Life history of a native emydid turtle (Malaclemys terrapin centrata) on the remote oceanic islands of Bermuda

Diamondback terrapins (Malaclemys terrapin) are native to the remote oceanic islands of Bermuda and presently inhabit only four small brackish water ponds on a private golf course. The life history of this species is poorly understood on Bermuda and so the aim of this study was to fill these knowledge gaps, to compare the results with what is known from other areas in the North American range, and to inform the development of a local management plan. The results of a mark-recapture census revealed that ca. 100 individuals ≥81 mm straight carapace length live on Bermuda, of which nearly half (48.5%) were considered sexually mature. The population is dominated by females (sex ratio 2.9:1) and annual recruitment over the three year period was found to be extremely low (approximately two terrapins). Female diamondback terrapins in Bermuda nest almost exclusively within a limited number of sand bunkers on the golf course. Nesting commenced in late March or early April and ended in late August. Peak oviposition was observed in May and June. Clutch size averaged 5.1 eggs (range 0-10; SD 2.4) and the incubation period averaged 61.8 days (range 49-83; SD 10.5). Delayed emergence was documented, with 43.8% of the hatchlings remaining in their natal nests over the winter months. The mean annual hatching success rate was determined to be 19% (range 17.6-21; SD 1.9). Radio-telemetry was used to investigate the movements and survivorship of postemergent hatchling diamondback terrapins. The results indicated that mangrove swamps and grass-dominated marshes adjacent to the ponds are important developmental habitats for hatchlings. Yellow-crowned night herons (Nyctanassa violacea) were found to be significant predators of small terrapins during spring emergence. Small aquatic gastropods comprised 66.7% of the faecal samples analysed from the Bermudian population. Scavenged fish and vertebrate animal remains, terrestrial arthropods, polychaete worms and bivalves were consumed in lesser amounts. Sediment from the pond environment was found in 74% of the faecal samples analysed and is believed to have been incidentally ingested while foraging for the small benthic gastropods. Eco-toxicological analyses of the pond sediment, prey and terrapin eggs showed that the Bermudian diamondback terrapins live and feed in wetland habitats characterised by chronic, multifactorial contamination; principally total petroleum hydrocarbons, polycyclic aromatic hydrocarbons and a variety of heavy metals. This study found that some of those contaminants are accumulating in the gastropod prey as well as being transferred to terrapin eggs. This may be reducing the incidence of successful embryonic development for this species in Bermuda and may likely contribute to the observed low hatching rates. These collective findings indicate that the Bermudian population is very vulnerable to local extirpation.

Impact of biohybrid magnetite nanoparticles and moroccan propolis on adherence of methicillin resistant strains of staphylococcus aureus

Biofilm bacteria are more resistant to antibiotics than planktonic cells. Propolis possesses antimicrobial activity. Generally, nanoparticles containing heavy metals possess antimicrobial and antibiofilm properties. In this study, the ability of adherence of Methicillin Resistant Strains of Staphylococcus aureus (MRSA) to catheters treated with magnetite nanoparticles (MNPs), produced by three methods and functionalized with oleic acid and a hydro-alcoholic extract of propolis from Morocco, was evaluated. The chemical composition of propolis was established by gas chromatography mass spectrometry (GC-MS), and the fabricated nanostructures characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), Mossbauer spectroscopy and Fourrier transform infrared spectroscopy (FTIR). The capacity for impairing biofilm formation was dependent on the strain, as well as on the mode of production of MNPs. The co-precipitation method of MNPs fabrication using Fe(3+) and Na₂SO₃ solution and functionalized with oleic acid and propolis was the most effective in the impairment of adherence of all MRSA strains to catheters (p < 0.001). The adherence of the strain MRSA16 was also significantly lower (p < 0.001) when the catheters were treated with the hybrid MNPs with oleic acid produced by a hydrothermal method. The anti-MRSA observed can be attributed to the presence of benzyl caffeate, pinocembrin, galangin, and isocupressic acid in propolis extract, along with MNPs. However, for MRSA16, the impairment of its adherence on catheters may only be attributed to the hybrid MNPs with oleic acid, since very small amount, if any at all of propolis compounds were added to the MNPs.

Biological Approaches for Remediation of Metal-Contaminated Sites

Environmental pollution by several heavy metals and metalloids is a severe problem worldwide, as soils became increasingly contaminated, posing a threat to ecosystems and ultimately to human health. Contamination derives from large scale urbanization and industrialization, threatening land ecosystems, surface and groundwater, as well as food safety and human health. Remediation strategies for heavy metal-contaminated sites are necessary to protect from their toxic effects and conserve the environment for future generations. Numerous physicochemical techniques have been adopted including excavation and deposition in landfills, thermal treatment, leaching and electro-reclamation. These techniques are fast but inadequate, costly, cause adverse effects on soil physical, chemical and biological properties, and may lead to secondary pollution. In fact, many of these approaches only change the problem from one form or place to another, and do not completely destroy the pollutants. There was an urgent need to develop new technologies which are cost-effective and eco-friendly. In this context, biological remediation has tremendous potential. It uses plants and microorganisms to remove or contain toxic contaminants and is considered as the most effective method because it is a natural process, environmentally-friendly, has a low cost, and wide public acceptance. The present chapter aims to provide a comprehensive review of some of the promising processes mediated by plant and microbes to remediate metal-contaminated environments. Some biological processes used for the decontamination of organic compounds will also be included because of their relevance and potential common use for both purposes.

Fitoextracção de cádmio de solos contaminados, com plantas seleccionadas

A remediação de locais contaminados com metais pesados usando plantas hiperacumuladoras aparenta ser uma alternativa bastante viável. Neste trabalho comparou-se a acumulação e tolerância ao cádmio (Cd), ambas baseadas nas respostas ao stress oxidativo em três espécies de plantas diferentes: Brassica juncea (L.) Czem., Nicotiana tabacum L. e Solanum nigrum L., descritas na literatura como plantas bastante tolerantes ou até com características híper acumuladoras. As plantas cresceram num solo contaminado com diferentes concentrações de Cd (O- 35 mg kg-1) durante um período de 90 dias. O factor de translocação (FT), utilizado para medir a translocação efectiva do Cd da raiz para a parte aérea, variou consideravelmente entre as espécies desenvolvidas. A N. tabacum foi a planta que apresentou os maiores valores de FT. Neste trabalho foi a única planta que preencheu todas as condições para ser considerada hiperacumuladora para todos os níveis de contaminação do solo. Por outro lado, a S. nigrum apresentou os maiores valores de concentração de Cd nos tecidos, com um FT > 1, na presença de 5 mg Cd kg·1 de solo. Apesar da B. juncea ter apresentado um resultado de FT inferior às restantes, foi a única planta com valores crescentes de FT com o aumento da contaminação de Cd. O stress oxidativo nas plantas desenvolvidas foi avaliado pela peroxidação lipídica e pelas actividades da catalase (CAT), ascorbato peroxidase (APX), guaiacol peroxidase (GPX) e superóxido dismutase (SOO), quer na raiz quer na parte aérea. Foi observado um aumento significativo (versus controlo) na peroxidação lipídica e actividade enzimática da CATe APX na parte aérea da B. juncea, N. tabacum e S. nigrum para os níveis de contaminação mais elevados, 15 e/ou 35 mg Cd kg-1 A B. juncea apresentou maior sensibilidade na resposta da GPX, para todas as concentrações de Cd no solo. A peroxidação lipídica e a actividade da CAT foram superiores na parte aérea em relação à raiz para todas as plantas em todas as contaminações de Cd presentes no solo. A actividade da SOO não apresentou respostas consistentes para nenhuma das plantas. ABSTRACT: Remediation of sites contaminated with heavy metals using hyper accumulators seems a promising alternative to engineering approaches. ln this work, we compared cadmium (Cd) accumulation and tolerance (based on responses to oxidative stress) in three different species, Brassica juncea (L) Czem., Nicotiana tabacum L. and Solanum nigrum L., described in the literature as very tolerant or even as hyper accumulators. The plants were grown in soil spiked with different Cd concentrations (O- 35 mg kg- 1) over a period of 90 days. The translocation factor (TF), used to measure the effectiveness of translocating Cd from roots to shoots, depended greatly on the species. N. tabacum was the plant which exhibited the highest TF values. lt was the only plant under study that fulfilled the conditions of a hyper accumulator for all levels of soil contamination. On the other hand, S. nigrum presented the highest Cd concentration in plant tissues, with TF > 1 in the presence of 5 mg Cd kg-1 of soil. Although B. juncea had presented the lowest TF and Cd concentrations, it was the only plant with TF values increasing with the level of cadmium. Oxidative stress in plants was evaluated by lipid peroxidation and activities of catalase (CAT), ascorbate peroxidase (APX), guaiacol peroxidase (GPX) and superoxide dismutase (SOO), both in roots and shoots. A significant enhancement (versus control) on lipid peroxidation and enzymatic activity of CAT and APX in shoots of B. juncea, N. tabacum and S. nigrum was observed for the highest levels of Cd in soil, 15 and/or 35 mg Cd kg-1. B. juncea presented the most sensitive response of GPX, for all levels of Cd in soil. Lipid peroxidation and CAT activity were greater in shoots than in roots for all plants and soil Cd concentrations. SOO activity did not present consistent trends for any plant.

Growth and symbiosis of plants with arbuscular mycorrhizal fungi in soil submitted to biochar application.

Arbuscular mycorrhizal fungi (AMF), which is intrinsically present or may be introduced in soils by inoculation, is an example of natural and renewable resource to increase plant nutrient uptake. This kind of fungi produces structures (hyphae, arbuscles and sometimes vesicles) inside the plant root cortex. This mutualistic relationship promotes plant gains in terms of water and nutrient absorption (mainly phosphorus). Biochar can benefit plant interaction with AMF, however, it can contain potentially toxic compounds such as heavy metals and organic compounds (e.g. dioxins, furans and polycyclic aromatic hydrocarbons), depending on the feedstock and pyrolysis conditions, which may damage organisms. For these reasons, the present work will approach the impacts of biochar application on soil attributes, AMF-plant symbiosis and its responses in plant growth and phosphorus uptake. Eucalyptus biochar produced at high temperatures increases sorghum growth; symbiosis with AMF; and enhances spore germination. Enhanced plant growth in the presence of high temperature biochar and AMF is a response of root branching stimulated by an additive effect between biochar characteristics and root colonization. Biochar obtained at low temperature reduces AMF spore germination; however it does not affect plant growth and symbiosis in soil.

Ocratossina A, metalli, insetticidi e fitoestratti: valutazione degli effetti e degli aspetti residuali nel pollame e in alimenti destinati all'uomo.

La presente tesi di Dottorato di Ricerca descrive le attività di ricerca riguardanti diversi ambiti della sicurezza alimentare, della farmacologia e tossicologia veterinaria. Sono presentati i dati relativi alla ricerca di ocratossina A (OTA) in campioni di bile, rene e fegato di polli, salami artigianali e diversi tipi di formaggio; le concentrazioni di diversi metalli pesanti in uova di galline rurali e 5 tipologie di uova industriali; i dati preliminari ottenuti dalle analisi dei primi campioni di uova e penne provenienti da allevamenti amatoriali di pollame, analizzati per la ricerca del fipronil e metaboliti. Sempre per fipronil, e la molecola foxim, sono presentati dati inerenti a studi di potenziale farmaco-resistenza di popolazioni naturali di Dermanyssus gallinae, e dell’attività insetticida di alcuni fitocomposti a base di tannini. Riguardo all’uso di fitoestratti, sono presentati i dati preliminari ottenuti nei primi mesi di una prova sperimentale in galline di razza Livornese allevata con metodo free-range, finalizzata allo studio della attività anti-infiammatoria e immuno-stimolante, nonché alla valutazione della sicurezza della integrazione nella dieta di Boswellia serrata e Salix alba. Sono stati condotti anche studi traslazionali con altri settori scientifici, relativamente la prevalenza sierologica e microbiologica per Salmonella enterica var. enteritidis e var. thiphymurium in allevamenti ornamentali e da auto-consumo di pollame, e di prevalenza e caratterizzazione di potenziali varianti virali e batteriche (incluse zoonosiche) di alcune malattie infettive del pollame ornamentale. In specie avicole ornamentali è riportato anche uno studio di campo sul trattamento off-label con Fenbendazolo e Flubendazolo in infestazioni massive da Cyathostoma bronchialis in oche esotiche ornamentali. A seguito di una collaborazione con l’Università di Firenze, sono presentati anche i risultati ottenuti da uno studio su modelli murini, dell’azione e funzionamento dei recettori Beta3, espressi nelle neoplasie più frequenti che si verificano nelle donne in gravidanza.

Study on health status and remediation potential of Phragmites australis employed in an Emilia Romagna (IT) Constructed Wetland to assess zonal variability of the facility.

Phragmites australis (Cav.) Trin. ex Steud. is a hydrophyte particularly resistant to harsh conditions, e.g. drought, high salinity, contaminants, such as heavy metals and toxic molecules, and high nutrients concentrations. These resistances render the plant suitable for water depuration, where its particular metabolism is exploited to remove pollutants and excessive nutrients from the environment. In constructed wetlands, this principle is applied to phyto-purify wastewater with various origins, such as industrial, agricultural and household, with the aim to improve its quality to an extent which would render its reuse possible. In the framework of a pre-existing project of Department of Agricultural and Food Sciences (DiSTAl), this work integrates the knowledge and data relative to an Emilia Romagna (IT) constructed wetland plant, in order to expand the knowledge about this particular facility and of the system in general. By assaying antioxidants, both non- enzymatic and enzymatic, chlorophylls content and net photosynthetic rates, and by measuring the elemental composition of the specimens, the health status and the elemental uptake of the wetland plants sampled in different areas were investigated. The results were compared amongst the examined specimens with the aim to detect areas where there may be a higher stress due to a different wastewater composition, potentially varying along the constructed route. In addition, different parameters regarding the extraction and assay protocols were investigated, in order to optimise the procedure and to select the best conditions to perform the analyses, as well as to integrate information missing in literature or found as contradictory.

Liquid biofuels for aviation: valorisation of the by-product biochar

Biochar is a carbonaceous material produced through pyrolysis of biomass. One promising application of biochar is phosphorus recovery from wastewater. Phosphorus is a vital nutrient for plant growth, but its use in fertilizers often leads to runoff or leaching. Wastewater treatment plants discharge large amounts of phosphorus-rich wastewater, contributing to eutrophication and ecological harm. Biochar can sorb phosphorus, retaining it in solid form. In this thesis, two composites made of biomass and dolomite or shells exhibited superior phosphate sorption compared to biochar alone, reaching up to 100% sorption. Biochar also finds use in soil remediation, specifically in cleaning up contaminated soil. Polycyclic aromatic hydrocarbons (PAHs), which can be carcinogenic and toxic, can be present in soil. Biochar adsorb PAHs, preventing their leakage or bioaccumulation. Hetero-PAHs, a subclass of PAHs with nitrogen, sulfur, or oxygen atoms in their ring structures, are particularly challenging to degrade. Little is known about their behavior or sorption onto biochar. In this thesis, biochar and activated carbon were effective in immobilizing PAHs and hetero-PAHs in real soils, with rates of immobilization reaching 100%. Biochar performed equally or better than activated carbon, offering a cost-effective alternative due to its lower price. Biochar reduce of metal(loid)s mobility in soil. Metal(loid)s like lead, zinc, and arsenic can contaminate soil through industrial sources, agricultural runoff, and other pollution, and are toxic to plants and animals, rendering the soil unsuitable for agriculture. When biochar is added to contaminated soil, it binds to metal(loid)s, preventing leaching into the environment. A biomass-dolomite composite was compared to activated carbon for immobilizing metal(loid)s in contaminated soils. The composite generally outperformed activated carbon and exhibited the ability to immobilize arsenic. In summary, biochar shows promise for phosphorus recovery, soil remediation, and reducing the mobility of heavy metals, offering cost-effective and sustainable solutions to these environmental challenges.

Study of an organically modified clay: Selective adsorption of heavy metal ions and voltammetric determination of mercury(II)

In this work, a hydrophilic clay, Na-montmorillonite from Wyoming, USA, was rendered organophilic by exchanging the inorganic interlayer cations for hexaclecyltrimethylammonium ions (HDTA), with the formulae of [(CH3)(3)N(C16H33)](+) ion. Based on fact that organo-clay has high affinities for non-ionic organic molecules, 1,3,4-thiadiazole-2,5-dithiol was loaded oil the HDTA-montmorillonite surface, resulting in the 1,3,4-thiadiazole-2,5-dithiol-HDTA-montmorillonite complex (TDD-organo-clay).The following properties of TDD-organo-clay are discussed: selective adsorption of heavy metal ions measured by batch and chromatographic column techniques, and utilization as preconcentration agent in a chemically modified carbon paste electrode (CMCPE) for determination of mercury(II).The main point of this paper is the construction of a selective sensor, a carbon paste electrode modified with TDD-organo-clay, its properties and its application to the determination of mercury(II) ions, as this element belongs to the most toxic metals. The chemical selectivity of this functional group and the selectivity of voltammetry were combined for preconcentration and determination. (c) 2005 Elsevier B.V. All rights reserved.

Understanding and modulating the competitive surface-adsorption of proteins through coarse-grained molecular dynamics simulations

It is now well accepted that cellular responses to materials in a biological medium reflect greatly the adsorbed biomolecular layer, rather than the material itself. Here, we study by molecular dynamics simulations the competitive protein adsorption on a surface (Vroman effect), i.e. the non-monotonic behavior of the amount of protein adsorbed on a surface in contact with plasma as functions of contact time and plasma concentration. We find a complex behavior, with regimes during which small and large proteins are not necessarily competing between them, but are both competing with others in solution ("cooperative" adsorption). We show how the Vroman effect can be understood, controlled and inverted.

Understanding and modulating the competitive surface-adsorption of proteins through coarse-grained molecular dynamics simulations

It is now well accepted that cellular responses to materials in a biological medium reflect greatly the adsorbed biomolecular layer, rather than the material itself. Here, we study by molecular dynamics simulations the competitive protein adsorption on a surface (Vroman effect), i.e. the non-monotonic behavior of the amount of protein adsorbed on a surface in contact with plasma as functions of contact time and plasma concentration. We find a complex behavior, with regimes during which small and large proteins are not necessarily competing between them, but are both competing with others in solution ("cooperative" adsorption). We show how the Vroman effect can be understood, controlled and inverted.

Adsorption energy and spin state of first-row transition metals adsorbed on MgO(100)

Slab and cluster model spin-polarized calculations have been carried out to study various properties of isolated first-row transition metal atoms adsorbed on the anionic sites of the regular MgO(100) surface. The calculated adsorption energies follow the trend of the metal cohesive energies, indicating that the changes in the metal-support and metal-metal interactions along the series are dominated by atomic properties. In all cases, except for Ni at the generalized gradient approximation level, the number of unpaired electron is maintained as in the isolated metal atom. The energy required to change the atomic state from high to low spin has been computed using the PW91 and B3LYP density-functional-theory-based methods. PW91 fails to predict the proper ground state of V and Ni, but the results for the isolated and adsorbed atom are consistent within the method. B3LYP properly predicts the ground state of all first-row transition atom the high- to low-spin transition considered is comparable to experiment. In all cases, the interaction with the surface results in a reduced high- to low-spin transition energy.

Adsorption energy and spin state of first-row transition metals adsorbed on MgO(100)

Slab and cluster model spin-polarized calculations have been carried out to study various properties of isolated first-row transition metal atoms adsorbed on the anionic sites of the regular MgO(100) surface. The calculated adsorption energies follow the trend of the metal cohesive energies, indicating that the changes in the metal-support and metal-metal interactions along the series are dominated by atomic properties. In all cases, except for Ni at the generalized gradient approximation level, the number of unpaired electron is maintained as in the isolated metal atom. The energy required to change the atomic state from high to low spin has been computed using the PW91 and B3LYP density-functional-theory-based methods. PW91 fails to predict the proper ground state of V and Ni, but the results for the isolated and adsorbed atom are consistent within the method. B3LYP properly predicts the ground state of all first-row transition atom the high- to low-spin transition considered is comparable to experiment. In all cases, the interaction with the surface results in a reduced high- to low-spin transition energy.

Study of biosorption of rare earth metals (La, Nd, Eu, Gd) by Sargassum sp. biomass in batch systems: Physicochemical evaluation of kinetics and adsorption models

This work evaluated kinetic and adsorption physicochemical models for the biosorption process of lanthanum, neodymium, europium, and gadolinium by Sargassum sp. in batch systems. The results showed: (a) the pseudo-second order kinetic model was the best approximation for the experimental data with the metal adsorption initial velocity parameter in 0.042-0.055 mmol.g -1.min-1 (La < Nd < Gd < Eu); (b) the Langmuir adsorption model presented adequate correlation with maximum metal uptake at 0.60-0.70 mmol g-1 (Eu < La < Gd < Nd) and the metal-biomass affinity parameter showed distinct values (Gd < Nd < Eu < La: 183.1, 192.5, 678.3, and 837.3 L g-1, respectively); and (c) preliminarily, the kinetics and adsorption evaluation did not reveal a well-defined metal selectivity behavior for the RE biosorption in Sargassum sp., but they indicate a possible partition among RE studied. © (2009) Trans Tech Publications.