964 resultados para Altitudinal belt


Relevância:

10.00% 10.00%

Publicador:

Resumo:

Metamafic orthoderivate rocks, characterized by MORB signatures and paleoproterozoic ages occur in Cajamar region central east part of São Paulo State, Brazil. They are associated to philites, metasandstones and metalimestones of São Roque Group volcanosedimentary sequence, Southeastern portion of the Ribeira Belt. For the metamafic rocks the assemblage of metamorphic peak is represented by actinolitealbite- epidote-chlorite typical of regional metamorphism, greenschist facies. For a good characterization of P and T parameters of metamorphism microprobe analyses of main minerals were performed. Metamorphism did not destroy completely the primary mineralogy of original basalt and microgabbro, and augite crystals are registered in many samples, preserved together with metamorphic assemblage, and possibly indicate that the igneous temperatures of crystallization are between 900 and 1.100°C. Textures of mineral equilibrium for the peak paragenesis are not always present in the studied samples. It may be partially caused by the superposition of retrometamorphic events that is a consequence of regional shearing process. Where the equilibrium is reached, chiefly in the occurrences in the south of the area temperature and pressure determinations indicate values close to 487 ± 42°C and 8,2 ± 2.0 kbar, respectively. Other values for P and T lower than that of the peak were also obtained in central and north portion of the area and they are: 450 ± 68°C for T e 4.7 kbar for P and 315 ± 26°C for T and 3.0 kbar for P and may indicate that the mineral equilibrium was not reached in these samples or that they represent the retrometamorphic event. As a concluding remark considering the metamorphic P-T path now obtained one can say that the exhumation process in this area occurred by isothermal decompression.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

This work describes a control and supervision application takes into account the virtual instrumentation advantages to control and supervision industrial manufacturing stations belonging to the modular production system MPS® by Festo. These stations integrate sensors, actuators, conveyor belt and other industrial elements. The focus in this approach was to replace the use of programmable logic controllers by a computer equipped with a software application based on Labview and, together, performs the functions of traditional instruments and PLCs. The manufacturing stations had their processes modeled and simulated in Petri nets. After the models were implemented in Labview environment. Tests and previous similar works in MPS® installed in Automation Laboratory, at UNESP Sorocaba campus, showed the materials and methods used in this work allow the successful use of virtual instrumentation. The results indicate the technology as an advantageous approach for the automation of industrial processes, with gains in flexibility and reduction in project cost. © 2011 IEEE.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The Nabileque fluvial fan is a Quaternary depositional system located along the southwestern border of the Pantanal, covering an area of approximately 9,100 km 2. It is a peculiar alluvial system because it is not associated with inflow from adjacent plateaus. The Nabileque megafan is formed by the Paraguay River at the exit of the Pantanal wetland, coalescing with the Pilcomayo megafan of the Chaco basin. A geomorphological zonation analysis was performed making use of remote sensing data with field verification. Most of the area is a vast alluvial plain made of Pleistocene deposits, whose surface is marked by the presence of an intricate network of distributary paleochannels. Areas blanketed by Pleistocene deposits are dissected by erosional streams and subject to frequent flooding events. The Paraguay River flows in a meander belt constrained by NE fractures associated with the Transbrasiliano Lineament, but deflects towards the SSE after the Negro River confluence composing the system's peripheral drainage. An abandoned meander belt is preserved within a remarkable N-S incised-valley that is interpreted as the ancient Paraguay River course. Processes of avulsion and river capture are suggested to explain the observed changes of the river course. The Nabileque River is an underfit stream within the incised-valley, cutting paleomeanders and point bars of the previous Paraguay River course.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Rio Branco Rapakivi Batholith is located on the southwestern portion of the Amazonian Craton in Mato Grosso and belongs to the Cachoeirinha Tectonic Domain, part of the Rio Negro-Juruena Geochronological Province, Central Brasil. The batholith is constituted by microgabbros to quartz microgabbros and microdiorites to quartz microdiorites, middle to fine-grained equigranular to porphyritic varieties form the Rio Branco Intrusive Basic Suite, showing a discontinuous distribution and located near the margins of the intrusion.Majorly constituted by porphyritic, granophyric and isotropic facies of Rio Branco Intrusive Acid Suit which is composed by older dark red rapakivi monzogranites to quartz monzonites and quartz sienites (1403±0.6 Ma) and the younger red rapakivi leuco-monzogranites (1382±49 Ma) and late equigranular to pegmatitic monzogranites. The magmatism is constituted by two distinct magmas related to the end of the collisional event of Cachoeirinha Orogeny, one with alkaline basalts generated in an intraplate environment and the other postorogenic to anorogenic with peraluminous to metaluminous compositions and define a high-K calc-alkaline to shoshonitic magmatism in transition among the I- and A-types. The contacts are marked by extensive mafic sills and dikes of alkaline basalts derived from intraplate environment of the Salto do Céu Intrusive Basic Suite (±808 Ma) associate to the Sunsás-Aguapei Orogenic Belt and metasedimentary rocks of the Aguapeí Grup.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

This work aimed at describing the Neoproterozoic evolution of a Southern Brasília Fold Belt segment, in Tapira area (southwest of Minas Gerais state, Brazil), using detailed geologic mapping. This area, the Canastra Group type-area, has showed great tectonic and stratigraphic complexities unlike the simplicity suggested in previous works. From recognizing the main tectonic discontinuities, it was possible to subdivide the area into some domains. In the west domain, they were individualized in tectonic sheet I, marked by pelitic rocks and pelitic-graphite rocks with psammitic intercalations, and II, pelitic rocks with psammitic and mafic-ultramafic intercalations overlapped by gneisses. In the east domain, a group of three tectonic sheets was defined, in which, in the two lower tectonic sheets, pelitic and pelitic-graphite rocks with psammitic rock intercalations prevailed, which is different in metamorphic conditions. The lower tectonic sheet is marked by mineralogical associations with muscovite + chlorite + quartz ± graphite ± albite, without biotite; however, the superior one is with muscovite + quartz + garnet ± chlorite ± biotite ± chloritoid ± graphite ± albite. In the upper tectonic sheet, pelitic rocks with local contributions of psammitic and ultramafics rocks occur. In the south domain, psammitic rocks basically occur with contributions of pelitics and rudaceous rocks, where the preservation of textures and sedimentary structures is common. Rocks of the several domains are interpreted as part of a passive continental margin basin, located in the western margin of the São Francisco paleocontinent. Thus, the south domain rocks would represent the facies of proximal platform; rocks of the lower and middle tectonic sheets (east domain) and of the tectonic sheet I (west domain) are of facies distal platform; and the ones from the upper tectonic sheet (east domain) and tectonic sheet II (west domain) were acknowledged as deposited in an environment of continental shelf and/or oceanic seafoor.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

This paper is a contribution for the understanding of the geological evolution of Guaxupé Complex. New data on petrography and mineral chemistry as well as estimates of metamorphic (P-T) conditions in the region of Arceburgo - Santa Cruz do Prata (MG) Brazil, at the southern portion of the Brasília Belt, more specifically at the Guaxupé Complex (Domain) are now presented. The lithotypes are high-grade metamorphic rocks subdivided into two groups: metasediments and granulites (orthoderivates). Chemical analysis of minerals was performed in three steps including core and rim of amphibole, pyroxene, feldspar, biotite, and garnet from samples of the following rock types: enderbites, mafic granulites, charnockites, and alkali feldspar charnockites. Results obtained with geothermobarometric calculations show metamorphic peak around 900°C of T and 10 kbar of P. Enderbites and tonalite granulites (mafic) show the highest values of temperature and pressure, while alkali feldspar charnockites show the lowest probably due to their late generation in relation to mafic rock types (enderbites and mafic tonalite granulite). Chemical mineral analysis in metamorphic parageneses and geothermobarometric calculations indicate that the possible metamorphic peak may be higher than 900°C of temperature and around 10 kbar of pressure, within a isothermal decompression (ITD) regime.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The Pantanal wetland is an extensive depositional tract characterized by the presence of fluvial megafans, from which that of the Taquari River is the most extensive and well known. Located on the northern border of the Pantanal, the São Lourenço megafan is a large distributary fluvial system with an area of 16,000 km2, but poorly known regarding its geomorphological and geological features. The Sao Lourenço and the Taquari are coalescent megafans, having the Piquiri interfan meander river in between them. Based on the interpretation of satellite images and field validation, it was possible to identify channel patterns, to interpret depositional and erosional processes, to recognize the phenomena of river avulsion and to map depositional lobes. Three geomorphological zones were recognized on the São Lourenço megafan: 1) abandoned depositional lobes located in the upper/intermediate fan, composed of Pleistocene fluvial deposits and exhibiting distributary paleochannels on their surfaces, which are currently being dissected by tributary channels; 2) an active Holocene confined meander belt formed by fluvial aggradation in a N65E incised-valley; 3) active depositional lobes placed on the distal part of the system, which are the main site of sedimentation and are characterized by frequent avulsion events, channel bifurcation, distributary drainage pattern and the presence of depositional lobated landforms. The active depositional lobes were formed due to an important event of river avulsion that caused the lower portion of the meander belt to be abandoned.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Context. Close encounters with (1) Ceres and (4) Vesta, the two most massive bodies in the main belt, are known to be a mechanism of dynamical mobility able to significantly alter proper elements of minor bodies, and they are the main source of dynamical mobility for medium-sized and large asteroids (D > 20 km, approximately). Recently, it has been shown that drift rates caused by close encounters with massive asteroids may change significantly on timescales of 30 Myr when different models (i.e., different numbers of massive asteroids) are considered. Aims. So far, not much attention has been given to the case of diffusion caused by the other most massive bodies in the main belt: (2) Pallas, (10) Hygiea, and (31) Euphrosyne, the third, fourth, and one of the most massive highly inclined asteroids in the main belt, respectively. Since (2) Pallas is a highly inclined object, relative velocities at encounter with other asteroids tend to be high and changes in proper elements are therefore relatively small. It was thus believed that the scattering effect caused by highly inclined objects in general should be small. Can diffusion by close encounters with these asteroids be a significant mechanism of long-term dynamical mobility? Methods. By performing simulations with symplectic integrators, we studied the problem of scattering caused by close encounters with (2) Pallas, (10) Hygiea, and (31) Euphrosyne when only the massive asteroids (and the eight planets) are considered, and the other massive main belt asteroids and non-gravitational forces are also accounted for. Results. By finding relatively small values of drift rates for (2) Pallas, we confirm that orbital scattering by this highly inclined object is indeed a minor effect. Unexpectedly, however, we obtained values of drift rates for changes in proper semi-major axis a caused by (10) Hygiea and (31) Euphrosyne larger than what was previously found for scattering by (4) Vesta. These high rates may have repercussions on the orbital evolution and age estimate of their respective families. © 2013 ESO.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

(10) Hygiea is the fourth largest asteroid of the main belt, by volume and mass, and it is the largest member of its family, that is made mostly by low-albedo, C-type asteroids, typical of the outer main belt. Like many other large families, it is associated with a 'halo' of objects, that extends far beyond the boundary of the core family, as detected by traditional hierarchical clustering methods (HCM) in proper element domains. Numerical simulations of the orbital evolution of family members may help in estimating the family and halo family age, and the original ejection velocity field. But, in order to minimize the errors associated with including too many interlopers, it is important to have good estimates of family membership that include available data on local asteroid taxonomy, geometrical albedo and local dynamics. For this purpose, we obtained synthetic proper elements and frequencies of asteroids in the Hygiea orbital region, with their errors. We revised the current knowledge on asteroid taxonomy, including Sloan Digital Sky Survey-Moving Object Catalog 4th release (SDSS-MOC 4) data, and geometric albedo data from Wide-field Infrared Survey Explorer (WISE) and Near-Earth Object WISE (NEOWISE). We identified asteroid family members using HCM in the domain of proper elements (a, e, sin (i)) and in the domains of proper frequencies most appropriate to study diffusion in the local web of secular resonances, and eliminated possible interlopers based on taxonomic and geometrical albedo considerations. To identify the family halo, we devised a new hierarchical clustering method in an extended domain that includes proper elements, principal components PC1, PC2 obtained based on SDSS photometric data and, for the first time, WISE and NEOWISE geometric albedo. Data on asteroid size distribution, light curves and rotations were also revised for the Hygiea family. The Hygiea family is the largest group in its region, with two smaller families in proper element domain and 18 families in various frequencies domains identified in this work for the first time. Frequency groups tend to extend vertically in the (a, sin (i)) plane and cross not only the Hygiea family but also the near C-type families of Themis and Veritas, causing a mixture of objects all of relatively low albedo in the Hygiea family area. A few high-albedo asteroids, most likely associated with the Eos family, are also present in the region. Finally, the new multidomains hierarchical clustering method allowed us to obtain a good and robust estimate of the membership of the Hygiea family halo, quite separated from other asteroids families halo in the region, and with a very limited (about 3 per cent) presence of likely interlopers. © 2013 The Author Published by Oxford University Press on behalf of the Royal Astronomical Society.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

In a previous work, GiuliattiWinter et al. found several stable regions for test particles in orbit around Pluto associated with families of periodic orbits obtained in the circular, restricted three-body problem. They have shown that a possible eccentricity of the Pluto-Charon binary slightly reduces but does not destroy any of these stable regions. In thiswork, we extended their results by analysing the cases with the orbital inclination (I) equal to zero and considering the argument of pericentre (w) equal to 90°, 180° and 270°. We explore the influence of the orbital inclination of the particles in these stable regions. In this case, the initial inclination varies from 10° to 170° in steps of 10°. We also present a sample of results for the longitude of the ascending node Ω = 90°, considering the cases I = 20°, 50°, 130° and 180°. Our results show that stable regions are present in all of the inclined cases, except when the initial inclination of the particles is equal to 110°. A sample of 3D trajectories of quasi-periodic orbits were found related to the periodic orbits obtained in the planar case by Giuliatti Winter et al. © 2013 The Authors. Published by Oxford University Press on behalf of the Royal Astronomical Society.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Impacts of micrometeoroids on the surfaces of the plutonian small satellites Nix and Hydra can generate dust particles. Even in this region so far from the Sun these tiny ejected particles are under the effects of the solar radiation pressure. In this work, we investigate the orbital evolution of the escaping ejecta from both the small satellites under the effects of the radiation pressure combined with the gravitational effects of Pluto, Charon, Nix and Hydra. The mass production rate of micron-sized dust particles generated by micrometeoroids hitting the satellites is obtained, and numerical simulations are performed to derive the lifetime of the ejecta. These pieces of information allow us to estimate the optical depth of a putative ring, which extends from the orbits of Nix to Hydra. The ejected particles, between the orbits of Nix and Hydra, form a wide ring of about 16 000 km. Collisions with the massive bodies and escape from the system are mainly determined by the effects of the solar radiation pressure. This is an important loss mechanism, removing 30 per cent of the initial set of 1 μm-sized particles in 1 yr. The surviving particles form a ring too faint to be detectable with the derived maximum optical depth of 4 × 10-11. © 2013 The Authors Published by Oxford University Press on behalf of the Royal Astronomical Society.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

In the S - SW region of Goiás State, Brazil, the Araxá Group is constituted of a metasedimentary sequence containing schistose and gneissic (garnet-biotite-quartz schists, feldspatic garnet-biotite-quartz schists, garnet-biotite-quartz paragneisses, with muscovite and locally amphibole, epidote, kyanite and staurolite. This sequence presents intercalations of metaul-tramafc rocks (serpentinite, actinolite schist, talc schist, chlorite schist), metamafc ones (amphibolite, amphibole schist containing or not garnet, garnet amphibolite) and associated granitic bodies. Chemically, the Araxá Group metasediments present peraluminous composition, showing enrichment in LILE, when compared with HFSE and REE, and displaying negative anomalies of Nb, Ta, Sr, P and Ti. Their chemical composition is that of greywake and the chemical characteristics of the sediments are generated in magmatic arcs. Isotopic data for Sm/Nd - model ages (TDM) between 1,04 - 1,51 and 1,76 - 2,26 Ga - and U/Pb (predominance of zircon with ages < 900 Ma) suggest that these metasediments have Neoproterozoic rocks as the source rocks. Chemical and isotopic characteristics of the studied metasediments suggest that their source are rocks originated in magmatic arcs and that they were deposited in a fore arc basin developed in the margins of Neoproterozoic island arcs.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Biogeographical systems can be analyzed as networks of species and geographical units. Within such a biogeographical network, individual species may differ fundamentally in their linkage pattern, and therefore hold different topological roles. To advance our understanding of the relationship between species traits and large-scale species distribution patterns in archipelagos, we use a network approach to classify birds as one of four biogeographical species roles: peripherals, connectors, module hubs, and network hubs. These roles are based upon the position of species within the modular network of islands and species in Wallacea and the West Indies. We test whether species traits - including habitat requirements, altitudinal range-span, feeding guild, trophic level, and body length - correlate with species roles. In both archipelagos, habitat requirements, altitudinal range-span and body length show strong relations to species roles. In particular, species that occupy coastal- and open habitats, as well as habitat generalists, show higher proportions of connectors and network hubs and thus tend to span several biogeographical modules (i.e. subregions). Likewise, large body size and a wide altitudinal range-span are related to a wide distribution on many islands and across several biogeographical modules. On the other hand, species restricted to interior forest are mainly characterized as peripherals and, thus, have narrow and localized distributions within biogeographical modules rather than across the archipelago-wide network. These results suggest that the ecological amplitude of a species is highly related to its geographical distribution within and across bio geographical subregions and furthermore supports the idea that large-scale species distributions relate to distributions at the local community level. We finally discuss how our biogeographical species roles may correspond to the stages of the taxon cycle and other prominent theories of species assembly. © 2013 The Authors.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Pós-graduação em Ciências da Motricidade - IBRC