The relationship between informal caregiving and mortality: an analysis using the ONS Longitudinal Study of England and Wales.

BACKGROUND:

Many studies have suggested that caregiving has a detrimental impact on health. However, these conclusions are challenged by research which finds evidence of a comparative survivorship advantage, as well as work which controls for group differences in the demand for care.

METHODS:

We use a large record linkage study of England and Wales to investigate the mortality risks of carers identified in the 2001 Census. The analysis focuses on individuals aged 35-74 living with others in private households and a distinction is made between those providing 1-19 and 20 or more hours of care per week. Logit models identify differences in carers' health at baseline and postcensal survival is analysed using Cox proportional hazards models.

RESULTS:

12.2% of study members reported providing 1-19 h of care and 5.4% reported providing 20 or more hours. While carers were significantly more likely to report poorer health at baseline, survival analyses suggested that they were at a significantly lower risk of dying. This comparative advantage also held when the analyses were restricted to individuals living with at least one person with poor health.

CONCLUSIONS:

The comparative mortality advantage revealed in this analysis challenges common characterisations of carers' health and draws attention to important differences in the way carers are defined in existing analyses. The survival results are consistent with work using similar data for Northern Ireland. However, the study also affords more uniform conclusions about carers' baseline health and this provides grounds for questioning existing hypotheses about the reasons for this advantage.

Managing Equivalent Representations of Design and Analysis Models

There is a requirement for better integration between design and analysis tools, which is difficult due to their different objectives, separate data representations and workflows. Currently, substantial effort is required to produce a suitable analysis model from design geometry. Robust links are required between these different representations to enable analysis attributes to be transferred between different design and analysis packages for models at various levels of fidelity.

This paper describes a novel approach for integrating design and analysis models by identifying and managing the relationships between the different representations. Three key technologies, Cellular Modeling, Virtual Topology and Equivalencing, have been employed to achieve effective simulation model management. These technologies and their implementation are discussed in detail. Prototype automated tools are introduced demonstrating how multiple simulation models can be linked and maintained to facilitate seamless integration throughout the design cycle.

Multibody modelling of a TB31 and a TB32 crash test with vertical portable concrete barriers: model verification and sensitivity analysis.

In this article the multibody simulation software package MADYMO for analysing and optimizing occupant safety design was used to model crash tests for Normal Containment barriers in accordance with EN 1317. The verification process was carried out by simulating a TB31 and a TB32 crash test performed on vertical portable concrete barriers and by comparing the numerical results to those obtained experimentally. The same modelling approach was applied to both tests to evaluate the predictive capacity of the modelling at two different impact speeds. A sensitivity analysis of the vehicle stiffness was also carried out. The capacity to predict all of the principal EN1317 criteria was assessed for the first time: the acceleration severity index, the theoretical head impact velocity, the barrier working width and the vehicle exit box. Results showed a maximum error of 6% for the acceleration severity index and 21% for theoretical head impact velocity for the numerical simulation in comparison to the recorded data. The exit box position was predicted with a maximum error of 4°. For the working width, a large percentage difference was observed for test TB31 due to the small absolute value of the barrier deflection but the results were well within the limit value from the standard for both tests. The sensitivity analysis showed the robustness of the modelling with respect to contact stiffness increase of ±20% and ±40%. This is the first multibody model of portable concrete barriers that can reproduce not only the acceleration severity index but all the test criteria of EN 1317 and is therefore a valuable tool for new product development and for injury biomechanics research.

The role of private care in the interval between diagnosis and treatment of breast cancer in Northern Ireland: an analysis of Registry data

Objective: To examine the differences in the interval between diagnosis and initiation of treatment among women with breast cancer in Northern Ireland.

Design: A cross-sectional observational study.
Setting: All breast cancer care patients in the Northern Ireland Cancer Registry in 2006.
Participants: All women diagnosed and treated for breast cancer in Northern Ireland in 2006.
Main outcome measure: The number of days between diagnosis and initiation of treatment for breast cancer.

Results: The mean (median) interval between diagnosis and initiation of treatment among public patients was 19 (15) compared with 14 (12) among those whose care involved private providers. The differences between individual public providers were as marked as those between the public and private sector - the mean (median) ranging between 14 (12) and 25 (22) days. Multivariate models revealed that the differences were evident when a range of patient characteristics were controlled for including cancer stage.

Conclusions: A relatively small number of women received care privately in Northern Ireland but experienced shorter intervals between diagnosis and initiation of treatment than those who received care wholly in the public system. The variation among public providers was as great as that between the public and private providers. The impact of such differences on survival and in light of waiting time targets introduced in Northern Ireland warrants investigation.

Genome-wide association meta-analysis of human longevity identifies a novel locus conferring survival beyond 90 years of age

The genetic contribution to the variation in human lifespan is approximately 25%.  Despite the large number of identified disease-susceptibility loci, it is not known which loci influence population mortality.  We performed a genome-wide association meta-analysis of 7729 long-lived individuals of European descent (≥ 85 years) and 16121 younger controls (< 65 years) followed by replication in an additional set of 13060 long-lived individuals and 61156 controls. In addition, we performed a subset analysis in cases ≥ 90 years. We observed genome-wide significant association with longevity, as reflected by survival to ages beyond 90 years, at a novel locus, rs2149954, on chromosome 5q33.3 (OR = 1.10, P =1.74 x 10-8). We also confirmed association of rs4420638 on chromosome 19q13.32 (OR = 0.72, P = 3.40 x 10-36), representing the TOMM40/APOE/APOC1 locus. In a prospective meta-analysis (n = 34103) the minor allele of rs2149954 (T) on chromosome 5q33.3 associates with increased survival (HR = 0.95, P = 0.003). This allele has previously been reported to associate with low blood pressure in middle age. Interestingly, the minor allele (T) associates with decreased cardiovascular mortality risk, independent of blood pressure. We report on the first GWAS-identified longevity locus on chromosome 5q33.3 influencing survival in the general European population. The minor allele of this locus associates with low blood pressure in middle age, although the contribution of this allele to survival may be less dependent on blood pressure. Hence, the pleiotropic mechanisms by which this intragenic variation contributes to lifespan regulation have to be elucidated.

Beta-blocker usage and breast cancer survival: a nested case-control study within a UK clinical practice research datalink cohort.

Background: To investigate the association between post-diagnostic beta-blocker usage and risk of cancer-specific mortality in a large population-based cohort of female breast cancer patients.

Methods: A nested case-control study was conducted within a cohort of breast cancer patients identified from cancer registries in England(using the National Cancer Data repository) and diagnosed between 1998 and 2007. Patients who had a breast cancer-specific death(ascertained from Office of National Statistics death registration data) were each matched to four alive controls by year and age at diagnosis. Prescription data for these patients were available through the Clinical Practice Research Datalink. Conditional logistic regression models were used to investigate the association between breast cancer-specific death and beta-blocker usage.

Results: Post-diagnostic use of beta-blockers was identified in 18.9% of 1435 breast cancer-specific deaths and 19.4% of their 5697 matched controls,indicating little evidence of association between beta-blocker use and breast cancer-specific mortality [odds ratio (OR) = 0.97,95% confidence interval (CI) 0.83, 1.13]. There was also little evidence of an association when analyses were restricted to cardio non-selective beta-blockers (OR = 0.90, 95% CI 0.69, 1.17). Similar results were observed in analyses of drug dosage frequency and duration, and beta-blocker type.

Conclusions: In this large UK population-based cohort of breast cancer patients,there was little evidence of an association between post-diagnostic beta-blocker usage and breast cancer progression. Further studies which include information on tumour receptor status are warranted to determine whether response to beta-blockers varies by tumour subtypes.

Beta-blocker usage and prostate cancer survival:A nested case-control study in the UK Clinical Practice Research Datalink cohort

Background: Recent laboratory and epidemiological evidence suggests that beta-blockers could inhibit prostate cancer progression. Methods: We investigated the effect of beta-blockers on prostate cancer-specific mortality in a cohort of prostate cancer patients. Prostate cancer patients diagnosed between 1998 and 2006 were identified from the UK Clinical Practice Research Database and confirmed by cancer registries. Patients were followed up to 2011 with deaths identified by the Office of National Statistics. A nested case-control analysis compared patients dying from prostate cancer (cases) with up to three controls alive at the time of their death, matched by age and year of diagnosis. Odds ratios (OR) and 95% confidence intervals (CI) were calculated using conditional logistic regression. Results: Post-diagnostic beta-blocker use was identified in 25% of 1184 prostate cancer-specific deaths and 26% of 3531 matched controls. There was little evidence (P=0.40) of a reduction in the risk of cancer-specific death in beta-blocker users compared with non-users (OR=0.94 95% CI 0.81, 1.09). Similar results were observed after adjustments for confounders, in analyses by beta-blocker frequency, duration, type and for all-cause mortality. Conclusions: Beta-blocker usage after diagnosis was not associated with cancer-specific or all-cause mortality in prostate cancer patients in this large UK study.

Using mesh-geometry relationships to transfer analysis models between CAE tools

Integrating analysis and design models is a complex task due to differences between the models and the architectures of the toolsets used to create them. This complexity is increased with the use of many different tools for specific tasks using an analysis process. In this work various design and analysis models are linked throughout the design lifecycle, allowing them to be moved between packages in a way not currently available. Three technologies named Cellular Modeling, Virtual Topology and Equivalencing are combined to demonstrate how different finite element meshes generated on abstract analysis geometries can be linked to their original geometry. Cellular models allow interfaces between adjacent cells to be extracted and exploited to transfer analysis attributes such as mesh associativity or boundary conditions between equivalent model representations. Virtual Topology descriptions used for geometry clean-up operations are explicitly stored so they can be reused by downstream applications. Establishing the equivalence relationships between models enables analysts to utilize multiple packages for specialist tasks without worrying about compatibility issues or substantial rework.