不同渗透压的稀释液对猕猴精子低温冷冻保存的影响

以稀释液TTE (382 mOsm/ kg) 为对照, 研究了5 种渗透压(688 、389 、329 、166 、43 mOsm/ kg) 的TEST 稀释液(TEST、mTEST1、mTEST2、mTEST3、mTEST4) 在冷冻过程中对猕猴精子功能的影响。精液一 步稀释于含甘油的防冻液中, 甘油的终浓度为5 % (v/ v) 。在冷冻前后分别检测精子的运动度和质膜完整性, 后者用Hoechst 33342 和碘化丙锭双色标记流式细胞术分析。结果表明: 冷冻之前, 与鲜精相比, 用TEST 和 mTEST4 稀释的精子运动度和质膜完整性显著降低( P < 01001) , 其余组中除mTEST2 稀释的精子质膜完整性显 著降低( P < 0105) 外, 精子运动度无差异; 冷冻复苏后, TTE、mTEST3 和mTEST1 冻存精子的运动度和质膜 完整性最高, 其次是mTEST2 , TEST和mTEST4 冷冻效果最差( P < 0105) 。提示等渗、适当高渗或低渗的稀释 液适合猕猴精子的冷冻保存; 对精子产生高渗毒害作用是导致猕猴精子用TEST 冷冻存活率低的主要原因。

云南新平哀牢山夜间捕获鸟类的多样性

2007-09-05-2007-11-05和2008-09-03-2008-11-07期间,在云南省新平县哀牢山金山丫口用灯光诱捕对秋季夜间迁徙鸟类组成进行了调查.共捕获鸟类129种,7943只,分属于14日23科.雀形目鸟类为网捕主要鸟类,占总网捕数量的58.9%.其中红尾伯劳(Lanius cristatus)、小杜鹃(Cuculus poliocephalus)和红喉歌鸲(Luscinia calliope)3种是该地夜间网捕优势种鸟类,三者数量皆超过网捕岛类总数的5%.每天夜间20:00-22:00和次日凌晨04:00-4)6:00是捕获鸟类数最的高峰时段.网捕期间,早期Shannon-Wiener指数和Pielou指数最低,优势指数C最高;中期Shannon-Wiener指数和Pielou指数最高,优势度指数C最低.2008与2007年相比,优势指数C和G-F指数较低.但Shannon-Wiener指数和Pielou指数较高.云南省不同"打雀山"仪问捕获鸟类的种类和数量存在差异.地理和气候可能是造成这些差异的主要因素.

独龙江中下游流域的鱼类区系

独龙江流域位于云南省的西北部,北与青藏高原相连,西与缅甸毗邻.中国科学院昆明动物研究所于2004年10月~11月对该水域鱼类资源进行了具体调查,共计采集到鱼类标本883号,分别属于鲤形目、鲇形目;裂腹鱼亚科、野鲮亚科、鮡科;共2目、3科(亚科)、6属、7种.对独龙江鱼类区系与其相邻水系的鱼类区系进行比较分析,认为独龙江水系的鱼类区系与怒江水系的鱼类区系有着更近的渊缘关系.

New insights into the karyotypic relationships of Chinese muntjac (Muntiacus reevesi), forest musk deer (Moschus berezovskii) and gayal (Bos frontalis)

To investigate the karyotypic relationships between Chinese muntjac (Muntiacus reevesi), forest musk deer (Moschus berezovskii) and gayal (Bos frontalis), a complete set of Chinese muntjac chromosome-specific painting probes has been assigned to G-banded chromosomes of these three species. Sixteen autosomal probes (i.e. 6-10, 12-22) of the Chinese muntjac each delineated one pair of conserved segments in the forest musk deer and gayal, respectively. The remaining six autosomal probes (1-5, and 11) each delineated two to five pairs of conserved segments. In total, the 22 autosomal painting probes of Chinese muntjac delineated 33 and 34 conserved chromosomal segments in the genomes of forest musk deer and gayal, respectively. The combined analysis of comparative chromosome painting and G-band comparison reveals that most interspecific homologous segments show a high degree of conservation in G-banding patterns. Eleven chromosome fissions and five chromosome fusions differentiate the karyotypes of Chinese muntjac and forest musk deer; twelve chromosome fissions and six fusions are required to convert the Chinese muntjac karyotype to that of gayal; one chromosome fission and one fusion separate the forest musk deer and gayal. The musk deer has retained a highly conserved karyotype that closely resembles the proposed ancestral pecoran karyotype but shares none of the rearrangements characteristic for the Cervidae and Bovidae. Our results substantiate that chromosomes 1-5 and 11 of Chinese muntjac originated through exclusive centromere-to-telomere fusions of ancestral acrocentric chromosomes. Copyright (C) 2005 S. Karger AG, Basel.

蛇ju属一新亚种记述

通过对采自云南程海和珠江、闽江、长江、辽河、松花江等水系蛇ju标本的形态、度量特征进行仔细分析和比较，认为蛇ju程海种群是蛇ju的1个新亚种，命名为程海蛇ju（Saurogobio dabryi chenghaiensis）。程海蛇ju的特征为：吻皮发达，盖过上唇；上下唇布满发达的乳突；体及尾柄极细长，体高为体长的12.7％-15.0％，尾柄高为体长的5.5％-6.1％、为尾柄长的31.8％-39.1％；沿体侧中轴自鳃孔上方至尾鳍基具一浅色暗纹，其上布有6-11个大型棒状黑斑（黑斑长为宽的2-4倍）；肛门位于腹鳍长度的中点之后；尾鳍最长鳍条为其最短鳍条的2倍以上；仅分布于云南程海。

A feed for seabass

One of the major constraints in seabass (Lates calcarifer) culture is feed supply. Details are given of work conducted at AQD regarding the formulation of a 'standard' feed suitable for carnivorous species like the seabass and groupers. Diet formulae for seabass grow-out and for larval rearing are given.

External-cavity mode-locked quantum-dot laser diodes for low repetition rate, sub-picosecond pulse generation

This paper presents an investigation of the mode-locking performance of a two-section external-cavity mode-locked InGaAs quantum-dot laser diode, focusing on repetition rate, pulse duration and pulse energy. The lowest repetition rate to-date of any passively mode-locked semiconductor laser diode is demonstrated (310 MHz) and a restriction on the pulse energy (at 0.4 pJ) for the shortest pulse durations is identified. Fundamental mode-locking from 310 MHz to 1.1 GHz was investigated, and harmonic mode-locking was achieved up to a repetition rate of 4.4 GHz. Fourier transform limited subpicosecond pulse generation was realized through implementation of an intra-cavity glass etalon, and pulse durations from 930fs to 8.3ps were demonstrated for a repetition rate of 1 GHz. For all investigations, mode-locking with the shortest pulse durations yielded constant pulse energies of ∼0.4 pJ, revealing an independence of the pulse energy on all the mode-locking parameters investigated (cavity configuration, driving conditions, pulse duration, repetition rate, and output power). © 2011 IEEE.

Calculation and measurement of the magnetostriction of multilayered composites

A new theoretical model that predicts the magnetostriction of multilayered composites has been developed. The model takes into account the shear stress between the composite layers and consequently predicts a non-uniform strain along their thickness. The model has been experimentally validated by producing composites formed from three materials with different magnetostrains and mechanical properties, and controlled layer thicknesses in the order of micrometers. Deformations of several ppm, up to 7.5% of the saturation magnetostrain were measured between the edge and the centre of such composites. © 2006 Elsevier B.V. All rights reserved.

Community-led resettlement: From a flood affected slum to a new society in Pune, India

This paper describes the resettlement process of a community devastated by annual floods, to newly constructed housing in Pune, India. The relocation from Kamgar Putala slum to a housing society at Hadapsar was organized by a community-led NGO partnership in 2004. The housing development was coordinated by the local NGO Shelter Associates with significant community participation. The housing has been revisited in 2010 to evaluate the sustainability of the resettlement project’s delivery model via stakeholder perception. The process of organizing for resettlement after natural disaster is described along with the implementation and evaluation of the new housing nearly six years after initial occupation. The strong partnership approach overcame a series of political and financial hurdles at various stages of the relocation project. The story of resettling Kamgar Putala is detailed alongside an outline of the current political climate for an alternative slum-upgrading policy in India and Pune. The advantages of an empowered community supported by an influential local NGO demonstrate a commendable team effort which has tackled the threat of floods. The paper highlights the merits of a community-led partnership approach to housing development for achieving sustainable urban development as well as the alleviation of poverty in a developing context.

Optimal design of Functionally Graded Materials using a procedural model and Particle Swarm Optimization

A new method for the optimal design of Functionally Graded Materials (FGM) is proposed in this paper. Instead of using the widely used explicit functional models, a feature tree based procedural model is proposed to represent generic material heterogeneities. A procedural model of this sort allows more than one explicit function to be incorporated to describe versatile material gradations and the material composition at a given location is no longer computed by simple evaluation of an analytic function, but obtained by execution of customizable procedures. This enables generic and diverse types of material variations to be represented, and most importantly, by a reasonably small number of design variables. The descriptive flexibility in the material heterogeneity formulation as well as the low dimensionality of the design vectors help facilitate the optimal design of functionally graded materials. Using the nature-inspired Particle Swarm Optimization (PSO) method, functionally graded materials with generic distributions can be efficiently optimized. We demonstrate, for the first time, that a PSO based optimizer outperforms classical mathematical programming based methods, such as active set and trust region algorithms, in the optimal design of functionally graded materials. The underlying reason for this performance boost is also elucidated with the help of benchmarked examples. © 2011 Elsevier Ltd. All rights reserved.