Controle flexível para conversores monofásicos conectados a sistemas elétricos distorcidos de baixa tensão

This paper presents a technique to add flexibility in the control of power electronic converters. The power converter can function as an active power filter, as a local power source interface or perform both functions i. e. mitigate current disturbances and inject power into the grid simultaneously, configuring it as a multifunctional device. The main goal is to extract the full capability of the grid connected power electronic converter to achieve maximum benefits. To achieve this goal, the orthogonal current decomposition of the Conservative Power Theory is used. Each orthogonal current component is weighted by means of different compensation factors (k_i), which are set instantaneously and independently, in any percentage by means of the load performance factors (λ_i), providing an online flexibility in relation to compensation objectives. Finally, to validate the effectiveness and performance the proposed approach, simulations and experimental results are presented.

Sequência didática como instrumento para a aprendizagem significativa do efeito fotoelétrico

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Análise numérica de uma geometria de coletor solar para sistemas de aquecimento de água

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Hidrólise enzimática de fibra de Caroá (Neoglaziovia variegata) visando à produção de nanocelulose e etanol

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Produção de etanol utilizando cascas de banana e de laranja por co-fermentação de Zymomonas mobilis e Pichia stipitis

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Levantamento de coeficientes de desempenho de refrigeradores domésticos associados a armazenador térmico

Pós-graduação em Engenharia Mecânica - FEB

Avaliação energética econômica do agroecossistema algodão: uma abordagem entre sistemas familiares de produção do Paraguai e do Brasil

The objective of this work was to evaluate the energy and economic efficiency indexes per unit of cotton agro-ecosystem area in family production systems of Paraguay and Brazil; and, to establish a relationship between the energy and economic. Typologies presented by the Program to Support Small Cotton Holdings (Paraguay), and by the National Program for Strengthening Family Agriculture (Brazil). Family systems of the two countries were identified; these are located from Paraguay (San Juan–CA) and from Brazil (Leme–SP). To construct the energy expenditure structure of the cotton agro-ecosystem, as well as to assess the economic efficiency, the mean values obtained were considered, when they presented similarities in production systems and they were within the typology proposed in this study. From the technical itinerary observed the Paraguayan agro-ecosystem depended (fossil fuel 56.76%) and industrial source (35.99%). Thus, the energy balance of the agricultural stage was established, which attained a value of 17,740.69 MJ ha-1; an energy efficiency of 5.28, and a cultural efficiency of 3.04. The Brazilian agro-ecosystem depended on energy from industrial source (insecticides 39.82%) and from fossil fuel (33.59%); it reached an energy balance of 19,547.88 MJ ha-1; an energy efficiency of 2.12, and a cultural efficiency index of 0.71. In the economic and energy indicator ratio, with regard to the months referring to the harvest time, that is to say, March, April, and May, the maximum economic efficiency indicator of paraguay was attained in the month of May (1,00), and from Brazil in the month of May (1,71). Both production systems analyzed were presented efficient, however, dependent of external circumstances and non-renewable energy sources.

Valiação energética e econômica do agroecossistema algodão: uma abordagem entre sistemas familiares de produção do Paraguai e Brasil

The objective of this work was to evaluate the energy and economic efficiency indexes per unit of cotton agro-ecosystem area in family production systems of Paraguay and Brazil; and, to establish a relationship between the energy and economic. Typologies presented by the Program to Support Small Cotton Holdings (Paraguay), and by the National Program for Strengthening Family Agriculture (Brazil). Family systems of the two countries were identified; these are located from Paraguay (San Juan–CA) and from Brazil (Leme–SP). To construct the energy expenditure structure of the cotton agro-ecosystem, as well as to assess the economic efficiency, the mean values obtained were considered, when they presented similarities in production systems and they were within the typology proposed in this study. From the technical itinerary observed the Paraguayan agro-ecosystem depended (fossil fuel 56.76%) and industrial source (35.99%). Thus, the energy balance of the agricultural stage was established, which attained a value of 17,740.69 MJ ha-1; an energy efficiency of 5.28, and a cultural efficiency of 3.04. The Brazilian agro-ecosystem depended on energy from industrial source (insecticides 39.82%) and from fossil fuel (33.59%); it reached an energy balance of 19,547.88 MJ ha-1; an energy efficiency of 2.12, and a cultural efficiency index of 0.71. In the economic and energy indicator ratio, with regard to the months referring to the harvest time, that is to say, March, April, and May, the maximum economic efficiency indicator of paraguay was attained in the month of May (1,00), and from Brazil in the month of May (1,71). Both production systems analyzed were presented efficient, however, dependent of external circumstances and non-renewable energy sources.

Um Modelo para Análise do Balanço e Eficiência Energética na Logística de Transporte Dutoviário para Exportação do Etanol.

This paper analyzed the energy flow of a route currently designed to transport ethanol from the Midwest region of Brazil for exportation, more precisely from the city of Aparecida do Taboado (MS) to the port of São Sebastiao (SP). The route studied a single modal combined into two pieces, duct - duct. The direct and indirect energy, involved in the operations were used to account for the inputs and outputs of energy from and into the system. The energy input and output were the variables, diesel fuel, lubricants, greases, indirect energy consumption of machinery and equipment, power consumption of labor, the energy consumption and energy consumption in depreciation and maintenance of roads. We found that this route has specific energy consumption of 0,14 MJ km-1 m-3 . The Net Energy Gain (GEl), the Energy Efficiency global (EEg) and Renewable Energy Balance (BEr), which were the energy indicators adopted in this study were obtained respectively: 1.585.958.977,00 MJ; 200,72 and 1.593.900.000,00MJ.

Modelagem da irradiação direta na incidência normal em Botucatu: aprendizado de máquina, estatístico e linke

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Conversor inversor integrado três estados buck-boost para geração distribuída, com operação conectada ou ilhada

Pós-graduação em Engenharia Elétrica - FEIS

Produção de amilases de Rhizopus microsporus var. oligosporus e hidrólise enzimática do bagaço de mandioca visando a produção de etanol por Saccharomyces cerevisiae

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Utilização de painéis solares fotovoltaicos no segmento residencial

In order to diversify the global and national energy matrix and reduce harmful impacts on the environment caused by the emission of polluting gases into the atmosphere, the use of clean and renewable energy sources is presented as a good alternative. This work discusses the use of photovoltaic solar energy, a source that presents such characteristics. The photovoltaic system under study is the type distributed connected to the grid, in the residential segment. It is informed of its use in the global and national levels. They are also present their characteristics, electrical and electronic circuits that make up the equipment required for its operation and the design of a system to be installed in a residence

Estudo de viabilidade técnica e econômica da utilização de geração diesel no horário de ponta

Given the current energy crisis experienced in our country with the lack of rain in some areas, the energy distributors were forced to resort to thermal power plants to complement their energy production; raising the cost of electricity generation, they have been forced to repass this value to the customers through the Tariff Flags. Concerned about a substantial increase in their electric bill, some consumers were forced to look for alternatives so that their results are not affected. The use of diesel generation at peak hours is a relatively simple and inexpensive alternative that has been widely used for several industrial, commercial and service customers. In this present work, we conducted a feasibility study of the use of diesel generators at peak hours in a medium-sized hospital, calculating the depreciation period for the investment through savings in electricity bills

Refuge Update – November/December 2008, Volume 5, Number 6

Table of Contents: Do-It-Yourself Project Makes Sparks, page 3 The Departments of the Interior and Energy spotlight San Andres Refuge’s innovative (and largely homemade) renewable energy program. In Oregon, a Refuge Teaches Teachers, page 5 Tualatin River National Wildlife Refuge’s ambitious environmental education program acquires a solid reputation. Focus on . . . International Conservation, pages 6-11 National resource managers around the world look to the Refuge System for on-the-scene advice and training. Taking Pride, page 16 A former refuge complex project leader in Texas and a super-volunteer in Georgia win 2008 Take Pride in America Awards.