Novel Sealing Technique for Practical Liquid-Core Photonic Crystal Fibers

In this letter, we describe a simple and effective technique to prevent evaporation in liquid-core photonic crystal fibers (PCFs). The technique consists of using a micropipette to deploy a micro-droplet of an ultraviolet curable polymer adhesive in both core inputs. After it is cured, the adhesive creates sealing polymer plugs with quite satisfactory insertion loss (overall optical transmission of about 15%). Processed fibers remained liquid-filled for at least six weeks. From a practical point of view, we conducted a supercontinuum generation experiment in a water-core PCF to demonstrate a 120-minute spectral width stability and the ability to withstand at least 3-mW average power at the sealed fiber input. Similar experiments carried out with nonsealed fibers produced supercontinuum spectra lasting no longer than 10 minutes, with average powers kept below 0.5 mW to avoid thermally induced evaporation.

Thermo and mechanical cycling and veneering method do not influence Y-TZP core/veneer interface bond strength

Objectives: The purpose of this study was to evaluate the influence of thermal and mechanical cycling and veneering technique on the shear bond strength of Y-TZP (yttrium oxide partially stabilized tetragonal zirconia polycrystal) core–veneer interfaces. Materials and methods: Cylindrical Y-TZP specimens were veneered either by layering (n = 20) or by pressing technique (n = 20). A metal ceramic group (CoCr) was used as control (n = 20). Ten specimens for each group were thermal and mechanical cycled and then all samples were subjected to shear bond strength in a universal testing machine with a 0.5 mm/min crosshead speed. Mean shear bond strength (MPa) was analysed with a 2-way analysis of variance and Tukey’s test ( p < 0.05). Failure mode was determined using stereomicroscopy and scanning electron microscopy (SEM). Results: Thermal and mechanical cycling had no influence on the shear bond strength for all groups. The CoCr group presented the highest bond strength value ( p < 0.05) (34.72 7.05 MPa). There was no significant difference between Y-TZP veneered by layering (22.46 2.08 MPa) or pressing (23.58 2.1 MPa) technique. Failure modes were predominantly adhesive for CoCr group, and cohesive within veneer for Y-TZP groups. Conclusions: Thermal and mechanical cycling, as well as the veneering technique does not affect Y-TZP core–veneer bond strength. Clinical significance: Different methods of veneering Y-TZP restorations would not influence the clinical performance of the core/veneer interfaces.

USO DO DUBLIN CORE NA DESCRIÇÃO DE OBRAS RARAS NA WEB: A COLEÇÃO DA BIBLIOTECA BRASILIANA DIGITAL

Acessível ao público desde junho de 2009, a Biblioteca Brasiliana Digital, da Universidade de São Paulo tem por objetivo facultar para a pesquisa, a maior Brasiliana custodiada por uma universidade. Sua intenção é disponibilizar virtualmente parte do acervo da Universidade oferecendo-se como um instrumento útil e funcional para a pesquisa e o estudo dos temas e cultura brasileiros, além de oferecer um modelo tecnológico de gestão que possa ser difundido a outras coleções, acervos e instituições. Este trabalho apresenta os resultado da implantação de um esquema de metadados baseado no formato Dublin Core, para a descrição de obras raras e especiais na web. Especificamente, apresenta os procedimentos e processos de descrição de conteúdos das diversas tipologias documentais (livros, periódicos, gravuras etc.) e formatos digitais (pdf, jpeg entre outros). Palavras-Chave: Bibliotecas digitais; Metadados; Dublin Core.

Photoluminescence of core-shell nanoparticles made from yttrium stabilized zirconia powder grain coated with alumina

A YSZ@Al2O3 nanocomposite was obtained by Al2O3 coating on the surface of yttrium stabilized zirconia via a polymeric precursor method. The resulting core–shell structures were characterized by X-ray diffraction, scanning electron microscopy, transmission electronic microscopy and PL spectra. The TEM micrographs clearly show a homogeneous Al2O3 shell around the ZrO2 core. The observed PL is related to surface–interface defects. Such novel technologies can, in principle, explore materials which are not available in the bulk single crystal form but their figure-of-merit is dramatically dependent on the surface–interface defect states.

A core calculus for the analysis and implementation of biologically inspired languages

The application of Concurrency Theory to Systems Biology is in its earliest stage of progress. The metaphor of cells as computing systems by Regev and Shapiro opened the employment of concurrent languages for the modelling of biological systems. Their peculiar characteristics led to the design of many bio-inspired formalisms which achieve higher faithfulness and specificity. In this thesis we present pi@, an extremely simple and conservative extension of the pi-calculus representing a keystone in this respect, thanks to its expressiveness capabilities. The pi@ calculus is obtained by the addition of polyadic synchronisation and priority to the pi-calculus, in order to achieve compartment semantics and atomicity of complex operations respectively. In its direct application to biological modelling, the stochastic variant of the calculus, Spi@, is shown able to model consistently several phenomena such as formation of molecular complexes, hierarchical subdivision of the system into compartments, inter-compartment reactions, dynamic reorganisation of compartment structure consistent with volume variation. The pivotal role of pi@ is evidenced by its capability of encoding in a compositional way several bio-inspired formalisms, so that it represents the optimal core of a framework for the analysis and implementation of bio-inspired languages. In this respect, the encodings of BioAmbients, Brane Calculi and a variant of P Systems in pi@ are formalised. The conciseness of their translation in pi@ allows their indirect comparison by means of their encodings. Furthermore it provides a ready-to-run implementation of minimal effort whose correctness is granted by the correctness of the respective encoding functions. Further important results of general validity are stated on the expressive power of priority. Several impossibility results are described, which clearly state the superior expressiveness of prioritised languages and the problems arising in the attempt of providing their parallel implementation. To this aim, a new setting in distributed computing (the last man standing problem) is singled out and exploited to prove the impossibility of providing a purely parallel implementation of priority by means of point-to-point or broadcast communication.

Ingegnerizzazione e design di nanoparticelle core-shell di magnetite/silice

In the past decade the study of superparamagnetic nanoparticles has been intensively developed for many biomedical applications such as magnetically assisted drug delivery, MRI contrast agents, cells separation and hyperthermia therapy. All of these applications require nanoparticles with high magnetization, equipped also with a suitable surface coating which has to be non-toxic and biocompatible. In this master thesis, the silica coating of commercially available magnetic nanoparticles was investigated. Silica is a versatile material with many intrinsic features, such as hydrophilicity, low toxicity, proper design and derivatization yields particularly stable colloids even in physiological conditions. The coating process was applied to commercial magnetite particles dispersed in an aqueous solution. The formation of silica coated magnetite nanoparticles was performed following two main strategies: the Stöber process, in which the silica coating of the nanoparticle was directly formed by hydrolysis and condensation of suitable precursor in water-alcoholic mixtures; and the reverse microemulsions method in which inverse micelles were used to confine the hydrolysis and condensation reactions that bring to the nanoparticles formation. Between these two methods, the reverse microemulsions one resulted the most versatile and reliable because of the high control level upon monodispersity, silica shell thickness and overall particle size. Moving from low to high concentration, within the microemulsion region a gradual shift from larger particles to smaller one was detected. By increasing the amount of silica precursor the silica shell can also be tuned. Fluorescent dyes have also been incorporated within the silica shell by linking with the silica matrix. The structure of studied nanoparticles was investigated by using transmission electron microscope (TEM) and dynamic light scattering (DLS). These techniques have been used to monitor the syntetic procedures and for the final characterization of silica coated and silica dye doped nanoparticles. Finally, field dependent magnetization measurements showed the magnetic properties of core-shell nanoparticles were preserved. Due to a very well defined structure that combines magnetic and luminescent properties together with the possibility of further functionalization, these multifunctional nanoparticles are potentially useful platforms in biomedical fields such as labeling and imaging.

Analisi chinesiologica della risposta muscolare indotta in una varietà di esercizi di core training

Il concetto di "core training" è ampiamente diffuso nelle moderne metodologie di allenamento, nonostante sia spesso collegato a pratiche da campo non pienamente supportate dalla ricerca scientifica. Il termine "core" identifica il "centro funzionale del corpo" in grado di garantire una "adeguata stabilità prossimale al fine di ottimizzare la mobilità distale", sostenendo il complesso lombo-pelvico e permettendo la connessione funzionale tra arti e tronco. La muscolatura del core, cositutita principalmente dalla regione addominale e paraspinale, è ben condizionabile dall'utilizzo di superfici instabili quali Bosu e Fitball, strumenti comuni nel settore sportivo e rieducativo ma sui quali esistono teorie e conoscenze altamente eterogenee. Obiettivo della presente tesi è, dunque, da un lato quello di confrontare una varietà di esercizi eseguibili su entrambe le superfici instabili precedentemente citate al fine di determinare le attivazioni muscolari a livello del "core", dall'altro quello di valutare gli effetti indotti da un "core training" di 8 settimane su parametri performance-specifici. Lo studio, effettuato su atleti aventi una elevata esperienza in tale settore, evidenzia valori elettromiografici superiori nella Fitball e Bosu rispetto al tappeto, seppure in maniera non significativa; circa il legame con aspetti prestativi, emerge invece come un allenamento specifico ad alto impatto nervoso, modulato secondo un target razionale, consenta di incrementare l'endurance della muscolatura addominale, l'equilibrio funzionale dinamico e la capacità di trasmissione di forze arti-tronco, giustificandone un utilizzo in vari settori dell'attività motoria.

Core-shell macromolecules with dendritic polyphenylene core and polymer shells

Core-shell macromolecules with dendritic polyphenylene core and polymer shell Zusammenfassung / Abstract Core-shell macromolecular structures have become of great interest in materials science because they gave an opportunity to combine a large variety of chemical and physical properties in the single molecule, by combination of different (in terms of chemistry and physics) cores and shells. The interest in such complex structures was provoked by their potential applications in the coating and painting industry (latexes), as supports for catalysts in polymer industry, or as nano-containers and transporters for genes or drug delivery. The aim of this study was the synthesis, characterization and further application of core-shell macromolecules possessing a hydrophobic stiff core (polyphenylene dendrimers) surrounded with a hydrophilic, soft, covalently bonded polymer shell (poly(ethylene oxide) and its copolymers). The requirements for such complex substances were that they should be well-defined in terms of molecular weight (narrow molecular weight distribution) and in molecular structure. The preparation of core-shell molecules containing dendrimer as a core was possible via two synthetic routs: “grafting-onto” and “grafting-from”. The resulting core-shell macromolecules possessed narrow polydispersity as guaranteed by the excellent structural and functional definition of the dendrimer and the narrow polydispersity of the PEO, PS-b-PEO and PI-b-PEO attached to the dendrimer surface. Additional investigation of the size of the particles indicated a relation between both the length and the number of the polymer chains and the hydrodynamic radius determined by Dynamic Light Scattering and Fluorescent Correlation Spectroscopy. Core-shell nano-particles were applied as metallocene supports in heterogeneous olefin polymerizations. Our results indicate that such catalyst systems, that have a size of at least one order of magnitude smaller than the used by now organic supports, could be very useful as model compounds for investigations on catalyst fragmentation and its influence on the product parameters.

Die Rolle Prolin-reicher Sequenzmotive des Core-Proteins in der Morphogenese des Hepatitis-B Virus

Diese Arbeit hatte zum Ziel, den Ausschleusungsmechanismus des Hepatitis-B Virus zu beleuchten. Es ist bisher unbekannt, wie das virale Nukleokapsid umhüllt und das reife Virion aus der Leberzelle freigesetzt wird. Bei einigen RNA-Viren, beispielsweise HIV-1, Ebola oder RSV, vermitteln so genannte Late-Domänen im viralen Kapsid- oder Matrix-Protein die Knospung der Viren an intrazellulären Membranen oder der Plasmamembran. Da das HBV-Core-Protein ähnliche Sequenzen trägt, wurde in der vorliegenden Arbeit überprüft, welche Rolle diese im viralen Replikationszyklus spielen. Meine Ergebnisse zeigen, dass die beiden Prolin-reichen Sequenzen PPAY (129-132) und PPNAP (134-138), die retroviralen Late-Domänen ähneln, für die HBV-Morphogenese essentiell sind. Mutationen einzelner Aminosäuren innerhalb dieser Motive führen zu Phänotypen mit verändertem Kapsid-, Nukleokapsid- und Virus-Bildungs-Vermögen. Insbesondere sind die Aminosäure Tyrosin 132 des Motivs PPAY und die Prolinreste 134 und 135 des Motivs PPNAP erforderlich, da diese schon für die Bildung der Kapside unentbehrlich sind. Charakteristisch für beide Motive sind auch die hier gezeigten Interaktionen mit speziellen Wirtszellfaktoren, deren physiologische Funktion es ist, zelluläre Proteine in den endosomalen Sortierungsprozess einzuschleusen. Im Vordergrund stehen hier die E3 Ub-Ligase Nedd4, welche Proteine mit Ub konjugiert und diese so signifikant für die Einschleusung in das endosomale System markiert, und Tsg101, das als zentrale Komponente des ESCRT-I-Komplexes für die Erkennung von ubiquitinierten Proteinen zuständig ist und diese dadurch in die ESCRT-Kaskade des multivesikulären Endosoms einführt. Für die genannten Interaktionen ist das Motiv PPAY und hier wieder speziell das Tyrosin 132 des HBV-Core-Proteins für die Wechselwirkung mit Nedd4 notwendig. Hingegen vermittelt die L-Domänen-ähnliche Sequenz PPNAP die Assoziation von Core mit Tsg101, wobei die beiden Prolinreste 134 und 135 und auch das Asparagin 136 für die Interaktion essentiell sind. Sowohl Nedd4 als auch Tsg101 wirken im Zusammenhang mit Ubiquitin, weshalb eine Ubiquitinierung von Core, trotz bislang negativer Nachweise, wahrscheinlich ist. Zugunsten dieser Annahme spricht auch mein Nachweis, dass der Lysinrest an Position 96 des Core-Proteins, als potentieller Ub-Akzeptor, gerade in späten Schritten eine essentielle Rolle spielt. Weiterhin klärungsbedürftig ist auch die Frage, ob Core direkt mit Tsg101 und Nedd4 interagiert, oder ob andere Faktoren dazwischen geschaltet sind. Auch könnte mit Hilfe von siRNA-vermittelten Depletionsversuchen die physiologische Relevanz der Tsg101/Core-und Nedd4/Core-Interaktion weiterführend untersucht werden. Zudem zeigen meine Arbeiten, dass Core mit intrazellulären Membranen assoziiert, weshalb es interessant wäre, zu untersuchen, ob es sich hierbei um Membranen des endosomalen Systems handelt, an denen die finalen Schritte der Virus-Morphogenese stattfinden könnten.

Funzioni della subunità θ e del dominio PHP della subunità α nel core catalitico della DNA polimerasi III di Escherichia coli

Il core catalitico della DNA polimerasi III, composto dalle tre subunità α, ε e θ, è il complesso minimo responsabile della replicazione del DNA cromosomiale in Escherichia coli. Nell'oloenzima, α ed ε possiedono rispettivamente un'attività 5'-3' polimerasica ed un'attività 3'-5' esonucleasica, mentre θ non ha funzioni enzimatiche. Il presente studio si è concentrato sulle regioni del core che interagiscono direttamente con ε, ovvero θ (interagente all'estremità N-terminale di ε) e il dominio PHP di α (interagente all'estremità C-terminale di ε), delle quali non è stato sinora identificato il ruolo. Al fine di assegnare loro una funzione sono state seguite tre linee di ricerca parallele. Innanzitutto il ruolo di θ è stato studiato utilizzando approcci ex-vivo ed in vivo. I risultati presentati in questo studio mostrano che θ incrementa significativamente la stabilità della subunità ε, intrinsecamente labile. Durante gli esperimenti condotti è stata anche identificata una nuova forma dimerica di ε. Per quanto la funzione del dimero non sia definita, si è dimostrato che esso è attivamente dissociato da θ, che potrebbe quindi fungere da suo regolatore. Inoltre, è stato ritrovato e caratterizzato il primo fenotipo di θ associato alla crescita. Per quanto concerne il dominio PHP, si è dimostrato che esso possiede un'attività pirofosfatasica utilizzando un nuovo saggio, progettato per seguire le cinetiche di reazione catalizzate da enzimi rilascianti fosfato o pirofosfato. L'idrolisi del pirofosfato catalizzata dal PHP è stata dimostrata in grado di sostenere l'attività polimerasica di α in vitro, il che suggerisce il suo possibile ruolo in vivo durante la replicazione del DNA. Infine, è stata messa a punto una nuova procedura per la coespressione e purificazione del complesso α-ε-θ