Verkkokurssilla : Opiskelijoiden kokemuksia toiminnasta yhteisöllisessä oppimisprosessissa Fle2-ympäristössä ja kokemusten näkyminen toimintaan osallistumisessa

The study examines one case of students' experiences from the activity in a collaborative learning process in a networked learning environment, and explores whether or not the experiences explain the participation or lack of participation in the activities. As a research task the students' experiences in the database of the networked learning environment, participating in its construction, and the ways of working needed to build the database, were examined. To contrast the students' experiences, their actual participation in the building of the database was clarified. Based on actual participation, groups more active and more passive than average were separated, and their experiences were compared to each other. The research material was collected from the course Cognitive and Creative Processes, which was offered to studentsof the Department of Textile Teacher Education in University of Helsinki, and students of the Departments of Teacher Education Units giving textile education in Turku, Rauma and Savonlinna in the beginning of 2001. In this course, creativity was examined from a psychological and sosiocultural context with the aim of realizing a collaborative progressive inquiry process. The course was held in a network-based Future Learning Environment (Fle 2) except for the starting lecture and training the use of the learning environment. This study analyzed the learning diaries that the students had sent to the tutor once a week for four weeks, and the final thoughts written into the database of the learning environment. Content analysis was applied as the research method. The case was enriched from another point of view by examining the messages the students had written into the learning environment with the social network analysis. The theoretical base of the study looks at the research of computer-supported collaborative learning, the conceptions of learning as a process of participation and knowledge building, and the possibilities and limitations of network-based learning environments. The research results show, that both using the network-based learning environment and collaborative ways of studying were new to the students. The students were positively surprised by the feedback and support provided by the community. On the other hand, they also experienced problems with facelessness and managing the information in the learning environment. The active students seemed to be more ready for a progressive inquiry process. It can be seen from their attitudes and actions that they have strived to participate actively and invested into the process both from their own and the community's point of view. The more passive students reported their actions to get credits and they had a harder time of perceiving the thoughts presented in the net as common progression. When arranging similar courses in the future, attention should be paid to how to get the students to act in ways necessary for knowledge building, and different from more traditional ways of studying. The difficulties of students used to traditional studying methods to adapt to collaborative knowledge building were evident on the course Cognitive and Creative Processes. Keywords: computer supported collaborative learning, knowledge building, progressive Inquiry, participation

Tekstiilityötä ja matematiikkaa yhdistävän oppimateriaalin käyttökelpoisuus perusopetuksen yläluokilla

In this study the researcher wanted to show the observed connection of mathematics and textile work. To carry this out the researcher designed a textbook by herself for the upper secondary school in Tietoteollisuuden Naiset TiNA project at Helsinki University of Technology (URL:http://tina.tkk.fi/). The assignments were designed as additional teaching material to enhance and reinforce female students confidence in mathematics and in the management of their textile work. The research strategy applied action research, out of which two cycles two have been carried out. The first cycle consists of establishing the textbook and in the second cycle its usability is investigated. The third cycle is not included in this report. In the second cycle of the action research the data was collected from 15 teachers, five textile teachers, four mathematics teachers and six teachers of both subjects. They all got familiar with the textbook assignments and answered a questionnaire on the basis of their own teaching experience. The questionnaire was established by applying the theories of usability and teaching material assessment study. The data consisted of qualitative and quantitative information, which was analysed by content analysis with computer assisted table program to either qualitative or statistical description. According to the research results, the textbook assignments seamed to be applied better to mathematics lessons than textile work. The assignments pointed out, however, the clear interconnectedness of textile work and mathematics. Most of the assignments could be applied as such or as applications in the upper secondary school textile work and mathematics lessons. The textbook assignments were also applicable in different stages of the teaching process, e.g. as introduction, repetition or to support individual work or as group projects. In principle the textbook assignments were in well placed and designed in the correct level of difficulty. Negative findings concerned some too difficult assignments, lack of pupil motivation and unfamiliar form of task for the teacher. More clarity for some assignments was wished for and there was especially expressed a need for easy tasks and assignments in geometry. Assignments leading to the independent thinking of the pupil were additionally asked for. Two important improvements concerning the textbook attainability would be to get the assignments in html format over the Internet and to add a handicraft reference book.

Can the direct measurement of the load applied on the residuum of individuals with transfemoral amputation fitted with bone-anchored prosthesis help to improve the rehabilitation program?

To strive to improve the rehabilitation program of individuals with transfemoral amputation fitted with bone-anchored prosthesis based on data from direct measurements of the load applied on the residuum we first of all need to understand the load applied on the fixation. Therefore the load applied on the residuum was first directly measured during standardized activities of daily living such as straight line level walking, ascending and descending stairs and a ramp and walking around a circle. From measuring the load in standardized activities of daily living the load was also measured during different phases of the rehabilitation program such as during walking with walking aids and during load bearing exercises.[1-15] The rehabilitation program for individuals with a transfemoral amputation fitted with an OPRA implant relies on a combination of dynamic and static load bearing exercises.[16-20] This presentation will focus on the study of a set of experimental static load bearing exercises. [1] A group of eleven individuals with unilateral transfemoral amputation fitted with an OPRA implant participated in this study. The load on the implant during the static load bearing exercises was measured using a portable system including a commercial transducer embedded in a short pylon, a laptop and a customized software package. This apparatus was previously shown effective in a proof-of-concept study published by Prof. Frossard. [1-9] The analysis of the static load bearing exercises included an analysis of the reliability as well as the loading compliance. The analysis of the loading reliability showed a high reliability between the loading sessions indicating a correct repetition of the LBE by the participants. [1, 5] The analysis of the loading compliance showed a significant lack of axial compliance leading to a systematic underloading of the long axis of the implant during the proposed experimental static LBE.

ACIAR Strengthening the Fiji Papaya Industry

Strengthening the Fiji Papaya Industry through applied research and information dissemination.

Multi-time scale analysis applied to long time simulation of power systems

The results are presented of applying multi-time scale analysis using the singular perturbation technique for long time simulation of power system problems. A linear system represented in state-space form can be decoupled into slow and fast subsystems. These subsystems can be simulated with different time steps and then recombined to obtain the system response. Simulation results with a two-time scale analysis of a power system show a large saving in computational costs.

Analysis of the distribution of the number of bidders in construction contract auctions

The number of bidders, N, involved in a construction procurement auction is known to have an important effect on the value of the lowest bid and the mark up applied by bidders. In practice, for example, it is important for a bidder to have a good estimate of N when bidding for a current contract. One approach, instigated by Friedman in 1956, is to make such an estimate by statistical analysis and modelling. Since then, however, finding a suitable model for N has been an enduring problem for researchers and, despite intensive research activity in the subsequent thirty years little progress has been made - due principally to the absence of new ideas and perspectives. This paper resumes the debate by checking old assumptions, providing new evidence relating to concomitant variables and proposing a new model. In doing this and in order to assure universality, a novel approach is developed and tested by using a unique set of twelve construction tender databases from four continents. This shows the new model provides a significant advancement on previous versions. Several new research questions are also posed and other approaches identified for future study.

Gene to Phenotype Integrative Science and Modelling Applied to Pioneer elite

This project aims to use simulatiion modelling to improve our understanding of the genetics and physiology of complex traits with a view to increasing the rate of genetic gain in plant breeding programs.

Continued delivery of applied solutions to weed issues in central Queensland

Developing best practices in Central Queensland to (a) manage difficult to control weeds; (b) improve herbicide efficacy under adverse conditions, and (c) manage weeds in wide-row crop systems.

Maximising profitability with limited water in cotton farming systems

Diminishing water supply, changing weather patterns and pressure to enhance environmental flows are making it imperative to optimise water use efficiency (WUE) on cotton/grain farming systems. Growers are looking for better strategies to make the best use of limited water, but it is still not clear how to best use the available water at farm and field scale. This research project investigated the impact of management strategies to deal with limited water supplies on the yield and quality of irrigated cotton and wheat. The objectives were: (1) to develop irrigation management guidelines for the main irrigated crops on the Darling Downs for full- and deficitirrigation scenarios, taking into account the critical factors that affect irrigation decisions at the local level, (2) to quantify the evapotranspiration (ET) of Bollgard II cotton and wheat and its relationship to yield and quality under full- and deficit-irrigation scenarios, and (3) to increase industry awareness and education of farming systems practises for optimised economic water use efficiency.Objective (1) was addressed by (A) collaborating with ASPRU to develop the APSFarm model within APSIM to be able to perform multi-paddock simulations. APSFarm was then tested by conducting a case study at a farm near Dalby, and (B) conducting semi-structured interviews with individual farmers and crop consultants on the Darling Downs to document the strategies they are using to deal with limited water. Objective (2) was addressed by (A) building and installing 12 large (1 m x 1m x 1.5 m) weighing lysimeters to measure crop evapotranspiration. The lysimeters were installed at the Agri-Science Queensland research station at Kingsthorpe in November 2008, (B) conducting field experiments to measure crop evapotranspiration and crop development under four irrigation treatments, including dryland, deficit-irrigation, and full irrigation. Field experiments were conducted with cotton in 2007-08 and 2008-09, and with wheat in 2008 and 2009, and (C) collaborating with USQ on a PhD thesis to quantify the impact of crop stress on crop evapotranspiration and canopy temperature. Glasshouse experiments were conducted with wheat in 2008 and with cotton in 2008-09. Objective (3) was addressed by (A) conducting a field day at Kingsthorpe in 2009, which was attended by 80 participants, (B) presenting information in conferences in Australia and overseas, (D) presenting information at farmers meeting, (E) making presentations to crop consultants, and (F) preparing extension publications.As part of this project we contributed to the development of APSfarm, which has been successfully applied to evaluate the feasibility of practices at the whole-farm scale. From growers and crop consultants interviews we learned that there is a great variety of strategies, at different scales, that they are using to deal with limited water situation. These strategies will be summarised in the "e;Limited Water Guidelines for the Darling Downs"e; that we are currently preparing. As a result of this project, we now have a state-of-the-art lysimeter research facility (23 large weighing lysimeters) to be able to conduct replicated experiments to investigate daily water use of a variety of crops under different irrigation regimes and under different environments. Under this project, a series of field and glasshouse experiments were conducted with cotton and wheat, investigating aspects like: (A) quantification of daily and seasonal crop water use under nonstressed and stressed conditions, (B) impact of row configuration on crop water use, (C) impact of water stress on yield, evapotranspiration, crop vegetative and reproductive development, soil water extraction pattern, yield and yield quality. The information obtained from this project is now being used to develop web-based tools to help growers make planning and day-to-day irrigation decisions.

Objective `Safe' Grazing Capacities for South-West Queensland Australia: Model Application and Evaluation

This paper describes the employment of two experienced graziers as consultants to apply and evaluate a model for calculating 'safe' long-term grazing capacities of individual properties. The model was based on ecological principles and entailed estimates of average annual forage grown (kglha) on the different land systems on each property and the calculation of the number of livestock (dry sheep equivalents, DSE) required to 'safely' utilise this forage. The grazier consultants applied and evaluated the 'safe' grazing capacity model on 20 properties of their choosing. For evaluation, model results were compared with; (a) the Department of Lands rated carrying capacities for those properties and (b) the grazing capacity assessed independently by the owners of those properties. For the 20 properties, the average 'safe' grazing capacity calculated by the model (21.0 DSE/kmZ) was 8% lighter than the average of the owner assessed capacities (22.7 DSE/kmZ), which in tum was 37% lighter than the average of the pre-1989 Department of Lands rated carrying capacity (31.0 DSE/kmZ). The grazing land management and administrative implications of these results and the role graziers played as consultants are discussed.

Using wheat flour in the production of organic banana prawns

Banana prawn (Fenneropenaeus merguiensis) juveniles (1-2 g) were compared for survival, growth and condition after feeding in tanks over one month with several simple diets based on organically certified whole wheat flour. All feeds were applied once per day at 6% of the starting body weight, and produced high survival (>94%). A commercial Australian prawn feed used as the control diet produced the highest (P<0.05) growth (101% weight gain) and condition measured as the length of antennae (13.2 cm). The unfed control had significantly (P<0.05) lower survival (56%), and resulted in a weight loss (3.1%) and the shortest antennae (9.4 cm). Adding free flour to tanks produced lower (P<0.05) growth (6.9%) and shorter (P<0.05) antennae (10.3 cm) than adding pelletised flour with low levels (dry weight) of additional nutritional substances and feed attractants (chicken’s whole egg: 1.5%, polychaete slurry: 1.1% and 6.8%, molasses: 4.2%). Rolling the flour into a dough ball also appeared to marginally improve its direct utilisation by the prawns. These results are considered within the context of appropriate nutrition for Penaeids and successfully producing certified organic prawns in Australia.

Phosphonate applied as a pre-plant dip controls Phytophthora cinnamomi root and heart rot in susceptible pineapple hybrids.

The effectiveness of pre-plant dips of crowns in potassium phosphonate and phosphorous acid was investigated in a systematic manner to develop an effective strategy for the control of root and heart rot diseases caused by Phytophthora cinnamomi in the pineapple hybrids 'MD2' and '73-50' and cultivar Smooth Cayenne. Our results clearly indicate that a high volume spray at planting was much less effective when compared to a pre-plant dip. 'Smooth Cayenne' was found to be more resistant to heart rot than 'MD2' and '73-50', and 'Smooth Cayenne' to be more responsive to treatment with potassium phosphonate. Based on cumulative heart rot incidence over time 'MD2' was more susceptible to heart rot than '73-50' and was more responsive to an application of phosphorous acid. The highest levels of phosphonate in roots were reached one month after planting and levels declined during the next two months. Pre-plant dipping of crowns prior to planting is highly effective to control root and heart rot in the first few months but is not sufficient to maintain health of the mother plant root system up until plant crop harvest when weather conditions continue to favour infection.

Commercial products from bio-active extractives in cypress milling residues.

Extractive components obtained from milling residues of white cypress were studied for chemical identity and bioactivity with a view to developing a commercial use for these components, thus increasing the value of the residues and improving the economics of cypress sawn wood production. Extracts obtained by solvent or steam extraction techniques from cypress sawdust were each fractionated by a range of techniques into groups of similar compounds. Crude extracts and fractions were screened against a range of agricultural pests and diseases, including two fungi, subterranean termites, fruit spotting bugs, two-spotted mites, thrips, heliothis, banana scab moths, silverleaf whiteflies, cattle tick adults and larvae, and ruminant gastrointestinal nematodes. Additional screening was undertaken where encouraging results were achieved, for two-spotted mites, thrips, silverleaf whiteflies, cattle tick adults and ruminant gastrointestinal nematodes. After considering degrees of efficacy against, and economic importance of, the agricultural pests, and likely production costs of extracts and fractions, the crude extract (oil) produced by steam distillation was chosen for further study against silverleaf whitefly. A useful degree of control was achievable when this oil was applied to tomato or eggplant at 0.1%, with much less harmful effects on a beneficial insect. Activity of the oil against silverleaf whitefly was undiminished 3.5 years after it was generated. There was little benefit from supplementing the extract with co-formulated paraffinic oil. From the steam distilled oil, fifty-five compounds were characterised, thirty-five compounds representing 92.478 % of the oil, with guaiol (20.8%) and citronellic acid (15.9%) most abundant. These two compounds, and a group of oxygenated compounds containing bulnesol and a range of eudesmols, were found to account for most of the activity against silverleaf whitefly. This application was recommended for first progression to commercialisation.

A case study on the economics of overhead irrigation in the lower Burdekin

Converting from an existing irrigation system is often seen as high risk by the land owner. The significant financial investment and the long period over which the investment runs is also complicated by the uncertainty associated with long term input costs (such as energy), crop production, and the continually evolving natural resource management rules and policy. Irrigation plays a pivotal part in the Burdekin sugarcane farming system. At present the use of furrow irrigation is by far the most common form due to the ease of use, relatively low operating cost and well established infrastructure currently in place. The Mulgrave Area Farmer Integrated Action (MAFIA) grower group, located near Clare in the lower Burdekin region, identified the need to learn about sustainable farming systems with a focus on the environment, social and economic implications. In early 2007, Hesp Faming established a site to investigate the use of overhead irrigation as an alternative to furrow irrigation and its integration with new farming system practices, including Green Cane Trash Blanketing (GCTB). Although significant environmental and social benefits exist, the preliminary investment analysis indicates that the Overhead Low Pressure (OHLP) irrigation system is not adding financial value to the Hesp Farming business. A combination of high capital costs and other offsetting factors resulted in the benefits not being fully realised. A different outcome is achieved if Hesp Farming is able to realise value on the water saved, with both OHLP irrigation systems displaying a positive NPV. This case study provides a framework to further investigate the economics of OHLP irrigation in sugarcane and it is anticipated that with additional data a more definitive outcome will be developed in the future.

Relocation of Intensive Agriculture to Northern Australia: The Case of the Rice Industry

Development of new agricultural industries in northern Australia is seen as a way to provide food security in the face of reduced water availability in existing regions in the south. This report aims to identify some of the possible economic consequences of developing a rice industry in the Burdekin region, while there is a reduction of output in the Riverina. Annual rice production in the Riverina peaked at 1.7 M tonnes, but the long-term outlook, given climate change impacts on that region and government water buy-backs, is more likely to be less than 800,000 tonnes. Growers are highly efficient water users by international standards, but the ability to offset an anticipated reduction in water availability through further efficiency gains is limited. In recent years growers in the Riverina have diversified their farms to a greater extent and secondary production systems include beef, sheep and wheat. Production in north Queensland is in its infancy, but a potentially suitable farming system has been developed by including rice within the sugarcane system without competition and in fact contributing to the production of sugar by increasing yields and controlling weeds. The economic outcomes are estimated a large scale, dynamic, computable general equilibrium (CGE) model of the world economy (Tasman Global), scaled down to regional level. CGE models mimic the workings of the economy through a system of interdependent behavioural and accounting equations which are linked to an input-output database. When an economic shock or change is applied to a model, each of the markets adjusts according to the set of behavioural parameters which are underpinned by economic theory. In this study the model is driven by reducing production in the Riverina in accordance with relationships found between water availability and the production of rice and replacement by other crops and by increasing ride production in the Burdekin. Three scenarios were considered: • Scenario 1: Rice is grown using the fallow period between the last ratoon crop of sugarcane and the new planting. In this scenario there is no competition between rice and sugarcane • Scenario 2: Rice displaces sugarcane production • Scenario 3: Rice is grown on additional land and does not compete with sugarcane. Two time periods were used, 2030 and 2070, which are the conventional time points to consider climate change impacts. Under scenario 1, real economic output declines in the Riverina by $45 million in 2030 and by $139 million in 2070. This is only partially offset by the increased real economic output in the Burdekin of $35 million and $131 million respectively.