for heating and cooling in a dairy processing environment. For the study four types of solar collectors were analysed: glazed flat plates, evacuated tubes, evacuated tubes with CPC reflectors and a building-integrated solar collector under development at the University of Waikato (UoW). It was found that of these echnologies, both flat plate and evacuated tubes with CPC reflectors could make useful heating and cooling contributions. Furthermore, the solar fraction was determined mainly by the collector area to storage volume ratio. Finally, it was found that the UoW building-integrated solar collector could make a significant contribution to energy use in dairies and may be an attractive future technology for the industry.

Composite crashworthy structures

This study presents an innovative finite element delamination model which successfully reproduced the experimental failure behaviour observed in axial crush testing. Tests were conducted on tubes manufactured by a novel composite curing process, resulting in the ability to cure tubular profiles in 7 minutes - 95% quicker than traditional autoclave curing.

Using omeprazole to link the components of the post-prandial alkaline tide in the spiny dogfish, Squalus acanthias

After a meal, dogfish exhibit a metabolic alkalosis in the bloodstream and a marked excretion of basic equivalents across the gills to the external seawater. We used the H⁺, K⁺-ATPase pump inhibitor omeprazole to determine whether these post-prandial alkaline tide events were linked to secretion of H⁺ (accompanied by Cl^–) in the stomach. Sharks were fitted with indwelling stomach tubes for pretreatment with omeprazole (five doses of 5mg omeprazole per kilogram over 48 h) or comparable volumes of vehicle (saline containing 2% DMSO) and for sampling of gastric chyme. Fish were then fed an involuntary meal by means of the stomach tube consisting of minced flatfish muscle (2% of body mass) suspended in saline (4% of body mass total volume). Omeprazole pretreatment delayed the post-prandial acidification of the gastric chyme, slowed the rise in Cl^– concentration of the chyme and altered the patterns of other ions, indicating inhibition of H⁺ and accompanying Cl^– secretion. Omeprazole also greatly attenuated the rise in arterial pH and bicarbonate concentrations and reduced the net excretion of basic equivalents to the water by 56% over 48h. Arterial blood CO₂ pressure and plasma ions were not substantially altered. These results indicate that elevated gastric H⁺ secretion (as HCl) in the digestive process is the major cause of the systemic metabolic alkalosis and the accompanying rise in base excretion across the gills that constitute the alkaline tide in the dogfish.

Crash investigation of side intrusion beam during high and low pressure tube hydroforming

Advanced high strength steels (AHSS), in particular, are an attractive group materials, offering higher strength for improved energy absorption and the opportunity to reduce weight through the use of thinner gauges. High pressure tube hydroforming (HPTH) has been used to produce safety components for these steels, but it is expensive. Low pressure tube hydroforming (LPTH) is a lower cost alternative to form the safety components in the car. The side intrusion beam is the second most critical part after front rail in the car structure for passenger safety during crash. The forming as well as crash behaviour of a square side intrusion beam from both processes was investigated using numerical simulation. This paper investigated the interaction between the forming and crash response of these materials in order to evaluate their potential for use in vehicle design for crashworthiness. The energy absorption characteristics of the different tubes were calculated and the results from the numerical analyses compared for both hydroforming process.

Haptic guidance for microrobotic intracellular injection

The ability for a bio-operator to utilise a haptic device to manipulate a microrobot for intracellular injection offers immense benefits. One significant benefit is for the bio-operator to receive haptic guidance while performing the injection process. In order to address this, this paper investigates the use of haptic virtual fixtures for cell injection and proposes a novel force field virtual fixture. The guidance force felt by the bio-operator is determined by force field analysis within the virtual fixture. The proposed force field virtual fixture assists the bio-operator when performing intracellular injection by limiting the micropipette tip's motion to a conical volume as well as recommending the desired path for optimal injection. A virtual fixture plane is also introduced to prevent the bio-operator from moving the micropipette tip beyond the deposition target inside the cell. Simulation results demonstrate the operation of the guidance system.

Protein electrochemistry using aligned carbon nanotube arrays

The remarkable electrocatalytic properties and small size of carbon nanotubes make them ideal for achieving direct electron transfer to proteins, important in understanding their redox properties and in the development of biosensors. Here, we report shortened SWNTs can be aligned normal to an electrode by self-assembly and act as molecular wires to allow electrical communication between the underlying electrode and redox proteins covalently attached to the ends of the SWNTs, in this case, microperoxidase MP-11. The efficiency of the electron transfer through the SWNTs is demonstrated by electrodes modified with tubes cut to different lengths having the same electron-transfer rate constant.

A non-darcian numerical modeling in domed enclosures filled with heat-generating porous media

Numerical study of the natural-convection flow and heat transfer in a dome-shaped, heat-generating, porous enclosure is considered. The general conic equation for the top dome is used to consider various conical top sections such as circular, elliptical, parabolic, and hyperbolic. The individual effect of fluid Rayleigh, Darcy, and heat-generating parameters on flow patterns and heat transfer rates are analyzed and presented. The predicted results show that the heat-generating parameter has the most significant contribution toward the growth of bicellular core flow. Moreover, there is significant change in temperature distribution in comparison to rectangular enclosures, due to the existence of the domed-shape top adiabatic cover. The results also show that, regardless of Darcy and Rayleigh values, a flat adiabatic top cover tends to yield the highest value of Nusselt number, followed by circular, elliptical, parabolic, and hyperbolic top covers, respectively.

The male germ unit of Rhododendron : quantitative cytology, three-dimensional reconstruction, isolation and detection using fluorescent probes

The sperm cells of Rhododendron laetum and R. macgregoriae differentiate within the pollen tube about 24 h after germination in vitro. Threedimensional reconstruction shows that the sperm cells are paired together, and both have extensions that link with the tube nucleus, forming a male germ unit. Quantitative analysis shows that the sperm cells in each pair differ significantly in surface area, but not in cell volume nor in numbers of mitochondria or plastids. When isolated from pollen tubes by osmotic shock, the sperm cells became ellipsoidal and surrounded by their own plasma membrane, while a proportion remained in pairs linked by the inner tube plasma membrane. Both generative and sperm cells are visualized in pollen tube preparations by immunofluorescence with anti-tubulin and anti-actin monoclonal antibodies (MAbs) combined with H33258 fluorescence of the nuclei. Video-image processing shows the presence of an axial microtubule cage in the generative cells, and some microtubules are present in the cytoplasmic extensions that clasp the tube nucleus. Following sperm cell division, the extensive phragmoplast between the sperm nuclei is partitioned by the plasma membranes.

Localisation of allergens in ryegrass pollen and in airborne micronic particles

In Melbourne, Australia, grass pollen allergens, especially from ryegrass, are a major cause of allergic hayfever and asthma. This review outlines recent developments in our understanding of how grass pollen allergens find their way into the atmosphere and how they are transported in particulate form. Much of this work has relied on antibody technology in immunological and immunocytochemical investigations. The localisation of allergens in situ has proved difficult due to their water-soluble character. Recently, allergens have been localised in developing ryegrass pollen by dryfixation, rapid-freeze and freeze-substitution techniques. This involved anthers being substituted in a mixture of aldehydes, organic solvents, and 2,2-dimethoxypropane. Incubation in dimethylsulfoxide prior to embedding in LR Gold resin provided good infiltration with freeze-substituted material. Immunogold-labelled sections show that the major allergens, Lol p 1 and Lol p 5, are synthesised in the pollen cytoplasm from the early bicellular stage, soon after the first starch granules are formed. From the early tricellular stage, Lol p 5 moves into the starch granules where it remains until maturity. Lol p 1 is localised in the cytoplasm of mature pollen grains. The incidence of airborne grass pollen, as measured in pollen traps, correlates with hayfever symptoms. Forecasting models which rely on rainfall and temperature data have been produced for the grass pollen (daily and seasonal) counts in Melbourne. Research over the past six years has shed light on the causes of grass-pollen-induced asthma. Micronic particles in the atmosphere may be starch granules originating from pollen grains osmotically ruptured by rainwater. Ultrastructural and immunological characterisation of micronic particles collected from outdoor air filters confirm the presence of airborne starch granules. These are loaded with grass pollen allergens, occur in the atmosphere especially after rainfall, and correlate significantly with instances of allergic asthma. Diesel particles might also play a role in the transmission of grass pollen allergens and thus become an extra asthma trigger. A variation in the mode of release of micronic particles occurs in other species, such as birch, where such particles are derived from burst birch pollen tubes. These particles are positive for Bet v 1 and are starch granules which are released into the atmosphere after light rain as a result of pollen germination on, e.g., leaves. After subsequent rupture of pollen tubes their contents are released when conditions become drier.

Isolation of sperms from the pollen tube of flowering plants during fertilization

Sperm cells have been isolated from pollen tubes growing in style segments of the dicotlyledon Rhododendron macgregoriae and the monocotyledon Gladiolus gandavensis by the in vivo/in vitro method at various stages of fertilization. Pollen tubes emerged from the cut end of the style into agar medium, and more than 95% contained sperm cells. Sperm cells were released from the pollen tubes by osmotic shock or by placing styles in wall-degrading enzymes: 0.5% macerozyme and 1% cellulase. The isolated sperms were ellipsoidal protoplasts of diameter about 2 × 3 micrometers in Gladiolus and about 3 × 4 micrometers in Rhododendron. After isolation, a proportion of the sperm cells occurred in pairs linked at one end by finger-like connections. The pairs of isolated sperms were dimorphic in terms of surface area and volume. By cutting the styles at various positions and times after pollination, the potential exists to detect changes in sperm gene expression associated with fertilization.

Source of Bet v 1 loaded inhalable particles from birch revealed

Allergenic proteins present in pollen grains, when inhaled, interact with the airways to cause an attack of asthma in susceptible humans. In one system, grass pollen grains rupture osmotically in rainfall, releasing allergen-containing inhalable particles into the atmosphere. In contrast, birch tree pollen grains do not rupture under these conditions, yet the major allergen, Bet v 1, has been detected in the atmosphere in inhalable particles of unknown origin. It is possible that Bet v 1 may diffuse from intact settled pollen grains and the allergenic material may again become airborne, interacting with settled fine particles from other sources prior to resuspension. This study investigates the mechanism for the release of birch pollen allergen-containing inhalable particles from pollen grains. We propose the hypothesis that (1) airborne birch pollen grains settle on nearby leaf surfaces; (2) then, following light rainfall, the grains germinate and, (3) later, pollen tubes burst, releasing inhalable particles carrying Bet v 1 into the atmospheric aerosol.   We used microscopic analyses of pollen behaviour following anther opening, a Burkard volumetric trap for pollen counts and a high volume air sampler with a two-stage cascade impactor for quantitative immunochemical analyses of Bet v 1. On dry days of high birch pollen count (48 grains/m3, 1.5 ng/m3 of Bet v 1), we found that the surfaces of birch leaves became coated with pollen. This ”pollen rain” is a source of secondary emission of allergens into the atmosphere. We observed that following light rainfall (<1 mm per day), about 80% of the birch pollen grains germinated, producing pollen tubes, especially in the sticky surface secretions of leaf glands. These pollen tubes may grow up to 300 μm in length prior to rupturing, each releasing about 400 starch granules coated with allergen molecules that may, after drying, be dispersed into the aerosol. On these days following light rainfall, the highest atmospheric levels of Bet v 1 (1.18 ng/m3) are associated with inhalable particles. Following heavy rainfall, both pollen and inhalable particles are washed from the atmosphere. Immunoprinting studies show that Bet v 1 is associated with starch granules rather than the smaller orbicules. Bet v 1 is present in the atmosphere in large particles, i.e. in particular pollen grains and in inhalable particles, i.e. in particular starch granules.

Needleless electrospinning : developments and performances

Electrospinning technique has attracted a lot of interests recently, although it was invented in as early as 1934 by Anton (Anton, 1934). A basic electrospinning setup normally comprises a high voltage power supply, a syringe needle connected to power supply, and a counter-electrode collector as shown in Fig. 1. During electrospinning, a high electric voltage is applied to the polymer solution, which highly electrifies the solution droplet at the needle tip (Li & Xia, 2004). As a result, the solution droplet at the needle tip receives electric forces, drawing itself toward the opposite electrode, thus deforming into a conical shape (also known as “Taylor cone” (Taylor, 1969)). When the electric force overcomes the surface tension of the polymer solution, the polymer solution ejects off the tip of the “Taylor cone” to form a polymer jet. The charged jet is stretched by the strong electric force into a fine filament. Randomly deposited dry fibers can be obtained on the collector due to the evaporation of solvent in the filament. There are many factors affecting the electrospinning process and fiber properties, including polymer materials (e.g. polymer structure, molecular weight, solubility), solvent (e.g. boiling point, dielectric properties), solution properties (e.g. viscosity, concentration, conductivity, surface tension), operating conditions (e.g. applied voltage, collecting distance, flow rate), and ambient environment (e.g. temperature, gas environment, humidity).