稠油废水生物处理主要影响因素分析

有机聚合物和石油烃类物质是稠油废水中的主要污染物.应用辽河油田锦采污水处理厂稠油废水中筛选分离出的菌株B0501,分析其在稠油废水生物处理过程中对废水CODCr的去除作用,研究了不同温度,pH,水力停留时间以及添加氮、磷营养盐等条件下微生物对废水CODCr去除的影响.结果表明:稠油废水中投加的外源微生物B0501提高了废水中CODCr的去除率;接种后,废水在30℃,pH为7.5,水力停留时间为216 h,添加氮、磷营养盐(ρ(氮)/ρ(磷)为5.63)的条件下,废水CODCr去除率大幅度提高,其ρ(CODCr)满足国家污水综合排放一级标准(GB 8798-1996).经形态观察和生理生化反应鉴定,菌株B0501为液化金杆菌(Aureobaterium liquefaciens).

高吸水树脂的性能及其在农业上的应用

综述了新型化学抗旱节水材料?高吸水树脂的种类、吸水原理、主要的性能特征以及具体的使用方法。高吸水树脂可以通过抑制水分蒸发,增加土壤含水量以及改良土壤结构等方面,起到保水和促进作物生长发育以及提高产量的作用。指出了我国应在开发研制高吸水树脂保水剂的种类,提高释水性能和降低价格等方面加强研究。

几种酸性土壤供氮力测定方法的综合评价

模拟旱地条件进行黑麦草盆栽试验,对不同供氮力指标与黑麦草吸氮量相关性进行研究,结果表明,短期好气培养法测定的可矿化氮与吸氮量相关系数为0.820;氯化钾与氯化钙浸提的硝态氮与黑麦草吸氮量的相关系数分别为0.892和0.916,表明硝态氮含量作为土壤供氮能力指标具有一定的稳定性;微生物量氮的测定结果不够稳定且与黑麦草吸氮量相关性不高(r=0.751)。分析表明,氯仿熏蒸-浸提全氮与吸氮量的相关性最好,相关系数可达0.941,是一个较好的供氮力指标。

林下人参生理特性和生长与林内生态因子的关系

结合模拟试验，对林下人参的生理活动及生长过程与林内生态因子的关系进行 了观测研究．结果表明，林内光照、水分、温度等因子与林下人参生长的关系极为密切．一 般林内光照在中等条件下，即相对光照在１０～３５％左右．林分郁闭度约０．６～０．８，土壤含 水量在 ３５～４０％时人参生长最好；林下人参的物候进程及生长与温度的关系密切．林内 温度在５℃左右人参芽胞开始萌动，１５℃左右地上茎高生长进入速生期，６月上旬生长停 止．因此，人为调节各种生态因子在适宜的范围内有利于林下人参的生长．

论林带防风效应结构参数及其应用

以防护林带经营管理的实际出发 ,提出了林带新的结构参数———地上生物体积密度 ,阐明了该参数在林带削弱风速中的物理意义 ,分析了它与过去常用林带参数 (透风系数 ,疏透度 )的关系 ,并举例说明了它在生产中的实际应用

适量添加微量元素,促进科学合理施肥

<正>农业生产中使用化肥是从单元肥料开始,由于单一营养元素的肥料不能满足作物的需求,而要施用多种单元肥料,这使施肥工序操作麻烦且难以做到科学合理。因此,复混肥料的出现是农业发展需求的结果。

树木、林内、林冠上与森林区风速廓线研究(英文)

风速是森林生态系统研究中最为重要的变量之一,同时也是控制气流运输过程最基本的要素。由于树木生理指标和生长过程对风速的改变十分敏感,因此风速随高度的变化规律,即风速廓线的研究十分重要。一般认为,在裸地或林冠上的风廓线均呈对数规律变化,但是在单株树木和林分内风速随高度的变化则不呈对数规律。本文根据最近在海岸松林内风的研究结果,总结了针叶树种单株树木内、林分内和林冠上层以及海岸林区的风速廓线变化规律,其主要结论如下:1)单株针叶树树冠内的风速廓线呈指数形式分布,2)在林分内的风速廓线可用风的减弱系数来表示,3)[(\267\347)(\300\252\317\337\324\332\301\326\271\332\262\343)]上的分布可由风廓线参数(摩擦速度、粗糙长度、零平面位移)确定,4)在海岸林区,极端风速的分布可以使用了建筑上的风荷载模型进行预测。另外,本文提出了该研究领域尚需进一步探讨的问题,主要包括:1)风速廓线与树木特征及林分特征间的关系,2)利用简单的方法预测了风速廓线参数,3)风速廓线在树木生理、生态研究的作用、树木生长过程中风的微生态学效应以及森林生态和管理应用等方面。图4表1参60。

生成诊断公式的有限状态进程等价验证

分析有限状态进程互模拟等价判定技术,探讨了诊断公式的生成问题。给出了将有限状态进程转化为带标号的迁移系统,修改了Paige和Trajan求解最粗划分的算法,使其适用于带标号的迁移系统。给出生成Hennessy-Milner逻辑描述的诊断公式的算法,当两个进程不能互模拟时,产生两个诊断公式。算法的时间复杂度为O(mlogn),空间复杂度为O(m+n)。

A discrete square global grid system based on the parallels plane projection

Knowledge Innovation Project of Chinese Academy of Sciences [KZCX3-SW-347]; National Science Fund for Distinguished Young Scholar [40225004]

A discrete square global grid system based on the parallels plane projection

We developed a direct partitioning method to construct a seamless discrete global grid system (DGGS) with any resolution based on a two-dimensional projected plane and the earth ellipsoid. This DGGS is composed of congruent square grids over the projected plane and irregular ellipsoidal quadrilaterals on the ellipsoidal surface. A new equal area projection named the parallels plane (PP) projection derived from the expansion of the central meridian and parallels has been employed to perform the transformation between the planar squares and the corresponding ellipsoidal grids. The horizontal sides of the grids are parts of the parallel circles and the vertical sides are complex ellipsoidal curves, which can be obtained by the inverse expression of the PP projection. The partition strategies, transformation equations, geometric characteristics and distortions for this DGGS have been discussed. Our analysis proves that the DGGS is area-preserving while length distortions only occur on the vertical sides off the central meridian. Angular and length distortions positively correlate to the increase in latitudes and the spanning of longitudes away from a chosen central meridian. This direct partition only generates a small number of broken grids that can be treated individually.

Synthesis of Aromatic Oxide-Oxadiazoles Containing Pyridine Ring and Study on Their Spectral Properties

In order to explore new highly organic electroluminescent materials, six symmetrical aromatic oxide-oxadiazoles containing pyridine ring 4a similar to 4f were synthesized through cyclization of substituted benzoic acid (2) with 2,6-dihydrazide pyridine (3) by "one-pot" method in POCl3. Their structures were confirmed by MS, IR, H-1 NMR techniques and elemental analysis. The fluorescence spectra of the target compounds showed that the A,m ranged from 347 to 507 nm, and the maximum A,m were close to 384 nm, which showed that these compounds have good fluorescence with strong fluorescence intensity. When the 5-Br group was introduced into the aromatic ring (4e and 4f), the fluorescent emission wavelength took place Einstein shift, and the fluorescent intensity decreased a little. Using quinine bisulphate as a reference, the fluorescence quantum yields were all tested, and the introduction of 5-Br group had no visible effect on fluorescence quantum yield.

Facile sonochemical synthesis and photoluminescent properties of lanthanide orthophosphate nanoparticles

Uniform lanthanide orthophosphate LnPO(4) (Ln = La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho) nanoparticles have been systematically synthesized via a facile, fast, efficient ultrasonic irradiation of inorganic salt aqueous solution under ambient conditions without any surfactant or template. X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), selected area electron diffraction (SAED), photoluminescence (PL) spectra as well as kinetic decays were employed to characterize the samples. The SEM and the TEM images show that the hexagonal structured lanthanide orthophosphate LnPO(4) (Ln = La, Ce, Pr, Nd. Sm, Eu, Gd) products have nanorod bundles morphology, while the tetragonal LnPO(4) (Ln = Tb, Dy, Ho) samples prepared under the same experimental conditions are composed of nanoparticles. HRTEM micrographs and SAED results prove that these nanostructures are polycrystalline in nature.

Surface plasmon resonance and electrochemistry for detection of small molecules using catalyzed deposition of metal ions on gold substrate

Small molecules are difficult to detect by conventional surface plasmon resonance (SPR) spectroscopy due to the fact that the changes in the refractive index resulted from the binding process of small biomolecules are quite small. Here, we report a simple and effective method to detect small biomolecule using SPR spectroscopy and electrochemistry by catalyzed deposition of metal ions on SPR gold film. As an example, the ascorbic acid-mediated deposition of Ag on gold film was monitored by in situ SPR spectrum. The deposition of Ag atom on gold film resulted in an obvious decrease of depth in SPR angular scan curves of reflectance intensity and minimum reflectivity angle. The depth change of the SPR reflectance intensity and minimum reflectivity angle curves mainly relied on the amount of Ag atom deposited on gold film that can be controlled by the concentration of ascorbic acid. By monitoring the deposition of Ag atom on gold film, ascorbic acid was detected in the concentration range of 2 x 10(-5) M to 1 x 10(-3) M. After each of detections, the SPR sensor surface was completely regenerated by a potential step that stripped off the Ag atom. Furthermore, the regeneration process of the sensor surface provides the feasibility for detecting the concentration of ascorbic acid by electrochemical method.

Preparation and transport properties of a bulk icosahedral quasicrystalline Ti45Zr35Ni17Cu3 alloy

A bulk alloy which consists of the single icosahedral quasicrystalline phase (I-phase) in Ti45Zr35Ni17CU3 alloy has been fabricated by mechanical alloying and subsequent pulse discharge sintering technique. Crystallographic structure analyses show that the bulk alloy is an I-phase. The transport properties of the bulk alloy are examined, and the results show that the room-temperature thermal conductivity is 5.347 W K-(1) m(-1), and the electrical conductivity decreases with increasing the temperature from 300 to 450K. The Seebeck coefficient is negative at the temperature range from 300 to 360K, and changes to positive from 370 to 450K. Hall effect measurements indicate the bulk I-phase alloy has a high carrier concentration. The specific heat capacity increases when the temperature increases from 280 to 324 K.