Chemical and sensory characteristics of pulp and peel 'cajá-manga' (Spondias cytherea Sonn.) jelly

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Surface degradation of glass ceramics after exposure to acidulated phosphate fluoride

Objective: This study evaluated the surface degradation effect of acidulated phosphate fluoride (APF) gel exposure on the glassy matrix ceramics as a function of time. Material and methods: Disc-shaped ceramic specimens (N = 120, 10/per ceramic material) were prepared in stainless steel molds (inner diameter: 5 mm, height: 2 mm) using 6 dental ceramics: 3 indicated for ceramic-fused-to-metal (Vita Omega 900, Carmen and Vita Titankeramik), 2 for all-ceramic (Vitadur Alpha and Finesse (R) Low Fusing) and 1 for both types of restorations (IPS d. SIGN). The specimens were wet ground finished, ultrasonically cleaned and auto-glazed. All specimens were subjected to calculation of percentage of mass loss, surface roughness analysis and topographical description by scanning electron microscopy (SEM) before (0 min) and after exposure to 1.23 % APF gel for 4 min and 60 min representing short-and long-term etching effect, respectively. The data were analyzed using two-way ANOVA with repeated measures and Tukey` s test (alpha=0.05). Results: Significant effect of the type of the ceramics (p=0.0000, p=0.0031) and exposure time (p=0.0000) was observed in both surface roughness and percentage of mass loss values, respectively. The interaction factor between both parameters was also significant for both parameters (p=0.0904, p=0.0258). Both 4 min (0.44 +/- 0.1-0.81 +/- 0.2 mu m) and 60 min (0.66 +/- 0.1 - 1.04 +/- 0.3 mu m) APF gel exposure created significantly more surface roughness for all groups when compared to the control groups (0.33 +/- 0.2-0.68 +/- 0.2 mu m) (p<0.05). There were no significant differences in percentage of mass loss between the ceramics at 4 min (p>0.05) but at 60 min exposure, IPS d. SIGN showed the highest percentage of mass loss (0.1151 +/- 0.11). The mean surface roughness for Vita Titankeramik (0.84 +/- 0.2 mu m) and Finesse (R) Low Fusing (0.74.+/- 0.2 mu m) was significantly higher than those of the other ceramics (0.59 +/- 0.1 mu m - 0.49 +/- 0.1 mu m) and Vita Titankeramik (p<0.05) regardless of the exposure time. A positive correlation was found between surface roughness and percentage of mass loss for all ceramic materials [(r=0.518 (Vitadur Alpha), r=0.405 (Vita Omega 900), r=0.580 (Carmen), r=0.687 (IPS d. SIGN), r=0.442 (Finesse (R) Low Fusing), r=0.572 (Vita Titankeramik), Pearson's correlation coefficient)]. The qualitative SEM analysis showed evidence of corrosive attack on all of ceramics at varying degrees. Conclusions: The ceramics indicated for either metal-ceramic or all-ceramic restorations were all vulnerable to surface texture changes and mass loss after short-term and long-term APF gel exposure.

Effects of vacuum structure on neutron star

We study the equation of state for neutron matter using the Walecka model including quantum corrections for baryons and sigma mesons through a realignment of the vacuum. We next use this equation of state to calculate the radius, mass and other properties of rotating neutron star.

Potential symmetries and new solutions of a simplified model for reacting mixtures

In this paper, we investigate potential symmetries of a simplified model for reacting mixtures. We find new similarity reductions and wider class of solutions through this approach. Further, we explore an invertible mapping which linearizes the reacting mixture model.

Measurement of the p(p)over-bar -> t(t)over-bar + X production cross section at root s=1.96 TeV in the fully hadronic decay channel

A measurement of the top quark pair production cross section in proton antiproton collisions at an interaction energy of root s=1.96 TeV is presented. This analysis uses 405 +/- 25 pb(-1) of data collected with the D0 detector at the Fermilab Tevatron Collider. Fully hadronic t (t) over bar decays with final states of six or more jets are separated from the multijet background using secondary vertex tagging and a neural network. The t (t) over bar cross section is measured as sigma(t (t) over bar)=4.5(-1.9)(+2.0)(stat)(-1.1)(+1.4)(syst)+/- 0.3(lumi) pb for a top quark mass of m(t)=175 GeV/c(2).

Implications of groundwater weathered profile interactions to the mobilization of radionuclides

This study reports the nature and extent of open-system interaction between groundwater and a weathered profile developed in the high grade thorium and REE ore body in Morro do Ferro, Pocos de Caldas plateau. The radioelement mobility in the shallow oxidizing environment was considered by using chemical data in conjunction with U-234/U-238, Ra-226/Th-230, Th-230/U-234, Th-228/Th-232, Ra-228/Th-232 and Th-230/Ra-228 activity ratios (AR's) for borehole spoil and groundwater samples.Recharging groundwater from the studied borehole has low salinity values, with total dissolved solids content of 14.7 mg/l and total ionic strength of 0.00018. The ratio of the weight of dissolved radioelement per unit volume of solution to the weight of radioelement in solid phase per unit weight of solid phase showed that the radioelement solubility in the studied waters varied according to the following order: radium> uranium >thorium.U-234/U-238 AR's less than 1 were measured in solid phase and can justify the enhancement of U-234 in solution. Ra-226/Th-230 AR's greater than 1 and Th-230/U-234 AR'S less than 1 were evaluated between 20 and 27 m in depth, where a 2.1-m thick magnetite dike was intersected. These ratios could be justified by deposition of U and Ra associated with Fe-Mn oxides and kaolinite, where mineral saturation indices evaluated from the available data confirm this possibility. Covariations among disequilibria involving Th-228/(228) Ra and Ra-228/Th-232 AR's showed the preferential removal of Ra-228 relative to Tn isotopes, Th-228 and Th-232. The recent deposition of radium within the timescale of at least the last 35 years also is suggested. (C) 1998 Elsevier B.V. Ltd. All rights reserved.

INFLUENCE of GLYCEROL and ORNITHINE FEEDING on CLAVULANIC ACID PRODUCTION BY Streptomyces clavuligerus

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Enrichment of a continuous culture of Saccharomyces cerevisiae with the yeast Issatchenkia orientalis in the production of ethanol at increasing temperatures

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Electrochemical stability and corrosion resistance of Ti-Mo alloys for biomedical applications

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Kinetic parameters for thermal decomposition of supramolecular polymers derived from flunixin-meglumine adducts

Meglumine, (2R,3R,4R,5S)-6-methylaminohexane-1,2,3,4,5-pentol, is a carbohydrate derived from sorbitol in which the hydroxyl group in position one is replaced by a methylamine group. It forms binary adducts with substances having carboxyl groups, which have in common the presence of hydrogen bonding as the main force in the stabilization of these species. During melting, adducts of meglumine with flunixin (2-[[2-methyl-3-(trifluoromethyl)phenyl]amino]pyridine-3-carboxylic acid) polymerize or self-assemble in amorphous supramolecular structures with molecular weights around 2.0 x 10(5) kDa. DSC curves, in a first heating, show isomorphic transitions where the last one at 137 A degrees C for the flunixin-meglumine adduct originated the supramolecular amorphous polymers with glass transition around 49.5 A degrees C. The kinetic parameters for the thermal decomposition step of the polymers were determined by the Capela-Ribeiro non-linear isoconversional method. From data for the TG curves in nitrogen atmosphere and heating rates of 5, 10, 15, and 20 A degrees C min(-1), the E (alpha) and B (alpha) terms could be determined and, consequently, the pre-exponential factor, A(alpha), as well as the kinetic model, g(alpha).

Emprego de nebulizador pneumático de ICP-MS como câmara de diluição em sistemas de injeção em fluxo para determinações multielementares

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Emprego de compostos organometálicos mononucleares de paládio(II) na ativação de macrófagos peritoneais de camundongos

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

O registro escrito da nasalidade em crianças de educação infantil

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Influência do momento da cobrição, em relação à ovulação, na fertilidade e na ocorrência de morte embrionária precoce em eqüinos

Verificou-se a influência do momento da cobrição, em relação à ovulação, na fertilidade e na ocorrência de morte embrionária precoce (MEP) em 405 éguas da raça Puro Sangue Inglês, acompanhadas por 629 ciclos estrais. As éguas foram divididas em cinco grupos, de acordo com o momento da cobrição: grupo I, composto por 79 éguas cobertas entre 48 e 36 horas antes da ovulação; grupo II, com 102 éguas cobertas 36 a 24 horas antes da ovulação; grupo III, com 166 éguas cobertas 24 a 12 horas antes da ovulação; grupo IV, com 185 éguas cobertas até 12 horas antes da ovulação; e grupo V, formado por 97 éguas cobertas até 12 horas após a ovulação. As ovulações foram determinadas por palpação retal e ultra-sonografia, realizadas a cada 12 horas. O diagnóstico de gestação foi feito 14 dias após a cobrição com auxílio de ultra-sonografia. Novo exame foi realizado aos 60 dias para verificar ocorrência de MEP. Maiores índices de prenhez foram observados nos grupos III e IV (P<0,06). Verificou-se comportamento quadrático da taxa de prenhez em função do momento da cobrição aos 14 dias (R²= 91,0%; P<0,05) e aos 60 dias de prenhez (R²= 89,2%; P<0,05). Não foi observada diferença entre os grupos para MEP pelo qui-quadrado, mas a análise de regressão revelou comportamento quadrático da variável (R²= 92,4%; P<0,05). O melhor momento para cobrição foram as 24 horas que antecederam a ovulação.

Influence of fresh frozen plasma as a trigger factor for kidney dysfunction in cardiovascular surgery

OBJETIVO: A disfunção renal é uma complicação importante no cenário de pós-operatório de cirurgia cardiovascular. Como fatores de risco conhecidos no intraoperatório para o seu desenvolvimento destacam-se a circulação extracorpórea, a hemodiluição, drogas antifibrinolíticos e a transfusão sanguínea. O objetivo deste estudo é identificar os fatores de risco na transfusão de sangue e derivados para o desenvolvimento de disfunção renal em pacientes submetidos à cirurgia cardiovascular. MÉTODOS: Noventa e sete pacientes foram estudados e 84 foram analisados. A amostra foi estratificada em dois grupos, sendo que o incremento de 30% na creatinina sérica no pós-operatório foi considerado para o grupo com disfunção renal (n = 9; 10,71%). O grupo não disfunção renal foi caracterizado pela creatinina sérica, que permaneceu inferior a aumento de 30% no pós-operatório (n = 75; 89,28%). RESULTADOS: Foi observado que a transfusão de plasma fresco congelado no grupo não disfunção renal foi de 2,05 ± 0,78 unidades e 3,80 ± 2,16 unidades no grupo disfunção renal com P= 0,032. CONCLUSÃO: Foi possível associar, nesta série de pacientes, que a transfusão de plasma fresco congelado foi um fator de risco para disfunção renal pós-operatório de cirurgia cardiovascular.