SEM, EDS and vibrational spectroscopic study of dawsonite NaAl(CO3)(OH)2

In this work we have studied the mineral dawsonite by using a combination of scanning electron microscopy with EDS and vibrational spectroscopy. Single crystals show an acicular habitus forming aggregates with a rosette shape. The chemical analysis shows a phase composed of C, Al, and Na. Two distinct Raman bands at 1091 and 1068 cm−1 are assigned to the CO32− ν1 symmetric stretching mode. Multiple bands are observed in both the Raman and infrared spectra in the antisymmetric stretching and bending regions showing that the symmetry of the carbonate anion is reduced and in all probability the carbonate anions are not equivalent in the dawsonite structure. Multiple OH deformation vibrations centred upon 950 cm−1 in both the Raman and infrared spectra show that the OH units in the dawsonite structure are non-equivalent. Raman bands observed at 3250, 3283 and 3295 cm−1 are assigned to OH stretching vibrations. The position of these bands indicates strong hydrogen bonding of the OH units in the dawsonite structure. The formation of the mineral dawsonite has the potential to offer a mechanism for the geosequestration of greenhouse gases.

The effect of topical adrenergic and anticholinergic agents on the choroidal thickness of young healthy adults

The human choroid is capable of rapidly changing its thickness in response to a variety of stimuli. However little is known about the role of the autonomic nervous system in the regulation of the thickness of the choroid. Therefore, we investigated the effect of topical parasympatholytic and sympathomimetic agents upon the choroidal thickness and ocular biometrics of young healthy adult subjects. Fourteen subjects (mean age 27.9 ± 4 years) participated in this randomized, single-masked, placebo-controlled study. Each subject had measurements of choroidal thickness (ChT) and ocular biometrics of their right eye taken before, and then 30 and 60 min following the administration of topical pharmacological agents. Three different drugs: 2% homatropine hydrobromide, 2.5% phenylephrine hydrochloride and a placebo (0.3% hydroxypropyl methylcellulose) were tested in all subjects; each on different days (at the same time of the day) in randomized order. Participants were masked to the pharmacological agent being used at each testing session. The instillation of 2% homatropine resulted in a small but significant increase in subfoveal ChT at 30 and 60 min after drug instillation (mean change 7 ± 3 μm and 14 ± 2 μm respectively; both p < 0.0001). The parafoveal choroid also exhibited a similar magnitude, significant increase in thickness with time after 2% homatropine (p < 0.001), with a mean change of 7 ± 0.3 μm and 13 ± 1 μm (in the region located 0.5 mm from the fovea center), 6 ± 1 μm and 12.5 ± 1 μm (1 mm from the fovea center) and 6 ± 2 μm and 12 ± 2 μm (1.5 mm from the fovea center) after 30 and 60 min respectively. Axial length decreased significantly 60 min after homatropine (p < 0.01). There were also significant changes in lens thickness (LT) and anterior chamber depth (ACD) (p < 0.05) associated with homatropine instillation. No significant changes in choroidal thickness, or ocular biometrics were found after 2.5% phenylephrine or placebo at any examination points (p > 0.05). In human subjects, significant increases in subfoveal and parafoveal choroidal thickness occurred after administration of 2% homatropine and this implies an involvement of the parasympathetic system in the control of choroidal thickness in humans.

Factors influencing bike share membership : an analysis of Melbourne and Brisbane

The number of bike share programs has increased rapidly in recent years and there are currently over 700 programs in operation globally. Australia’s two bike share programs have been in operation since 2010 and have significantly lower usage rates compared to Europe, North America and China. This study sets out to understand and quantify the factors influencing bike share membership in Australia’s two bike share programs located in Melbourne and Brisbane. An online survey was administered to members of both programs as well as a group with no known association with bike share. A logistic regression model revealed several significant predictors of membership including reactions to mandatory helmet legislation, riding activity over the previous month, and the degree to which convenience motivated private bike riding. In addition, respondents aged 18 - 34 and having docking station within 250m of their workplace were found to be statistically significant predictors of bike share membership. Finally, those with relatively high incomes increased the odds of membership. These results provide insight as to the relative influence of various factors impacting on bike share membership in Australia. The findings may assist bike share operators to maximize membership potential and help achieve the primary goal of bike share – to increase the sustainability of the transport system.

Comparison of nanostructures obtained from galvanic replacement in water and an ionic liquid for applications in electrocatalysis and SERS

We demonstrate potential applications for unusual dendrite like Au–Ag alloy nanoparticles formed via a galvanic replacement reaction in the ionic liquid [BMIM][BF4]. In comparison to Au–Ag alloy nanoshells synthesised via a similar reaction in water, the unusual branched structure of the dendritic materials led to increased electrocatalytic activity for the oxidation of both formaldehyde and hydrazine, and increased sensitivity and spectral resolution for the surface enhanced Raman scattering (SERS) of 4,4-bipyridal.

Incidence, risk factors and estimates of a woman's risk of developing secondary lower limb lymphedema and lymphedema-specific supportive care needs in women treated for endometrial cancer

Objectives: Few studies have assessed the risk and impact of lymphedema among women treated for endometrial cancer. We aimed to quantify cumulative incidence of, and risk factors for developing lymphedema following treatment for endometrial cancer and estimate absolute risk for individuals. Further, we report unmet needs for help with lymphedema-specific issues. Methods: Women treated for endometrial cancer (n = 1243) were followed-up 3–5 years after diagnosis; a subset of 643 completed a follow-up survey that asked about lymphedema and lymphedema-related support needs. We identified a diagnosis of secondary lymphedema from medical records or self-report. Multivariable logistic regression was used to evaluate risk factors and estimates. Results: Overall, 13% of women developed lymphedema. Risk varied markedly with the number of lymph nodes removed and, to a lesser extent, receipt of adjuvant radiation or chemotherapy treatment, and use of nonsteroidal anti-inflammatory drugs (pre-diagnosis). The absolute risk of developing lymphedema was > 50% for women with 15 + nodes removed and 2–3 additional risk factors, 30–41% for those with 15 + nodes removed plus 0–1 risk factors or 6–14 nodes removed plus 3 risk factors, but ≤ 8% for women with no nodes removed or 1–5 nodes but no additional risk factors. Over half (55%) of those who developed lymphedema reported unmet need(s), particularly with lymphedema-related costs and pain. Conclusion: Lymphedema is common; experienced by one in eight women following endometrial cancer. Women who have undergone lymphadenectomy have very high risks of lymphedema and should be informed how to self-monitor for symptoms. Affected women need greater levels of support.

Unusually cold and dry winters increase mortality in Australia

Seasonal patterns in mortality have been recognised for decades, with a marked excess of deaths in winter, yet our understanding of the causes of this phenomenon is not yet complete. Research has shown that low and high temperatures are associated with increased mortality independently of season; however, the impact of unseasonal weather on mortality has been less studied. In this study, we aimed to determine if unseasonal patterns in weather were associated with unseasonal patterns in mortality. We obtained daily temperature, humidity and mortality data from 1988 to 2009 for five major Australian cities with a range of climates. We split the seasonal patterns in temperature, humidity and mortality into their stationary and non-stationary parts. A stationary seasonal pattern is consistent from year-to-year, and a non-stationary pattern varies from year-to-year. We used Poisson regression to investigate associations between unseasonal weather and an unusual number of deaths. We found that deaths rates in Australia were 20–30% higher in winter than summer. The seasonal pattern of mortality was non-stationary, with much larger peaks in some winters. Winters that were colder or drier than a typical winter had significantly increased death risks in most cities. Conversely summers that were warmer or more humid than average showed no increase in death risks. Better understanding the occurrence and cause of seasonal variations in mortality will help with disease prevention and save lives.

Association between Australian-Indian mothers' controlling feeding practices and children's appetite traits

This cross-sectional study examined the association between controlling feeding practices and children's appetite traits. The secondary aim studied the relationship between controlling feeding practices and two proxy indicators of diet quality. Participants were 203 Australian-Indian mothers with children aged 1-5 years. Controlling feeding practices (pressure to eat, restriction, monitoring) and children's appetite traits (. food approach traits: food responsiveness, enjoyment of food, desire to drink, emotional overeating; food avoidance traits: satiety responsiveness, slowness in eating, fussiness and emotional undereating) were measured using self-reported, previously validated scales/questionnaires. Children's daily frequency of consumption of core and non-core foods was estimated using a 49-item list of foods eaten (yes/no) in the previous 24 hours as an indicator of diet quality. Higher pressure to eat was associated with higher scores for satiety responsiveness, slowness in eating, fussiness and lower score for enjoyment of food. Higher restriction was related to higher scores for food responsiveness and emotional overeating. Higher monitoring was inversely associated with fussiness, slowness in eating, food responsiveness and emotional overeating and positively associated with enjoyment of food. Pressure to eat and monitoring were related to lower number of core and non-core foods consumed in the previous 24 hours, respectively. All associations remained significant after adjusting for maternal and child covariates (n = 152 due to missing data). In conclusion, pressure to eat was associated with higher food avoidance traits and lower consumption of core foods. Restrictive feeding practices were associated with higher food approach traits. In contrast, monitoring practices were related to lower food avoidance and food approach traits and lower non-core food consumption.

A model to estimate the durability performance of both normal and light-weight concrete

There has been an increasing focus on the development of test methods to evaluate the durability performance of concrete. This paper contributes to this focus by presenting a study that evaluates the effect of water accessible porosity and oven-dry unit weight on the resistance of both normal and light-weight concrete to chloride-ion penetration. Based on the experimental results and regression analyses, empirical models are established to correlate the total charge passed and the chloride migration coefficient with the basic properties of concrete such as water accessible porosity, oven dry unit weight, and compressive strength. These equations can be broadly applied to both normal and lightweight aggregate concretes. The model was also validated by an independent set of experimental results from two different concrete mixtures. The model provides a very good estimate on the concrete’s durability performance in respect to the resistance to chloride ion penetration.

Temporal trends and bioavailability assessment of heavy metals in the sediments of Deception Bay, Queensland, Australia

Thirteen sites in Deception Bay, Queensland, Australia were sampled three times over a period of 7 months and assessed for contamination by a range of heavy metals, primarily As, Cd, Cr, Cu, Pb and Hg. Fraction analysis, enrichment factors and Principal Components Analysis-Absolute Principal Component Scores (PCA-APCS) analysis were conducted in order to identify the potential bioavailability of these elements of concern and their sources. Hg and Te were identified as the elements of highest enrichment in Deception Bay while marine sediments, shipping and antifouling agents were identified as the sources of the Weak acid Extractable Metals (WE-M), with antifouling agents showing long residence time for mercury contamination. This has significant implications for the future of monitoring and regulation of heavy metal contamination within Deception Bay.

Adsorption and mobility of metals in build-up on road surfaces

The study investigated the adsorption and bioavailability characteristics of traffic generated metals common to urban land uses, in road deposited solids particles. To validate the outcomes derived from the analysis of field samples, adsorption and desorption experiments were undertaken. The analysis of field samples revealed that metals are selectively adsorbed to different charge sites on solids. Zinc, copper, lead and nickel are adsorbed preferentially to oxides of manganese, iron and aluminium. Lead is adsorbed to organic matter through chemisorption. Cadmium and chromium form weak bonding through cation exchange with most of the particle sizes. Adsorption and desorption experiments revealed that at high metal concentrations, chromium, copper and lead form relatively strong bonds with solids particles while zinc is adsorbed through cation exchange with high likelihood of being released back into solution. Outcomes from this study provide specific guidance for the removal of metals from stormwater based on solids removal.

Natural convection due to differential heating of inclined walls and heat source placed on bottom wall of an attic shaped space

Numerical investigation of free convection heat transfer in an attic shaped enclosure with differentially heated two inclined walls and filled with air is performed in this study. The left inclined surface is uniformly heated whereas the right inclined surface is uniformly cooled. There is a heat source placed on the right side of the bottom surface. Rest of the bottom surface is kept as adiabatic. Finite volume based commercial software ANSYS 15 (Fluent) is used to solve the governing equations. Dependency of various flow parameters of fluid flow and heat transfer is analyzed including Rayleigh number, Ra ranging from 103 to 106, heater size from 0.2 to 0.6, heater position from 0.3 to 0.7 and aspect ratio from 0.2 to 1.0 with a fixed Prandtl number of 0.72. Outcomes have been reported in terms of temperature and stream function contours and local Nusselt number for various Ra, heater size, heater position, and aspect ratio. Grid sensitivity analysis is performed and numerically obtained results have been compared with those results available in the literature and found good agreement.

“I would have lost the respect of my friends and family if they knew I had bent the road rules” : parents, peers, and the perilous behaviour of young drivers

Young novice drivers are at considerable risk of injury on the road. Their behaviour appears vulnerable to the social influence of their parents and friends. The nature and mechanisms of parent and peer influence on young novice driver (16–25 years) behaviour was explored via small group interviews (n = 21) and two surveys (n1 = 1170, n2 = 390) to inform more effective young driver countermeasures. Parental and peer influence occurred in preLicence, Learner, and Provisional (intermediate) periods. Pre-Licence and unsupervised Learner drivers reported their parents were less likely to punish risky driving (e.g., speeding). These drivers were more likely to imitate their parents and reported their parents were also risky drivers. Young novice drivers who experienced or expected social punishments from peers, including ‘being told off’ for risky driving, reported less riskiness. Conversely drivers who experienced or expected social rewards such as being ‘cheered on’ by friends – who were also more risky drivers – reported more risky driving including crashes and offences. Interventions enhancing positive influence and curtailing negative influence may improve road safety outcomes not only for young novice drivers, but for all persons who share the road with them. Parent-specific interventions warrant further development and evaluation including: modelling safe driving behaviour by parents; active monitoring of driving during novice licensure; and sharing the family vehicle during the intermediate phase. Peer-targeted interventions including modelling of safe driving behaviour and attitudes; minimisation of social reinforcement and promotion of social sanctions for risky driving also need further development and evaluation.

Domestic violence (DV) service provision and the architecture of rural life: An Australian case study

This article uses the concept of the architecture of rural life to analyse domestic violence service provision in rural Australia. What is distinctive about this architecture is that it polices the privacy of the rural family. A tight cloak of silence is carved around instances of domestic violence. Imagined threats to rural safety are seen as coming from outsiders (i.e. urban influences or Indigenous), not insiders within rural families. This article draws on key findings from a study conducted in rural New South Wales, Australia. The study interviewed 49 rural service providers working in human services and the criminal justice system. The application of architecture of rural life as a conceptual tool demonstrates challenges with service provision in a rural setting. The main results of this study found that this architecture operates as a silencing form of social control in three distinctive ways. Firstly, shame about being a victim of domestic violence encourages rural women's complicity in remaining silent. Secondly, family privacy maintains a veil of silence that accentuates rural women's social and economic dependency on men. Thirdly, community sanctions act as a deterrent to women seeking help.

Health communication: A pilot study comparing perceptions of women with and without high functioning autism spectrum disorder

Research indicates significant health disparities for individuals with autism. Insight into characteristic sensory, cognitive, communication, social, emotional, and behavioural challenges that may influence health communication for patients with autism is vital to address potential disparities. Women with high functioning autism spectrum disorder (ASD) may have specific healthcare needs, and are likely to independently represent themselves and others in healthcare. A pilot study compared perceptions of healthcare experiences for women with and without ASD using on-line survey based on characteristics of ASD likely to influence healthcare. Fifty-eight adult female participants (32 with ASD diagnosis, 26 without ASD diagnosis) were recruited on-line from autism support organisations. Perceptions measured included self-reporting of pain and symptoms, healthcare seeking behaviours, the influence of emotional distress, sensory and social anxiety, maternity experiences, and the influence of autistic status disclosure. Results partially support the hypothesis that ASD women experience greater healthcare challenges. Women with ASD reported greater challenges in healthcare anxiety, communication under emotional distress, anxiety relating to waiting rooms, support during pregnancy, and communication during childbirth. Self-disclosure of diagnostic status and lack of ASD awareness by healthcare providers rated as highly problematic. Results offer detailed insight into healthcare communication and disparities for women with ASD.

A framework for model integration and holistic modelling of socio-technical systems

This paper presents a layered framework for the purposes of integrating different Socio-Technical Systems (STS) models and perspectives into a whole-of-systems model. Holistic modelling plays a critical role in the engineering of STS due to the interplay between social and technical elements within these systems and resulting emergent behaviour. The framework decomposes STS models into components, where each component is either a static object, dynamic object or behavioural object. Based on existing literature, a classification of the different elements that make up STS, whether it be a social, technical or a natural environment element, is developed; each object can in turn be classified according to the STS elements it represents. Using the proposed framework, it is possible to systematically decompose models to an extent such that points of interface can be identified and the contextual factors required in transforming the component of one model to interface into another is obtained. Using an airport inbound passenger facilitation process as a case study socio-technical system, three different models are analysed: a Business Process Modelling Notation (BPMN) model, Hybrid Queue-based Bayesian Network (HQBN) model and an Agent Based Model (ABM). It is found that the framework enables the modeller to identify non-trivial interface points such as between the spatial interactions of an ABM and the causal reasoning of a HQBN, and between the process activity representation of a BPMN and simulated behavioural performance in a HQBN. Such a framework is a necessary enabler in order to integrate different modelling approaches in understanding and managing STS.