Optimal Recycling Combination of Ash in South-East Finland

The present world energy production is heavily relying on the combustion of solid fuels like coals, peat, biomass, municipal solid waste, whereas the share of renewable fuels is anticipated to increase in the future to mitigate climate change. In Finland, peat and wood are widely used for energy production. In any case, the combustion of solid fuels results in generation of several types of thermal conversion residues, such as bottom ash, fly ash, and boiler slag. The predominant residue type is determined by the incineration technology applied, while its composition is primarily relevant to the composition of fuels combusted. An extensive research has been conducted on technical suitability of ash for multiple recycling methods. Most of attention was drawn to the recycling of the coal combustion residues, as coal is the primary solid fuel consumed globally. The recycling methods of coal residues include utilization in a cement industry, in concrete manufacturing, and mine backfilling, to name few. Biomass combustion residues were also studied to some extent with forest fertilization, road construction, and road stabilization being the predominant utilization options. Lastly, residues form municipal solid waste incineration attracted more attention recently following the growing number of waste incineration plants globally. The recycling methods of waste incineration residues are the most limited due to its hazardous nature and varying composition, and include, among others, landfill construction, road construction, mine backfilling. In the study, environmental and economic aspects of multiple recycling options of thermal conversion residues generated within a case-study area were studied. The case-study area was South-East Finland. The environmental analysis was performed using an internationally recognized methodology — life cycle assessment. Economic assessment was conducted applying a widely used methodology — cost-benefit analysis. Finally, the results of the analyses were combined to enable easier comparison of the recycling methods. The recycling methods included the use of ash in forest fertilization, road construction, road stabilization, and landfill construction. Ash landfilling was set as a baseline scenario. Quantitative data about the amounts of ash generated and its composition was obtained from companies, their environmental reports, technical reports and other previously published literature. Overall, the amount of ash in the case-study area was 101 700 t. However, the data about 58 400 t of fly ash and 35 100 t of bottom ash and boiler slag were included in the study due to lack of data about leaching of heavy metals in some cases. The recycling methods were modelled according to the scientific studies published previously. Overall, the results of the study indicated that ash utilization for fertilization and neutralization of 17 600 ha of forest was the most economically beneficial method, which resulted in the net present value increase by 58% compared to ash landfilling. Regarding the environmental impact, the use of ash in the construction of 11 km of roads was the most attractive method with decreased environmental impact of 13% compared to ash landfilling. The least preferred method was the use of ash for landfill construction since it only enabled 11% increase of net present value, while inducing additional 1% of negative impact on the environment. Therefore, a following recycling route was proposed in the study. Where possible and legally acceptable, recycle fly and bottom ash for forest fertilization, which has strictest requirements out of all studied methods. If the quality of fly ash is not suitable for forest fertilization, then it should be utilized, first, in paved road construction, second, in road stabilization. Bottom ash not suitable for forest fertilization, as well as boiler slag, should be used in landfill construction. Landfilling should only be practiced when recycling by either of the methods is not possible due to legal requirements or there is not enough demand on the market. Current demand on ash and possible changes in the future were assessed in the study. Currently, the area of forest fertilized in the case-study are is only 451 ha, whereas about 17 600 ha of forest could be fertilized with ash generated in the region. Provided that the average forest fertilizing values in Finland are higher and the area treated with fellings is about 40 000 ha, the amount of ash utilized in forest fertilization could be increased. Regarding road construction, no new projects launched by the Center of Economic Development, Transport and the Environment in the case-study area were identified. A potential application can be found in the construction of private roads. However, no centralized data about such projects is available. The use of ash in stabilization of forest roads is not expected to increased in the future with a current downwards trend in the length of forest roads built. Finally, the use of ash in landfill construction is not a promising option due to the reducing number of landfills in operation in Finland.

La1-xSrxMnO3 as a candidate for a room temperature pressure sensor /

Perovskite manganite compounds, Lai-xDxMnOs (D-divalent alkaline earth Ca, Sr or Ba), whose electrical and magnetic properties were first investigated nearly a half century ago, have attracted a great deal of attention due to their rich phase diagram. From the point of view of designing a future application, the strong pressure dependence of the resistivity and the accompanying effects in thin films have potential for application in pressure sensing and electronic devices. In this study we report our experimental investigations of pressure dependence of the resistivity of Lao.siSvo^iQMnOs and Lai-xSvxMnOs (LSMO) epitaxial films with x= 0.15, 0.20, 0.25, 0.30, 0.35, on SrTiOs substrates.

Regional variations of deformation mechanisms in the Lorrain Quartzite near Whitefish Falls, Ontario, Canada /

The quartzite microfabric found in the Lorrain Formation was studied across the La Cloche syncline, along a regional north-south transect along highway 6, near Whitefish Falls, Ontario. The complete stratigraphic sequence across the syncline is preserved, and is present on each fold limb. The lithostratigraphic units with the smallest grains size and lowest mica content are located close to the core of the fold, while coarser grained mica and feldspar rich units are situated at the northern and southern most extent of the transect. Deformation mechanisms vary with lithology and with position across the fold. Pressure solution appears to be the dominant deformation mechanism in the feldspathic, micaceous and ferruginous units. In the finer grained, mica poor white medium grained and cherty sandstone units, grain boundary migration (GBM) characteristics show dominance over those of pressure solution and show high amounts of fracturing which cut migrated boundaries and therefore post date GBM. All samples across the fold display a preferred orientation of quartz c-axes. The senses of asymmetry of fabrics are found to be similar across the syncline, with the exception of the ferruginous sandstone unit. Formation of these similar fabrics synmietries can not be the result of strain related to first order folding. The mica content appears to be related to the percentage of quartz lost due to pressure solution as a result of strain; the more mica present, the less quartz was lost. Calculations based on the shape of initial grains suggest that conservatively 30% of the quartz volume has been dissolved out of the Lorrain quartzite, and potentially migrated hundreds of meters to other members of the Huronian Supergroup as there was no meso or macroscopic evidence observed in outcrop.

A dimensional analysis of the benzylic hydroxylase active site in mortierella isabellina

The spatial limits of the active site in the benzylic hydroxylase enzyme of the fungus Mortierella isabellina were investigated. Several molecular probes were used in incubation experiments to determine the acceptability of each compound by this enzyme. The yields of benzylic alcohols provided information on the acceptability of the particular compound into the active site, and the enantiomeric excess values provided information on the "fit" of acceptable substrates. Measurements of the molecular models were made using Cambridge Scientific Computing Inc. CSC Chem 3D Plus modeling program. i The dimensional limits of the aromatic binding pocket of the benzylic hydroxylase were tested using suitably substituted ethyl benzenes. Both the depth (para substituted substrates) and width (ortho and meta substituted substrates) of this region were investigated, with results demonstrating absolute spatial limits in both directions in the plane of the aromatic ring of 7.3 Angstroms for the depth and 7.1 Angstroms for the width. A minimum requirement for the height of this region has also been established at 6.2 Angstroms. The region containing the active oxygen species was also investigated, using a series of alkylphenylmethanes and fused ring systems in indan, 1,2,3,4-tetrahydronaphthalene and benzocycloheptene substrates. A maximum distance of 6.9 Angstroms (including the 1.5 Angstroms from the phenyl substituent to the active center of the heme prosthetic group of the enzyme) has been established extending directly in ii front of the aromatic binding pocket. The other dimensions in this region of the benzylic hydroxylase active site will require further investigation to establish maximum allowable values. An explanation of the stereochemical distributions in the obtained products has also been put forth that correlates well with the experimental observations.

Sedimentology and micromorphology of drumlin sediments at Chimney Bluffs State Park, New York, United States of America

The drumlin sediments at Chimney Bluffs, New York appear to represent a block-inmatrix style glacial melange. This melange comprises sand stringers, lenses and intraclasts juxtaposed in an apparently massive diamicton. Thin section examination of these glacigenic deposits has revealed microstructures indicative of autokinetic subglacial defonnation which are consistent with a deformable bed origin for the diamicton. These features include banding and. necking of matrix grains, oriented plasma fabrics and the formation of pressure shadows at the long axis ends of elongate clasts. Preservation of primary stratification within the sand intraclasts appears to suggest that these features were pre-existing up-ice deposits that were frozen, entrained, then deposited as part of a defonning till layer beneath an advancing ice sheet. Multi-directional micro-shearing within the sand blocks is thought to reflect the frozen nature of the sand units in such a high strain environment. It is also contended that dewatering of the sediment pile leading to the eventual immobilisation of the defonning till layer was responsible for opening sub-horizontal fissures within the diamicton. These features were subsequently infilled with mass flow poorly sorted sands and silts which were subjected to ductile defonnation during the waning stages of an actively deforming till layer. Microstructures indicative of the dewatering processes in the sand units include patches of fine-grained particles within a coarser-grained matrix and the presence of concentrated zones of translocated clays. However, these units were probably confined within an impermeable diamicton casing that prevented massive pore water influxes from the deforming till layer~ Hence, these microstructures probably reflect localised dewatering of the sand intraclasts. A layered subglacial shear zone model is proposed for the various features exhibited by the drumlin sediments. The complexity of these structures is explained in terms of ii superposing deformation styles in response to changing pore water pressures. Constructional glaciotectonics, as implied by the occurrence of sub-horizontal fissuring, is suggested as the mechanism for the stacking of the sand intraclast units within the diamicton. The usefulness of micromorphology in complimenting the traditional sedimentology of glacigenic deposits is emphasised by the current study. An otherwise massive diamicton was shown to contain microstructures indicative of the very high strain rates expected in a complexly deforming till layer. . It is quite obvious from this investigation that the classification of diamictons needs to be re-examined for evidence of microstructures that could lead to the re-interpretation of diamicton forming processes. RESUME Le pacquet de sediments drumlinaire de Chimney Bluffs, New York, represent un "bloc-en-matrice" genre de melange glaciale. Des structures microscopique comprennent l'evidence pour la defonnation intrinseque attribuee a l'origine lit non resistant du drumlin. PreselVation des structures primaires au coeur des blocs arenaces suggere que ceux sont des depots preexistant qui furent geles, entraines et par la suite sedimentes au milieu d'une couche de debris sous-glaciaires en voie de deformation. Des failles microscopiques a l'interieur des blocs arenaces appuient aussi l'idee d'un bloc cohesif (c'est-a-dire gele) au centre d'un till non resistant. Des implications significatives s'emergent de cette etude pour les conditions sous-glaciaire et les processus de la formation des drumlin.

From absolutes to aesthetics : John Dewey and the art of experience /

In this thesis I sought to capture something of the integrity of John Dewey's larger vision. While recognizing this to be a difficult challenge, I needed to clear some of the debris of an overly narrow reading of Dewey's works by students of education. The tendency of reducing Dewey's larger philosophical vision down to neat theoretical snap shots in order to prop up their particular social scientific research, was in my estimation slowly damaging the larger integrity of Dewey's vast body of work. It was, in short, killing off the desire to read big works, because doing so was not necessary to satisfying the specialized interests of social scientific research. In this thesis then I made a plea for returning the Humanities to the center of higher education. It is there that students learn how to read and to think—skills required to take on someone of Dewey's stature. I set out in this thesis to do just that. I took Dewey's notion of experience as the main thread connecting all of his philosophy, and focused on two large areas of inquiry, science and its relation to philosophy, and aesthetic experience. By exploring in depth Dewey's understanding of human experience as it pertains to day-to-day living, my call was for a heightened mode of artful conduct within our living contexts. By calling on the necessity of appreciating the more qualitative dimensions of lived experience, I was hoping that students engaged in the Social Sciences might begin to bolster their research interests with more breadth and depth of reading and critical insight. I expressed this as being important to the survival and intelligent flourishing of democratic conduct.

A study of selected factors influencing the reproductive performance of the common tern (Sterna hirundo) at Port Colborne, Ontario in 1973 and 1974

Several study areas were investigated at two Port Colborne terneries during the summers of 1973 and 1974 in an attempt to determine the influence of clutch size, time of clutch initiation, position in the colony, proximity to Ring-billed Gulls, vegetation and nesting substrate on the reproductive performance of the Common Tern. Hatching success and reproductive success (the number of chicks fledged per egg laid) were generally higher for 3-egg than 2-egg clutches but fledging (the number of chicks fledged per egg hatched) success was usually independant of clutch size. Hatching, fledging and reproductive success declined as a function of time of clutch initiation. Mean clutch sizes also generally declined as a function of time. Nests located in the center of the colony exhibited higher fledging success than those on the periphery. Rock-based clutches had a lower hatching success than clutches initiated on sand or dried vegetation. Reproductive performance did not appear to be related to proximity to Ring-billed Gulls or vegetation within the study area.

Office of the University President Sous fonds: Dr. James A. Gibson

Dr. James A. Gibson was born in Ottawa on January 29, 1912 to John W. and Belle Gibson. At an early age the family moved to Victoria, B.C. where John W. Gibson was a director of the Elementary Agricultural Education Branch, Department of Education. Gibson received his early education in Victoria, receiving a B.A. (honours) at UBC in 1931. In 1931 he was awarded the Rhodes scholarship and received his B.A., M.A., B.Litt and D. Phil at New College, Oxford. This was to be the beginning of a long and dedicated relationship with the Rhodes Scholar Association. Upon his return to Canada, Dr. Gibson lectured in Economics and Government at the University of British Columbia. In 1938 he was married to Caroline Stein in Philadelphia, and the same year joined the staff of the Department of External Affairs as a Foreign Service officer. Within twenty minutes of his arrival he was seconded to the Office of the Prime Minister and Secretary of State for External Affairs, W. L. Mackenzie King in charge of War Records and Liaison Officer. This was a critical time in the history of Canada, and Dr. Gibson experienced firsthand several milestones, including the Royal Visit of King George VI and Queen Elizabeth in 1939. Dr. Gibson was present at the formation of the United Nations in San Francisco in 1945, being part of the Prime Minister’s professional staff as well as attending conferences in Washington, Quebec and London as an advisor to the Canadian delegation. Gibson contributed many articles to the publication bout de papier about his experiences during these years. After his resignation in 1947, Gibson joined the staff of the fledgling Carleton College, as a lecturer. In 1949 he was appointed a professor and in 1951 became Dean of Arts and Sciences. Dr. Gibson acted as President from 1955 to 1956 upon the sudden death of Dr. MacOdrum. In 1963 Dr. Gibson accepted the invitation of the Brock University Founders’ Committee, chaired by Arthur Schmon, to become the founding president. Dr. Gibson guided the new University from a converted refrigeration plant, to an ever expanding University campus on the brow of the Niagara Escarpment. Dr. Gibson remained firmly “attached” to Brock University. Even after official retirement, in 1974, he retained the title President Emeritus. Gibson’s final official contribution was an unpublished ten year history of the University. In retirement Gibson remained active in scholarly pursuits. He was a visiting scholar at the Center of Canadian Studies, University of Edinburgh; continued his ongoing research activities focusing on W. L. Mackenzie King, the Office of the Governor General of Canada, and political prisoners transported to Van Dieman’s Land. He remained active in the Canadian Association of Rhodes Scholars, becoming editor from 1975 to 1994 and was appointed Editor Emeritus and Director for Life in 1995 in honour of his dedicated and outstanding service. In 1993 he was awarded one of Canada’s highest achievements, the Order of Canada. Gibson retained close ties with Brock University and many of its faculty. He maintained an office in the Politics Department where he became a vital part of the department. In 1996 Brock University honoured Gibson by naming the University Library in his honour. James A. Gibson Library staff was instrumental in celebrating the 90th birthday of Gibson in 2002, with a widely attended party in the Pond Inlet where many former students, including Silver Badgers. The attendees also included former and current colleagues from Brock University, Canadian Rhodes Scholars Association, family and friends. Gibson was later to remark that the highlight of this event was the gift of his original academic robe which he had personally designed in 1964. In 2003 Dr. Gibson moved to Ottawa to be near some of his children and the city of his birth and early career. In that year “two visits to Brock ensued: the first, to attend a special celebration of the James A. Gibson Library; his late to attend the 74th Convocation on Saturday, October 18, 2003. A week later, in Ottawa, he went for a long walk, returned to his residence, Rideau Gardens, went into the lounge area, took off his coat and folded it up, put it on the back of his chair, sat down, folded his hands in his lap, closed his eyes, and died”. With sources from: Carleton University The Charlatan, Gibson CV, and Memorial Service Programme

The Effect of Functional Electrically Stimulated Ambulation Training on Locomotor Function and Quality of Life in Individuals With Incomplete Spinal Cord Injury

The purpose of this study was to investigate the effects of a 12-week FES-ambulation program on locomotor function and quality of life after incomplete spinal cord injury. Six individuals with incomplete SCI participated in the study. Over-ground walking endurance (6MWT), speed (10MWT), independence (WISCI II) and body-weight support were assessed. Quality of life was assessed via the SF-36, WHOQOL-BREF, Perceived Stress Scale, Center of Epidemiological Studies for Depression scale, and task self-efficacy. Participants experienced significant improvements in walking endurance (223.6±141.5m to 297.3±164.5m; p=0.03), body-weight support (55.3±12.6% to 14.7±23.2%; p= 0.005) and four of the six participants showed improvements on the WISCI II scale (1-4 points). In addition, there was a significant reduction in reported bodily pain (6.5±1.2 to 5.0±1.7; p=0.04). Therefore, FES-ambulation is an effective means for enhancing over-ground locomotor function in individuals with incomplete SCI. It may also be an effective method for reducing pain in individuals with SCI.

Optimizing Computational Frameworks to Study the Influence of the Protein Environment on the Individual Site Energies of Chromophores in Photosystem II of Photosynthesis

Photosynthesis is a process in which electromagnetic radiation is converted into chemical energy. Photosystems capture photons with chromophores and transfer their energy to reaction centers using chromophores as a medium. In the reaction center, the excitation energy is used to perform chemical reactions. Knowledge of chromophore site energies is crucial to the understanding of excitation energy transfer pathways in photosystems and the ability to compute the site energies in a fast and accurate manner is mandatory for investigating how protein dynamics ef-fect the site energies and ultimately energy pathways with time. In this work we developed two software frameworks designed to optimize the calculations of chro-mophore site energies within a protein environment. The first is for performing quantum mechanical energy optimizations on molecules and the second is for com-puting site energies of chromophores in a fast and accurate manner using the polar-izability embedding method. The two frameworks allow for the fast and accurate calculation of chromophore site energies within proteins, ultimately allowing for the effect of protein dynamics on energy pathways to be studied. We use these frame-works to compute the site energies of the eight chromophores in the reaction center of photosystem II (PSII) using a 1.9 Å resolution x-ray structure of photosystem II. We compare our results to conflicting experimental data obtained from both isolat-ed intact PSII core preparations and the minimal reaction center preparation of PSII, and find our work more supportive of the former.

Who is to protect whom from what? The human security dilemmas of Iraq, North Korea and Darfur

Brian Job, Professor, Department of Political Science, University of British Columbia, Director, Center of International Relations. Présentation dans le cadre du cycle de conférences organisé par le CRDP intitulé « Le droit à la sécurité ... la sécurité par le droit ».

The Credibility and Authoritativeness of Documentary Information in Determining Refugee Status: The Canadian Experience

This article reviews the origins of the Documentation, Information and Research Branch (the 'Documentation Center') of Canada's Immigration and Refugee Board (IRB), established in 1988 as a part of a major revision of the procedure for determination of refugee status. The Documentation Center conducts research to produce documents describing conditions in refugee-producing countries, and also disseminates information from outside. The information is available to decision-makers, IRB staff, counsel and claimants. Given the importance of decisions on refugee status, the article looks at the credibility and the authoritativeness of the information, by analyzing the structure of information used. It recalls the different types of information 'package' produced, such as a country profiles and the Question and Answer Series, the Weekly Madia Review, the 'Perspectives' series, Responses to Information Requests and Country files, and considers the trend towards standardization across the country. The research process is reviewed, as are the hiring criteria for researchers, the composition of the 'collection', how acquisitions are made, and the development of databases, particularly on country of origin (human rights material) and legal information, which are accessible on-line. The author examines how documentary information can be used by decision-makers to draw conclusions as to whether the claim has a credible basis or the claimant has a well-founded fear of persecution. Relevant caselaw is available to assess and weigh the claim. The experience of Amnesty International in similar work is cited for comparative purposes. A number of 'safeguards' are mentioned, which contribute to the goal of impartiality in research, or which otherwise enhance the credibility of the information, and the author suggests that guidelines might be drafted to explain and assist in the realization of these aims. Greater resources might also enable the Center to undertake the task of 'certifying' the authoritativeness of sources. The author concludes that, as a new institution in Canadian administrative law, the Documentation Center opens interesting avenues for the future. Beacause it ensures an acceptable degree of impartiality of its research and the documents it produces, it may be a useful model for others tribunals adjudicating in fields where evidence is either difficult to gather, or is otherwise complex.

Purification of mitochondrial RNase P in A. nidulans

Résumé La ribonucléase P (RNase P) est une ribonucléoprotéine omniprésente dans tous les règnes du vivant, elle est responsable de la maturation en 5’ des précurseurs des ARNs de transfert (ARNts) et quelques autres petits ARNs. L’enzyme est composée d'une sous unité catalytique d'ARN (ARN-P) et d'une ou de plusieurs protéines selon les espèces. Chez les eucaryotes, l’activité de la RNase P cytoplasmique est distincte de celles des organelles (mitochondrie et chloroplaste). Chez la plupart des espèces, les ARN-P sont constituées de plusieurs éléments structuraux secondaires critiques conservés au cours de l’évolution. En revanche, au niveau de la structure, une réduction forte été observé dans la plupart des mtARN-Ps. Le nombre de protéines composant la RNase P est extrêmement variable : une chez les bactéries, environ quatre chez les archéobactéries, et dix chez la forme cytoplasmique des eucaryotes. Cet aspect est peu connu pour les formes mitochondriales. Dans la plupart des cas, l’identification de la mtRNase P est le résultat de longues procédures de purification comprenant plusieurs étapes dans le but de réduire au minimum le nombre de protéines requises pour l’activité (exemple de la levure et A. nidulans). Cela mène régulièrement à la perte de l’activité et de l’intégrité des complexes ribonucléo-protéiques natifs. Dans ce travail, par l’utilisation de la technique de BN-PAGE, nous avons développé une procédure d’enrichissement de l’activité RNase P mitochondriale native, donnant un rendement raisonnable. Les fractions enrichies capables de cette activité enzymatique ont été analysées par LC/MS/MS et les résultats montrent que l’holoenzyme de la RNase P de chacune des fractions contient un nombre de protéines beaucoup plus grand que ce qui était connue. Nous suggérons une liste de protéines (principalement hypothétiques) qui accompagnent l’activité de la RNase P. IV De plus, la question de la localisation de la mtRNase P de A. nidulans a été étudiée, selon nos résultats, la majorité de la mtRNase P est attachée á la membrane interne de la mitochondrie. Sa solubilisation se fait par l’utilisation de différents types de détergent. Ces derniers permettent l’obtention d’un spectre de complexes de la RNase P de différentes tailles.

The Place of the Gods : Biblical, Tragic, and Humanist Modes in Shakespeare’s Antony and Cleopatra

Ce mémoire se focalise sur la pièce Antony and Cleopatra de Shakespeare en relation avec la pensée biblique, l’humanisme de la Renaissance et les caractéristiques de la tragédie comme genre littéraire et philosophie grecque. La chute d’Adam et Eve dans la Bible, ainsi que le conflit entre le héros tragique et les dieux, sont deux thèmes qui sont au centre de ce mémoire. Le mythe de la chute d’Adam et Eve sert, en effet, d’un modèle de la chute—et par conséquent, de la tragédie—d’Antoine et Cléopâtre mais aussi de structure pour ce mémoire. Si le premier chapitre parle de paradis, le deuxième évoque le péché originel. Le troisième, quant à lui, aborde une contre-rédemption. Le premier chapitre réfère à l’idée du paradis, ou l’Éden dans la bible, afin d’examiner ce qui est édénique dans Antony and Cleopatra. La fertilité, l’épicuréisme, l’excès dionysien sont tous des éléments qui sont présents dans la conception d’un Éden biblique et Shakespearien. Le deuxième chapitre est une étude sur la tragédie comme genre fondamentalement lié à la pensée religieuse et philosophique des grecs, une pensée qui anime aussi Antony and Cleopatra. Ce chapitre montre, en effet, que les deux protagonistes Shakespeariens, comme les héros tragiques grecs, défient les dieux et le destin, engendrant ainsi leur tragédie (ou ‘chute’, pour continuer avec le mythe d’Adam et Eve). Si le deuxième chapitre cherche à créer des ponts entre la tragédie grecque et la tragédie Shakespearienne, le troisième chapitre montre que le dénouement dans Antony and Cleopatra est bien différent des dénouements dans les tragédies de Sophocle, Euripide, et Eschyle. Examinant la pensée de la Renaissance, surtout la notion d’humanisme, la partie finale du mémoire présente les protagonistes de Shakespeare comme des éternels rebelles, des humanistes déterminés à défier les forces du destin.

Characterization of glutaraldehyde-immobilized chymotrypsin and an in-situ immobilized enzyme reactor using capillary electrophoresis-based peptide mapping

La digestion enzymatique des protéines est une méthode de base pour les études protéomiques ainsi que pour le séquençage en mode « bottom-up ». Les enzymes sont ajoutées soit en solution (phase homogène), soit directement sur le gel polyacrylamide selon la méthode déjà utilisée pour l’isolation de la protéine. Les enzymes protéolytiques immobilisées, c’est-à-dire insolubles, offrent plusieurs avantages tels que la réutilisation de l’enzyme, un rapport élevé d’enzyme-sur-substrat, et une intégration facile avec les systèmes fluidiques. Dans cette étude, la chymotrypsine (CT) a été immobilisée par réticulation avec le glutaraldehyde (GA), ce qui crée des particules insolubles. L’efficacité d’immobilisation, déterminée par spectrophotométrie d’absorbance, était de 96% de la masse totale de la CT ajouté. Plusieurs différentes conditions d’immobilisation (i.e., réticulation) tels que la composition/pH du tampon et la masse de CT durant la réticulation ainsi que les différentes conditions d’entreposage tels que la température, durée et humidité pour les particules GA-CT ont été évaluées par comparaison des cartes peptidiques en électrophorèse capillaire (CE) des protéines standards digérées par les particules. Les particules de GA-CT ont été utilisés pour digérer la BSA comme exemple d’une protéine repliée large qui requit une dénaturation préalable à la digestion, et pour digérer la caséine marquée avec de l’isothiocyanate de fluorescéine (FITC) comme exemple d’un substrat dérivé afin de vérifier l’activité enzymatique du GA-CT dans la présence des groupements fluorescents liés au substrat. La cartographie peptidique des digestions par les particules GA-CT a été réalisée par CE avec la détection par absorbance ultraviolet (UV) ou fluorescence induite par laser. La caséine-FITC a été, en effet, digérée par GA-CT au même degré que par la CT libre (i.e., soluble). Un microréacteur enzymatique (IMER) a été fabriqué par immobilisation de la CT dans un capillaire de silice fondu du diamètre interne de 250 µm prétraité avec du 3-aminopropyltriéthoxysilane afin de fonctionnaliser la paroi interne avec les groupements amines. Le GA a été réagit avec les groupements amine puis la CT a été immobilisée par réticulation avec le GA. Les IMERs à base de GA-CT étaient préparé à l’aide d’un système CE automatisé puis utilisé pour digérer la BSA, la myoglobine, un peptide ayant 9 résidus et un dipeptide comme exemples des substrats ayant taille large, moyenne et petite, respectivement. La comparaison des cartes peptidiques des digestats obtenues par CE-UV ou CE-spectrométrie de masse nous permettent d’étudier les conditions d’immobilisation en fonction de la composition et le pH du tampon et le temps de réaction de la réticulation. Une étude par microscopie de fluorescence, un outil utilisé pour examiner l’étendue et les endroits d’immobilisation GA-CT dans l’IMER, ont montré que l’immobilisation a eu lieu majoritairement sur la paroi et que la réticulation ne s’est étendue pas si loin au centre du capillaire qu’anticipée.