Análise de tensões em materiais sólidos de espumas de poliuretano rígidas sob furação

Em diferentes áreas da medicina existem processos cirúrgicos que envolvem a furação de tecido ósseo, dependendo o seu sucesso da conjugação de diversos parâmetros. A previsão e o controlo dos parâmetros envolvidos são fundamentais para a redução do dano no tecido ósseo. Este trabalho de investigação tem como objetivo avaliar o estado de tensão gerado durante o processo de furação utilizando materiais sólidos de espumas de poliuretano rígidas com características similares ao osso humano. Durante a furação dos materiais sólidos são utilizados métodos experimentais, baseados na extensometria e na termografia, para análise das deformações e da temperatura na broca. Os parâmetros envolvidos na furação são a velocidade de rotação e a geometria da broca constantes em diferentes testes, sendo variável a velocidade de avanço. Em simultâneo, foi desenvolvido um modelo numérico de formulação explícita, com recurso ao método de elementos finitos, através do programa LS-DYNA. Os resultados permitem obter o campo de tensões nos materiais sólidos em função dos diferentes parâmetros de furação. Para a mesma velocidade de rotação e geometria da broca, a diminuição na velocidade de avanço provoca o aumento do nível de tensão. Em relação à resistência mecânica da espuma de poliuretano rígida utilizada, e para a zona de medição instrumentada, não há registo de dano material. O dano é provocado na zona de furação pela remoção do material.

Noninvasive imaging of three-dimensional micro and nanostructures by topological methods

We present topological derivative and energy based procedures for the imaging of micro and nano structures using one beam of visible light of a single wavelength. Objects with diameters as small as 10 nm can be located and their position tracked with nanometer precision. Multiple objects dis-tributed either on planes perpendicular to the incidence direction or along axial lines in the incidence direction are distinguishable. More precisely, the shape and size of plane sections perpendicular to the incidence direction can be clearly determined, even for asymmetric and nonconvex scatterers. Axial resolution improves as the size of the objects decreases. Initial reconstructions may proceed by gluing together two-dimensional horizontal slices between axial peaks or by locating objects at three-dimensional peaks of topological energies, depending on the effective wavenumber. Below a threshold size, topological derivative based iterative schemes improve initial predictions of the lo-cation, size, and shape of objects by postprocessing fixed measured data. For larger sizes, tracking the peaks of topological energy fields that average information from additional incident light beams seems to be more effective.

Voltage and current spectra for matrix power converters

Matrix power converters are used for transforming one alternating-current power supply to another, with different peak voltage and frequency. There are three input lines, with sinusoidally varying voltages which are 120◦ out of phase one from another, and the output is to be delivered as a similar three-phase supply. The matrix converter switches rapidly, to connect each output line in sequence to each of the input lines in an attempt to synthesize the prescribed output voltages. The switching is carried out at high frequency and it is of practical importance to know the frequency spectra of the output voltages and of the input and output currents. We determine in this paper these spectra using a new method, which has significant advantages over the prior default method (a multiple Fourier series technique), leading to a considerably more direct calculation. In particular, the determination of the input current spectrum is feasible here, whereas it would be a significantly more daunting procedure using the prior method instead.

Hábitos de compra de las hortalizas en el País Vasco

Título del monográfico: Usos y costumbres en la alimentación. Recoge los contenidos presentados a las Jornadas de Antropología de la Alimentación, Nutrición y Salud (3. 2006. Bilbao). Coord. por Esther Rebato Ochoa

Efficient photo-induced dielectrophoretic particle trapping on Fe:LiNbO3 for arbitrary two dimensional patterning

1D and 2D patterning of uncharged micro- and nanoparticles via dielectrophoretic forces on photovoltaic z-cut Fe:LiNbO3 have been investigated for the first time. The technique has been successfully applied with dielectric micro-particles of CaCO3 (diameter d = 1-3 ?m) and metal nanoparticles of Al (d = 70 nm). At difference with previous experiments in x- and y-cut, the obtained patterns locally reproduce the light distribution with high fidelity. A simple model is provided to analyse the trapping process. The results show the remarkably good capabilities of this geometry for high quality 2D light-induced dielectrophoretic patterning overcoming the important limitations presented by previous configurations.

Measure-valued mass evolution problems with flux boundary conditions and solution-dependent velocities

In this paper we prove well-posedness for a measure-valued continuity equation with solution-dependent velocity and flux boundary conditions, posed on a bounded one-dimensional domain. We generalize the results of an earlier paper [J. Differential Equations, 259 (2015), pp. 10681097] to settings where the dynamics are driven by interactions. In a forward-Euler-like approach, we construct a time-discretized version of the original problem and employ those results as a building block within each subinterval. A limit solution is obtained as the mesh size of the time discretization goes to zero. Moreover, the limit is independent of the specific way of partitioning the time interval [0, T]. This paper is partially based on results presented in Chapter 5 of [Evolution Equations for Systems Governed by Social Interactions, Ph.D. thesis, Eindhoven University of Technology, 2015], while a number of issues that were still open there are now resolved.

#01 CAGT

Combined media monoprints on photographic paper. 8" x 10", DNA/Recombination Series. The Museum of Contemporary Photography, Chicago

A importancia do coaching na gestao de uma PME

No decorrer desta dissertação será possível verificar a importância do coaching no planeamento e gestão de uma PME. Através de um modelo previamente definido, o modelo TGROW, e da sua aplicação a um caso especifico procura-se os resultados obtidos através desta metodologia e a sua implicação dos processos e no desempenho do trabalho. Com este estudo pretende-se assim demonstrar que é possível melhorar os níveis de produtividade e eficiência dentro de uma organização através do coaching, nomeadamente pela relevância atribuída ás pessoas dentro da organização. Desta forma, apostando na formação dos colaboradores da empresa e de algum modo possibilitando o acesso a um programa de coaching terá como consequência uma valorização dos recurdos humanos da empresa e uma melhoria dos seus resultados globais. Com a aplicação do modelo TGROW a uma PME foi possível registar mudanças significativas no modus operandi do colaborador constatando-se que estas mudanças contribuíram para uma melhoria no desempenho e na eficácia das tarefas realizadas.

Validez de contenido de un cuestionario para evaluar las etapas del cambio de comportamiento en estilos de vida en escolares, Colombia: Estudio FUPRECOL

Estudio de validación en escolares pertenecientes a instituciones educativas oficiales de la ciudad de Bogotá, Colombia. Se diseñó y aplicó el CCC-FUPRECOL que indagó por las etapas de cambio para la actividad física/ejercicio, consumo de frutas, verduras, drogas, tabaco e ingesta de bebidas alcohólicas, de manera auto-diligenciada por formulario estructurado.

Ideación suicida y desesperanza en pacientes con cáncer

El objetivo de la presente investigación fue identificar la relación entre ideación suicida y desesperanza en 160 pacientes con cáncer. La ideación suicida se midió a través de dos ítems de una entrevista semiestructurada, la escala de ideación suicida (ISS), el ítem 9 del inventario de depresión de Beck (BDI-IA). La desesperanza se midió con la escala de desesperanza de Beck (BHS). Los resultados obtenidos indicaron una relación significativa (p=.000) entre ideación suicida y desesperanza; una prevalencia de ideación suicida en los pacientes con cáncer entre 4.4% y 13.8% y de riesgo de suicidio entre 5.6% y 30.6%; y algún grado de desesperanza en 31.9 % de los participantes. De acuerdo con lo anterior, se confirma que existe relación entre la desesperanza y la ideación suicida en pacientes oncológicos adultos. Adicionalmente, que estas variables están presentes en los pacientes y que ameritan atención en la intervención interdisciplinaria.

Cloud parameter retrievals from Meteosat and their effects on the shortwave radiation at the surface

A method based on Spinning Enhanced Visible and Infrared Imager (SEVIRI) measured reflectance at 0.6 and 3.9 µm is used to retrieve the cloud optical thickness (COT) and cloud effective radius (re) over the Iberian Peninsula. A sensitivity analysis of simulated retrievals to the input parameters demonstrates that the cloud top height is an important factor in satellite retrievals of COT and re with uncertainties around 10% for small values of COT and re; for water clouds these uncertainties can be greater than 10% for small values of re. The uncertainties found related with geometries are around 3%. The COT and re are assessed using well-known satellite cloud products, showing that the method used characterize the cloud field with more than 80% (82%) of the absolute differences between COT (re) mean values of all clouds (water plus ice clouds) centred in the range from ±10 (±10 µm), with absolute bias lower than 2 (2 μm) for COT (re) and root mean square error values lower than 10 (8 μm) for COT (re). The cloud water path (CWP), derived from satellite retrievals, and the shortwave cloud radiative effect at the surface (CRESW) are related for high fractional sky covers (Fsc >0.8), showing that water clouds produce more negative CRESW than ice clouds. The COT retrieved was also related to the cloud modification factor, which exhibits reductions and enhancements of the surface SW radiation of the order of 80% and 30%, respectively, for COT values lower than 10. A selected case study shows, using a ground-based sky camera that some situations classified by the satellite with high Fsc values correspond to situations of broken clouds where the enhancements actually occur. For this case study, a closure between the liquid water path (LWP) obtained from the satellite retrievals and the same cloud quantity obtained from ground-based microwave measurements was performed showing a good agreement between both LWP data set values.