A multimodal tablet-based interface for designing and reviewing 3D engineering models

The ability to view and interact with 3D models has been happening for a long time. However, vision-based 3D modeling has only seen limited success in applications, as it faces many technical challenges. Hand-held mobile devices have changed the way we interact with virtual reality environments. Their high mobility and technical features, such as inertial sensors, cameras and fast processors, are especially attractive for advancing the state of the art in virtual reality systems. Also, their ubiquity and fast Internet connection open a path to distributed and collaborative development. However, such path has not been fully explored in many domains. VR systems for real world engineering contexts are still difficult to use, especially when geographically dispersed engineering teams need to collaboratively visualize and review 3D CAD models. Another challenge is the ability to rendering these environments at the required interactive rates and with high fidelity. In this document it is presented a virtual reality system mobile for visualization, navigation and reviewing large scale 3D CAD models, held under the CEDAR (Collaborative Engineering Design and Review) project. It’s focused on interaction using different navigation modes. The system uses the mobile device's inertial sensors and camera to allow users to navigate through large scale models. IT professionals, architects, civil engineers and oil industry experts were involved in a qualitative assessment of the CEDAR system, in the form of direct user interaction with the prototypes and audio-recorded interviews about the prototypes. The lessons learned are valuable and are presented on this document. Subsequently it was prepared a quantitative study on the different navigation modes to analyze the best mode to use it in a given situation.

Virtual 3D Support Contents Oriented to Interactive Self-Learning

In the educational project described in this paper, new virtual 3D didactical contents have been developed to achieve specific outcomes, within the frame of a new methodology oriented to objectives of the European Higher Education Area directives. The motivation of the project was to serve as a new assessment method, to create a link between new programs of study with the older ones. In this project, new rubrics have been developed to be employed as an objective method of evaluation of specific and transversal outcomes, to accomplish the certification criteria of institutions like ABET (Accreditation Board for Engineering and Technology).

Virtual Instruments in Dimensional Metrology

During the last five years, in order to improve understanding of content related to "Coordinate Metrology", the Laboratorio de Metrología y Metrotecnia (LMM) from the Polytechnic University of Madrid offers its PhD students, as a course work, the construction of a virtual instrument. This virtual instrument simulates the imaging of a part to be measured by optical dimensional metrology instruments (microscopes, profile projectors, vision machines). The LMM provides students with images similar to those they would obtain with real instrumentation for the instrument adjustment and calibration process. Working with these images, students should determine the adjustment parameters of the virtual instrument. Once these parameters are set, the student can perform the proper calibration of the virtual instrument. Beyond this process, the instrument is already able to perform traceable measurement. In order to do that, LMM offers students some images of parts. Students should perform some measurements using those images and estimate the corresponding uncertainties.

Migration to an a on-line laboatory in mechanical engineering. The case of a cam-follower design practice.

The European Higher Education Area (EHEA) has leaded to a change in the way the subjects are taught. One of the more important aspects of the EHEA is to support the autonomous study of the students. Taking into account this new approach, the virtual laboratory of the subject Mechanisms of the Aeronautical studies at the Technical University of Madrid is being migrated to an on-line scheme. This virtual laboratory consist on two practices: the design of cam-follower mechanisms and the design of trains of gears. Both practices are software applications that, in the current situation, need to be installed on each computer and the students carry out the practice at the computer classroom of the school under the supervision of a teacher. During this year the design of cam-follower mechanisms practice has been moved to a web application using Java and the Google Development Toolkit. In this practice the students has to design and study the running of a cam to perform a specific displacement diagram with a selected follower taking into account that the mechanism must be able to work properly at high speed regime. The practice has maintained its objectives in the new platform but to take advantage of the new methodology and try to avoid the inconveniences that the previous version had shown. Once the new practice has been ready, a pilot study has been carried out to compare both approaches: on-line and in-lab. This paper shows the adaptation of the cam and follower practice to an on-line methodology. Both practices are described and the changes that has been done to the initial one are shown. They are compared and the weak and strong points of each one are analyzed. Finally we explain the pilot study carried out, the students impression and the results obtained.

Migration to an a on.line laboratory in mechanical engineering. The case of a cam follower design practice.

The European Higher Education Area (EHEA) has leaded to a change in the way the subjects are taught. One of the more important aspects of the EHEA is to support the autonomous study of the students. Taking into account this new approach, the virtual laboratory of the subject Mechanisms of the Aeronautical studies at the Technical University of Madrid is being migrated to an on-line scheme. This virtual laboratory consist on two practices: the design of cam-follower mechanisms and the design of trains of gears. Both practices are software applications that, in the current situation, need to be installed on each computer and the students carry out the practice at the computer classroom of the school under the supervision of a teacher. During this year the design of cam-follower mechanisms practice has been moved to a web application using Java and the Google Development Toolkit. In this practice the students has to design and study the running of a cam to perform a specific displacement diagram with a selected follower taking into account that the mechanism must be able to work properly at high speed regime. The practice has maintained its objectives in the new platform but to take advantage of the new methodology and try to avoid the inconveniences that the previous version had shown. Once the new practice has been ready, a pilot study has been carried out to compare both approaches: on-line and in-lab. This paper shows the adaptation of the cam and follower practice to an on-line methodology. Both practices are described and the changes that has been done to the initial one are shown. They are compared and the weak and strong points of each one are analyzed. Finally we explain the pilot study carried out, the students impression and the results obtained.

Mechanical design optimization for multi-finger haptic devices applied to virtual grasping manipulation

This paper describes the design of a modular multi-finger haptic device for virtual object manipulation. Mechanical structures are based on one module per finger and can be scaled up to three fingers. Mechanical configurations for two and three fingers are based on the use of one and two redundant axes, respectively. As demonstrated, redundant axes significantly increase workspace and prevent link collisions, which is their main asset with respect to other multi-finger haptic devices. The location of redundant axes and link dimensions have been optimized in order to guarantee a proper workspace, manipulability, force capability, and inertia for the device. The mechanical haptic device design and a thimble adaptable to different finger sizes have also been developed for virtual object manipulation.

Strengthening communication skills in an innovative context of engineering project management learning

This document presents an innovative, formal educational initiative that is aimed at enhancing the development of engineering students’ specific competences when studying Project Management (PM) subject. The framework of the experience combines (1) theoretical concepts, (2) the development of a real-case project carried out by multidisciplinary groups of three different universities, (3) the use of software web 2.0 tools and (4) group and individual assignments of students that play different roles (project managers and team members). Under this scenario, the study focuses on monitoring the communication competence in the ever growing PM virtual environment. Factors such as corporal language, technical means, stage, and PM specific vocabulary among others have been considered in order to assess the students’ performance on this issue. As a main contribution, the paper introduces an ad-hoc rubric that, based on previous investigations, has been adapted and tested for the first time to this new and specific context. Additionally, the research conducted has provided some interesting findings that suggest further actions to improve and better define future rubrics, oriented to communication or even other competences. As specific PM subject concerns, it has been detected that students playing the role of Project Managers strengthen their competences more than those ones that play the role of Team Members. It has also been detected that students have more difficulty assimilating concepts related to risk and quality management. However those concepts related with scope, time or cost areas of knowledge have been better assimilated by the students.

Unidad didáctica sobre el uso del programa Virtual.Lab para simulaciones acústicas. Parte I

El presente Proyecto de Fin de Carrera supone el propósito conjunto de los alumnos Álvaro Morillas y Fernando Sáez, y del profesor Vladimir Ulin, de desarrollar una unidad didáctica sobre el programa de simulación para ingeniería Virtual.Lab. La versión sobre la que se ha trabajado para realizar este texto es la 11, publicada en agosto de 2012. Virtual.Lab, del fabricante belga LMS International, es una plataforma software de ingeniería asistida por ordenador, que agrupa en una misma aplicación varias herramientas complementarias en el diseño de un producto, desde su definición geométrica a los análisis de durabilidad, ruido u optimización. No obstante, de entre todas las posibles simulaciones que nos permite el programa, en este proyecto sólo se tratan las que están relacionadas con la acústica. Cabe resaltar que gran parte de los conceptos manejados en Virtual.Lab son compatibles con el programa CATIA V5, ya que ambos programas vienen instalados y funcionan conjuntamente. Por eso, el lector de este proyecto podrá transportar sus conocimientos al que es uno de los programas estándar en las industrias aeronáutica, naval y automovilística, entre otras. Antes de este proyecto, otros alumnos de la escuela también realizaron proyectos de fin de carrera en el campo de la simulación computarizada en acústica. Una característica común a estos trabajos es que era necesario hacer uso de distintos programas para cada una de las etapas de simulación (como por ejemplo, ANSYS para el modelado y estudio de la vibración y SYSNOISE para las simulaciones acústicas, además de otros programas auxiliares para las traducciones de formato). Con Virtual.Lab desaparece esta necesidad y el tiempo empleado se reduce. Debido a que las soluciones por ordenador están ganando cada vez más importancia en la industria actual, los responsables de este proyecto consideran la necesidad de formación de profesionales en esta rama. Para responder a la demanda empresarial de trabajadores cualificados, se espera que en los próximos años los planes de estudio contengan más cursos en esta materia. Por tanto la intención de los autores es que este material sea de utilidad para el aprendizaje y docencia de estas asignaturas en cursos sucesivos. Por todo esto, se justifica la relevancia de este PFC como manual para introducir a los alumnos interesados en iniciarse en un sistema actual, de uso extendido en otras universidades tecnológicas europeas, y con buenas perspectivas de futuro. En este proyecto se incluyen varios ejemplos ejecutables desde el programa, así como vídeos explicativos que ayudan a mostrar gráficamente los procesos de simulación. Estos archivos se pueden encontrar en el CD adjunto. Abstract This final thesis is a joint project made by the students Álvaro Morillas and Fernando Sáez, and the professor Vladimir Ulin. The nature of the joint regards the writing of a didactic unit on Virtual.Lab, the simulation software. The software version used in this text is the number 11, released in August 2012. Virtual.Lab, from the Belgian developer LMS International, is a computer-aided engineering software which is used for several related tasks in this field: product design, durability simulation, optimization, etc. However, this project is focused on the acoustical capabilities. It is worthy to highlight that most procedures explained in this text can be used in the software CATIA V5 as well. Both tools come installed together and may be used at the same time. Therefore, the reader of this project will be able to use the acquired knowledge in one of the most relevant softwares for the aerospace, marine and automotive engineering. Previously to the development of this project, this School has conducted projects on this field. These projects regarded the use of ANSYS for modeling and meshing stages as well as the use of SYSNOISE for the final acoustic analysis. Since both systems use different file formats, a third-party translation software was required. This thesis fulfill this pending necessity with Virtual.Lab; the translation software procedure is not necessary anymore and simulations can be done in a more flexible, fast way. Since companies have an increasing usage of numerical methods in the development of their products and services, the authors think that it is important to develop the appropriate method to instruct new professionals in the field. Thus, the aim of this project is to help teachers and students in their process of learning the use of this leading software in acoustical simulations. For all the reasons mentioned above, we consider that this project is relevant for the School and the educational community. Aiming to achieve this objective the author offers example files and video demonstrations with guidance in the CD that accompanies this material. This facilitates the comprehension of the practical tasks and guides the prospect users of the software.

Enseñanza (y aprendizaje) virtual de Geología por parte del alumno=Virtual education (and learning) of Geology by students

Una de las maneras más efectivas para asentar conocimientos se produce cuando, además de realizar un aprendizaje práctico, se intentan transmitir a otra persona. De hecho, los alumnos muchas veces prestan más atención a sus compañeros que al profesor. En la E.T.S.I. Minas de Madrid se ha llevado a cabo un programa de innovación educativa en asignaturas relacionadas con la Geología mediante nuevas tecnologías para mejorar el aprendizaje basado en el trabajo práctico personal del alumno, con la realización de vídeos en el medio físico (campo) en los que explican los aspectos geológicos visibles a diferentes escalas. Estos vídeos se han subido a las plataformas “moodle”, “facebook” y canal “youtube” donde compañeros, alumnos de otras Universidades y personas interesadas pueden consultarlos. De esta manera se pretende que, además de adquirir conocimientos geológicos, los alumnos adquieren el hábito de expresarse en público con un lenguaje técnico. Los alumnos manifestaron su satisfacción por esta actividad, aunque idea del rodaje de vídeos no resultó inicialmente muy popular. Se ha observado una mejora en las calificaciones, así como un incremento de la motivación. De hecho, los estudiantes manifestaron haber adquirido, además de los conceptos geológicos, seguridad a la hora de expresarse en público. Palabras clave: innovación educativa, nuevas tecnologías (TIC), Geología Abstract- Knowledge is gained by practice, but one of the most effective ways is when one tries to transmit it to others. Likewise, students pay more attention to their classmates than to teachers. In the Geological Engineering Department of the Madrid School of Mines, we have run an educational innovation program in courses related to Geology using new technologies (ITC) in order to increase the acquisition of geological knowledge. This program is designed mainly on the basis of individual and group work with video recordings in the field in which students explain geological concepts at various scales. These videos have been uploaded to the “Moodle”, “Facebook” and “YouTube” channel of the Madrid School of Mines, where other students from the same university or elsewhere can view them. Students acquire geological knowledge and the ability to address the general public using technical language. The realization of these videos has been warmly welcomed by students. Notably, they show increased motivation, accompanied by an improvement in grades, although at the beginning this program was not very popular because of student insecurity. Students have expressed that they learnt geological concepts but also gained confidence in public speaking using technical language

Collaborative Engineering: an Airbus case study

This document introduces the main concepts of Collaborative Engineering as a new methodology, procedures and tools to design and develop an aircraft, as Airbus Military is implementing. Airbus designs and industrializes aircrafts under Concurrent Engineering techniques since decades with success. The introduction of new PLM methodologies, procedures and tools, mainly in the industrialization areas, and the need to reduce time-to-market conducted Airbus Military to push the engineering teams to do things in a different way. Traditional Engineering works sequentially, Concurrent Engineering basically overlaps tasks between teams using maturity states and taking assuming risks. Collaborative Engineering promotes a single team to develop product, processes and resources from the conceptual phase to the start of the serial production. The deliverable of the team is an iDMU (industrial DMU), a complete definition and verification of the virtual manufacturing of the product.

Increasing the Intelligence of Virtual Sales Assistants through Knowledge Modeling Techniques

Shopping agents are web-based applications that help consumers to find appropriate products in the context of e-commerce. In this paper we argue about the utility of advanced model-based techniques that recently have been proposed in the fields of Artificial Intelligence and Knowledge Engineering, in order to increase the level of support provided by this type of applications. We illustrate this approach with a virtual sales assistant that dynamically configures a product according to the needs and preferences of customers.

A data-globe and immersive virtual reality environment for upper limb rehabilitation after spinal cord injury

While a number of virtual data-gloves have been used in stroke, there is little evidence about their use in spinal cord injury (SCI). A pilot clinical experience with nine SCI subjects was performed comparing two groups: one carried out a virtual rehabilitation training based on the use of a data glove, CyberTouch combined with traditional rehabilitation, during 30 minutes a day twice a week along two weeks; while the other made only conventional rehabilitation. Furthermore, two functional indexes were developed in order to assess the patient’s performance of the sessions: normalized trajectory lengths and repeatability. While differences between groups were not statistically significant, the data-glove group seemed to obtain better results in the muscle balance and functional parameters, and in the dexterity, coordination and fine grip tests. Related to the indexes that we implemented, normalized trajectory lengths and repeatability, every patient showed an improvement in at least one of the indexes, either along Y-axis trajectory or Z-axis trajectory. This study might be a step in investigating new ways of treatments and objective measures in order to obtain more accurate data about the patient’s evolution, allowing the clinicians to develop rehabilitation treatments, adapted to the abilities and needs of the patients.

Virtual science hub: an open source platform to enrich science teaching

This paper presents the Virtual Science Hub platform. It is an open source platform that combines a social network, an e-learning authoring tool, a videoconference service and a learning object repository for science teaching enrichment. These four main functionalities fit very well together. The platform was released in April 2012 and since then it has not stopped growing. Finally we present the results of the surveys conducted and the statistics gathered to validate this approach.

Improving engineering students' communication competence: designing innovative learning strategies

This research presents an innovative and formal educational initiative that is aimed at enhancing the development of engineering students’ specific competencies when studying Engineering Project Management subject. The framework of the experience combines theoretical concepts, the development of a real-case project carried out by multidisciplinary groups of three different universities, the use of software web 2.0 tools, and group and individual assignments of students that play different roles (project managers and team members). Under this scenario, this paper focuses on monitoring the communication competence in the ever growing Project Management virtual environment. Factors such as corporal language, technical means, stage, and management specific vocabulary among others have been considered in order to assess the students’ performance on this issue. As a main contribution, the paper introduces an ad-hoc rubric that, based on previous investigations, has been adapted and tested to this specific context. Additionally, the research conducted has provided some interesting findings that suggest further actions to improve and better define future rubrics, oriented to communication or even other competencies. As specific Project Management subject concerns, it has been detected that students playing the role of Project Managers strengthen their competencies more than those ones that play the role of Team Members. It has also been detected that students have more difficulty assimilating concepts related to risk and quality management. However those concepts related with areas of knowledge like scope, time or cost have been better assimilated by the students.