Preparation and characterization on cellulose nanofiber film

In this study, cellulose nanofibers were obtained from wood pulp using a chemo-mechanical method and thin films were made of these cellulose nanofibers. The morphology of the films was studied by scanning electron microscopy (SEM). SEM image analysis revealed that the films were composed of cellulose nanofibers with an average diameter of around 32 nm. Other properties were also characterized, including the degree of crystallinity by X-ray diffraction, chemical bonding by infrared attenuated total reflectance analysis, and thermal properties by differential scanning calorimetry. The foldable, strong, and optically translucent cellulose nanofiber films thus obtained have many potential applications as micro/nano electronic devices, biosensors and filtration media, etc.

Design earthquake ground motion prediction for Perth metropolitan area with microtremor measurements for site characterization

Perth is the largest city in Western Australia and home to three-quarters of the state's residents. In recent decades, there have been a lot of earthquake activities just east of Perth in an area known as the South-West Seismic Zone. Previous numerical results of site response analyses based on limited available geology information for PMA indicated that Perth Basin might amplify the bedrock motion by more than 10 times at some frequencies and at some sites. Hence, more detailed studies on site characterization and amplification are necessary. The microtremor method using spatial autocorrelation (SPAC) processing is a useful tool for gaining thickness and shear wave velocity (SWV) of sediments and has been adopted in many previous studies. In this study, the response spectrum of rock site corresponding to the 475-year return period for PMA is defined according to the probabilistic seismic hazard analysis (PSHA) based on the latest ground motion attenuation model of Southwest Western Australia. Site characterization in PMA is performed using two microtremor measurements, namely SPAC technique and H/V method. The clonal selection algorithm (CSA) is introduced to perform direct inversion of SPAC curves to determine the soil profiles of representative PMA sites investigated in this study. Using the simulated bedrock motion as input, the responses of the soil sites are estimated using numerical method based on the shear-wave velocity vs. depth profiles determined from the SPAC technique. The response spectrum of the earthquake ground motion on surface of each site is derived from the numerical results of the site response analysis, and compared with the respective design spectrum defined in the Australian Earthquake Loading Code. The comparison shows that the code spectra are conservative in the short period range, but may slightly underestimate the response spectrum at some long period range.

Identification and characterization of a new class of cognitive enhancers based on inhibition of insulin-regulated aminopeptidase

Approximately one-quarter of people over the age of 65 are estimated to suffer some form of cognitive impairment, underscoring the need for effective cognitive-enhancing agents. Insulin-regulated aminopeptidase (IRAP) is potentially an innovative target for the development of cognitive enhancers, as its peptide inhibitors exhibit memory-enhancing effects in both normal and memory-impaired rodents. Using a homology model of the catalytic domain of IRAP and virtual screening, we have identified a class of nonpeptide, small-molecule inhibitors of IRAP. Structure-based computational development of an initial "hit" resulted in the identification of two divergent families of compounds. Subsequent medicinal chemistry performed on the highest affinity compound produced inhibitors with nanomolar affinities (Ki 20–700 nM) for IRAP. In vivo efficacy of one of these inhibitors was demonstrated in rats with an acute dose (1 nmol in 1 µl) administered into the lateral ventricles, improving performance in both spatial working and recognition memory paradigms. We have identified a family of specific IRAP inhibitors that is biologically active which will be useful both in understanding the physiological role of IRAP and potentially in the development of clinically useful cognitive enhancers. Notably, this study also provides unequivocal proof of principal that inhibition of IRAP results in memory enhancement.

Characterization and evaluation of BaCo0.7Fe0.2Nb0.1O3−δ as a cathode for proton-conducting solid oxide fuel cells

This study characterizes BaCo0.7Fe0.2Nb0.1O3−δ (BCFN) perovskite oxide and evaluates it as a potential cathode material for proton-conducting SOFCs with a BaZr0.1Ce0.7Y0.2O3-δ (BZCY) electrolyte. A four-probe DC conductivity measurement demonstrated that BCFN has a modest electrical conductivity of 2–15 S cm−1 in air with p-type semiconducting behavior. An electrical conductivity relaxation test showed that BCFN has higher Dchem and Kchem than the well-known Ba0.5Sr0.5Co0.8Fe0.2O3−δ oxide. In addition, it has relatively low thermal expansion coefficients (TECs) with values of 18.2 × 10−6 K−1 and 14.4 × 10−6 K−1 at temperature ranges of 30–900 °C and 30–500 °C, respectively. The phase reaction between BCFN and BZCY was investigated using powder and pellet reactions. EDX and XRD characterizations demonstrated that BCFN had lower reactivity with the BZCY electrolyte than strontium-containing perovskite oxides such as SrCo0.9Nb0.1O3-δ and Ba0.6Sr0.4Co0.9Nb0.1O3−δ. The impedance of BCFN was oxygen partial pressure dependent. Introducing water into the cathode atmosphere reduced the size of both the high-frequency and low-frequency arcs of the impedance spectra due to facilitated proton hopping. The cathode polarization resistance and overpotential at a current density of 100 mA cm−2 were 0.85 Ω cm−2 and 110 mV in dry air, which decreased to 0.43 Ω cm−2 and 52 mV, respectively, in wet air (∼3% H2O) at 650 °C. A decrease in impedance was also observed with polarization time; this was possibly caused by polarization-induced microstructure optimization. A promising peak power density of ∼585 mW cm−2 was demonstrated by an anode-supported cell with a BCFN cathode at 700 °C.

Characterization of mucus-associated proteins from abalone (Haliotis) – candidates for chemical signaling

Living in groups is a widespread phenomenon in the animal kingdom. For free-spawning aquatic animals, such as the abalone (Haliotis), being in the close proximity to potential mating partners enhances reproductive success. In this study, we investigated whether chemical cues could be present in abalone mucus that enable species-specific aggregation. A comparative MS analysis of mucus obtained from trailing or fixed stationary Haliotis asinina, and from seawater surrounding aggregations, indicated that water-soluble biomolecules are present and that these can stimulate sensory activity in conspecifics. Purified extracts of trail mucus contain at least three small proteins [termed H. asinina mucus-associated proteins (Has-MAPs)-1–3], which readily diffuse into the surrounding seawater and evoke a robust cephalic tentacle response in conspecifics. Mature Has-MAP-1 is approximately 9.9 kDa in size, and has a glycine-rich N-terminal region. Has-MAP-2 is approximately 6.2 kDa in size, and has similarities to schistosomin, a protein that is known to play a role in mollusc reproduction. The mature Has-MAP-3 is approximately 12.5 kDa in size, and could only be identified within trail mucus of animals outside of the reproductive season. All three Has-MAP genes are expressed at high levels within secretory cells of the juvenile abalone posterior pedal gland, consistent with a role in scent marking. We infer from these results that abalone mucus-associated proteins are candidate chemical cues that could provide informational cues to conspecifics living in close proximity and, given their apparent stability and hydrophilicity, animals further afield.

Building genetic networks using relatedness information : a novel approach for the estimation of dispersal and characterization of group structure in social animals

Natal dispersal is an important life history trait driving variation in individual fitness, and therefore, a proper understanding of the factors underlying dispersal behaviour is critical to many fields including population dynamics, behavioural ecology and conservation biology. However, individual dispersal patterns remain difficult to quantify despite many years of research using direct and indirect methods. Here, we quantify dispersal in a single intensively studied population of the cooperatively breeding chestnut-crowned babbler (Pomatostomus ruficeps) using genetic networks created from the combination of pairwise relatedness data and social networking methods and compare this to dispersal estimates from re-sighting data. This novel approach not only identifies movements between social groups within our study sites but also provides an estimation of immigration rates of individuals originating outside the study site. Both genetic and re-sighting data indicated that dispersal was strongly female biased, but the magnitude of dispersal estimates was much greater using genetic data. This suggests that many previous studies relying on mark–recapture data may have significantly underestimated dispersal. An analysis of spatial genetic structure within the sampled population also supports the idea that females are more dispersive, with females having no structure beyond the bounds of their own social group, while male genetic structure expands for 750 m from their social group. Although the genetic network approach we have used is an excellent tool for visualizing the social and genetic microstructure of social animals and identifying dispersers, our results also indicate the importance of applying them in parallel with behavioural and life history data.

Isolation and characterization of 12 polymorphic tetranucleotide microsatellite loci in the apostlebird (Struthidea cinerea)

The apostlebird (Struthidea cinerea) is an Australian endemic passerine belonging to the Corcoracidae family. The species is highly gregarious throughout the year and the name of the species refers to the apparent prevalence of social groups of around 12 birds. The species is becoming a model system for the study of sociality in vertebrates, which will require the analysis of relatedness, paternity and maternity. We characterize 12 microsatellite loci tested for polymorphism on 25 individuals from a population in western New South Wales, Australia. The number of alleles ranged from 4 to 9 per locus. Expected heterozygosities ranged from 0.69 to 0.88. This microsatellite panel will facilitate future studies that will advance our understanding of dispersal processes, inbreeding avoidance and reproductive skew in social animals.

Synthesis and characterization of nanocrystalline hexagonal boron carbo-nitride under high temperature and high pressure

A study of the synthesis of hexagonal boron carbo-nitride (h-BCN) compounds via a two-step high-temperature and high-pressure (HTHP) technique using melamine (C 3N 6H 6) and boron oxide (B 2O 3) as raw materials is presented. An amorphous BCN precursor was prepared at 1000K under vacuum in a resistance furnace and then single-phase h-BCN nanocrystalline was synthesized at 1600K and 5.1GPa in a multi-anvil apparatus. X-ray diffraction (XRD) and transmission electron microscopy (TEM) indicated that the final products were pure h-BCN crystals with the lattice constants a ≤ 0.2510nm and c ≤ 0.6690nm. The average grain size was about 150nm. X-ray photoelectron spectroscopy (XPS) results confirmed the occurrence of bonding between C-C, C-N, C-B and N-B atoms. Raman scattering analysis suggested that there were three strong Raman bands centered at 1359, 1596 and 1617cm -1, respectively. The band at 1617cm -1 was considered to be consistent with the characteristic Raman peak of h-BCN.

Characterization of the improvement in depressive symptoms following Bariatric surgery

Background : The Beck Depression Inventory (BDI) has been frequently employed as a measure of depression in studies of obesity, with the majority of studies reporting an improvement in scores following weight loss. Given the potential similarity in obesity-related and depressive symptoms, it is uncertain whether all components of depression would improve equally with weight loss.

Method : The study included obese patients who had undergone laparoscopic adjustable gastric banding (LAGB) surgery and had completed BDIs at baseline and 1 year after surgery. Two groups of patients were included, a general background group (N = 191, mean age = 41 ± 9, mean BMI = 43 ± 8) and a group identified as experiencing elevated depressive symptoms based on BDI scores ≥23 (EDS group; (N = 67, mean age = 40 ± 9, mean BMI = 45 ± 7).

Results : Overall, BDI scores fell for both groups, background group at baseline 17 ± 9–8 ± 7 at 1 year and for the EDS group at baseline 30 ± 5–14 ± 10 at 1 year. Patient scores on the negative self-attitude subscale were significantly greater than the two other subscales and showed the greatest improvement 1 year following LAGB. Preexisting antidepressant therapy had little or no association on the BDI scores or on its change following weight loss.

Conclusion : High rates of depression are continually reported in obesity, as is a remarkable decrease in depressive symptoms following weight loss. Negative attitudes towards one’s self appears to be driving elevated BDI scores rather than the overlap in physical symptoms between obesity and depression.

Synthesis and characterization of tin dioxide core-shell structure nanowires

In this study, one-dimensional and quasi-one-dimensional tin dioxide nanowires and nan-owalls were fabricated by the use of the chemical vapor deposition technique. It was demonstrated that the growth and nanostructure of tin oxide can be controlled by varying the thickness of gold layer and the partial pressure of vapor at growing sites. Nanowires with a core-shell structure, i.e., pure tin core and tin oxide shell, were synthesized from C-S_nO₂ powders at a mol ratio of C/S_nO₂=3/5 on both silicon and Lanthanum Strontium Co-balt Ferrite ceramic wafers through the vapor-solid mechanism. The conditions that are favorable to the growth of core-shell structure nanowires are investigated.

Functional characterization of the twin ZIP/SLC39 metal transporters, NpunF3111 and NpunF2202 in Nostoc punctiforme

The ZIP family of metal transporters is involved in the transport of Zn2+ and other metal cations from the extracellular environment and/or organelles into the cytoplasm of prokaryotes, eukaryotes and archaeotes. In the present study, we identified twin ZIP transporters, Zip11 (Npun_F3111) and Zip63 (Npun_F2202) encoded within the genome of the filamentous cyanobacterium, Nostoc punctiforme PCC73120. Sequence-based analyses and structural predictions confirmed that these cyanobacterial transporters belong to the SLC39 subfamily of metal transporters. Quantitative real-time (QRT)-PCR analyses suggested that the enzymes encoded by zip11 and zip63 have a broad allocrite range that includes zinc as well as cadmium, cobalt, copper, manganese and nickel. Inactivation of either zip11 or zip63 via insertional mutagenesis in N. punctiforme resulted in reduced expression of both genes, highlighting a possible co-regulation mechanism. Uptake experiments using 65Zn demonstrated that both zip mutants had diminished zinc uptake capacity, with the deletion of zip11 resulting in the greatest overall reduction in 65Zn uptake. Over-expression of Zip11 and Zip63 in an E. coli mutant strain (ZupT736::kan) restored divalent metal cation uptake, providing further evidence that these transporters are involved in Zn uptake in N. punctiforme. Our findings show the functional role of these twin metal uptake transporters in N. punctiforme, which are independently expressed in the presence of an array of metals. Both Zip11 and Zip63 are required for the maintenance of homeostatic levels of intracellular zinc N. punctiforme, although Zip11 appears to be the primary zinc transporter in this cyanobacterium, both ZIP's may be part of a larger metal uptake system with shared regulatory elements.

Morphometric and molecular characterization of the species of Uncinaria Frölich, 1789 (Nematoda) parasitic in the Australian fur seal Arctocephalus pusillus doriferus (Schreber), with notes on hookworms in three other pinniped hosts

This study presents morphological and molecular data on hookworms from the Australian fur seal Arctocephalus pusillus doriferus (Schreber) currently identified in Australian waters as Uncinaria hamiltoni Baylis, 1933. Additional specimens from the Australian sea lion Neophoca cinerea (Péron) and the New Zealand fur seal Arctocephalus forsteri (Lesson) from Australia, and the Southern elephant seal Mirounga leonina (Linnaeus) from Antarctica, were included. Using the internal transcribed spacer (ITS), hookworms from A. p. doriferus, N. cinerea and A. forsteri were found to be genetically similar but distinct from Uncinaria spp. found in M. leonina from Antarctica, as well as from Zalophus californianus (Lesson) and Callorhinus ursinus (Linnaeus) from California. Few morphological differences were detected between these taxa.

Preparation and characterization of novel chitosan-based microcapsule containing patchouli oil

A novel chitosan-based microcapsule containing patchouli oil was developed by a non-toxic procedure for the purpose of improving the stability of patchouli oil and achieving a durable controlled release effect. The microcapsules were characterized in case of morphology, particle size and size distribution, infrared spectrum, and the drug controlled-release properties of microcapsules were investigated under constant temperature of 25 °C. The results indicated that the microcapsules were spherical in shape with good dispersibility and smooth surface, and the particle size of microcapsules ranged from 1 to 10 ?m. The controlled-release of patchouli oil could still be remained about 60% in the microcapsules after 10 days, which demonstrated that the stability of patchouli oil were effectively improved after being encapsulated in microcapsules. It is believed that this study will not only provide a novel chitosan-based microcapsule production containing patchouli oil, but also promote the applications of microcapsule technology for improving the bioavailability of active volatile oils.

Interobserver reliability of classification and characterization of proximal humeral fractures: a comparison of two and three-dimensional CT

Interobserver reliability for the classification of proximal humeral fractures is limited. The aim of this study was to test the null hypothesis that interobserver reliability of the AO classification of proximal humeral fractures, the preferred treatment, and fracture characteristics is the same for two-dimensional (2-D) and three-dimensional (3-D) computed tomography (CT). Members of the Science of Variation Group--fully trained practicing orthopaedic and trauma surgeons from around the world--were randomized to evaluate radiographs and either 2-D CT or 3-D CT images of fifteen proximal humeral fractures via a web-based survey and respond to the following four questions: (1) Is the greater tuberosity displaced? (2) Is the humeral head split? (3) Is the arterial supply compromised? (4) Is the glenohumeral joint dislocated? They also classified the fracture according to the AO system and indicated their preferred treatment of the fracture (operative or nonoperative). Agreement among observers was assessed with use of the multirater kappa (κ) measure. Interobserver reliability of the AO classification, fracture characteristics, and preferred treatment generally ranged from "slight" to "fair." A few small but statistically significant differences were found. Observers randomized to the 2-D CT group had slightly but significantly better agreement on displacement of the greater tuberosity (κ = 0.35 compared with 0.30, p < 0.001) and on the AO classification (κ = 0.18 compared with 0.17, p = 0.018). A subgroup analysis of the AO classification results revealed that shoulder and elbow surgeons, orthopaedic trauma surgeons, and surgeons in the United States had slightly greater reliability on 2-D CT, whereas surgeons in practice for ten years or less and surgeons from other subspecialties had slightly greater reliability on 3-D CT. Proximal humeral fracture classifications may be helpful conceptually, but they have poor interobserver reliability even when 3-D rather than 2-D CT is utilized. This may contribute to the similarly poor interobserver reliability that was observed for selection of the treatment for proximal humeral fractures. The lack of a reliable classification confounds efforts to compare the outcomes of treatment methods among different clinical trials and reports.

Characterization of microstructures and tensile properties of TRIP-aided steels with different matrix microstructure

Three different heat treatment processes have been proposed as a fundamental method to produce three kinds of TRIP-aided steels with polygonal ferritic matrix (F-TRIP), bainitic matrix (B-TRIP) and martensitic matrix (M-TRIP) in a newly designed low alloy carbon steel. By means of dilatometry study and detailed characterization, the relationships among transformation, microstructure and the resulting mechanical behavior were compared and analyzed for the three cases. The work hardening of the samples was evaluated by calculating the instantaneous n value as a function of strain. The M-TRIP sample exhibits the highest strength with the highest work hardening rate at low strains and subsequent rapid descending at high strains. In contrast, the B-TRIP sample has relatively high continuously constant work hardening behavior over strain levels greater than 0.067. The difference in work hardening behavior corresponds directly to the rate of the retained austenite-martensitic transformation during straining, which can be attributed to the carbon content, the morphology of the retained austenite and the matrix microstructure in the respective TRIP-aided samples. © 2014 Elsevier B.V.