Electrocatalytic oxidation of dopamine by ferrocene in lipid film cast on a glassy carbon electrode

The ferrocene-lipid film electrode was successfully prepared by means of casting the solution of ferrocene and lipid in chloroform onto a glassy carbon (GC) electrode surface. Ferrocene saved in the biological membrane gave a couple of quasi-reversible peaks of cyclic voltammogram. The electrode displays a preferential electrocatalytic oxidation of dopamine (DA). The effect of electroccatalytic oxidation of DA depends on the solution pH and the negative charge lipid is in favor of catalytic oxidation of DA. The characteristic was employed for separating the electrochemical responses of DA and ascorbic acid (AA). The electrode was assessed for the voltammetric differentiation of DA and AA. The measurement of DA can be achieved with differential pulse voltammetry in the, presence of high concentration of AA. The catalytic peak current was proportional to the concentration of DA in the range of 1 x 10(-4)-3 x 10(-3) mol/L.

Preparation, characterization and photophysical properties of layered zirconium bis(monohydrogenphosphate) intercalated with rare earth complexes

Two kinds of rare earth (RE) complexes were intercalated into zirconium bis(monohydrogenphosphate) (alpha -ZrP) by exchanging the RE complexes into the p-methyoxyaniline (PMA) preintercalated compound Zr(O3POH)(2). 2PMA (alpha -ZrP . 2PMA). Powder X-ray diffraction patterns reveal that Eu(DBM)(3)phen (DBM: dibenzoylmethane, phen: 1,10-phenanthroline) and Tb(AA)(3)phen (AA: acetylacetone) intercalated into alpha -ZrP . 2PMA. This was confirmed by the UV-visible spectra of both the RE complexes and the assemblies. At the same time, the assemblies have better luminescent properties, and the fluorescent lifetimes of RE3+ in the excited state in the assemblies are much longer than those in the complexes. The stabilities of the assemblies under UV radiation are much better than those of the RE complexes.

官能化线性低密度聚乙烯的流变行为及力学性能

利用毛细管流变仪研究了官能化LLDPE(LLDPE g AA、LLDPE g GMA)的流变行为。结果表明 :在高的剪切应力下LLDPE g AA、LLDPE g GMA的表观粘度比纯LLDPE的小。表明官能化LLDPE的流动性提高了 ,其加工性能变好。官能化LLDPE的表观粘度随接枝单体含量的增加而降低 ,这说明接枝到LLDPE分子链上的单体起到了内润滑剂的作用。利用Instron 112 1拉力机测试了官能化LLDPE的力学性能。结果表明 ,其拉伸强度 ,杨氏模量和断裂伸长率与纯LLDPE相比没有明显的变化。

水溶液共聚法合成耐盐性高吸水性树脂

以丙烯酰胺 (AM)、丙烯酸 (AA)、甲基丙烯酸羟乙酯 (HEMA)为单体 ,采用水溶液共聚法合成了交联型P(AM -NaAA-HEMA)三元共聚高吸水性树脂。研究了影响共聚物性能的主要因素 :单体组成 ,交联剂用量 ,引发剂用量等的影响。并对其保水性 ,吸水、吸盐水速率进行了测定。该树脂吸水速度快 ,吸水率 (去离子水 )达 10 0 0g·g-1,吸盐水 (0 9%NaCL) 88g·g-1。

Photochemical synthesis and crystal structure of a charge transfer salt [HMDH2][(H2PMoMo11O40)-Mo-v]center dot 2AA center dot 3H(2)O center dot DMF

The title supramolecular compound, [HMDH2][(H2PMoMo11O40)-Mo-V] . 2AA . 3H(2)O . DMF (HMD = hexamethylene diamine; AA=acetaldehyde; DMF=N,N-dimethyl formamide), has been photochemically synthesized by using elemental analysis, IR, solid diffusion reflectance, electronic spectra, ESR spectra and X-ray single-crystal analysis. The crystallographic data: triclinic, P (1) over bar, a=14.092(2), b=14.347(3), c=14.358(3)Angstrom, alpha = 75.10(3), beta = 80.70(3), gamma = 80.73(3)degrees, V = 2746.6(10)Angstrom (3), Z = 2, M-r = 2081.68, D-c=2.517g/cm(3), F(000) =1970, mu (MoK alpha) =2.766mm(-1). The structure has been refined to R =0.0832 and wR=0.2638, by full-matrix least-squares method. The title compound is composed of hexamethylene diamine, two acetaldehyde molecules, three water molecules, one N,N-dimethylformamide and [(H2PMoMo11O40)-Mo-V](2-) heteropoly anion.

Morphology, structure, and rheological property of linear low-density polyethylene grafted with acrylic acid

The chain structure, spherulite morphology, and theological property of LL-DPE-g-AA were studied by using electronspray mass spectroscopy, C-13-NMR, and rheometer. Experimental evidence proved that AA monomers grafted onto the LLDPE backbone formed multiunit AA branch chains. It was found that AA branch chains could hinder movement of the LLDPE main chain during crystallization. Spherulites of LLDPE became more anomalous because of the presence of AA branch chains. Rheological behavior showed that AA branch chains could act as an inner plasticizer at the temperature range of 170-200 degreesC, which made LLDPE-g-AA easy to further process. (C) 2001 John Wiley & Sons, Inc.

己二胺-12-钼磷酸电荷转移盐的光化学合成与晶体结构

采用光化学法合成一种有机-无机电荷转移盐，（HMDH2）[H2PMo12O40]·AA·3H2O·DMF（HMD = 1,6-己二胺，AA = 乙醛，DMF = N,N-二甲基甲酰胺）超分子化合物。用元素分析，IR，固体漫反射电子光谱，ESR进行了表征。X-射线四圆衍射测定其晶体结构属三斜晶系，空间群 Pī，Mr=2081.68，晶胞参数a = 14.092(3)，b =14.347(3)，c =14.358(3)?，α=75.10(3)，β=80.70(3)，γ=80.73(3)°,V=2746.6(10)?3，Z=2，Dc=2.517g/cm3，F(000)=1970，μ(MoKα)=2.766mm- 1，全矩阵最小二乘法修正至R=0.0832，wR=0.2638。标题化合物是由1个质子化的1,6-己二胺、12-钼磷混合价杂多阴离子 [PMo12O40]4ˉ、3个水分子、2个乙醛分子和1个二甲基甲酰胺分子构成。

In-situ microscopic FTIR spectroelectrochemistry of ascorbic acid in poly(ethylene glycol)/LiClO4 electrolyte paste and in the presence of dispersed cobalt hexacyanoferrate microcrystalline powder

In-situ microscopic FTIR spectroelectrochemical technique(MFTIRs) was applied to studying the electrochemical oxidation of ascorbic acid(AA) in poly(ethylene glycol)(PEG) paste at a 100 mu m diameter Pt disk electrode. Using this technique, the catalytic ability of cobalt hexacyanoferrate(CoHCF) microcrystalline toward AA oxidation was also studied, it was found that the dispersed CoHCF powder in the PEG paste can generate well-shaped thin-layer cyclic voltammetric waves with the peak height proportional to the scan rate, corresponding to the Fe centered redox reactions. This oxidation step catalyzed the AA oxidation. Also, this pasted CoHCF powder generated well-resolved in-situ MFTIRs spectra, by which a chemical interaction between C = C bond of AA ring and CoHCF lattice was revealed. A corresponding surface docking mechanism for the catalytic reaction has been proposed.

聚酰胺、聚酯类工程塑料的增韧剂—官能化乙丙橡胶的研制

用2.5-二甲基-2.5-二特丁基过氧基己烷为引发剂,甲基丙烯酸环氧丙酯(GMA)、马来酸酐(MAH)和丙烯酸(AA)为接枝单体,对二元乙丙橡胶(EPR)和三元乙丙橡胶(EPDM)进行熔融接枝,接枝产物用富里叶红外光谱(FTIR)、~(13)C核磁共振波谱(NMR)等,进行了表征并用化学滴定方法对接枝率进行了测定。实验结果表明影响接枝率和凝胶含量的主要因素为乙丙橡胶的化学结构、引发剂和单体的用量、反应时间及温度等。

Photoluminescence study of Langmuir-Blodgett films of blend poly 3-(2-(5-chlorobenzotriazole)ethyl) thiophene

The multilayer Langmuir-Blodgett (LB) films of pr,ly 3-(2-(5-chlorobenzotriazole)ethyl) thiophene (PCBET) blended with amphibious arachidic acid (AA) were prepared and characterized. The photoluminescence intensity of the blend film was enhanced as the AA increased by a certain amount. The PCBET excimers were not formed in the blend LB films.

Thermal analysis of ethylene propylene copolymer-grafted-acrylic acid

The thermal properties of ethylene propylene copolymer-grafted-acrylic acid (EP-g-AA) were investigated by using differential scanning calorimetry (DSC). Compared with the ethylene propylene copolymer (EP), the peak values of the melting temperature (T-m) of the propylene sequences in the grafted EP changed a little, the crystallization temperature (T-c) increased about 8-12 degrees C, and the melting enthalpy (Delta H-m) increased about 4-6 J/g. The isothermal crystallization kinetics of grafted and ungrafted samples was carried out by DSC. Within the scope of the researched crystallization temperature, the Avrami exponent (n) of the ungrafted sample was 1.6-1.8, and that of grafted samples were all above 2, which indicated that the grafted monomer could become the crystal nuclei for the crystallization of propylene sequence. With increasing grafted monomer content, the crystallization rate of propylene sequence in grafted EP increased; it might be the result of rapid nucleation rate and crystal growth rate.

Study on Ordered Assembly of SnO2 Nonoparticles-Arachidic Acid Composite LB Films

The hydrosol of SnO2 nanoparticles (NP) have been prepared by colloid chemistry method. The composite LB monolayer and multilayer of SnO2 NP-AA have been obtained by LB technique at the gas-liquid interface of the hydrosol subphase. The structures of the monolayer and multilayer were characterized by IR, UV-Vis, small angle X-ray diffraction spectroscopy and TEM technique, The results indicate that the coverage of SnO2 NP at the composite monolayer's surface is high and the sites of SnO2 NP are similar. The multilayer has good periodic structure.

Melt functionalization of ethylene-propylene copolymer: Structural investigation

An ethylene-propylene copolymer (EPM) has been functionalized with acrylic acid (AA) by means of a radical-initiated melt process. Different degrees of grafting have been obtained by varying the overall composition of the reaction mixture. The influence of the grafting degree on the structure has been investigated by differential scanning calorimetry (DSC), Fourier-transform infrared analysis (FTIR), and wide-angle x-ray scattering (WAXS) techniques. The results of the structural investigations suggest that the grafting preferentially occurs onto the ethylene sequences of EPM. After acrylic acid was grafted onto EPM, the grafted AA acted as nucleation agent; it caused an increase of crystallization temperature of propylene sequences of EPM-g-AA.

SnO_2纳米粒子-花生酸LB膜有序组合体的研究

采用胶体化学法制备了稳定的SnO2纳米粒子（nanoparticleNP）水溶胶，用膜天平和原位布儒斯特角显微镜（BAM）考察了经典成膜材料花生酸（AA）在此水溶胶气-液界面的成膜性，并用LB膜技术在不同基底上制得了单层和多层AA-Sno2NP复合LB膜，通过TEM、小角X-ray、IR和UV-VIS光谱，进一步考察了该有序组装体的结构和周期性，以及组装作中Sno2纳米粒子的形貌、粒度分布和表面聚集状态.结果表明，用这种方法能够制得粒度分布均匀、农致密的Sno2纳米粒子复合LB膜，并且多层复合膜具有良好的周期性.

Properties of ethylene-propylene copolymer/PA-1010 blends using ethylene-propylene copolymer-graft-acrylic acid as a compatibilizing agent

The modification of ethylene-propylene copolymer (EP) has been accomplished by radical EP-graft-acrylic acid (EP-g-AA) has been used to obtain ternary PA/EP/EP-g-AA blends by melt mixing. Different blend morphologies were observed by scanning electron microscopy; the domain size of the EP-dispersed phase in the polyamide 1010 matrix of compatibilized blends decreased compared with that of uncompatibilized blends. It is found that EP-g-AA used as the third component has a profound effect on the mechanical properties of the resulting blends. This behavior has been attributed to serious chemical interactions taking place between the two components. Thermal analysis shows that some thermal properties of PA in compatibilized PA/EP/EP-g-AA changed because of chemical reactions taken place during the blending process. Wide angle x-ray diffraction measurements also confirmed this result. (C) 1996 John Wiley & Sons, Inc.