ZnO films for surface acoustic wave microfluidic devices

SAW devices were fabricated on c-axis oriented ZnO films grown on Si substrates. Effects of film thickness on the film microstructure and acoustic frequencies were studied. Both Rayleigh and Sezawa mode waves were detected on the devices, and their resonant frequencies were found to decrease with increase in film thickness.

Optically triggered polarisation bistability in GaInAsP twin stripe injection lasers using integrated devices

A bistable polarization switching element and optical triggering source has been produced by etching a facet in a twin stripe semiconductor laser. The switching element is formed by a pair of stripe segments at one end of the device and triggered with short light pulses from the other two segments. Detector limited switching risetimes have been measured at 250 ps.

Multi-colour switching of polymer stabilized chiral nematic liquid crystal devices

We have fabricated a series of polymer stabilized chiral nematic test cells for use as flexoelectro-optic devices. The devices fabricated were based on commercial chiral nematic mixtures which were polymer stabilized so as to enhance the uniformity and stability of the uniform lying helix texture in the cells. During fabrication and test procedures a series of unusual scattering states have been observed within the devices at different viewing angles. The observations made so far indicate that the properties of the scattering state lies somewhere between the focal conic texture and the Grandjean or planar texture and that the devices exhibit both a helical pitch selective reflection and scattering effect. What is even more dramatic is that the wavelength selectivity of the scattering effect can be tuned by an applied field. In addition, we show that it is possible to achieve good uniform lying helix textures from such devices. Moreover, we show that in certain cases the spontaneous alignment of the helix in the plane of the device opens up the possibility of a new mode of switching. Flexoelectric, Redshift, Coloured scattering, Liquid crystal, Polymer-stabilized liquid-crystal;.

Reconfigurable free-space optical switching technologies for storage area networks

Reconfigurable shutter-based free-space optical switching technologies using fiber ribbon and multiple wavelengths per fiber for Storage Area Networks (SANs) application are presented and demonstrated. ©2009 SPIE-OSA-IEEE.

Reconfigurable free-space optical switching technologies for storage area networks

Reconfigurable shutter-based free-space optical switching technologies using fiber ribbon and multiple wavelengths per fiber for Storage Area Networks (SANs) application are presented and demonstrated. ©2009 Optical Society of America.

The MBA-LBA I period in the Kourion region : new evidences from Erimi- Laonin tou Porakou (Lemesos, Cyprus)

The evidence from Erimi-Laonin tou Porakou within the Kouris valley settlement system can offer further new data to outline a picture of the development trends from MBA to LBA I periods in the Kourion region. As to this area, such a “transitional” phase could be particularly relevant to better understand the development process of the mature LBA II–III urban centers (in Alassa as well as the most recent discovered in Erimi-Pitharka). In 2008–2009 a focus investigation (an intensive survey, geoperspections and excavations) within the Kouris Valley Project has been addressed to the site of Erimi-Laonin tou Porakou, which lies on one of the highest hilltops facing southward the Kouris dam. The excavations evidenced a double circuit wall which surrounds the top mound and the lower terrace. The top mound (Area A) has been widely occupied by a complex workshop, directly linked with a storage area. The natural limestone bedrock has been worked out to arrange a system of carved deep basins connected each other by a series of flow channels. Southward from the workshop, a large storage area has been cleared, with a relevant assemblage of big pithoi and storage devices. The first lower terrace area (Area B) has been possibly occupied by a domestic quarter; a cemetery area (Area E) has been also evidenced outside the external circuit wall, where a series of five rock-cut tombs (Tombs 228– 232) with single chamber and small incoming dromoi has been excavated.

Numerical Investigation On Detonation Cell Evolution In A Channel With Area-Changing Cross Section

The two-dimensional cellular detonation propagating in a channel with area-changing cross section was numerically simulated with the dispersion-controlled dissipative scheme and a detailed chemical reaction model. Effects of the flow expansion and compression on the cellular detonation cell were investigated to illustrate the mechanism of the transverse wave development and the cellular detonation cell evolution. By examining gas composition variations behind the leading shock, the chemical reaction rate, the reaction zone length, and thermodynamic parameters, two kinds of the abnormal detonation waves were identified. To explore their development mechanism, chemical reactions, reflected shocks and rarefaction waves were discussed, which interact with each other and affect the cellular detonation in different ways.

Large Scale Fabrication Of Periodical Bowl-Like Micropatterns Of Single Crystal Zno

Nanostructured ZnO materials are of great significance for their potential applications in photoelectronic devices, light-emitting displays, catalysis and gas sensors. In this paper, we report a new method to produce large area periodical bowl-like micropatterns of single crystal ZnO through aqueous-phase epitaxial growth on a ZnO single crystal substrate. A self-assembled monolayer of polystyrene microspheres was used as a template to confine the epitaxial growth of single crystal ZnO from the substrate, while the growth morphology was well controlled by citrate anions. Moreover, it was found that the self-assembled monolayer of colloidal spheres plays an important role in reduction of the defect density in the epitaxial ZnO layer. Though the mechanism is still open for further investigation, the present result indicates a new route to suppress the dislocations in the fabrication of single crystal ZnO film. A predicable application of this new method is for the fabrication of two-dimensional photonic crystal structures on light emitting diode surfaces.

Cuantificación de carbono en la biomasa aérea de café (Coffea arábica L.) con sombra, en la comarca Palo de Sombrero, Jinotega, Nicaragua

Los sistemas agroforestales son potenciales sumideros de dióxido de carbono, contribuyendo así a mitigar el calentamiento de la tierra por efecto de las emisiones de C0 2 . El propósito de la presente investigación, es cuantificar carbono orgánico almacenado en sistema de café. Esta investigación se desarrolló en la hacienda Santa Maura, Jinotega., altitud 1000–1250 msnm, temperatura promedio de 19 a 23º C, suelos del tipo molisol. Se identificaron tres tipologías de cafeto de estudio que se diferencian por su variedad, edad y densidad de establecimiento. Se realizó un muestreo sistemático, intensidad del 2 %. La unidad de muestreo fue una parcela circular de 250 m 2 , en cada parcela de muestreo se tomó un árbol de eje central, procediendo a inventariar e identificar las especies de árboles y cafeto. Se midieron la altura total, altura fuste limpio, diámetro a la altura del pecho del que muestrea, pesos húmedo y seco de los diferente componentes. En los depósitos aéreos de cafetos y especies de sombra, se estimó la biomasa y contenido de carbono. En la tipología dos se encontró el mayor promedio de C almacenado con 19.86 tonelada métricas de carbono por hectárea (tMC ha -1 ), seguido del tipo tres, con 11.12 tMC ha -1 y por último, el tipo uno con 5.5 tMC ha -1 . La diferencia de contenido de C entre tipología, está directamente ligado a la densidad, especie de árbol de sombra, edad y manejo de la plantación.

MD simulation of the effect of contact area and tip radius on nanoindentation

Molecular dynamics simulations of nanoindentation are performed on monocrystal copper. A new "contact atoms" method is presented for calculating the contact area. Compared with conventional methods, this method can provide the contact area more accurately not only for sink-in but also for pile-up situation. The effect of tip radius on indentation is investigated too. The results indicate that the measured hardness of the material will become higher as the tip radius increases.