Standard Errors for the Blinder-Oaxaca Decomposition

The decomposition technique introduced by Blinder (1973) and Oaxaca (1973) is widely used to study outcome differences between groups. For example, the technique is commonly applied to the analysis of the gender wage gap. However, despite the procedure's frequent use, very little attention has been paid to the issue of estimating the sampling variances of the decomposition components. We therefore suggest an approach that introduces consistent variance estimators for several variants of the decomposition. The accuracy of the new estimators under ideal conditions is illustrated with the results of a Monte Carlo simulation. As a second check, the estimators are compared to bootstrap results obtained using real data. In contrast to previously proposed statistics, the new method takes into account the extra variation imposed by stochastic regressors.

Sources of Regional Income Disparity in Rural Vietnam: Oaxaca-Blinder Decomposition

This paper investigates determinants of regional income disparity in rural Vietnam, with special emphasis placed on the roles of human capital and land. We apply a decomposition method, suggested by Oaxaca and Blinder. We found that returns to assets rather than endowments, especially those of human capital, are one of the leading factors to account for income differences across regions. We also found that substantial improvements of returns to human capital in the Red River delta region are a driving force to catch up with Mekong River delta region. Unexpectedly, differences in land endowment do not strongly correlate with regional income disparity because better access to land in a region was partially offset by lower returns.

Application of the Input-Output Decomposition Technique to China's Regional Economies

Structural decomposition techniques based on input-output table have become a widely used tool for analyzing long term economic growth. However, due to limitations of data, such techniques have never been applied to China's regional economies. Fortunately, in 2003, China's Interregional Input-Output Table for 1987 and Multi-regional Input-Output Table for 1997 were published, making decomposition analysis of China's regional economies possible. This paper first estimates the interregional input-output table in constant price by using an alternative approach: the Grid-Search method, and then applies the standard input-output decomposition technique to China's regional economies for 1987-97. Based on the decomposition results, the contributions to output growth of different factors are summarized at the regional and industrial level. Furthermore, interdependence between China's regional economies is measured and explained by aggregating the decomposition factors into the intraregional multiplier-related effect, the feedback-related effect, and the spillover-related effect. Finally, the performance of China's industrial and regional development policies implemented in the 1990s is briefly discussed based on the analytical results of the paper.

Application of factor decomposition techniques to vertical specialisation measurements

The increasing importance of vertical specialisation (VS) trade has been a notable feature of rapid economic globalisation and regional integration. In an attempt to understand countries’ depth of participation in global production chains, many Input-Output based VS indicators have been developed. However, most of them focus on showing the overall magnitude of a country’s VS trade, rather than explaining the roles that specific sectors or products play in VS trade and what factors make the VS change over time. Changes in vertical specialisation indicators are, in fact, determined by mixed and complex factors such as import substitution ratios, types of exported goods and domestic production networks. In this paper, decomposition techniques are applied to VS measurement based on the OECD Input-Output database. The decomposition results not only help us understand the structure of VS at detailed sector and product levels, but also show us the contributions of trade dependency, industrial structures of foreign trade and domestic production system to a country’s vertical specialisation trade.

Factor decomposition of income inequality change : Japan's regional income disparity from 1955 to 1998

We propose a method for the decomposition of inequality changes based on panel data regression. The method is an efficient way to quantify the contributions of variables to changes of the Theil T index while satisfying the property of uniform addition. We illustrate the method using prefectural data from Japan for the period 1955 to 1998. Japan experienced a diminishing of regional income disparity during the years of high economic growth from 1955 to 1973. After estimating production functions using panel data for prefectures in Japan, we apply the new decomposition approach to identify each production factor’s contributions to the changes of per capita income inequality among prefectures. The decomposition results show that total factor productivity (residual) growth, population change (migration), and public capital stock growth contributed to the diminishing of per capita income disparity.

Allocation efficiency in China : an extension of the dynamic Olley-Pakes productivity decomposition

This paper develops a quantitative measure of allocation efficiency, which is an extension of the dynamic Olley-Pakes productivity decomposition proposed by Melitz and Polanec (2015). The extended measure enables the simultaneous capture of the degree of misallocation within a group and between groups and parallel to capturing the contribution of entering and exiting firms to aggregate productivity growth. This measure empirically assesses the degree of misallocation in China using manufacturing firm-level data from 2004 to 2007. Misallocation among industrial sectors has been found to increase over time, and allocation efficiency within an industry has been found to worsen in industries that use more capital and have firms with relatively higher state-owned market shares. Allocation efficiency among three ownership sectors (state-owned, domestic private, and foreign sectors) tends to improve in industries wherein the market share moves from a less-productive state-owned sector to a more productive private sector.

An optimization method for conceptual design in engineering systems based on high order singular value decomposition

Se presenta un nuevo método de diseño conceptual en Ingeniería Aeronáutica basado el uso de modelos reducidos, también llamados modelos sustitutos (‘surrogates’). Los ingredientes de la función objetivo se calculan para cada indiviudo mediante la utilización de modelos sustitutos asociados a las distintas disciplinas técnicas que se construyen mediante definiciones de descomposición en valores singulares de alto orden (HOSVD) e interpolaciones unidimensionales. Estos modelos sustitutos se obtienen a partir de un número limitado de cálculos CFD. Los modelos sustitutos pueden combinarse, bien con un método de optimización global de tipo algoritmo genético, o con un método local de tipo gradiente. El método resultate es flexible a la par que mucho más eficiente, computacionalmente hablando, que los modelos convencionales basados en el cálculo directo de la función objetivo, especialmente si aparecen un gran número de parámetros de diseño y/o de modelado. El método se ilustra considerando una versión simplificada del diseño conceptual de un avión. Abstract An optimization method for conceptual design in Aeronautics is presented that is based on the use of surrogate models. The various ingredients in the target function are calculated for each individual using surrogates of the associated technical disciplines that are constructed via high order singular value decomposition and one dimensional interpolation. These surrogates result from a limited number of CFD calculated snapshots. The surrogates are combined with an optimization method, which can be either a global optimization method such as a genetic algorithm or a local optimization method, such as a gradient-like method. The resulting method is both flexible and much more computationally efficient than the conventional method based on direct calculation of the target function, especially if a large number of free design parameters and/or tunablemodeling parameters are present. The method is illustrated considering a simplified version of the conceptual design of an aircraft empennage.

Airport Taxi Planning: Lagrangian Decomposition

The airport taxi planning (TP) module is a decision tool intended to guide airport surface management operations. TP is defined by a flow network optimization model that represents flight ground movements and improves aircraft taxiing routes and schedules during periods of aircraft congestion. TP is not intended to operate as a stand‐alone tool for airport operations management: on the contrary, it must be used in conjunction with existing departing and arriving traffic tools and overseen by the taxi planner of the airport, also known as the aircraft ground controller. TP must be flexible in order to accommodate changing inputs while maintaining consistent routes and schedules already delivered from past executions. Within this dynamic environment, the execution time of TP may not exceed a few minutes. Classic methods for solving binary multi‐commodity flow networks with side constraints are not efficient enough; therefore, a Lagrangian decomposition methodology has been adapted to solve it. We demonstrate TP Lagrangian decomposition using actual data from the Madrid‐Barajas Airport

An interpolation tool for aerodynamic mesh deformation problems based on octree decomposition

Desarrollo de algoritmo de interpolación basado en descomposición octree y funciones radiales de soporte compacto para movimiento de mallas en problemas aerolásticos

Decomposition driven interface evolution for layers of binary mixtures: I. Model dirivation and base states

A dynamical model is proposed to describe the coupled decomposition and profile evolution of a free surfacefilm of a binary mixture. An example is a thin film of a polymer blend on a solid substrate undergoing simultaneous phase separation and dewetting. The model is based on model-H describing the coupled transport of the mass of one component (convective Cahn-Hilliard equation) and momentum (Navier-Stokes-Korteweg equations) supplemented by appropriate boundary conditions at the solid substrate and the free surface. General transport equations are derived using phenomenological nonequilibrium thermodynamics for a general nonisothermal setting taking into account Soret and Dufour effects and interfacial viscosity for the internal diffuse interface between the two components. Focusing on an isothermal setting the resulting model is compared to literature results and its base states corresponding to homogeneous or vertically stratified flat layers are analyzed.

Decomposition driven interface evolution for layers of binary mixtures: I. Model dirivation and base states

Algebraic topology (homology) is used to analyze the state of spiral defect chaos in both laboratory experiments and numerical simulations of Rayleigh-Bénard convection. The analysis reveals topological asymmetries that arise when non-Boussinesq effects are present. The asymmetries are found in different flow fields in the simulations and are robust to substantial alterations to flow visualization conditions in the experiment. However, the asymmetries are not observable using conventional statistical measures. These results suggest homology may provide a new and general approach for connecting spatiotemporal observations of chaotic or turbulent patterns to theoretical models.

Overal reaction rate and stoichiometry for thermal decomposition of hydrazine

An asymptotic analysîs of the Eberstein-Glassman kinetic mechanlsm for the thermal décomposition of hydrazine is carried out. It is shown that at températures near 800°K and near 1000°K,and for hydrazine molar fractions of the order of unity, 10-2 the entire kinetics reduces to a single, overall reaction. Characteristic times for the chemical relaxation of ail active, intermediate species produced in the décomposition, and for the overall reaction, are obtained. Explicit expressions for the overall reaction rate and stoichiometry are given as functions of température, total molar concentration (or pressure)and hydrazine molar fraction. Approximate, patched expressions can then be obtained for values of température and hydrazine molar fraction between 750 and 1000°K, and 1 and 10-3 respectively.

Optimization methods for the operating room management under uncertainty: stochastic programming vs. decomposition approach

The operating theatres are the engine of the hospitals; proper management of the operating rooms and its staff represents a great challenge for managers and its results impact directly in the budget of the hospital. This work presents a MILP model for the efficient schedule of multiple surgeries in Operating Rooms (ORs) during a working day. This model considers multiple surgeons and ORs and different types of surgeries. Stochastic strategies are also implemented for taking into account the uncertain in surgery durations (pre-incision, incision, post-incision times). In addition, a heuristic-based methods and a MILP decomposition approach is proposed for solving large-scale ORs scheduling problems in computational efficient way. All these computer-aided strategies has been implemented in AIMMS, as an advanced modeling and optimization software, developing a user friendly solution tool for the operating room management under uncertainty.