Geração de energia elétrica a partir da concentração solar

The current world's need for clean and renewable energy sources aligned with the strong Brazilian growth looking to diversify its electric power generation sources, highly dependent on hydropower and petroleum encourages the implementation of technologies that reach this growth with diversity and cleaning. The sun energy source is considered inexhaustible and can meet the demand for energy through thermo solar plants to generate electricity. Several technologies are being studied and developed in the world and they can be used to generate electricity from the solar concentration, but in Brazil its use is still not found commercially. It is therefore essential to understand these technologies and develop knowledge about them so they can be implemented in Brazil. This work brings an overview of the thermo solar generation in Brazil, showing the different technologies and a thermodynamic simulation of one of such technologies considering a hybrid plant with complementary generation biomass, aiming at the generation of 1 MW in the Brazilian Northeast

Automatização de testes funcionais utilizando a ferramenta Sikuli

This work seeks to demonstrate the advantages in functional software test automation using Sikuli tool, which uses image recognition to find the graphical elements of a system, in addition to using a custom library with methods made to automate the summarization of obtained results through the tests and their evidence

Relação entre a disparidade de força entre membros inferiores e estabilidade postural em atletas de voleibol

Volleyball is a sport in which the laterality dominant limb shows superior strength and coordination because of its preferential use. Asymmetrical tendencies during the landing after the jump when striking or blocking actions are predominant for most part of game (ARRUDA; EDUARDO, 2008). Adaptations include imbalance of forces in static and dynamic motions at the knee joint, which increases risk for injury. Also, asymmetries in balance control during jumping and landing associate with a general postural instability that can be observed during static balance tasks. The purpose of this study was to investigate relationship between unequal lower limb strength (muscle imbalance) and postural stability levels in volleyball athletes and non-athletes. Nine female volleyball athletes and 10 active non-athletes participated in this study. Four encouters with participants were scheduled: three encounters in the bodybuilding gymnasium to collect anthropometric measures (weight, height for BMI, thigh circumference, which provided an initial diagnosis about asymmetry), and to perform the isometric strength test (i.e., leg press using a load cell and a force transducer to calculate uni an bilateral strength). The last encounter was in the laboratory where a balance test on a force platform was administered under five test conditions, with three repetitions each: baseline (natural standing position), one-leg standing, right side, with full vision (D_CV), and blindfolded (D_SV), one-leg standing, left side, with full vision (E_CV), and blindfolded (E_SV). The stability levels were evaluated using the path length parameters which was based on the total displacement of the center of pressure (DTCP). . Both groups shows asymmetric strength levels between legs, with better performance for the right leg. An ANOVA three way using the DTCP for the CV condition, legs (D x E), trials (3) with repeated measures for the first two factors and with a between (three)...

Física de partículas no ensino médio: uma análise de materiais para apoio didático

This work consisted in analysing five materials which mean respect to subjects related to Particle Physics, aiming to explore their potentialities for the use in the High School levels, particularly by physics teachers. On this perspective, we sought to describe the contents of each material and point out their potentialities as material of didactic support. They are: 1. The purpose of Secretaria da Educação do Estado de São Paulo, presented in the Teacher's Guide of the Program São Paulo faz escola; 2. The Game Sprace Game, elaborated by the European Organization for Nuclear Research (CERN); 3. The book O discreto charme das partículas elementares, written by the professor Maria Cristina Abdalla; 4. The video O discreto charme das partículas elementares, based on the book of Professor Maria Cristina Abdalla which was produced by TV Cultura in association with the Ministério da Educação e Cultura” (MEC). The book Partículas elementares no ensino médio: uma abordagem a partir do LHC written by Wagner Franklin Balthazar and Alexandre Lopes de Oliveira, from the collection CBPF - Tópicos de Física. The work was constructed on a qualitative perspective, that is, it did not attempt to quantify the help that each material could offer to Physics teaching. One sought to describe and analyse, from different theoretical frames, their potentialities for the use in the High School level. The results indicate that all the materials analysed can contribute to the Physics teaching, and beyond, as they own format and approches distinct from the subject, they can be used as a whole or in parts, together or separately, depending on the objectives to be reached and on the profile of the target public

Proposta de arquitetura e protocolo para a geração automática de assinaturas de malwares

Given the exponential growth in the spread of the virus world wide web (Internet) and its increasing complexity, it is necessary to adopt more complex systems for the extraction of malware finger-prints (malware fingerprints - malicious software; is the name given to extracting unique information leading to identification of the virus, equivalent to humans, the fingerprint). The architecture and protocol proposed here aim to achieve more efficient fingerprints, using techniques that make a single fingerprint enough to compromise an entire group of viruses. This efficiency is given by the use of a hybrid approach of extracting fingerprints, taking into account the analysis of the code and the behavior of the sample, so called viruses. The main targets of this proposed system are Polymorphics and Metamorphics Malwares, given the difficulty in creating fingerprints that identify an entire family from these viruses. This difficulty is created by the use of techniques that have as their main objective compromise analysis by experts. The parameters chosen for the behavioral analysis are: File System; Records Windows; RAM Dump and API calls. As for the analysis of the code, the objective is to create, in binary virus, divisions in blocks, where it is possible to extract hashes. This technique considers the instruction there and its neighborhood, characterized as being accurate. In short, with this information is intended to predict and draw a profile of action of the virus and then create a fingerprint based on the degree of kinship between them (threshold), whose goal is to increase the ability to detect viruses that do not make part of the same family

Desenvolvimento de aplicativo de análise técnica e econômica para adaptação de uma roda d’água acionada por cima para geração de energia elétrica no meio rural

The steel type AISI 4130 (ultra-high strength steel) is an alloy of low carbon and its main alloying elements are chromium and molybdenum, which improves the toughness of the weld metal. It has numerous applications, especially where the need for high mechanical strength. It is widely used in equipment used by the aviation industry, such as cradle-tomotor, and this is the motivation for this study. Cots are of fundamental importance, because the engine supports and maintains balance in the fixed landing gear. This equipment is subjected to intense loading cycles, whose fractures caused by fatigue are constantly observed. Will be determined the effects caused by re-welding the structure of aeronautical equipment, and will also study the microstructure of the metal without welding. The studies will be done on materials used in aircraft, which was given to study. The results provide knowledge of microstructure to evaluate any type of fracture that maybe caused by fatigue. Fatigue is a major cause of aircraft accidents and incidents occurred, which makes the study of the microstructure of the metal, weld and re-solder the knowledge essential to the life of the material. The prevention and control of the process of fatigue in aircraft are critical, since the components are subjected to greater responsibility cyclic loading

Educação e trabalho: as políticas públicas e as articulações das ações de qualificação e geração de emprego para a juventude

This paper analyzes the transformations in Brazilian society, especially in relations between the fields of work, education and youth. The implementation of a new logic in the process of capital accumulation, changes meant to hit the job market, causing new social issues, especially for youth, which can be translated by rising unemployment and new job settings, thus, have sparked a broad debate around the requirements that the market imposes on that intend to engage in it, relations skills, knowledge and ability to enter the labor market of the population, reissuing the discussion on social inequalities that required the field of alternative public policies to address this situation of exclusion. Turning to the reflection on the process of qualification / training and placing young people in employment relationships, this study aims to address and reflect on educational policies aimed at the inclusion ofyouth in the labor market, as well as analyze the actions of generating jobs and skills for young people between 18 and 29 years to do so, we will examine the National Youth Inclusion Program- PROJOVEM - sponsored by the Federal Governrnent, which aims to expand the service to the youngsters excluded from school and vocational training, allowing young people to be reintegrated into the educational process, receiving social skills training

Desempenho em tarefas computacionais em função do uso de diferentes periféricos

With the popularization of information technology and government incentives for inclusion in the digital era, an important issue for science and for industry is the design of tool s for entrance of input to the device, that is , the peripherals at tached to the computer that are reaching the consumer. In order to minimize the impact of repetitive use of these tools for entry, whether when playing games or working, more studies are in need to developper ipherals that enable comfort and effi ciency. This study examined the per formance of individuals with differents izes of hand (i.e., large and small ) in performance of three task s on the computer us ing mouses of small and large sizes. For thi s study, 19 young adul ts were volunteers and asked to per form activities with greater precision and speed. In addition, al l participants were asked on the use of computers. The results showed no statistically significant differences in the performance related to the size of the mouse between subjects with small and large hands. However, an interest ingresult as observed with respect to the performance of individuals with a large hand to perform tas ks more quickly. The results of this study suggest that with both, the small and the large mouse, individuals with big hands have a fas terper formancein tasks of dragging and clicking when compared with the performance of indi viduals with small hand.

Apoio à gerência de requisitos de software utilizando Design Rationale

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Biblioteca de escalonamento de tarefas em grid computacional - LIBTS

The use of computational grid simulators is particularly important for studying the algorithms of task scheduling. Through the simulators it’s possible to assess and compare the performance of different algorithms in various scenarios. Despite the simulation tools provide basic features for simulation in distributed environments, they don’t offer internal policies of task scheduling, so that the implementation of the algorithms must be realized by the user himself. Therefore, this study aims to present the library of task scheduling LIBTS (LIBrary Tasks Scheduling) which is developed and adapted to the SimGrid simulator to provide the users with a tool to analyze the algorithms of task scheduling in the computational grid.

Projeto e implantação de pequena central de geração hidrelétrica: análise de caso

The objective of this work is to study the implantation feasibility of a small hydropower system in a rural area in Guaratinguetá. Due to its location and accessibility, and the costs involved in extending the public distribution line to the property it could turn become viable the construction of an individual electric generation system. As alternatives, a solar photovoltaic system and combustion engine-electric generator systems were considered. However, the existence of a small river inside the property, the construction of a micro hydropower plant was taken into account. The choice of the micro power hydropower plant was determined by the owner and was based on the costs. The topographic and hydrological profiles as well as the geometrical characteristics of the system, including the civil infrastructure needed and the more adequate turbine, were determined. Finally, the cost spreadsheet was set and the results were compared with those calculated for the extension of the available public distribution system

Aplicação do conceito de geração distribuída a um sistema fotovoltaico residencial

This work presents a study about distributed generation using photovoltaic systems in the context of smart grids. The characteristics of a Smart Grid and the several aspects this concept involves - distributed generation among them - are discussed. There are also examples of equipment, like smart meters, and of national and international projects. The specificities of distributed generation and the rules and standards necessary in this sort of installation are talked through with focus in the solar energy generation method. Regarding photovoltaic systems, the working principles of the panels are presented, along with its main electrical characteristics and the technologies available. Finally there is a study concerning the sizing of a distributed generation system that involves photovoltaic panels in a residential plant. An analysis of the costs and return of investment period is made about the specific case in consideration.

Inclusão no ensino superior: das políticas públicas aos programas de atendimento e apoio às pessoas com necessidades educacionais especiais

Pós-graduação em Educação - FFC

O modelo pedagógico das competências: gênese e apropriação na reforma da década de 1990

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)