965 resultados para CE-ESI-MS
Resumo:
A high-throughput screening system for secondary catalyst libraries has been developed by incorporation of an 80-pass reactor and a quantified multistream mass spectrometer screening (MSMSS) technique. With a low-melting alloy as the heating medium, a uniform reaction temperature could be obtained in the multistream reactor (maximum temperature differences are less than 1 K at 673 K). Quantification of the results was realized by combination of a gas chromatogram with the MSMSS, which could provide the product selectivities of each catalyst in a heterogeneous catalyst library. Because the catalyst loading of each reaction tube is comparable to that of the conventional microreaction system and because the parallel reactions could be operated under identical conditions (homogeneous temperature, same pressure and WHSV), the reaction results of a promising catalyst selected from the library could be reasonably applied to the further scale-up of the system. The aldol condensation of acetone, with obvious differences in the product distribution over different kind of catalysts, was selected as a model reaction to validate the screening system.
Resumo:
The microstructures and mechanical properties of Mg-6Zn-5Al-4Gd-1RE (RE = Ce or Y) alloys were investigated. The addition of Ce or Y obviously refines the grain size for the Mg-6Zn-5Al-4Gd-based alloy, while the Y element has a better refining effect. The Ce and Y show different grain-refining mechanisms: Ce addition mostly promotes the growth of secondary dendrite, while Y addition mainly increases the heterogeneous nucleation sites.
Resumo:
在水/十六烷基三甲基溴化铵(CTAB)/正丁醇/正辛烷微乳液体系中成功的合成了BaYF5:Ce3+纳米粒子。运用X射线衍射(XRD)、环境扫描电子显微镜(ESEM)和荧光光谱等测试技术对所制备产物进行了表征。
Resumo:
(Y0.95Ln(0.01)Ce(0.04))(3)Al5O12 phosphors were synthesized by high-temperature solid state reaction under reducing atmosphere and the doping effects of lanthanide ions (Ln(3+)) on the luminescence properties of phosphors were studied. YAG: Ce, Ln spectra of excitation and emission show that the influence between Ce3+ and Ln(3+) can be divided into the following three types
Resumo:
Mg-8Gd-0.6Zr-1RE (RE = La or Ce, wt.%) alloys were prepared by casting. The microstructures, age hardening behavior and mechanical properties were investigated. The results show that the addition of 1 wt.% La or Ce to a Mg-8Gd-0.6Zr alloy reduces the dendrite arm spacing and slightly improves the mechanical properties and age hardening response.
Resumo:
Formation and stabilities of four 14-mer intermolecular DNA triplexes, consisting of third strands with repeating sequence CTCT, CCTT, CTT, or TTT, were studied by electrospray ionization Fourier-transform ion cyclotron resonance mass spectrometry (ESI-FTICR-MS) in the gas phase. The gas-phase stabilities of the triplexes were compared with their CD spectra and melting behaviors in solution, and parallel correlation between two phases were obtained. In the presence of 20 mm NH4+ (pH 5.5), the formation of the TTT triplex was not detected in both solution and the gas phase.
Resumo:
利用电喷雾串联质谱(ESI-MSn)技术研究马钱苷的质谱碎裂机理,探讨其碎裂方式,并利用傅立叶变换离子回旋共振质谱(FTICR-MS)及SORI-CID高分辨率、高质量准确度对其碎裂机理进行验证研究。采用H/D交换和串联质谱的方法,发现马钱苷羟基上的活泼氢在质谱中性碎片丢失过程中较易被转移,表现出较大的化学活性。通过加入特定的Na+和Li+等碱金属离子,极大地提高了马钱苷化合物质谱分析的灵敏度,获得了更多的结构信息,建立了马钱苷化合物质谱鉴定和分析的新方法。
Resumo:
采用负离子模式的电喷雾傅立叶变换离子回旋共振质谱(ESI-FTICR-MS)对3个合成的肝素类化合物DHα、THα和THβ进行了全扫描一级谱和持续非共振辐照碰撞诱导解离(SORI-CID)串联质谱分析。样品浓度10μmol/L,流动泵注射直接进样。化合物中的磺酸胺和磺酸酯结构容易在一般电喷雾条件下发生分解,失去一个或者多个SO3,一级全扫描谱图中得到的谱峰均是带有单电荷或者双电荷的准分子离子峰。
Resumo:
In vitro α-glycosidase inhibition assays and Ultrafiltration LC-DAD-ESI-MSn were combined to screening α-glucosidase inhibitors from hawthorn leaves flavonoids extract. As a result, hawthorn leaves flavonoids extract showed strong α-glucosidase inhibitory activity, four compounds presented α-glucosidase inhibitory effects were observed and identified by LC-DAD-MSn, and further confirmed by high resolution SORI-CID FT ICR MS data.
Resumo:
In order to study the properties of Mg-Al-RE (AE) series alloys, the Mg-4Al-4RE-0.4Mn (RE= La, Ce/La mischmetal or Ce) alloys were developed. Their microstructures, tensile properties and corrosion behavior have been investigated. The results show that the phase compositions of Mg-4Al-4La-0.4Mn alloy consist of alpha-Mg and Al11La3 phases. While two binary Al-RE (RE = Ce/La) phases, Al11RE3 and Al2RE, are formed in Mg-4Al-4Ce/La-0.4Mn alloy, and Al11Ce3 and Al2Ce are formed in Mg-4Al-4Ce-0.4Mn alloy.