Adding value to renewables: a one pot process combining microbial cells and hydrogen transfer catalysis to utilise waste glycerol from biodiesel production

Waste glycerol was converted to secondary amines in a one pot reaction, using Clostridium butyricum and catalytic hydrogen transfer-mediated amination.

Adding value to performance measurement by using system dynamics and multicriteria analysis

Tese de dout., Filosofia, Department of Management Science, University of Strathclyde, 2004

Adding value to ecological risk assessment with population modeling

Current measures used to estimate the risks of toxic chemicals are not relevant to the goals of the environmental protection process, and thus ecological risk assessment (ERA) is not used as extensively as it should be as a basis for cost-effective management of environmental resources. Appropriate population models can provide a powerful basis for expressing ecological risks that better inform the environmental management process and thus that are more likely to be used by managers. Here we provide at least five reasons why population modeling should play an important role in bridging the gap between what we measure and what we want to protect. We then describe six actions needed for its implementation into management-relevant ERA.

Adding value to the urban lawnscape: insect abundance and diversity in grass-free lawns

Insect diversity may be declining even more rapidly than in plants and vertebrates, particularly in areas where indigenous habitats are replaced by an anthropogenic one. The most common component of anthropogenic greenspace is the ornamental lawn. Intensively managed and offering limited habitat opportunities for both plants and insects, lawns are biodiversity poor and ecologically insensitive. An alternative lawn format that positively influences biodiversity and reduces management requirements would be a useful tool in eco-friendly urban greenspace management. In investigating the potential for a forb-only alternative to the grass lawn we sampled both trial grass-free lawn formats and turf lawns to identify any influence that lawn composition and grass-free lawn specific mowing regimes might have on the abundance and diversity of insect families. In addition to the mowing regimes, both the composition and origin of lawn flora were found to significantly influence insect abundance and diversity and these factors rarely interacted. Native-only and mixed origin grass-free lawns hosted greater numbers of adult insects than found in turf and an equivalent diversity of insect families, however the mowing regime applied was distinct from traditional turf lawn management by being substantially less intensive and our results suggest that there is the potential for even greater abundance and diversity via the grass-free format that may offer additional resources to insectivorous garden species such as birds. When the composition of grass-free lawns included native forbs the diversity of insect families was found be sufficiently different from turf lawns to form distinct assemblages and in so doing contribute to beta diversity within urban greenspace. In sum, grass-free lawns may be a useful and aesthetically appropriate tool for adding value to the generally biodiversity poor urban lawnscape.

Adding Value to the Meat of Spent Laying Hens Manufacturing Sausages with a Healthy Appeal

The aim of this study was to evaluate the viability of the use of spent laying hens` meat in the manufacturing of mortadella-type sausages with healthy appeal by using vegetable oil instead of animal fat. 120 Hy-line (R) layer hens were distributed in a completely randomized design into two treatments of six replicates with ten birds each. The treatments were birds from light Hy-line (R) W36 and semi-heavy Hy-line (R) Brown lines. Cold carcass, wing, breast and leg fillets yields were determined. Dry matter, protein, and lipid contents were determined in breast and leg fillets. The breast and legg fillets of three replicates per treatment were used to manufacture mortadella. After processing, sausages were evaluated for proximal composition, objective color, microbiological parameters, fatty acid profile and sensory acceptance. The meat of light and semi-heavy spent hens presented good yield and composition, allowing it to be used as raw material for the manufacture of processed products. Mortadellas were safe from microbiological point of view, and those made with semi-heavy hens fillets were redder and better accepted by consumers. Values for all sensory attributes were evaluated over score 5 (neither liked nor disliked). Both products presented high polyunsaturated fatty acid contents and good polyunsaturated to saturated fatty acid ratio. The excellent potential for the use of meat from spent layer hens of both varieties in the manufacturing of healthier mortadella-type sausage was demonstrated.

Adding value to online privacy for consumers: remedying deficiences in online privacy policies with an holistic approach

We present findings from a longitudinal, empirical study of online privacy policies. Our research found that although online privacy policies have improved in quality and effectiveness since 2000, they still fall well short of the level of privacy assurance desired by consumers. This study has identified broad areas of deficiency in existing online privacy policies, and offers a solution in the form of an holistic framework for the development, factors and content of online privacy policies for organizations. Our study adds to existing theory in this area and, more immediately, will assist businesses concerned about the effect of privacy issues on consumer Web usage.

New approaches for adding value to paper and other substrates

This paper describes research into three different but interrelated technologies that can add value to commodity printing substrates by taking advantage of developments in synthetic chemistry, materials science and plasma physics. These investigations have been conducted in a Cooperative Research Centre (CRC) in Australia, called CRC Smartprint. Research into ink receptive coatings based on pigments possessing a positive surface charge has led to coatings that display improved resolution and colour saturation compared with silica based formulations. Although silica exhibits a high level of liquid absorption, it has relatively poor affinity for dye molecules contained in ink-jet ink. The second development involves the use of plasma enhanced chemical vapour deposition at atmospheric pressure to change surface functionality with particular emphasis on absorptive and printing properties. Thirdly, the development of a prototype labelling system based on the application of electrochromic conductive polymer to a flexible substrate that responds to electrical stimuli is discussed. Taken together, these three developments illustrate how both impact and non-impact printing technologies can be judiciously used to apply not only improved visual imagery to paper and paperboard, but also have the potential to enable printing of micro-electronic circuitry directly onto packaging materials, or onto labels that will enable a wide range of improved tracking, security and marketing functions to be incorporated cost-effectively into packaged goods in future.

Adding value to the Brazilian sisal: acid hydrolysis of its pulp seeking production of sugars and materials

The present work is inserted into the broad context of the upgrading of lignocellulosic fibers. Sisal was chosen in the present study because more than 50% of the world's sisal is cultivated in Brazil, it has a short life cycle and its fiber has a high cellulose content. Specifically, in the present study, the subject addressed was the hydrolysis of the sisal pulp, using sulfuric acid as the catalyst. To assess the influence of parameters such as the concentration of the sulfuric acid and the temperature during this process, the pulp was hydrolyzed with various concentrations of sulfuric acid (30-50%) at 70 A degrees C and with 30% acid (v/v) at various temperatures (60-100 A degrees C). During hydrolysis, aliquots were withdrawn from the reaction media, and the solid (non-hydrolyzed pulp) was separated from the liquid (liquor) by filtering each aliquot. The sugar composition of the liquor was analyzed by HPLC, and the non-hydrolyzed pulps were characterized by viscometry (average molar mass), and X-ray diffraction (crystallinity). The results support the following conclusions: acid hydrolysis using 30% H2SO4 at 100 A degrees C can produce sisal microcrystalline cellulose and the conditions that led to the largest glucose yield and lowest decomposition rate were 50% H2SO4 at 70 A degrees C. In summary, the study of sisal pulp hydrolysis using concentrated acid showed that certain conditions are suitable for high recovery of xylose and good yield of glucose. Moreover, the unreacted cellulose can be targeted for different applications in bio-based materials. A kinetic study based on the glucose yield was performed for all reaction conditions using the kinetic model proposed by Saeman. The results showed that the model adjusted to all 30-35% H2SO4 reactions but not to greater concentrations of sulfuric acid. The present study is part of an ongoing research program, and the results reported here will be used as a comparison against the results obtained when using treated sisal pulp as the starting material.

The Value of Adding Optics to Ecosystem Models: A Case Study

Many ecosystem models have been developed to study the ocean's biogeochemical properties, but most of these models use simple formulations to describe light penetration and spectral quality. Here, an optical model is coupled with a previously published ecosystem model that explicitly represents two phytoplankton (picoplankton and diatoms) and two zooplankton functional groups, as well as multiple nutrients and detritus. Surface ocean color fields and subsurface light fields are calculated by coupling the ecosystem model with an optical model that relates biogeochemical standing stocks with inherent optical properties (absorption, scattering); this provides input to a commercially available radiative transfer model (Ecolight). We apply this bio-optical model to the equatorial Pacific upwelling region, and find the model to be capable of reproducing many measured optical properties and key biogeochemical processes in this region. Our model results suggest that non-algal particles largely contribute to the total scattering or attenuation (> 50% at 660 nm) but have a much smaller contribution to particulate absorption (< 20% at 440 nm), while picoplankton dominate the total phytoplankton absorption (> 95% at 440 nm). These results are consistent with the field observations. In order to achieve such good agreement between data and model results, however, key model parameters, for which no field data are available, have to be constrained. Sensitivity analysis of the model results to optical parameters reveals a significant role played by colored dissolved organic matter through its influence on the quantity and quality of the ambient light. Coupling explicit optics to an ecosystem model provides advantages in generating: (1) a more accurate subsurface light-field, which is important for light sensitive biogeochemical processes such as photosynthesis and photo-oxidation, (2) additional constraints on model parameters that help to reduce uncertainties in ecosystem model simulations, and (3) model output which is comparable to basic remotely-sensed properties. In addition, the coupling of biogeochemical models and optics paves the road for future assimilation of ocean color and in-situ measured optical properties into the models.

Adding value through excellence

Enhancing stakeholder value in the pharmaceutical industry : the supply chain dimension

Adding Value to Manufacturing: Thirty Years of European Framework Program Activity

Part 1: Introduction