Tilapia for Biological Control of Giant Salvinia

In August 1999, giant salvinia ( Salvinia molesta Mitchell) was found along the lower Colorado River in irrigation drainages. To investigate the slow spread and apparent control of giant salvinia in this region, the herbivorous fish, tilapia (Oreochromis niloticus Trewavas), was examined as a biological control agent. The study was conducted in a 5,000-L recirculating system. (PDF contains 4 pages.)

Clearigate ® Treatments for Control of Giant Salvinia

Results of recent field trials using the chelated copper formulation Clearigate® 4 showed that applying a 20% solution by volume was effective for controlling populations of giant salvinia in irrigation canals. 5 Lower rates may be efficacious, thereby reducing chemical use and cost; however, little is known about the dose-response effects of Clearigate® against giant salvinia. The objective of this study was to determine the effective rate range of chelated copper applied as Clearigate® for control of giant salvinia.

Inland fisheries resources and the current status of aquaculture in Sri Lanka

The aim of this working paper was to evaluate the potential of different fisheries enhancement and aquacultural systems to benefit marginal farmers who manage small rainfed irrigation systems in the lowland Dry zone of Sri Lanka. Analysis was based on secondary data and key informant interviews with professional fishermen and marginal farmers in N.W Province. [PDF contains 57 pages]

Sustainable energy solutions for irrigation and harvesting in developing countries

One of the critical problems currently being faced by agriculture industry in developing nations is the alarming rate of groundwater depletion. Irrigation accounts for over 70% of the total groundwater withdrawn everyday. Compounding this issue is the use of polluting diesel generators to pump groundwater for irrigation. This has made irrigation not only the biggest consumer of groundwater but also one of the major contributors to green house gases. The aim of this thesis is to present a solution to the energy-water nexus. To make agriculture less dependent on fossil fuels, the use of a solar-powered Stirling engine as the power generator for on-farm energy needs is discussed. The Stirling cycle is revisited and practical and ideal Stirling cycles are compared. Based on agricultural needs and financial constraints faced by farmers in developing countries, the use of a Fresnel lens as a solar-concentrator and a Beta-type Stirling engine unit is suggested for sustainable power generation on the farms. To reduce the groundwater consumption and to make irrigation more sustainable, the conceptual idea of using a Stirling engine in drip irrigation is presented. To tackle the shortage of over 37 million tonnes of cold-storage in India, the idea of cost-effective solar-powered on-farm cold storage unit is discussed.

Environmental Concerns in Water Pricing Policy: an Application of Data Envelopment Analysis (DEA)

25 p.

On the behavior of pliable plate dynamics in wind : application to vertical axis wind turbines

Numerous studies have shown that flexible materials improve resilience and durability of a structure. Several studies have investigated the behavior of elastic plates under the influence of a free stream, such as studies of the fluttering flag and others of shape reconfiguration, due to a free stream.

The principle engineering contribution of this thesis is the design and development of a vertical axis wind turbine that features pliable blades which undergo various modes of behavior, ultimately leading to rotational propulsion of the turbine. The wind turbine design was tested in a wind tunnel and at the Caltech Laboratory for Optimized Wind Energy. Ultimately, the flexible blade vertical axis wind turbine proved to be an effective way of harnessing the power of the wind.

In addition, this body of work builds on the current knowledge of elastic cantilever plates in a free stream flow by investigating the inverted flag. While previous studies have focused on the fluid structure interaction of a free stream on elastic cantilever plates, none had studied the plate configuration where the trailing edge was clamped, leaving the leading edge free to move. Furthermore, the studies presented in this thesis establish the geometric boundaries of where the large-amplitude flapping occurs.

Aerodynamics of vertical-axis wind turbines in full-scale and laboratory-scale experiments

Within a wind farm, multiple turbine wakes can interact and have a substantial effect on the overall power production. This makes an understanding of the wake recovery process critically important to optimizing wind farm efficiency. Vertical-axis wind turbines (VAWTs) exhibit features that are amenable to dramatically improving this efficiency. However, the physics of the flow around VAWTs is not well understood, especially as it pertains to wake interactions, and it is the goal of this thesis to partially fill this void. This objective is approached from two broadly different perspectives: a low-order view of wind farm aerodynamics, and a detailed experimental analysis of the VAWT wake.

One of the contributions of this thesis is the development of a semi-empirical model of wind farm aerodynamics, known as the LRB model, that is able to predict turbine array configurations to leading order accuracy. Another contribution is the characterization of the VAWT wake as a function of turbine solidity. It was found that three distinct regions of flow exist in the VAWT wake: (1) the near wake, where periodic blade shedding of vorticity dominates; (2) a transition region, where growth of a shear-layer instability occurs; (3) the far wake, where bluff-body oscillations dominate. The wake transition can be predicted using a new parameter, the dynamic solidity, which establishes a quantitative connection between the wake of a VAWT and that of a circular cylinder. The results provide insight into the mechanism of the VAWT wake recovery and the potential means to control it.

Guidelines for the scoping and environmental assessment of water resources projects. The environment and water resources projects - Volume 1

The following brief is to ensure standard criteria and format are used for the scoping and environmental assessment of water resources projects leading to the production of an environmental report or Environmental Statement. This volume is one of a series giving guidance on water resources projects. The water resources projects will predominantly comprise drought orders and permits, time limited and permanent licences. Smaller projects, such as spray irrigation licences, will not require an environmental assessment. This document forms the basis for discussions between the Environment Agency North East Region, consultees and the applicant. The process aims to produce a thorough assessment. Each section addresses consecutive elements of the assessment process. Section 2 outlines the structure for a scoping document, section 3 outlines the structure for an Environmental Statement and section 4 gives guidance on the role of an Environmental Action Plan. Appendices 1 and 2 should be used in conjunction with the scoping process and cover a wide range of aspects. However, some projects may not require all of them to be included, whilst for others, the inclusion of additional factors may be appropriate.