A framework for comparing pollinator performance: effectiveness and efficiency

Measuring pollinator performance has become increasingly important with emerging needs for risk assessment in conservation and sustainable agriculture that require multi-year and multi-site comparisons across studies. However, comparing pollinator performance across studies is difficult because of the diversity of concepts and disparate methods in use. Our review of the literature shows many unresolved ambiguities. Two different assessment concepts predominate: the first estimates stigmatic pollen deposition and the underlying pollinator behaviour parameters, while the second estimates the pollinator’s contribution to plant reproductive success, for example in terms of seed set. Both concepts include a number of parameters combined in diverse ways and named under a diversity of synonyms and homonyms. However, these concepts are overlapping because pollen deposition success is the most frequently used proxy for assessing the pollinator’s contribution to plant reproductive success. We analyse the diverse concepts and methods in the context of a new proposed conceptual framework with a modular approach based on pollen deposition, visit frequency, and contribution to seed set relative to the plant’s maximum female reproductive potential. A system of equations is proposed to optimize the balance between idealised theoretical concepts and practical operational methods. Our framework permits comparisons over a range of floral phenotypes, and spatial and temporal scales, because scaling up is based on the same fundamental unit of analysis, the single visit.

Using an additive to control the electrospinning of fibres of poly(epsilon-caprolactone)

Electrospinning is a route to polymer fibres with diameters considerably smaller than available from most fibre-producing techniques. We explore the use of a low molecular weight compound as an effective control additive during the electrospinning of poly(epsilon-caprolactone). This approach extends the control variables for the electrospinning of nanoscale fibres from the more usual ones such as the polymer molecular weight, solvent and concentration. We show that through the use of dual solvent systems, we can alter the impact of the additive on the electrospinning process so that finer as well as thicker fibres can be prepared under otherwise identical conditions. As well as the size of the fibres and the number of beads, the use of the additive allows us to alter the level of crystallinity as well as the level of preferred orientation of the poly(epsilon-caprolactone) crystals. This approach, involving the use of a dual solvent and a low molar mass compound, offers considerable potential for application to other polymer systems. (C) 2010 Society of Chemical Industry

Chemistry and biology of maculalactone A from the marine cyanobacterium Kyrtuthrix maculans

Maculalactone A is the most abundant secondary metabolite in Kyrtuthrix maculans, a marine cyanobacterium found in the mid-high shore of moderately exposed to sheltered rocky shores in Hong Kong and South East Asia. This species appears to survive as pure colonies forming distinct black zones on the rock. Maculalactone A may provide K. maculans with a chemical defense against several marine organisms, including the common grazer, Chlorostoma argyrostoma and settlement by larvae of the barnacles, Tetraclita japonica, Balanus amphitrite and Ibla cumingii. The natural concentration of maculalactone A varied with season and also with tidal height on the shore and although a strong positive linear correlation was observed between maculalactone A concentration and herbivore grazing pressure, manipulative experiments demonstrated that grazing pressure was not directly responsible for inducing the biosynthesis of this metabolite. The potential of maculalactone A as a natural marine anti-fouling agent (i.e. as an alternative to environmentally-damaging copper- and tin-based anti-fouling paints) was investigated after achieving a gram-scale synthesis of this compound. Preliminary field trials with anti-fouling paints which contained synthetic maculalactone A as the active principle have confirmed that this compound seems to have a specific activity against molluscan settlers.

Self-assembly of a designed amyloid peptide containing the functional thienylalanine unit

The self-assembly of a peptide based on a sequence from the amyloid beta peptide but incorporating the non-natural amino acid beta-2-thienylalanine (2-Thi) has been investigated in aqueous and methanol solutions. The peptide AAKLVFF was used as a design motif, replacing the phenylalanine residues (F) with 2-Thi units to yield (2-Thi)(2-Thi)VLKAA. The 2-Thi residues are expected to confer interesting electronic properties due to charge delocalization and pi-stacking. The peptide is shown to form beta-sheet-rich amyloid fibrils with a twisted morphology, in both water and methanol solutions at sufficiently high concentration. The formation of a self-assembling hydrogel is observed at high concentration. Detailed molecular modeling using molecular dynamics methods was performed using NOE constraints provided by 2D-NMR experiments. The conformational and charge properties of 2-Thi were modeled using quantum mechanical methods, and found to be similar to those previously reported for the beta-3-thienylalanine analogue. The molecular dynamics simulations reveal well-defined folded structures (turn-like) in dilute aqueous solution, driven by self-assembly of the hydrophobic aromatic units, with charged lysine groups exposed to water.

Influence of the solvent on the self-assembly of a modified amyloid beta peptide fragment. II. NMR and computer simulation investigation

The conformation of a model peptide AAKLVFF based on a fragment of the amyloid beta peptide A beta 16-20, KLVFF, is investigated in methanol and water via solution NMR experiments and Molecular dynamics computer simulations. In previous work, we have shown that AAKLVFF forms peptide nanotubes in methanol and twisted fibrils in water. Chemical shift measurements were used to investigate the solubility of the peptide as a function of concentration in methanol and water. This enabled the determination of critical aggregation concentrations, The Solubility was lower in water. In dilute solution, diffusion coefficients revealed the presence of intermediate aggregates in concentrated solution, coexisting with NMR-silent larger aggregates, presumed to be beta-sheets. In water, diffusion coefficients did not change appreciably with concentration, indicating the presence mainly of monomers, coexisting with larger aggregates in more concentrated solution. Concentration-dependent chemical shift measurements indicated a folded conformation for the monomers/intermediate aggregates in dilute methanol, with unfolding at higher concentration. In water, an antiparallel arrangement of strands was indicated by certain ROESY peak correlations. The temperature-dependent solubility of AAKLVFF in methanol was well described by a van't Hoff analysis, providing a solubilization enthalpy and entropy. This pointed to the importance of solvophobic interactions in the self-assembly process. Molecular dynamics Simulations constrained by NOE values from NMR suggested disordered reverse turn structures for the monomer, with an antiparallel twisted conformation for dimers. To model the beta-sheet structures formed at higher concentration, possible model arrangements of strands into beta-sheets with parallel and antiparallel configurations and different stacking sequences were used as the basis for MD simulations; two particular arrangements of antiparallel beta-sheets were found to be stable, one being linear and twisted and the other twisted in two directions. These structures Were used to simulate Circular dichroism spectra. The roles of aromatic stacking interactions and charge transfer effects were also examined. Simulated spectra were found to be similar to those observed experimentally.(in water or methanol) which show a maximum at 215 or 218 nm due to pi-pi* interactions, when allowance is made for a 15-18 nm red-shift that may be due to light scattering effects.

Actinomyces coleocanis sp. nov., from the vagina of a dog

A hitherto undescribed Actinomyces-like bacterium was isolated from the vagina of a dog. Biochemical testing and PAGE analysis of whole-cell proteins indicated that the isolate was phenotypically different from previously described Actinomyces species and related taxa. Sequencing of 165 rRNA showed that the unknown bacterium was distinct from all currently known Actinomyces species. Phylogenetically, the unidentified organism displayed a specific association with Actinomyces europaeus, but a sequence divergence of > 5% demonstrated that it represents a distinct species. Based on both phenotypic and 165 rRNA sequence considerations, it is proposed that the unknown strain from a dog be classified as a novel species, Actinomyces coleocanis sp. nov. The type strain is CCUG 41708T (= CIP 106873T).

Arcanobacterium hippocoleae sp. nov., from the vagina of a horse

A polyphasic taxonomic study was performed on a previously unidentified gram-positive, facultatively anaerobic, diphtheroid-shaped organism isolated from a vaginal discharge of a horse. Comparative 16S rRNA gene sequencing demonstrated that the strain was a member of the genus Arcanobacterium, but sequence divergence values of >4% with described species of this genus (viz: Arcanobacterium haemolyticum, Arcanobacterium bernardiae, Arcanobacterium phocae, Arcanobacterium pluranimalium and Arcanobacterium pyogenes) demonstrated that the isolate represented a novel species. The unknown bacterium was readily distinguished from other Arcanobacterium species by biochemical tests. Based on phylogenetic and phenotypic evidence, it is proposed that the unknown bacterium be classified as Arcanobacterium hippocoleae sp. nov. The type strain of A. hippocoleae is CCUG 44697T (= CIP 106850T).

Arthrobacter nasiphocae sp. nov., from the common seal (Phoca vitulina)

An unknown gram-positive, catalase-positive, strictly aerobic, rod-shaped bacterium was isolated from the nasal cavities of two common seals. Chemical analysis revealed the presence in the bacterium of a hitherto unknown cell-wall murein [type: L-Lys-L-Ala2-Gly(2-3)-L-Ala (Gly)]. Comparative 16S rRNA gene sequencing showed that the unidentified rod was related to the Arthrobacter group of organisms, although sequence divergence values of >3% from established members of this genus indicated that it represents a novel species. On the basis of phenotypic and phylogenetic considerations, it is proposed that the unknown bacterium from seals (Phoca vitulina) be classified as a novel species, Arthrobacter nasiphocae sp. nov. The type strain of Arthrobacter nasiphocae is CCUG 42953T.

Characterization of a Gemella-like organism isolated from an abscess of a rabbit: description of Gemella cunicula sp. nov.

An unknown Gram-positive, catalase-negative, ovoid-shaped bacterium isolated from the submandibular abscess of a rabbit was subjected to a polyphasic taxonomic analysis. Comparative 16S rRNA gene sequencing demonstrated the unknown coccus represents a new subline within the genus Gemella. The unknown isolate was readily distinguished from other recognized members of the genus Gemella, namely Gemella haemolysans, Gemella bergeri, Gemella morbillorum, Gemella palaticanis and Gemella sanguinis, by biochemical tests and electrophoretic analysis of whole-cell proteins. Based on both phylogenetic and phenotypic evidence, it is proposed that the unknown bacterium is classified in the genus Gemella as Gemella cuniculi sp. nov. The type strain is CCUG 42726T.

Actinomyces canis sp. nov., isolated from dogs

Three strains of a previously undescribed catalase-positive Actinomyces-like bacterium were isolated from dogs. Biochemical testing and PAGE analysis of whole-cell proteins indicated that the strains were phenotypically highly related to each other but different from previously described Actinomyces and Arcanobacterium species. Sequencing of 16S rRNA showed that the unknown bacterium represents a new subline within a cluster of species which includes Actinomyces hyovaginalis, Actinomyces georgiae, Actinomyces meyeri, Actinomyces odontolyticus, Actinomyces radingae and Actinomyces turicensis. On the basis of phenotypic evidence and 16S rRNA sequence divergence levels (greater than 5% with recognized Actinomyces species) it is proposed that the unknown strains from canine sources be classified as a new species with the name Actinomyces canis sp. nov. The type strain of Actinomyces canis is CCUG 41706T (= CIP 106351T).

Vagococcus fessus sp. nov., isolated from a seal and a harbour porpoise

A polyphasic taxonomic study was performed on two strains of an unknown Gram-positive, catalase-negative, coccus-shaped bacterium isolated from a dead seal and a harbour porpoise. Comparative 16S rRNA gene sequencing demonstrated that the unknown bacterium represents a new subline within the genus Vagococcus close to, but distinct from, Vagococcus fluvialis, Vagococcus lutrae and Vagococcus salmoninarum. The unknown bacterium was readily distinguished from the three currently recognized Vagococcus species by biochemical tests and electrophoretic analysis of whole-cell proteins. Based on phylogenetic and phenotypic evidence, it is proposed that the unknown bacterium be classified as a new species, Vagococcus fessus. The type strain of Vagococcus fessus is CCUG 41755T.