A new species and expanded distributions of freshwater Audouinella (Acrochaetiaceae, Rhodophyta) from Central Mexico and south-eastern Brazil

Eighteen collections of red-coloured Audouinella from Central Mexico and southeastern Brazil detected three species. The most common species, A. eugenea, is characterized by macroscopic thalli, the erect system consisting of filaments with cylindrical cells, undifferentiated into proximal and distal parts, and relatively large monosporangia (greater than or equal to 12.0 mum long). Spermatangia. and possible propagules were observed in some Mexican populations. This is the third Audouinella species observed to have gametangia and the first member of the Acrochaetiales with putative propagules. The second species, from Central Mexico, was characterized by the following features: macroscopic thalli, the erect system differentiated into proximal parts with cylindrical cells, unbranched or rarely branched, and distal parts with barrel-shaped cells, abundantly branched to form dense fascicles, with alternate or dichotomous branching, some at right-angles to the axis, and relatively large monosporangia (greater than or equal to 12.0 mum long). The morphologically distinct proximal and distal portions of the erect system, the latter forming dense fascicles, was a consistent character so far unknown in Audouinella; thus, we propose a new species, A. huastecana sp. nov. The third species is a microscopic epiphyte, A. meiospora, with a well-developed prostrate system composed of creeping and loosely aggregated filaments, and a short homogeneous erect system (less than or equal to 15 cells) of filaments with cylindrical or barrel-shaped cells and small monosporangia (less than or equal to 13.0 mum long). A. eugenea and A. meiospora are characterized for the first time from the Southern and Northern Hemispheres, respectively, both occurring mostly in areas of tropical or subtropical rainforests. A. meiospora is reported from new macroalgal hosts. A. eugenea and A. huastecana tended to occur in warm, alkaline waters with a high ion content that were moderate to fast flowing, whereas A. meiospora was not associated with particular habitats.

Sex determination studies in two species of teleost fish, Oreochromis niloticus and Leporinus elongatus

Genetic analyses of sex determination have identified sex chromosomes in many teleost fish species. However, there are several cases for which sex ratios do not fit perfectly with the expectations of heterogametic systems, suggesting the influence of either minor sex determining genes or environmental influences on the process of sex differentiation. The frequent absence of sex chromosome markers makes the identification of minor sex-determining genes very difficult. It is easier to test first the hypothesis of environmental sex determination (ESD) by studying the temperature effect, since temperature-dependent sex determination has been demonstrated to occur in several vertebrate groups including 1 fish species. To contribute to a better understanding of fish sex determination, we have tested the effects of high temperatures on sex ratios of Oreochromis niloticus, and have attempted to isolate sex chromosome molecular markers in Leporinus elongatus. Treatments of O. niloticus fry at 36 degrees C applied for 10 days and more, and starting 1 week after fertilization markedly increased the proportion of males, and progeny-testing these males confirmed that some of them are sex-reversed genetic females. Two non-coding sequences of L. elongatus Z and W chromosomes were cloned by genomic subtraction. They cross-hybridized with the genome of a close species without providing sex-specific patterns. A collection of L. elongates individuals was subjected to gonadal and chromosomal sexing, and DNA hybridization with both sequences. These analyses revealed 3 individuals having atypical W chromosomes. Interestingly, 2 of these were males having a ZW karyotype. We assume that these atypical sex chromosome arise by exchanges between Z and W chromosomes, and that a transition between female and male heterogamety is underway in this species.

Proprioceptive and behavior impairments in individuals with anterior cruciate ligament reconstructed knees

Objective: To assess sensory deficits and their effects on proprioceptive and motor function in patients who had undergone unilateral anterior cruciate ligament (ACL) reconstruction.Design: Four evaluations were conducted: (1) joint position perception of the knee for predetermined angles (0degrees, 15degrees, 30degrees, 45degrees, 60degrees); (2) threshold for detection of passive knee motion at 0degrees, 15degrees, 30degrees, 45degrees, and 60degrees moving into flexion and at 15degrees, 30degrees, 45degrees, and 60degrees moving into extension; (3) latency onset of hamstring muscles; and (4) postural control during upright double- and single-leg stance.Setting: Movement laboratory in Brazil.Participants: Ten participants who had surgical reconstruction of the ACL (reconstructed group) and 10 participants without knee injury (control group).Interventions: Not applicable.Main Outcome Measures: Absolute error, angular displacement, hamstring muscles latency, and mean sway amplitude.Results: Individuals with a reconstructed knee showed decreased joint position perception, a higher threshold for detection of passive knee motion, longer latency of hamstring muscles, and decreased performance in postural control.Conclusions: After lesion and ACL reconstruction, sensory and motor behavior changes were still observed. This may be because of the lack of proprioceptive information resulting from the ACL lesion and/or substitution of ACL by the graft. (C) 2003 by the American Congress of Rehabilitation Medicine and the American Academy of Physical Medicine and Rehabilitation.

SOME CONSEQUENCES IN WEAK PROCESSES OF 3-GENERATION MIXING IN THE LEPTONIC SECTOR

We investigate the sensitivity of some weak processes to a Cabibbo-Kobayashi-Maskawa in the leptonic sector. Values for mixing angles and masses compatible with several experimental accelerator data were found. We discuss in this context neutrino oscillations and cosmological and astrophysical consequences as well.

Effect of handpiece tip design on the cutting efficiency of an air abrasion system

Purpose : the aim of this study was to evaluate the effect of nozzle angle and tip diameter on the cutting efficiency of an air abrasion system. Materials and Methods: Thirty-six extracted human third molars were air-abraded with the PrepStar microabrasion machine using a handpiece with either 80degrees or 45degrees nozzle angles with 0.38 or 0.48 nun tip orifice diameters. The following parameters were held constant: abrasive particle size (27 mum), air pressure (80 psi), distance (2 mm.) and duration (15 seconds). The cutting efficiency was compared using enamel, dentin and cementum substrates. Width and depth of the cutting patterns were analyzed and measured using scanning electron micrographs. Results: Statistical analysis using three-way ANOVA and Duncan's Multiple Range test revealed that the width of the cuts was significantly greater when the cavities were prepared using the 45degrees nozzle angle. Significantly deeper cavities were produced with the 80degrees nozzle angle. The tip orifice of the nozzle influenced the cutting efficiency in softer substrates, dentin and cementum. Precise removal of hard tissue is best accomplished using the 80degrees angle nozzle tips for all types of tooth surfaces, enamel, dentin and cementum.

Audouinella macrospora (Acrochaetiaceae, Rhodophyta) is the Chantransia stage of Batrachospermum (Batrachospermaceae)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

AN ISOCOUMARIN DERIVATIVE FROM PAEPALANTHUS BROMELIOIDES

The structure of 5,7,9,10-tetramethoxy-3-methyl-1 H-naphtho[2,3-c]pyran-1-one, C18H18O6, a derivative of a natural isocoumarin isolated from Paepalanthus bromelioides, was determined by X-ray analysis, which unequivocally confirmed the previously assigned structure. Small deviations from the standard angles, resulting from steric hindrance between the methoxyl and carbonyl groups, were observed.

Experimental and theoretical study of the compound [Pd(dmba)(NCO)(imz)]

The compound [Pd(dmba)(NCO)(imz)] (dmba = N,N-dimethylbenzilamine; NCO = cyanate; imz = imidazole) was studied through experimental and theoretical methods. The complex was synthesized and characterized by IR and NMR spectroscopy. To an appropriate representation of the molecular environment, Gaussian basis sets for the constituent atoms of the compound were built and, after adequate supplementation with polarization and diffuse functions, they were used to study the molecule. Calculations of electronic and vibrational structure of two possible isomers were carried out, showing that the compound, which contains the NCO GROUP trans to the Pd-C bond, is 4.29 kcal/mol more stable than the analogous one, where the imz ligand is trans to the Pd-C bond. The calculated molecular parameters, bond distances, and bond angles showed that the geometry around the metallic center is square-planar with the cyanate being linear. The theoretical infrared spectrum of C(1) symmetry (electronic state (1)A) is in accordance with the experimental one. It also verified the contribution of Pd (4d(xz) + 4d(yz)) and Pd (4d(xy)) in the HOMO and LUMO orbitals, respectively. (c) 2006 Elsevier B.V. All rights reserved.

Irregular Satellites of Jupiter: a study of the capture direction

The irregular satellites of Jupiter are believed to be captured asteroids or planetesimals. In the present work is studied the direction of capture of these objects as a function of their orbital inclination. We performed numerical simulations of the restricted three-body problem, Sun-Jupiter-particle, taking into account the growth of Jupiter. The integration was made backward in time. Initially, the particles have orbits as satellites of Jupiter, which has its present mass. Then, the system evolved with Jupiter losing mass and the satellites escaping from the planet. The reverse of the escape direction corresponds to the capture direction. The results show that the Lagrangian points L1 and L2 mainly guide the direction of capture. Prograde satellites are captured through these two gates with very narrow amplitude angles. In the case of retrograde satellites, these two gates are wider. The capture region increases as the orbital inclination increases. In the case of planar retrograde satellites the directions of capture cover the whole 360 degrees around Jupiter. We also verified that prograde satellites are captured earlier in actual time than retrograde ones.

Aggressive behaviour of cherubism in a teenager: 4-years of clinical follow-up associated with radiographic and histological features

Cherubism is a rare hereditary fibro-osseous childhood disease characterized by bone degradation and fibrous tissue replacement at the angles of the mandible and at the tuberosity areas of the maxilla that leads to prominence of the lower face and an appearance reminiscent of the cherub's portrayal in Renaissance art. This disease has an autosomal dominant hereditary characteristic. The purpose of this report is to analyse laboratory tests, clinicopathological and radiographic features of cherubism and its intraoral manifestations in a patient during 4-years of follow-up, correlating the features observed in this case with those of the literature. Also discussed is the atypical and aggressive behaviour of this case during puberty.

Wettability and photodegradation activity of sol-gel dip-coated zinc oxide films

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Use of radiographic measurements in the evaluation of dogs with medial patellar luxation

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Chemical process to separate iron oxides particles in pottery sample for EPR dating

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Two-dimensional photonic crystals in antimony-based films fabricated by holography

In this work, we demonstrated the fabrication of two-dimensional (2D) photonic crystals layers (2D-PCLs) by combining holographic recording and the evaporation of antimony-based glasses. Such materials present high refractive indices that can be tuned from 1.8 to 2.4, depending on the film composition; thus, they are interesting dielectric materials for fabrication of 2D-PCLs. The good quality of the obtained samples allowed the measurement of their PC properties through the well-defined Fano resonances that appear in the transmittance spectrum measurements at different incidence angles. The experimental results are in good agreement with the calculated band diagram for the hexagonal asymmetric structure. (C) 2008 American Institute of Physics.

Lubricating coating prepared by PIIID on a forming tool

In this work, the performance of a-C: H films produced by the hybrid Plasma Immersion Ion Implantation and Deposition technique as lubricating layers for a steel forming tool has been investigated. Hardened steel (AISI M2, 64 HRC) plates coated with a commercial TiN layer were used as substrates and the films were deposited in a vacuum chamber fitted with two parallel-plate electrodes. The discharges were generated in atmospheres composed of 91% C2H2 and 9% Ar by the application of radiofrequency power (13.56 MHz, 100 W) to the upper electrode while the lower one, also used as the sample holder, was biased with high voltage negative pulses (3.6 kV, 30 mu s, 300 Hz). A deposition time of 840 s was used. The effects of the gas pressure, p, on thickness, molecular structure, wettability, surface morphology and topography, hardness and friction coefficient of the films lwere investigated. Film thickness increased from 0.3 to 0.5 mu m when p was increased from 2.7 to 16.5 Pa. Generally, the films were slightly hydrophilic, with contact angles of around 84 degrees, and the deposition decreased the roughness of the steel. A polymer-like structure was detected in high pressure depositions and an amorphous carbon structure derived from the low pressure procedures. Hardness decreased from 8.2 to 7.0 GPa with increasing p. Improvement in tribological performance was indicated by the fall in the friction coefficient from 0.5 to 0.2 as the deposition pressure was reduced. Operating at the latter value (of mu) would lead to a significant reduction in wear and hence to significant economy in diverse industrial applications.