Caracterização de neossolos regolíticos da região semiárida do Estado de Pernambuco

Estudos de caracterização de solos em regiões ainda pouco exploradas, além de disponibilizarem e ampliarem a base de informações sobre as mais distintas ordens de solos do território nacional, também permitem sistematizar informações sobre suas propriedades, que poderão servir de subsídio para o desenvolvimento de práticas de manejo e uso sustentável das terras. Entre os principais solos recorrentes na região semiárida pernambucana, destacam-se os Neossolos Regolíticos, os quais perfazem aproximadamente 27 % da superfície do Estado e recobrem importantes áreas voltadas à produção agrícola, especialmente à agricultura familiar. Considerando a possibilidade de ocorrência de Neossolos Regolíticos com distintas propriedades físicas, químicas ou mineralógicas, em razão da existência de distintos contextos geológicos e climáticos ao longo do Estado de Pernambuco, o presente trabalho teve como objetivo caracterizar física, química e mineralogicamente Neossolos Regolíticos ao longo da região semiárida do Estado de Pernambuco, bem como relacionar os solos com sua litologia. Para isso, foram selecionados cinco perfis de Neossolos Regolíticos em diversos municípios do Estado de Pernambuco (P1=São Caetano, P2=Lagoa do Ouro, P3=Caetés, P4=São João e P5=Parnamirim). Os perfis foram descritos morfologicamente, coletando-se amostras de todos os horizontes do solo e da rocha do embasamento. Foram realizadas análises físicas e químicas para fins de classificação de solos, análises mineralógicas das frações grossas (cascalho e areia) por microscopia óptica e das frações silte e argila por difração de raios X, além de análises petrográficas das amostras de rochas. De acordo com os resultados, observou-se a ocorrência de solos semelhantes e com pequeno grau de desenvolvimento pedogenético, variando de medianamente a muito profundos, com sequência de horizontes A-AC-C e Cr e textura arenosa a média. Dois perfis apresentaram caráter solódico em profundidade. Todos os solos apresentaram baixos teores de matéria orgânica e P disponível. Apesar dos baixos teores de cátions trocáveis, todos os perfis são eutróficos. A assembleia mineralógica das frações cascalho, areia e silte é constituída essencialmente por quartzo, seguido de feldspatos e mica, corroborando a constituição petrográfica analisada. A caulinita é o principal argilomineral da fração argila em todos os perfis e horizontes estudados, indicando um importante processo de monossialitização em solos autóctones, em clima caracteristicamente semiárido. No perfil P2, devido à posição mais baixa do solo na paisagem, ocorreram minerais esmectíticos com misturas de fases entre montmorilonita, beidelita ou nontronita, identificados pela análise de DRX, empregando o teste de Greene-Kelly.

Semiclassical coupled wave theory and its application to TE waves in one dimensional crystals

A semiclassical coupled-wave theory is developed for TE waves in one-dimensional periodic structures. The theory is used to calculate the bandwidths and reflection/transmission characteristics of such structures, as functions of the incident wave frequency. The results are in good agreement with exact numerical simulations for an arbitrary angle of incidence and for any achievable refractive index contrast on a period of the structure.

The nonlinear relaxation time and quasideterministic-theory approaches to characterize the decay of unestable states

We present the relationship between nonlinear-relaxation-time (NLRT) and quasideterministic approaches to characterize the decay of an unstable state. The universal character of the NLRT is established. The theoretical results are applied to study the dynamical relaxation of the Landau model in one and n variables and also a laser model.

Effect of External Noise Correlation in Optical Coherence Resonance

Coherence resonance occurring in semiconductor lasers with optical feedback is studied via the Lang-Kobayashi model with external nonwhite noise in the pumping current. The temporal correlation and the amplitude of the noise have a highly relevant influence in the system, leading to an optimal coherent response for suitable values of both the noise amplitude and correlation time. This phenomenon is quantitatively characterized by means of several statistical measures.

Numerical investigation of iso-spectral cavities built from trinagles

We present computational approaches as alternatives to a recent microwave cavity experiment by S. Sridhar and A. Kudrolli [Phys. Rev. Lett. 72, 2175 (1994)] on isospectral cavities built from triangles. A straightforward proof of isospectrality is given, based on the mode-matching method. Our results show that the experiment is accurate to 0.3% for the first 25 states. The level statistics resemble those of a Gaussian orthogonal ensemble when the integrable part of the spectrum is removed.

Slow dynamis in the 3D gonihedric model

We provide analytical evidence of stochastic resonance in polarization switching vertical-cavity surface-emitting lasers (VCSELs). We describe the VCSEL by a two-mode stochastic rate equation model and apply a multiple time-scale analysis. We were able to reduce the dynamical description to a single stochastic differential equation, which is the starting point of the analytical study of stochastic resonance. We confront our results with numerical simulations on the original rate equations, validating the use of a multiple time-scale analysis on stochastic equations as an analytical tool.

Luis Cernuda: emotivitat platònica versus mentalitat presocraticoaristotèlica

L'objectiu d'aquest article és mostrar com, malgrat declarar-se materialista o presocraticoaristotèlic, l'emotivitat poètica de Luis Cernuda és clarament platònica o idealista, de manera que la tensió entre la realitat i el desig que sempre ha definit la seva poesia es referma també gràcies a l'anàlisi de la seva obra des d¿una òptica més filosòfica que no pas literària.

Comparação de métodos convencional e alternativo para determinar Cu, Fe, Mn e Zn em extratos de solos obtidos com solução de mehlich-1

Nos laboratórios brasileiros, a determinação de micronutrientes para estudos de fertilidade de solos é realizada por extração com solução de Mehlich-1 (M-1), utilizando-se uma razão solo: extrator de 1:5 m/v e posterior quantificação por espectrometria de absorção atômica (AAS). No entanto, muitos laboratórios também empregam razão solo:extrator M-1 de 1:10 m/v para determinar macronutrientes e, ou, quantificar por espectrometria de emissão óptica com plasma indutivamente acoplado (ICP OES), em substituição ao AAS. Como estudos comparativos entre as concentrações de micronutrientes obtidos por esses métodos alternativos são escassos, o objetivo deste trabalho foi investigar se essas diferentes condições experimentais gerariam diferentes resultados. Os resultados foram estatisticamente tratados e revelaram que as concentrações de Fe e Mn, utilizando-se ambas as razões de solo:extrator M-1 (1:5 e 1:10 m/v) e de Zn, na razão solo:extrator M-1 de 1:10 m/v, foram estatisticamente iguais, enquanto as concentrações de Cu em ambas as razões solo:extrator M-1 e de Zn na razão solo:extrator de 1:5 m/v foram diferentes, quando as duas técnicas de quantificação (ICP OES e AAS) foram comparadas. Também, todas as concentrações de Cu, Fe, Mn e Zn obtidas utilizando razão solo:extrator M-1 de 1:5 m/v foram diferentes daquelas encontradas com a razão de 1:10 m/v, independentemente da técnica de quantificação. A maioria dessas concentrações foi maior quando se usou a razão de 1:5 m/v e alterou a classe de interpretação dos teores. Portanto, não recomenda-se o uso da razão solo:extrator de 1:5 para as extrações dos micronutrientes Cu, Fe, Mn e Zn com solução M-1 de amostras de solo.

Luis Cernuda: emotividad platónica versus mentalidad presocrático-aristotélica

El objetivo de este artículo es mostrar cómo, pese a declararse materialista o presocrático-aristotélico, la emotividad poética de Luis Cernuda es claramente platónica o idealista, de tal suerte que la tensión entre realidad y deseo que siempre ha definido su poesía se reafirma también gracias al análisis de su obra desde una óptica más filosófica que literaria.

Reconfigurable beams with arbitrary polarization and shape distributions at a given plane

Methods for generating beams with arbitrary polarization based on the use of liquid crystal displays have recently attracted interest from a wide range of sources. In this paper we present a technique for generating beams with arbitrary polarization and shape distributions at a given plane using a Mach-Zehnder setup. The transverse components of the incident beam are processed independently by means of spatial light modulators placed in each path of the interferometer. The modulators display computer generated holograms designed to dynamically encode any amplitude value and polarization state for each point of the wavefront in a given plane. The steps required to design such beams are described in detail. Several beams performing different polarization and intensity landscapes have been experimentally implemented. The results obtained demonstrate the capability of the proposed technique to tailor the amplitude and polarization of the beam simultaneously.

Film-free laser forward printing of transparent and weakly absorbing liquids

A laser-based technique for printing transparent and weakly absorbing liquids is developed. Its principle of operation relies in the tight focusing of short laser pulses inside the liquid and close to its free surface, in such a way that the laser radiation is absorbed in a tiny volume around the beam waist, with practically no absorption in any other location along the beam path. If the absorbed energy overcomes the optical breakdown threshold, a cavitation bubble is generated, and its expansion results in the propulsion of a small fraction of liquid which can be collected on a substrate, leading to the printing of a microdroplet for each laser pulse. The technique does not require the preparation of the liquid in thin film form, and its forward mode of operation imposes no restriction concerning the optical properties of the substrate. These characteristics make it well suited for printing a wide variety of materials of interest in diverse applications. We demonstrate that the film-free laser forward printing technique is capable of printing microdroplets with good resolution, reproducibility and control, and analyze the influence of the main process parameter, laser pulse energy. The mechanisms of liquid printing are also investigated: time-resolved imaging provides a clear picture of the dynamics of liquid transfer which allows understanding the main features observed in the printed droplets.

On-axis joint transform correlation based on a four-level power spectrum

We propose a method to obtain a single centered correlation with use of a joint transform correlator. We analyze the required setup to carry out the whole process optically, and we also present experimental results.

Full complex Fresnel holograms displayed on liquid cristal displays

We propose a method to display full complex Fresnel holograms by adding the information displayed on two analogue ferroelectric liquid crystal spatial light modulators. One of them works in real-only configuration and the other in imaginary-only mode. The Fresnel holograms are computed by backpropagating an object at a selected distance with the Fresnel transform. Then, displaying the real and imaginary parts on each panel, the object is reconstructed at that distance from the modulators by simple propagation of light. We present simulation results taking into account the specifications of the modulators as well as optical results. We have also studied the quality of reconstructions using only real, imaginary, amplitude or phase information. Although the real and imaginary reconstructions look acceptable for certain distances, full complex reconstruction is always better and is required when arbitrary distances are used.

Diffraction theory of Fresnel lenses encoded in low-resolution devices

A mathematical model that describes the behavior of low-resolution Fresnel lenses encoded in any low-resolution device (e.g., a spatial light modulator) is developed. The effects of low-resolution codification, such the appearance of new secondary lenses, are studied for a general case. General expressions for the phase of these lenses are developed, showing that each lens behaves as if it were encoded through all pixels of the low-resolution device. Simple expressions for the light distribution in the focal plane and its dependence on the encoded focal length are developed and commented on in detail. For a given codification device an optimum focal length is found for best lens performance. An optimization method for codification of a single lens with a short focal length is proposed.

Roughness and light scattering of ion-beam-sputtered fluoride coatings for 193 nm

Scattering characteristics of multilayer fluoride coatings for 193 nm deposited by ion beam sputtering and the related interfacial roughnesses are investigated. Quarter- and half-wave stacks of MgF2 and LaF3 with increasing thickness are deposited onto CaF2 and fused silica and are systematically characterized. Roughness measurements carried out by atomic force microscopy reveal the evolution of the power spectral densities of the interfaces with coating thickness. Backward-scattering measurements are presented, and the results are compared with theoretical predictions that use different models for the statistical correlation of interfacial roughnesses.