Sistemas agrícolas sustentáveis para regiões semi-áridas.

Resumo: A maioria dos sistemas de produção em prática no trópico semi-árido brasileiro pela agricultura familiar apresenta baixa ou nenhuma sustentabilidade, devido ao uso de tecnologias quase sempre agressivas ao ecossistema. Como consequência, observa-se, nos sertões nordestinos degradação ambiental generalizada, baixa produtividade das atividades agrícolas, pastoris e madeireiras, inviabilização da agricultura, queda da qualidade devida e êxodo rural acentuado. Urge, pois, que se forneça ao agricultor alternativas de sistemas de produção sustentáveis que atendam a quatro objetivos, quais sejam, a fixação da agricultura migratória, a adequação do manejo pastoril, a racionalização da produção de madeira e a uma forte integração dessas atividades. Para tanto, deve-se: excluir as queimadas, substituir o desmatamento pelo raleamento da vegetação lenhosa, manter um aporte substancial de matéria orgânica, utilizar Ieguminosas como fonte de adubo verde, ajustar a carga animal para a capacidade de suporte da área e adotar-se o corte seletivo e manejo da rebrota na exploração madeireira. A adoção dessas tecnologias na certa contribuirá: para a viabilização ecológica, social e econômica da agricultura familiar nos serões nordestinos, para a sustação dos processos de degradação ambiental, para a melhoria da qualidade de vida da população e para a redução do êxodo rural.

Melhoramento genético participativo: uma nova perspectiva para o manejo da diversidade genética do semi-árido nordestino.

2004

Estudo de caso da eficiência econômica e viabilidade financeira da produção de morango em sistema semi-hidropônico.

2011

Levantamento pedológico semi-detalhado (1:30.000) do Parque Estadual da Mata Seca, Município de Manga - MG.

Um dos pré-requisitos para o sucesso na seleção e implantação de áreas de pesquisa é o conhecimento preciso da distribuição dos solos e de seus atributos na paisagem. Isso pode ser obtido com o levantamento e mapeamento pedológico convencional e/ou através de técnicas de mapeamento digital de solos (MDS). Este trabalho apresenta os solos identificados no Parque Estadual da Mata Seca (PEMS), localizado no município de Manga, região norte do Estado de Minas Gerais. É parte integrante de um projeto maior, cujo objetivo é explorar novas técnicas de MDS em pequenas extensões territoriais, avaliar e validar seus produtos e estabelecer um protocolo de procedimentos para tal. Abrangendo a extensão de 10.281,44 ha, o PEMS tem sua geologia associada a coberturas cenozóicas derivadas de: (a) rochas pelíticocarbonáticas que compõem o Grupo Bambuí, de idade proterozóica, (b) arenitos cretáceos do Grupo Urucuia e, (c) depósitos quarternários resultantes do retrabalhamento do rio São Francisco. Os tipos e diversidade de material de origem foram os fatores preponderantes na formação e distribuição dos solos e na sua relação com os demais elementos formadores da paisagem local. Em termos gerais, a seguinte relação solo-paisagem pode ser observada na área: Latossolos Amarelos e Vermelho-Amarelos distróficos e de textura média ocupam os platôs (chapada) de relevo predominantemente plano, situados nas cotas mais elevadas do PEMS e sob domínio das coberturas relacionadas aos arenitos do Grupo Urucuia. A vegetação de Carrasco é exclusiva e marcante dessa paisagem, seja observando-a in loco, seja por meio de imagens de sensores remotos. Há uma faixa transicional entre esses domínios e aqueles situados em cotas ligeiramente inferiores, que são influenciados exclusivamente pelas rochas calcárias. A existência de eutrofismo associado à textura média em Latossolos Vermelho-Amarelos, Vermelhos, Chernossolos e Cambissolos (latossólicos), bem como a vegetação de Caatinga Arbórea Densa (de médio porte) são evidências do caráter transicional. As paisagens sob domínio das rochas pelítico-carbonáticas em que se desenvolve a Floresta Estacional Decidual Densa de alto porte (Mata Seca) são de maior extensão e complexidade na área. Nelas, o relevo e a proximidade do material de origem exercem ação modificadora na formação dos solos. As seguintes subordens taxonômicas foram observadas nesse domínio fisiográfico:Cambissolos Háplicos, Latossolos Vermelhos e Vermelhos-Amarelos, Chernossolos Háplicos e Argilúvicos, Vertissolos Háplicos, Plintossolos Pétricos, Gleissolos Háplicos e Melânicos. Dentre estas, os Latossolos Vermelho- Amarelos e Vermelhos juntamente aos Cambissolos Háplicos dominam em extensão, distribuindo-se em aproximadamente 87,0% das áreas sob influência calcária. Finalmente, nos depósitos quaternários do rio São Francisco, em relevo plano e sob Floresta Tropical Pluvial Perenifólia, foram mapeados Cambissolos Flúvicos e Neossolos Flúvicos em condições de boa drenagem, enquanto os Gleissolos Háplicos ocorrem nas áreas deprimidas, permanente ou temporariamente inundadas.

Semi-Supervised OWA Aggregation for Link-Based Similarity Evaluation and Alias Detection

T.Boongoen and Q. Shen. Semi-Supervised OWA Aggregation for Link-Based Similarity Evaluation and Alias Detection. Proceedings of the 18th International Conference on Fuzzy Systems (FUZZ-IEEE'09), pp. 288-293, 2009. Sponsorship: EPSRC

Birkhoff normal forms in semi-classical inverse problems

Iantchenko, A.; Sj?strand, J.; Zworski, M., (2002) 'Birkhoff normal forms in semi-classical inverse problems', Mathematical Research Letters 9(3) pp.337-362 RAE2008

Quasi -symmetric designs with good blocks and intersection number one

Mavron, Vassili; McDonough, T.P.; Schrikhande, M.S., (2003) 'Quasi -symmetric designs with good blocks and intersection number one', Designs Codes and Cryptography 28(2) pp.147-162 RAE2008

Generalized semi-geostrophic theory on a sphere

Douglas, Robert; Cullen, M.J.P.; Roulston, I.; Sewell, M.J., (2005) 'Generalized semi-geostrophic theory on a sphere', Journal of Fluid Mechanics 531 pp.123-157 RAE2008

Non-tactical symmetric nets

Mavron, Vassili; Al-Kenani, A.N., (2003) 'Non-tactical symmetric nets', Journal of the London Mathematical Society 67(2) pp.273-288 RAE2008

Klaster Bibliotek Bi@lskich próbą poszukiwania płaszczyzn synergii lokalnych bibliotek

W części wprowadzającej artykułu pokrótce przedstawiono koncepcję i typologię klastrów, a także cechy wspólne i różnice między klastrami a organizacjami sieciowymi. Prezentowane w drugiej części artykułu zagadnienia dotyczą szeroko rozumianego zarządzania: strategii powstawania klastra, barier rozwoju, czynników decydujących o powodzeniu projektu i korzyści wynikających z jego funkcjonowania w otoczeniu lokalnym. W części końcowej zaprezentowano przykłady współdziałania uczestników klastra wyzwalające efekt synergii.

A General Theory of Semi-Unification

Various restrictions on the terms allowed for substitution give rise to different cases of semi-unification. Semi-unification on finite and regular terms has already been considered in the literature. We introduce a general case of semi-unification where substitutions are allowed on non-regular terms, and we prove the equivalence of this general case to a well-known undecidable data base dependency problem, thus establishing the undecidability of general semi-unification. We present a unified way of looking at the various problems of semi-unification. We give some properties that are common to all the cases of semi-unification. We also the principality property and the solution set for those problems. We prove that semi-unification on general terms has the principality property. Finally, we present a recursive inseparability result between semi-unification on regular terms and semi-unification on general terms.

Application of semi-automated strain analysis techniques and anisotropy of magnetic susceptibility in fold and thrust belts

Quantitative analysis of penetrative deformation in sedimentary rocks of fold and thrust belts has largely been carried out using clast based strain analysis techniques. These methods analyse the geometric deviations from an original state that populations of clasts, or strain markers, have undergone. The characterisation of these geometric changes, or strain, in the early stages of rock deformation is not entirely straight forward. This is in part due to the paucity of information on the original state of the strain markers, but also the uncertainty of the relative rheological properties of the strain markers and their matrix during deformation, as well as the interaction of two competing fabrics, such as bedding and cleavage. Furthermore one of the single largest setbacks for accurate strain analysis has been associated with the methods themselves, they are traditionally time consuming, labour intensive and results can vary between users. A suite of semi-automated techniques have been tested and found to work very well, but in low strain environments the problems discussed above persist. Additionally these techniques have been compared to Anisotropy of Magnetic Susceptibility (AMS) analyses, which is a particularly sensitive tool for the characterisation of low strain in sedimentary lithologies.

Theory of the electronic and optical properties of dilute bismide alloys

Dilute bismide alloys, containing small fractions of bismuth (Bi), have recently attracted interest due to their potential for applications in a range of semiconductor devices. Experiments have revealed that dilute bismide alloys such as GaBixAs1−x, in which a small fraction x of the atoms in the III-V semiconductor GaAs are replaced by Bi, exhibit a number of unusual and unique properties. For example, the band gap energy (E g) decreases rapidly with increasing Bi composition x, by up to 90 meV per % Bi replacing As in the alloy. This band gap reduction is accompanied by a strong increase in the spin-orbit-splitting energy (ΔSO) with increasing x, and both E g and ΔSO are characterised by strong, composition-dependent bowing. The existence of a ΔSO > E g regime in the GaBixAs1−x alloy has been demonstrated for x ≳10%, a band structure condition which is promising for the development of highly efficient, temperature stable semiconductor lasers that could lead to large energy savings in future optical communication networks. In addition to their potential for specific applications, dilute bismide alloys have also attracted interest from a fundamental perspective due to their unique properties. In this thesis we develop the theory of the electronic and optical properties of dilute bismide alloys. By adopting a multi-scale approach encompassing atomistic calculations of the electronic structure using the semi-empirical tight-binding method, as well as continuum calculations based on the k•p method, we develop a fundamental understanding of this unusual class of semiconductor alloys and identify general material properties which are promising for applications in semiconductor optoelectronic and photovoltaic devices. By performing detailed supercell calculations on both ordered and disordered alloys we explicitly demonstrate that Bi atoms act as isovalent impurities when incorporated in dilute quantities in III-V (In)GaAs(P) materials, strongly perturbing the electronic structure of the valence band. We identify and quantify the causes and consequences of the unusual electronic properties of GaBixAs1−x and related alloys, and our analysis is reinforced throughout by a series of detailed comparisons to the results of experimental measurements. Our k•p models of the band structure of GaBixAs1−x and related alloys, which we derive directly from detailed atomistic calculations, are ideally suited to the study of dilute bismide-based devices. We focus in the latter part of the thesis on calculations of the electronic and optical properties of dilute bismide quantum well lasers. In addition to developing an understanding of the effects of Bi incorporation on the operational characteristics of semiconductor lasers, we also present calculations which have been used explicitly in designing and optimising the first generation of GaBixAs1−x-based devices.

Design principles for an enterprise systems chartering method

Our research follows a design science approach to develop a method that supports the initialization of ES implementation projects – the chartering phase. This project phase is highly relevant for implementation success, but is understudied in IS research. In this paper, we derive design principles for a chartering method based on a systematic review of ES implementation literature and semi-structured expert interviews. Our analysis identifies differences in the importance of certain success factors depending on the system type. The proposed design principles are built on these factors and are linked to chartering key activities. We specifically consider system-type-specific chartering aspects for process-centric Business Intelligence & Analytics (BI&A) systems, which are an emerging class of systems at the intersection of BI&A and business process management. In summary, this paper proposes design principles for a chartering method – considering specifics of process-centric BI&A.

Self-organized vegetation patterning as a fingerprint of climate and human impact on semi-arid ecosystems

Spatially periodic vegetation patterns are well known in arid and semi-arid regions around the world. Mathematical models have been developed that attribute this phenomenon to a symmetry-breaking instability. Such models are based on the interplay between competitive and facilitative influences that the vegetation exerts on its own dynamics when it is constrained by arid conditions, but evidence for these predictions is still lacking. Moreover, not all models can account for the development of regularly spaced spots of bare ground in the absence of a soil prepattern. We applied Fourier analysis to high-resolution, remotely sensed data taken at either end of a 40-year interval in southern Niger. Statistical comparisons based on this textural characterization gave us broad-scale evidence that the decrease in rainfall over recent decades in the sub-Saharan Sahel has been accompanied by a detectable shift from homogeneous vegetation cover to spotted patterns marked by a spatial frequency of about 20 cycles km-1. Wood cutting and grazing by domestic animals have led to a much more marked transition in unprotected areas than in a protected reserve. Field measurements demonstrated that the dominant spatial frequency was endogenous rather than reflecting the spatial variation of any pre-existing heterogeneity in soil properties. All these results support the use of models that can account for periodic vegetation patterns without invoking substrate heterogeneity or anisotropy, and provide new elements for further developments, refinements and tests. This study underlines the potential of studying vegetation pattern properties for monitoring climatic and human impacts on the extensive fragile areas bordering hot deserts. Explicit consideration of vegetation self-patterning may also improve our understanding of vegetation and climate interactions in arid areas. © 2006 The Authors.