Estudio diacrónico comparativo de los usos y la semántica de la preposición DE en dos novelas españolas: Libro del caballero Zifar y El ingenioso hidalgo don Quijote de la Mancha

Prepositioner är välkända för sin polysemi eller betydelsemångfald, och utgångspunkten för den här uppsatsen har varit ett intresse av att undersöka om det är möjligt att för en av de mest mångtydiga spanska prepositionerna, DE, finna en sammanhängande semantisk struktur, eller om det är nödvändigt att se de olika betydelserna som inbördes orelaterade. För att utreda den här frågan och ge den ett diakroniskt perspektiv undersöker jag i den här uppsatsen användningen av den spanska prepositionen DE i två romaner ur den spanska litteraturhistorien, Libro del caballero Zifar och El ingenioso hidalgo don Quijote de la Mancha, del I. Uppsatsen består av tre delar. I kapitel två ger jag en teoretisk översikt över spanskans prepositionssystem och prepositionerna beskrivs både ur syntaktisk och semantisk synvinkel. Dessutom presenteras den kognitiva grammatiken och dess synsätt på prepositioner. Huvuddelen av arbetet koncentrerar sig på att presentera prepositionen DE på två sätt och enligt två skilda metoder. I kapitel tre presenteras de olika kontextuella användningarna av DE enligt den traditionella, historisk-komparativa metoden. Med utgångspunkt i dessa kontextuella användningar ställer jag i kapitel fyra med stöd av den kognitiva grammatikens begreppssystem upp en semantisk nätverksmodell av de olika betydelser som jag fastställt för DE i den funktionella analysen. För den semantiska beskrivningen har jag använt mig av den kognitiva grammatiken, eftersom denna grammatikuppfattning i motsats till den traditionella grammatiken ser polysemin som regel och utgångspunkt i den semantiska strukturen. Analysdelen av uppsatsen inleds med den funktionella presentationen av användningarna av DE av två grundläggande skäl: För det första anser jag det ändamålsenligt att för den semantiska beskrivningen ha en solid bas av exempel där användningen av DE analyserats med hänsyn till kontexten. Kapitel tre är därför indelat i fyra huvuddelar, enligt vilken ordklass DEs huvudord tillhör, t.ex.: substantiv, adjektiv, verb. I exemplen i den fjärde gruppen fungerar prepositionsfrasen som inleds av DE som en mer fristående bestämning på frasnivå, där huvudordets ordklasstillhörighet inte är av avgörande betydelse. För det andra utgår jag från att en viss utveckling av DE har skett under de 300 år som tidsmässigt skiljer de båda romanerna åt, både vad gäller dess användning och dess semantik. För att komma underfund med och beskriva utsträckningen hos denna utveckling är det nödvändigt att den komparativa delen presenteras innan den semantiska beskrivningen kan inledas. Resultaten av den komparativa analysen är att ett antal smärre skillnader i användningen förekommer, men detta till trots har ingen betydande semantisk utveckling kunnat iakttas. Detta innebär att den semantiska beskrivningen av DE kan göras utifrån ett relativt enhetligt material. Jag har följaktligen också kunnat ställa upp en enhetlig semantisk nätverksmodell av tolv olika, relaterade betydelser hos DE. Utgående från mitt material är det sålunda möjligt att se DEs polysemi som ett sammanhängande nätverk, trots att vissa av betydelserna kan verka sinsemellan motstridiga och att 300 år skiljer åt de två böckerna. Nyckelord: prepositioner, DE: semantik och användning, polysemi, kognitiv grammatik, diakroni

Low-density koala (Phascolarctos cinereus) populations in the mulgalands of south-west Queensland. II. Distribution and diet

This study used faecal pellets to investigate the broadscale distribution and diet of koalas in the mulgalands biogeographic region of south-west Queensland. Koala distribution was determined by conducting faecal pellet searches within a 30-cm radius of the base of eucalypts on 149 belt transects, located using a multi-scaled stratified sampling design. Cuticular analysis of pellets collected ffom 22 of these sites was conducted to identify the dietary composition of koalas within the region. Our data suggest that koala distribution is concentrated in the northern and more easterly regions of the study area, and appears to be strongly linked with annual rainfall. Over 50% of our koala records were obtained from non-riverine communities, indicating that koalas in the study area are not primarily restricted to riverine communities, as bas frequently been suggested. Cuticular analysis indicates that more than 90% of koala diet within the region consists of five eucalypt species. Our data highlights the importance of residual Tertiary landforms to koala conservation in the region.

Modeling of dynamic material behavior in hot deformation: Forging of Ti-6242

A new method of modeling material behavior which accounts for the dynamic metallurgical processes occurring during hot deformation is presented. The approach in this method is to consider the workpiece as a dissipator of power in the total processing system and to evaluate the dissipated power co-contentJ = ∫o σ ε ⋅dσ from the constitutive equation relating the strain rate (ε) to the flow stress (σ). The optimum processing conditions of temperature and strain rate are those corresponding to the maximum or peak inJ. It is shown thatJ is related to the strain-rate sensitivity (m) of the material and reaches a maximum value(J max) whenm = 1. The efficiency of the power dissipation(J/J max) through metallurgical processes is shown to be an index of the dynamic behavior of the material and is useful in obtaining a unique combination of temperature and strain rate for processing and also in delineating the regions of internal fracture. In this method of modeling, noa priori knowledge or evaluation of the atomistic mechanisms is required, and the method is effective even when more than one dissipation process occurs, which is particularly advantageous in the hot processing of commercial alloys having complex microstructures. This method has been applied to modeling of the behavior of Ti-6242 during hot forging. The behavior of α+ β andβ preform microstructures has been exam-ined, and the results show that the optimum condition for hot forging of these preforms is obtained at 927 °C (1200 K) and a strain rate of 1CT•3 s•1. Variations in the efficiency of dissipation with temperature and strain rate are correlated with the dynamic microstructural changes occurring in the material.

Digital color reproduction on color television monitors

Color displays used in image processing systems consist of a refresh memory buffer storing digital image data which are converted into analog signals to display an image by driving the primary color channels (red, green, and blue) of a color television monitor. The color cathode ray tube (CRT) of the monitor is unable to reproduce colors exactly due to phosphor limitations, exponential luminance response of the tube to the applied signal, and limitations imposed by the digital-to-analog conversion. In this paper we describe some computer simulation studies (using the U*V*W* color space) carried out to measure these reproduction errors. Further, a procedure to correct for color reproduction error due to the exponential luminance response (gamma) of the picture tube is proposed, using a video-lookup-table and a higher resolution digital-to-analog converter. It is found, on the basis of computer simulation studies, that the proposed gamma correction scheme is effective and robust with respect to variations in the assumed value of the gamma.

Vapaata mielenjuoksua : Suomenkielisen freestyle-rapin ilmenemismuodot, estetiikka ja kompositio

The thesis is about Finnish freestyle-rap, a modern form of oral poetry producing improvised rap lyrics at the moment of performance. The research material consists of interviews with seven freestyle experts and a DVD from Finnish Rap Championships 2005 containing freestyle-rap. The thesis has three goals: describing the different variations or subgenres of freestyle, outlining the esthetics and register of freestyle, and examining the composition of freestyle. The research material acts a central role in the thesis but the theoretical framework is also wide: cornerstones are John Miles Foley's register analysis, oral formulaic theory and William Levelt's psycholinguistic theory on planning of speech. Freestyle is divided into three partially overlapping genres with slight variation in conventions. The genres are freestyle battle, cypher, and live freestyle. Freestyle's esthetics are composed of certain qualities and preferences: the rhyme is a syllabically repeating vocal rhyme. The rapping must be synchronised with the background rhythm and the rhyme comes in the end of the line. The lyrics must be somehow anchored to the surroundings and the moment of performance. The style of rapping, ie. flow, has to be personal one way or the other. Individual formulas are used to some extent in freestyle compostition. When planning the lines, all other content is subordinate to the rhyme, whose phonetic processing is the primary act in the planning of freestyle. This discovery sets Levelt's theory open to doubt.

J. L. Runebergs samlade skrifter i textkritisk belysning

The Collected Works of J. L. Runeberg from the Viewpoint of Textual Scholarship The theoretical framework of this dissertation builds on textual scholarship. The dissertation explores the history of Runeberg’s publications and his relations with his publishers, from his debut and the first editions, through the editions of collected works published during the course of his life, to the later commercial editions, including the critical edition, published in 1933–2005 by the Svenska Vitterhetssamfundet (The Swedish Society for Belles Lettres) and The Svenska litteratursällskapet i Finland (The Society of Swedish Literature in Finland). The various editions of Runeberg’s collected works are situated in their respective critical traditions, from the 19th century German Ausgabe letzter Hand, to the influence of Anglo-American bibliography on Swedish textual criticism in the late 20th century. By making use of primary material previously not used for research purposes, the author is able to present a new view on Runebergian publishing history, including Runeberg’s fees and his relations with the censor authorities. There are indications that his Finnish publishers could not bear the cost of his sizable fees, that were in proportion neither with the book market in Finland nor with the numbers of copies sold. Apart from a certain body of editions the primary material is comprised of correspondences, publishing contracts, printing house invoices, as well as censor authority records. One of the conclusions drawn is that the early and detailed biography, Biografiska anteckningar om Johan Ludvig Runeberg (Biographical Notes on …) by J. E. Strömborg is not reliable in matters concerning publishing history, and that this work has been used far too uncritically. The history of the critical edition gets a chapter of its own, based on primary material in Swedish and Finnish archives. Finally, the author analyses the critical choices, made primarily in the critical edition, and uses examples from the commercial editions to study the editors’ interventions over time, from the 1850s to the 1920s. The changes to the text are usually small and subtle, but cumulative – and in some cases, crucial for the interpretation of the work. One objective of textual scholarship should be to examine the publishing history of a single work or of an author’s œuvre, and another to pay attention both to changes in a work as such and to the shifts of meaning they might entail.

A Novel Operator-Splitting Technique for One-Dimensional Laminar Premixed Flames

This paper is concerned the calculation of flame structure of one-dimensional laminar premixed flames using the technique of operator-splitting. The technique utilizes an explicit method of solution with one step Euler for chemistry and a novel probabilistic scheme for diffusion. The relationship between diffusion phenomenon and Gauss-Markoff process is exploited to obtain an unconditionally stable explicit difference scheme for diffusion. The method has been applied to (a) a model problem, (b) hydrazine decomposition, (c) a hydrogen-oxygen system with 28 reactions with constant Dρ 2 approximation, and (d) a hydrogen-oxygen system (28 reactions) with trace diffusion approximation. Certain interesting aspects of behaviour of the solution with non-unity Lewis number are brought out in the case of hydrazine flame. The results of computation in the most complex case are shown to compare very favourably with those of Warnatz, both in terms of accuracy of results as well as computational time, thus showing that explicit methods can be effective in flame computations. Also computations using the Gear-Hindmarsh for chemistry and the present approach for diffusion have been carried out and comparison of the two methods is presented.

Line narrowing of electromagnetically induced transparency in Rb with a longitudinal magnetic field

Electromagnetically induced transparency (EIT) experiments in Lambda-type systems benefit from the use of hot vapor where the thermal averaging results in reducing the width of the EIT resonance well below the natural linewidth. Here, we demonstrate a technique for further reducing the EIT width in room-temperature vapor by the application of a small longitudinal magnetic field. The Zeeman shift of the energy levels results in the formation of several shifted subsystems; the net effect is to create multiple EIT dips each of which is significantly narrower than the original resonance. We observe a reduction by a factor of 3 in the D2 line of 87Rb with a field of 3.2 G.

An investigation of structural, magnetic and dielectric properties of R2NiMnO6 (R = rare earth, Y)

We have investigated the structure, magnetic and dielectric properties of the double perovskite oxides, R2NiMnO6 (R = Pr, Nd, Sm, Gd, Tb, Dy, Ho and Y). We could refine powder X-ray diffraction patterns of all the phases on the basis of monoclinic (P2(1)/n) double perovskite structure where Ni and Mn atoms are ordered at 2c and 2d sites, respectively. All the phases are ferromagnetic insulators exhibiting relatively low dielectric loss and dielectric constants in the range 15-25. The ferromagnetic ordering temperature of the R2NiMnO6 series seems to correlate better with the radius of R3+ atoms than with the average Ni-O-Mn angle (phi) in the double perovskite structure. These results are consistent with all samples having Mn4+ and Ni2+ With minimal antisite disorder.

Hydrothermal phase equilibria in Ln2O3-H2O-CO2 systems : I. The lighter lanthanides

Phase diagrams for Nd2O3-H2O-CO2 and Gd2O3-H2O-CO2 systems at 1500 atm are given along with the results of selected runs in La, Sm and Eu systems. The stable phases in systems of La and Nd, are Ln(OH)CO3-B, Ln2O2CO3-II and LnOOH, in addition to the Ln(OH)3 phase at extremely low partial pressures of CO2 in the system. The systems become more and more complex with decreasing ionic radi and the number of stable carbonate phases increases. Ln2(CO3)3 · 3H2O orthorhombic (tengerate-like phase) is stable from Sm to Gd in addition to the other phases. The Gd(OH)CO3-A (ancylite-like phase) is hydrothermally stable at XCO2 greater-or-equal, slanted 0.5 while its hexagonal polymorph, Gd(OH)CO3-B is stable at low partial pressures of CO2 in the system.

Structure of 2-(2,6-dimethoxyphenyl)-2,5- dimethylbicyclo[3.2.1]octane-6,8-dione

C18H2204, orthorhombic, P212~21, a = 7.343 (4), b = 11.251 (4), c = 19.357 (4)A, Z = 4, Dr, ' = 1.20, D e = 1.254 g cm -3, F(000) = 648, p(MoKa) = 0.94 cm -~. X-ray intensity data were collected on a Nonius CAD-4 diffractometer and the structure was solved by direct methods. Full-matrix least-squares refinement gave R = 0.052 (R w = 0.045) for 1053 observed reflections. The stereochemical configuration at C(2) has been shown to be 2-exo-methyl-2-endo-(2,6-dimethoxyphenyl), i.e. (3) in contrast to the structure (2) assigned earlier based on its ~H NMR data.

Deformation processing of an aluminum alloy containing particles: Studies on AI-5 pct Si alloy 4043

Al-5 wt pct Si alloy is processed by upset forging in the temperature range 300 K to 800 K and in the strain rate range 0.02 to 200 s−1. The hardness and tensile properties of the product have been studied. A “safe” window in the strain rate-temperature field has been identified for processing of this alloy to obtain maximum tensile ductility in the product. For the above strain rate range, the temperature range of processing is 550 K to 700 K for obtaining high ductility in the product. On the basis of microstructure and the ductility of the product, the temperature-strain rate regimes of damage due to cavity formation at particles and wedge cracking have been isolated for this alloy. The tensile fracture features recorded on the product specimens are in conformity with the above damage mechanisms. A high temperature treatment above ≈600 K followed by fairly fast cooling gives solid solution strengthening in the alloy at room temperature.

Performance of graphic aluminium particulate composite materials

Friction characteristics of journal bearings made from cast graphic aluminum particulate composite alloy were determined under mixed lubrication and compared with those of the base alloy (without graphite) and leaded phosphor bronze. All three materials ran without seizure while the performance of the particulate composite and leaded phosphor bronze improved with running. Temperature rise in the journal bearing under mixed/boundary lubrication was also measured. It was found that with 0.3D/1000 to 1.5D/1000 clearance and a low lubrication rate (typical value for a bearing of diameter 35 mm × length 35 mm is 80 mm3/min) and at a PV value of 73 × 106 Nm m−2 min−1 graphitic aluminium alloy journal bearings operate satisfactorily without seizure and excessive temperature rise. In comparison, the bronze bearings, with all the other parameters remaining the same, could not run without excessive temperature rise at clearances below D/1000 at lubrication rates lower than 200 mm3/min

Gibbs energies of formation of rare earth oxysulfides

The standard Gibbs energy change accompanying the conversion of rare earth oxides to oxysulfides by reaction of rare earth oxides with diatomic sulfur gas has been measured in the temperature range 870 to 1300 K using the solid state cell: Pt/Cu+Cu2S/R2O2S+R2O3‖(CaO)ZrO2‖Ni+NiO, Pt where R=La, Nd, Sm, Gd, Tb, and Dy. The partial pressure of diatomic sulfur over a mixture of rare earth oxide (R2O3) and oxysulfide (R2O2S) is fixed by the dissociation of Cu2S to Cu in a closed system. The buffer mixture of Cu+Cu2S is physically separated from the rare earth oxide and oxysulfide to avoid complications arising from interaction between them. The corresponding equilibrium oxygen partial pressure is measured with an oxide solid electrolyte cell. Gibbs energy change for the conversion of oxide to the corresponding oxysulfide increases monotonically with atomic number of the rare earth element. Second law enthalpy of formation also shows a similar trend. Based on this empirical trend Gibbs energies of formation of oxysulfides of Pr, Eu, Ho, and Er are estimated as a function of temperature.

Growth and carcass characteristics of cast-for-age Merino ewes fed sorghum-based feedlot diets

Grain feeding low bodyweight, cast-for-age (CFA) sheep from pastoral areas of eastern Australia at the end of the growing season can enable critical carcass weight grades to be achieved and thus yield better economic returns. The aim of this work was to compare growth and carcass characteristics for CFA Merino ewes consuming either simple diets based on whole sorghum grain or commercial feed pellets. The experiment also compared various sources of additional nitrogen (N) for inclusion in sorghum diets and evaluated several introductory regimes. Seventeen ewes were killed initially to provide baseline carcass data and the remaining 301 ewes were gradually introduced to the concentrate diets over 14 days before being fed concentrates and wheaten hay ad libitum for 33 or 68 days. Concentrate treatments were: (i) commercial feed pellets, (ii) sorghum mix (SM; whole sorghum grain, limestone, salt and molasses) + urea and ammonium sulfate (SMU), (iii) SMU + whole cottonseed at 286 g/kg of concentrate dry matter (DM), (iv) SM + cottonseed meal at 139 g/kg of concentrate DM, (v) SMU + virginiamycin (20 mg/kg of concentrate) for the first 21 days of feeding, and (vi) whole cottonseed gradually replaced by SMU over the first 14 days of feeding. The target carcass weight of 18 kg was achieved after only 33 days on feed for the pellets and the SM + cottonseed meal diet. All other whole grain sorghum diets required between 33 and 68 days on feed to achieve the target carcass weight. Concentrates based on whole sorghum grain generally produced significantly (P < 0.05) lower carcass weight and fat score than pellets and this may have been linked to the significantly (P < 0.05) higher faecal starch concentrations for ewes consuming sorghum-based diets (270 v. 72 g/kg DM on day 51 of feeding for sorghum-based diets and pellets, respectively). Source of N in whole grain sorghum rations and special introductory regimes had no significant (P > 0.05) effects on carcass weight or fat score of ewes with the exception of carcass weight for SMU + whole cottonseed being significantly lower than SM + cottonseed meal at day 33. Ewes finished on all diets produced acceptable carcasses although muscle pH was high in all ewe carcasses (average 5.8 and 5.7 at 33 and 68 days, respectively). There were no significant (P > 0.05) differences between diets in concentrate DM intake, rumen fluid pH, meat colour score, fat colour score, eye muscle area, meat pH or meat temperature.