Desenvolvimento de uma EPS especificação de procedimento de soldagem para união de chapas de aço ASTM A131 com processo FCAW

In any welding process is of utmost importance by welders and responsible qualities of the area understand the process and the variables involved in it, in order to have maximum efficiency in welding both in terms of quality as the final cost , never forgetting, of course, the process conditions which the welder or welding operator shall be submitted. Therefore, we sought to understand the variables relevant to the welding process and develop an EPS (Welding Procedure Specification) as ASME IX for cored wire welding process (FCAW Specification AWS) with shielding gas and automated process for base material ASTM a 131, with 5/16 thick, using a single pass weld, for conditions with pre-and post-heating and the destructive testing for verification and analysis of the resulting weld bead

Avaliação do tempo e da concentração do condicionamento com ácido fluorídrico sobre a resistência de união entre cerâmica e cimento resinoso

The aim of this study was to verify through microtensile test the influence of time and concentration of surface conditioning with hydrofluoric acid and its interference in the adhesion of dual resin cement to porcelain.We used 32 bodies of glass-ceramic lithium disilicate system IPS e.max Press LT with dimensions of 6mm thick, 8 mm in length and 8 mm in length, which will be molded to obtain composite resin blocks corresponding to blocks ceramics. Ceramic and resin blocks were divided into 16 groups (n = 4) and numbered according to the concentration of hydrofluoric acid (2.5%, 5%, 7.5% and 10%) and conditioning time (20 seconds, 40 seconds, 1 minute and 2 minutes). The blocks were cleaned in ultrasonic apparatus with distilled water and dried with compressed air, subjected to acid etching and air-jet washed with water, dried with compressed air and received application of silane agent Monobond-S, followed by adhesive Excite ( Ivoclar Vivaden). Each ceramic block was bonded to the corresponding block of resin through the resin cement Multilink Automix. The specimens were cut to obtain nine micro samples for each set of ceramic-resin with 1 mm X 1 mm X 12 mm in length, which were submitted to microtensile test. The results were analyzed with descriptive statistics and analysis of variance with significance level of 5%, revealing that there were statistically significant (p = 0.000001 <0.05). From the Tukey test can be concluded that etching with hydrofluoric acid and 2.5% for 120 seconds gave the best bond strength, however, no statistical difference between the conditioning with the same acid in the concentration of 5.0% for 20 to 40 seconds

A contribuição de modelos utilizando uma abordagem modelo - código

In a world that is increasingly working with software, the need arises for effective approaches that encourage software reuse. The reuse practice must be aligned to a set of practices, procedures and methodologies that create a stable and high quality product. These questions produce new styles and approaches in the software engineering. In this way, this thesis aims to address concepts related to development and model-driven architecture. The model-driven approach provides significant aspects of the automated development, which helps it with produced models built in the specification phase. The definition of terms such as model, architecture and platform makes the focus becomes clearer, because for MDA and MDD is important to split between technical and business issues. Important processes are covered, so you can highlight the artifacts that are built into each stage of model-driven development. The stages of development: CSM, PIM, PSM and ISM, detailing the purpose of each phase in oriented models, making the end of each stage are gradually produced artifacts that may be specialized. The models are handled by different prospects for modeling, abstracting the concepts and building a set of details that portrays a specific scenario. This retraction can be a graphical or textual representation, however, in most cases is chosen a language modeling, for example, UML. In order to provide a practical view, this dissertation shows some tools that improve the construction of models and the code generate that assists in the development, keeping the documentation systemic. Finally, the paper presents a case study that refers to the theoretical aspects discussed throughout the dissertation, therefore it is expected that the architecture and the model-driven development may be able to explain important features to consider in software engineering

O vazio da união das culturas nipo-brasileira: projeto no bairro da Liberdade-SP

The work aims at an architectural project in the neighborhood of Liberdade in Sao Paulo, from analysis of the spread of Japanese culture in Brazil. Within this theme, the paper focuses on the Japanese urban space and the search for an identity of the Japanese, besides the problems that the neighborhood has. The architectural design is justified by the need for spaces of rest, meetings and green areas, where people can get away a bit of pace that the neighborhood has. The source of this research is based on bibliographic references, reviews of other projects, investigating the experience of urban space and the richest source of contributions that were the memories of living in Japan for eight months. The expected result is the visualization of the project through sketches, experiments and artistic designs for the chosen location

Mídia radical: análise comparativa entre a opinião da grande imprensa e da mídia radical no novo código florestal

The objective of this work is to compare how manifests the ideological positioning in the hegemonic media productions, according to Gramsci's conception, in relation to the radical alternative media, proposed by John Downing. The research has as opinionated content sample printed newspaper O Estado de s. Paulo, contrasting with the expressions of NON-PROFIT bauruense environmental “Instituto Ambiental Vidágua on the proposals of the new Brazilian forest Code. The analysis will hold in an interval between the adoption of the code by the Chamber of deputies in April 2012, and the provisional measure of President Dilma Rousseff with 32 modifications, after vetoing 12 articles proposed initially in may 2012. To support the study, will be crafted Gramsci hegemony; What is the alternative and radical media as it manifests itself; the relationship between the environmental journalism with the environmental NGOs; opinionated journalism and journalistic genres opinionated; theories of journalism and framing of matter

Desenvolvimento de software livre/código aberto no Brasil

O presente trabalho propõe-se a discutir os determinantes do processo de desenvolvimento de software livre, seus efeitos na indústria de software e as ações do governo em relação a estas iniciativas Impulsionados, principalmente, pelos impactos dos avanços nas tecnologias de informação e comunicação e por inovações de processos relacionados a estes progressos, projetos de desenvolvimento de Software Livre/Código Aberto vêm crescendo em ritmo cada vez mais acelerado e tornando-se alvo de estratégias de empresas e políticas públicas. A partir desta constatação, o trabalho procura relacionar o arcabouço teórico que visa explicar estas iniciativas com dados da indústria brasileira de software e verificar como este modelo de produção pode modificar e agregar às suas feições. Foi realizado também um balanço das intervenções do governo brasileiro relacionadas a software livre/código aberto

Análise de algoritmos computacionais utilizados em sistemas de planejamento de braquiterapia de alta taxa de dose: estudo comparativo com o Código MCNP-5C

In radiotherapy, computational systems are used for radiation dose determination in the treatment’s volume and radiometric parameters quality analysis of equipment and field irradiated. Due to the increasing technological advancement, several research has been performed in brachytherapy for different computational algorithms development which may be incorporated to treatment planning systems, providing greater accuracy and confidence in the dose calculation. Informatics and information technology fields undergo constant updating and refinement, allowing the use Monte Carlo Method to simulate brachytherapy source dose distribution. The methodology formalization employed to dosimetric analysis is based mainly in the American Association of Physicists in Medicine (AAPM) studies, by Task Group nº 43 (TG-43) and protocols aimed at dosimetry of these radiation sources types. This work aims to analyze the feasibility of using the MCNP-5C (Monte Carlo N-Particle) code to obtain radiometric parameters of brachytherapy sources and so to study the radiation dose variation in the treatment planning. Simulations were performed for the radiation dose variation in the source plan and determined the dosimetric parameters required by TG-43 formalism for the characterization of the two high dose rate iridium-192 sources. The calculated values were compared with the presents in the literature, which were obtained with different Monte Carlo simulations codes. The results showed excellent consistency with the compared codes, enhancing MCNP-5C code the capacity and viability in the sources dosimetry employed in HDR brachytherapy. The method employed may suggest a possible incorporation of this code in the treatment planning systems provided by manufactures together with the equipment, since besides reducing acquisition cost, it can also make the used computational routines more comprehensive, facilitating the brachytherapy ...

Biodiversidade e código florestal em Botucatu, um estudo de caso

The brazilian legislation has sufored changes by the law no 1876/99, without the scientific community consultation, causing grave consequences for the country natural patrimony. The goal of this research is to investigate what the professors and students community of a São Paulo University know about the theme, as much as a rural and urban portion of persons; what they consider important and which atributes are taken in consideration. By the elaboration of closed questionnaires, qualitative and quantitative datas were collected, organized and analysed. The datas showed a low schooling by the countrified people, which reflected the low forest law knowledge. The distance between the university and society was also noticed, which indicates the lack of extension activities, ethical commitment against knowledge, technology and the sustainable development of the country. Due to, highlight the importance of extension activities towards the university, community and a knowledge future of all

Gigante pela própria natureza: discutindo o código florestal

Não disponível

Análise sobre o comércio entre Brasil e União Européia e as barreiras não tarifárias que o afetam

É notável a importância da União Europeia para o setor exportador brasileiro, principalmente no caso da exportação de carne bovina. Conduto, este comércio bilateral encontra entraves para seu desenvolvimento causados principalmente pela União Europeia, tais como barreiras não tarifárias (barreiras técnicas, sanitárias, fitossanitárias etc) além de exigências acerca de produtos exportados para o mercado europeu por países terceiros, como, por exemplo, medidas de rastreabilidade, certificação, rotulagem e conformidade com regras europeias. Este estudo visa analisar este comércio bilateral, os obstáculos existentes e como o Brasil lida com esta situação

Rotulagem ambiental e sua incidência sobre as exportações brasileiras à União Européia

The study aims at analyzing the potential impacts of environmental labeling programs, emphasizing the European Community program on Brazilian exports to the EU. For this, we traced the historical growth of bilateral relations between the EU and Brazil, which shows a strategic partnership, and then it was listed trade barriers (tariff and nontariff) imposed by these two markets to the international trade relations. Later, the emergence of environmental seals was discussed, as well as their potential barriers to trade. Finally, selected products were analyzed in order to know the potential effects of environmental labeling on products exported by Brazil

Desenvolvimento de um código computacional para simulação e análise de espectros atômicos

The aim of this work was the development a computer code for simulation and analysis of atomic spectra from databases constructed from the literature. There were created four routines that can be useful for spectroscopic studies in the atomic processes of laser isotope separation. In the first routine, Possible Transitions, the program checks the possible electron transitions from an energy level of the atom present in the database considering the selection rules for an electric dipole transition. The second routine, Locator Transitions, checks the possible electronic transitions within a user-specified spectral region. The routine Spectra Simulator creates simulated spectra using the graphical application gnuplot through lorentzian curve and finally, the routine Electronic Temperature determines the temperature of electronic excitation of the atom, thought the Boltzmann Plot Method. To test the reliability of the program there were obtained experimental emission spectra of a hollow cathode discharge of dysprosium and argon as a buffer gas. The hollow cathode discharge has been subjected to different values of operating currents and pressure of inert gas. The spectra obtained were treated with the assistance of program routines developed (Transition Locator and Spectra Simulator) and temperatures electronic excitation of the atoms of dysprosium in the different discharge conditions were calculated (routine Electronic Temperature). The results showed that the electronic excitation temperature of the neutral dysprosium atoms in the hollow cathode discharge increases with increasing current applied to the cathode and also by increasing the gas pressure buffer. The determination coefficients, R2, obtained by the Electronic Temperature routine using the linear adjust of the Boltzmann Plot Method were greater... (Complete abstract click electronic access below)

Concepção e Implementação de um Sistema de Controle de Arborização Urbana através da Integração de Softwares Livres e de Código Aberto

Suitable computacional tools allow to build applications that can link information to its physical location, and represent them into visual and interactive schemes, e ectively reaching the power of visual comunication. This leads the user to synthesize information in a simple and e cient way. These applications are linked to the de nition of Geographic Information System (GIS). GIS are comprised by many concepts and tools, which have the main purpose of collecting, storing, viewing and processing spatial data, obtaining the information needed for decision making. Within this context, this paper presents the Conception and Implementation of a Control System for Urban Forestry through Integration of Free and Open Source Software. This conception arose from the need of an Environmental Project developed by the Agriculture's House of the city of Regente Feij o, which has as main objectives cataloging and management of urban a orestation of the municipality. Due to this diversity of concepts, the challenge in building this system is the integration of platforms that are involved in all stages: collecting and storage of data, including maps and other spatial information, operations on the stored information, obtaining results and graphical visualization of the same. After implementation, it was possible to provide for the system users an improvement in the capacity of perception in the information analysis and facilitate the process of decision making

Estudo sobre os aspectos culturais da terminologia dos contratos de prestação de serviços em língua portuguesa e língua francesa

Pós-graduação em Estudos Linguísticos - IBILCE

Implicações da União Econômica e Monetária Europeia sobre a política econômica dos PIGS: uma análise sobre a crise das dívidas soberanas

The present work intends to analyze the impacts of the European Economic and Monetary Union in the economic policies of the countries named PIGS, with an analysis about the sovereign debt crisis, in view of the autonomy loss to adopt own monetary and exchange rate policies of countries with different levels of development