Resposta do cafeeiro arábica ao magnésio em solos fertilizados com altas doses de potássio

O aumento das doses de potássio (K) para atender a demanda nutricional desse nutriente em cafezais produtivos induz a deficiência de Mg. Esta pesquisa foi realizada com o objetivo de compreender como a classe de solo interfere na interação entre esses nutrientes (K e Mg), de maneira que a aplicação de alta dose de K não afete a nutrição da planta em relação ao Mg. Dois experimentos foram conduzidos em duas classes de solo: Latossolo, com textura muito argilosa, em Machado-MG, e Argissolo, com textura media sobre argilosa, em Monte Santo de Minas-MG. Adotou-se delineamento fatorial com três doses de K (110, 260 e 390 kg ha-1 K2O) x cinco doses de Mg (0, 81, 162, 324 e 405 kg ha-1 MgO), com três repetições. No Argissolo, a lixiviação de K impediu a redução da concentração foliar de Mg, independentemente da dose de K. No Latossolo, a concentração de Mg foliar variou com a dose de K, e apresentou ajuste quadrático. A concentração foliar de Mg aumentou linearmente com a dose desse nutriente, independentemente da classe de solo e da dose de K.

Gráfico de controle para monitoramento da razão da demanda e mão de obra em retaguarda de serviços no setor bancário.

O monitoramento da razão Z de duas variáveis através de gráfico de controle tem sido um tema recentemente explorado na literatura. Para analisar mais o assunto, o estudo avalia a eficiência e viabilidade de aplicação dessa ferramenta como suporte na tomada de decisão para gerenciamento de capacidade de mão de obra de retaguarda (doravante mencionado como Backoffice) de serviço de empresa do setor bancário. Tradicionalmente, gráficos de controle tem sido utilizados para monitorar o processo produtivo de manufaturas, mas recentemente tem sido adotado para monitoramento de alguns serviços. Apesar de ainda seguir muitos conceitos pioneiros na manufatura, a atividade do setor de serviços apresenta suas particularidades como, por exemplo, a impossibilidade de gerar estoque. Assim, a necessidade de adequar seus recursos à demanda torna-se essencial, sendo fundamental a gestão de controles e sua urgência para que possa reagir rapidamente em caso de variação de demanda e adequar sua capacidade. Em um cenário de restrição de recursos, planejar é crucial para evitar desperdícios e garantir eficiência. O objetivo deste estudo é apresentar o gráfico de controle como ferramenta para monitorar a razão de duas variáveis aleatórias: a demanda e a mão de obra em Backoffice de serviço em um banco. Nesse trabalho, gráfico de controle de Shewhart tradicional e gráfico de controle de Shewhart com regras suplementares são analisados e os resultados obtidos confirmam a possibilidade de utilização da ferramenta de gráficos de controle para o gerenciamento e adequação de mão de obra para atender a demanda. O monitoramento da razão (demanda/ mão de obra) ajudará o gestor a alocar adequadamente o time (mão de obra) de acordo com a demanda e a capacidade produtiva. Como contribuição, o estudo avalia o comportamento da razão Z = X/Y em situação de alta variabilidade da variável X e baixa variabilidade da variável Y .

The merger history of massive spheroids since z ∼ 1 is size independent

Using a compilation of 379 massive (stellar mass M ≳ 10^11 M_⊙) spheroid-like galaxies from the near-infrared Palomar/DEEP-2 survey, we investigated, up to z ∼ 1, whether the presence of companions depends on the size of the host galaxy. We explored the presence of companions for mass ratios with respect to the central massive galaxy down to 1 : 10 and 1 : 100, and within projected distances of 30, 50 and 100 kpc of these objects. We found evidence that these companions are equally distributed around both compact and extended massive spheroid-like galaxies. This suggests that, at least since z ∼ 1, the merger activity in these objects is nearly homogeneous across the whole population and that the merger history is not affected by the size of the host galaxy. Our results could indicate that compact and extended massive spheroid-like galaxies are increasing in size at the same rate.

Estudo do processo de absorção e dessorção de CO2 na solução aquosa de metildietanolamina e piperazina.

Estudou-se o processo de absorção e dessorção de CO2 em solução aquosa da mistura de metildietanolamina (MDEA) e piperazina (PZ). Os ensaios de absorção foram realizados numa coluna de parede molhada com promotor de película, e, os ensaios de dessorção num sistema de semibatelada, ambos em escala de laboratório. Os testes experimentais de absorção foram realizados a 298 K e pressão atmosférica, com vazão de gás (CO2 e ar atmosférico) de 2,2.10-4 m3 s-1 e as seguintes vazões de líquido: 1,0.10-6; 1,3.10-6 e 1,7.10-6 m3 s-1. O sistema de absorção foi caracterizado através da determinação da área interfacial, a, o coeficiente volumétrico de transferência de massa, kGa, e o coeficiente volumétrico global médio de transferência de massa, KGa. No caso dos ensaios de dessorção, estes foram realizados nas temperaturas de 353, 363 e 368 K, onde empregou-se uma solução carbonatada de 10% PZ-20% MDEA e uma corrente de ar atmosférico nas vazões de 1,1.10-5 m3 s-1 e 2,7.10-5 m3 s-1. Este sistema foi caracterizado através da determinação do coeficiente volumétrico global de transferência de massa, KLa. Os resultados experimentais da área interfacial mostram que este é função da vazão do líquido, sugerindo uma maior área de irrigação como o aumento desta, onde teve-se uma maior área de transferência de massa. O resultado do parâmetro, KGa, indica uma dependência da vazão de líquido, a qual está associada à variação da área interfacial e à dependência do parâmetro KG com o perfil das concentrações da MDEA e PZ ao longo da coluna. A partir da teoria do duplo filme e pelo conhecimento dos parâmetros KGa, a e kGa, estimou-se um parâmetro cinético-difusivo associado à fase líquida, (( ) ) . Os resultados experimentais mostram que esse parâmetro varia pouco com a vazão de líquido, indicando tratar-se de um processo independente da hidrodinâmica do líquido, característico de sistemas com reação rápida. A concentração das aminas e carbamatos, nos ensaios de absorção e dessorção, foi determinada através dos modelos de calibração obtidas pela técnica de espectroscopia no infravermelho. Nos ensaios de absorção, foram observados que a concentração de PZ teve uma variação considerável (4 a 5% massa massa-1), entanto que a de MDEA variou pouco (0,3 a 0,5% massa massa-1), sugerindo que o processo de absorção de CO2 na mistura MDEA-PZ é controlado principalmente pela PZ, e supõe-se que a MDEA tem um papel de receptor de prótons procedentes da reação entre a PZ e o CO2. Nos ensaios de dessorção, observou-se que esse processo é afetado pela temperatura, sendo que, em temperaturas perto da ebulição (372 K), a taxa de dessorção de CO2 é maior do que em temperaturas menores, em certa forma é devido à dependência da velocidade de reação química com a temperatura. Os resultados do parâmetro KLa indicam que este diminui em função da concentração de carbamato de PZ (por exemplo, na temperatura de 368 K, de 7,5.10-4 a 1,0.10-4 s-1), devido a que este componente é decomposto em altas temperaturas gerando o CO2 e as aminas, sugerindo uma diminuição na velocidade de dessorção de CO2. Assim também, os resultados experimentais do parâmetro KLa indicam que este aumenta ligeiramente com a vazão do gás.

The Valuation of Agricultural Land and the Influence of Government Payments. Factor Markets Working Paper No. 10, December 2011

This study gives an overview of the theoretical foundations, empirical procedures and derived results of the literature identifying determinants of land prices. Special attention is given to the effects of different government support policies on land prices. Since almost all empirical studies on the determination of land prices refer either to the net present value method or the hedonic pricing approach as a theoretical basis, a short review of these models is provided. While the two approaches have different theoretical bases, their empirical implementation converges. Empirical studies use a broad range of variables to explain land values and we systematise those into six categories. In order to investigate the influence of different measures of government support on land prices, a meta-regression analysis is carried out. Our results reveal a significantly higher rate of capitalisation for decoupled direct payments and a significantly lower rate of capitalisation for agri-environmental payments, as compared to the rest of government support. Furthermore, the results show that taking theoretically consistent land rents (returns to land) and including non-agricultural variables like urban pressure in the regression implies lower elasticities of capitalisation. In addition, we find a significant influence of the land type, the data type and estimation techniques on the capitalisation rate.

What caused the eurozone crisis? CEPS Commentary, 27 November 2015

After five years of crisis there are now signs that the eurozone economy is recovering, but it is far from being back to normal. The authors of this CEPS Commentary sound a note of caution: although progress has been made with the banking union and new institutions like the European Stability Mechanism (ESM), more needs to be done. The eurozone crisis may be in remission now but when interest rates start to rise, or if confidence evaporates again due to global shock, the systemic cracks could reappear at an alarming rate.

On Managing Stochastic Decentralized Projects

Thesis (Ph.D.)--University of Washington, 2016-06

Scale-up in emulsion polymerisation

The procedure for successful scale-up of batchwise emulsion polymerisation has been studied. The relevant literature on liquid-liquid dispersion on scale-up and on emulsion polymerisation has been crit1cally reviewed. Batchwise emulsion polymerisation of styrene in a specially built 3 litre, unbaffled, reactor confirmed that impeller speed had a direct effect on the latex particle size and on the reaction rate. This was noted to be more significant at low soap concentrations and the phenomenon was related to the depletion of micelle forming soap by soap adsorption onto the monomer emulsion surface. The scale-up procedure necessary to maintain constant monomer emulsion surface area in an unbaffled batch reactor was therefore investigated. Three geometrically similar 'vessels of 152, 229 and 305mm internal diameter, and a range of impeller speeds (190 to 960 r.p.m.) were employed. The droplet sizes were measured either through photomicroscopy or via a Coulter Counter. The power input to the impeller was also measured. A scale-up procedure was proposed based on the governing relationship between droplet diameter, impeller speed and impeller diameter. The relationships between impeller speed soap concentration, latex particle size and reaction rate were investigated in a series of polymerisations employing an amended commercial recipe for polystyrene. The particle size was determined via a light transmission technique. Two computer models, based on the Smith and Ewart approach but taking into account the adsorption/desorption of soap at the monomer surface, were successful 1n predicting the particle size and the progress of the reaction up to the end of stage II, i.e. to the end of the period of constant reaction rate.

Insufficient discriminant validity:a comment on Bove, Pervan, Beatty and Shiu (2009)

Bove, Pervan, Beatty, and Shiu [Bove, LL, Pervan, SJ, Beatty, SE, Shiu, E. Service worker role in encouraging customer organizational citizenship behaviors. J Bus Res 2009;62(7):698–705.] develop and test a latent variable model of the role of service workers in encouraging customers' organizational citizenship behaviors. However, Bove et al. [Bove, LL, Pervan, SJ, Beatty, SE, Shiu, E. Service worker role in encouraging customer organizational citizenship behaviors. J Bus Res 2009;62(7):698–705.] claim support for hypothesized relationships between constructs that, due to insufficient discriminant validity regarding certain constructs, may be inaccurate. This research comment discusses what discriminant validity represents, procedures for establishing discriminant validity, and presents an example of inaccurate discriminant validity assessment based upon the work of Bove et al. [Bove, LL, Pervan, SJ, Beatty, SE, Shiu, E. Service worker role in encouraging customer organizational citizenship behaviors. J Bus Res 2009;62(7):698–705.]. Solutions to discriminant validity problems and a five-step procedure for assessing discriminant validity then conclude the paper. This comment hopes to motivate a review of discriminant validity issues and offers assistance to future researchers conducting latent variable analysis.

Source coded image data in the presence of channel errors

The growth and advances made in computer technology have led to the present interest in picture processing techniques. When considering image data compression the tendency is towards trans-form source coding of the image data. This method of source coding has reached a stage where very high reductions in the number of bits representing the data can be made while still preserving image fidelity. The point has thus been reached where channel errors need to be considered, as these will be inherent in any image comnunication system. The thesis first describes general source coding of images with the emphasis almost totally on transform coding. The transform technique adopted is the Discrete Cosine Transform (DCT) which becomes common to both transform coders. Hereafter the techniques of source coding differ substantially i.e. one tech­nique involves zonal coding, the other involves threshold coding. Having outlined the theory and methods of implementation of the two source coders, their performances are then assessed first in the absence, and then in the presence, of channel errors. These tests provide a foundation on which to base methods of protection against channel errors. Six different protection schemes are then proposed. Results obtained, from each particular, combined, source and channel error protection scheme, which are described in full are then presented. Comparisons are made between each scheme and indicate the best one to use given a particular channel error rate.

Degradation and stabilisation of diisocyanate cured polybutadiene

Hydroxyl terminated polybutadiene (HTPB) has been used as a rocket propellant binder which is required to be stored for at least twenty years. It is found that the excellent stress-strain characteristics of this propellant can be totally lost, during this long storage, due to the deterioration of the polybutadiene chains. As a result, the propellant can not stand the service loads, which may lead to a catastrophe. The study of the HTPB binder degradation, below 80°C, has been carried out by investigating the environmental factors and the changes which occur along the macromolecular chains. Results have shown that oxygen is the main factor which causes the crosslinking and chain scission reactions. The former is the predominant reaction and proceeds rapidly under oxygen sufficient environment. The unsaturation of polymer chain, which provides the desired physical properties to the binder, was lost with the increase in crosslink density. At the same time hydroperoxides were found to form and decompose along the polymer chains. Therefore, the deterioration of the binder results from the oxidation of polymer chains. Since the oxidation reaction occurred at higher rate than oxygen diffusion rate and oxygen diffusion rate is inversely proportional to the crosslink density, the binder, below the surface layer in a thick section container, could be naturally protected under an oxygen deficient condition for a long time. Investigation of the effectiveness of antioxidants in HTPB binder has shown that the efficiency of an antioxidant depends on its ability to scavenge radicals. Generally, aromatic amines are the most effective binder antioxidants. But when a peroxide decomposer is combined with an aromatic amine at the appropriate ratio, a synergistic effect is obtained, which gives the lowest binder gel increase rate.

Development and validaton of an indicator to compare antibiotic usage in secondary care in England

The use of antibiotics was investigated in twelve acute hospitals in England. Data was collected electronically and by questionnaire for the financial years 2001/2, 2002/3 and 2003/4. Hospitals were selected on the basis of their Medicines Management Self-Assessment Scores (MMAS) and included a cohort of three hospitals with integrated electronic prescribing systems. The total sample size was 6.65% of English NHS activity for 2001/2 based on Finished Consultant Episode (FCE) numbers. Data collected included all antibiotics dispensed (ATC category J01), hospital activity FCE's and beddays, Medicines Management Self-assessment scores, Antibiotic Medicines Management scores (AMS), Primary Care Trust (PCT) of origin of referral populations, PCT antibiotic prescribing rates, Index of Multiple Deprivation for each PCT. The DDD/FCE (Defined Daily Dose/FCE) was found to correlate with the DDD 100beddays (r = 0.74 prate a correlation between the IMD 2000 and primary care antibiotic prescribing rates but not between primary and secondary care antibiotic prescribing rates for the same referral population or between the weighted mean IMD 2000 for each hospital's referral population and the hospital antibiotic prescribing rate.

Ion plating

Under ideal conditions ion plating produces finely grained dense coatings with excellent adhesion. The ion bombardment induced damage initiates a large number of small nuclei. Simultaneous coating and sputtering stimulates high rates of diffusion and forms an interfacial region of graded composition responsible for good adhesion. To obtain such coatings on components far industrial applications, the design and construction Of an ion plater with a 24" (O.6rn) diameter chamber were investigated and modifications of the electron beam gun were proposed. A 12" (O.3m) diameter ion plater was designed and constructed. The equipment was used to develop surfaces for solar energy applications. The conditions to give extended surfaces by sputter etching were studied. Austenitic stainless steel was sputter etched at 20 and 30 mTorr working pressure and at 3, 4 and 5 kV. Uniform etching was achieved by redesigning the specimen holder to give a uniform electrostatic field over the surfaces of the specimens. Surface protrusions were observed after sputter etching. They were caused by the sputter process and were independent of grain boundaries, surface contaminants and inclusions. The sputtering rate of stainless steel was highly dependent on the background pressure which should be kept below 10-5 Torr. Sputter etching improved the performance of stainless steel used as a solar selective surface. A twofold improvement was achieved on sputter etching bright annealed stainless steel. However, there was only slight improvement after sputter etching stainless steel which had been mechanically polished to a mirror finish. Cooling curves Were used to measure the thermal emittance of specimens.The deposition rate of copper was measured at different levels of power input and was found to be a maximum at 9.5 kW. The diameter of the copper feed rod was found to be critical for the maintenance of a uniform evaporation rate.

Time scale analysis for fluidized bed melt granulation I: granule-granule and granule-droplet collision rates

Fluidized bed spray granulators (FBMG) are widely used in the process industry for particle size growth; a desirable feature in many products, such as granulated food and medical tablets. In this paper, the first in a series of four discussing the rate of various microscopic events occurring in FBMG, theoretical analysis coupled with CFD simulations have been used to predict granule–granule and droplet–granule collision time scales. The granule–granule collision time scale was derived from principles of kinetic theory of granular flow (KTGF). For the droplet–granule collisions, two limiting models were derived; one is for the case of fast droplet velocity, where the granule velocity is considerable lower than that of the droplet (ballistic model) and another for the case where the droplet is traveling with a velocity similar to the velocity of the granules. The hydrodynamic parameters used in the solution of the above models were obtained from the CFD predictions for a typical spray fluidized bed system. The granule–granule collision rate within an identified spray zone was found to fall approximately within the range of 10-2–10-3 s, while the droplet–granule collision was found to be much faster, however, slowing rapidly (exponentially) when moving away from the spray nozzle tip. Such information, together with the time scale analysis of droplet solidification and spreading, discussed in part II and III of this study, are useful for probability analysis of the various event occurring during a granulation process, which then lead to be better qualitative and, in part IV, quantitative prediction of the aggregation rate.

Impact of longitudinal power budget in coherent transmission systems employing digital back-propagation

We report the impact of longitudinal signal power profile on the transmission performance of coherently-detected 112 Gb/s m-ary polarization multiplexed quadrature amplitude modulation system after compensation of deterministic nonlinear fibre impairments. Performance improvements up to 0.6 dB (Q(eff)) are reported for a non-uniform transmission link power profile. Further investigation reveals that the evolution of the transmission performance with power profile management is fully consistent with the parametric amplification of the amplified spontaneous emission by the signal through four-wave mixing. In particular, for a non-dispersion managed system, a single-step increment of 4 dB in the amplifier gain, with respect to a uniform gain profile, at similar to 2/3(rd) of the total reach considerably improves the transmission performance for all the formats studied. In contrary a negative-step profile, emulating a failure (gain decrease or loss increase), significantly degrades the bit-error rate.