Use of Web Logs (Blogs) in Learning Environments: Blogs for Student Support

Innovation in technology and communications and particularly the advent of the Web is changing the structure of teaching and learning today. While there is much debate about the use of technology in learning and how e-learning is creating new approaches to delivery of learning there is been very little if any work on the use of of the emerging technologies in providing student support through their learning process. This paper reports on research and development undertaken by the eCentre based at the University of Greenwich School Of Computing in designing and developing a "Project Blog System" in order to address some long standing issues related to supervision of final year degree student projects. The paper will report on the methodology used to design the system and will discuss some of the results from students and staff evaluation of the system developed.

Exploring the Views of Police Officers on the Use of Video Taped Evidence in Child Abuse Cases in Northern Ireland

This paper sets out to explore the views and attitudes of police officers in the Greater Belfast area, concerning the process and use of video taped interviews with child witnesses, subsequently used as court evidence in child abuse cases. The information was collected by means of a postal questionnaire, completed by police officers who had all experienced joint interviews with social workers of child witnesses. With the increased use of video evidence as an alternative to the distressing experience of a child appearing in court to give evidence, the research findings and conclusions provide clear messages about future developments both nationally and internationally.

The use of cues for attention in ancient Greek art: aspects that influence concentration in the work of art and its elements

The goal of this study is to identify cues for the cognitive process of attention in ancient Greek art, aiming to find confirmation of its possible use by ancient Greek audiences and artists. Evidence of cues that trigger attention’s psychological dispositions was searched through content analysis of image reproductions of ancient Greek sculpture and fine vase painting from the archaic to the Hellenistic period - ca. 7th -1st cent. BC. Through this analysis, it was possible to observe the presence of cues that trigger orientation to the work of art (i.e. amplification, contrast, emotional salience, simplification, symmetry), of a cue that triggers a disseminate attention to the parts of the work (i.e. distribution of elements) and of cues that activate selective attention to specific elements in the work of art (i.e. contrast of elements, salient color, central positioning of elements, composition regarding the flow of elements and significant objects). Results support the universality of those dispositions, probably connected with basic competencies that are hard-wired in the nervous system and in the cognitive processes.

The use of process simulation methods in support of organisational learning in availability contracting

Traditional business models in the aerospace industry are based on a conventional supplier to customer relationship based on the design, manufacture and subsequent delivery of the physical product. Service provision, from the manufacturer's perspective, is typically limited to the supply of procedural documentation and the provision of spare parts to the end user as the product passes through the latter stages of its intended lifecycle. Challenging economic and political conditions have resulted in end users re-structuring their core business activities, particularly in the defence sector. This has resulted in the need for original equipment manufacturers (OEMs) to integrate and manage support service activities in partnership with the customer to deliver platform availability. This improves the probability of commercial sustainability for the OEM through shared operational risks while reducing the cost of platform ownership for the customer. The need for OEMs to evolve their design, manufacture and supply strategies by focusing on customer requirements has revealed a need for reconstruction of traditional internal behaviours and design methodologies. Application of organisational learning is now a well recognised principle for innovative companies to achieve long term growth and sustained technical development, and hence, greater market command. It focuses on the process by which the organisation's knowledge and value base changes, leading to improved problem solving ability and capacity for action. From the perspective of availability contracting, knowledge and the processes by which it is generated, used and retained, become primary assets within the learning organisation. This paper will introduce the application of digital methods to asset management by demonstrating how the process of learning can benefit from a digital approach, how product and process design can be integrated within a virtual framework and finally how the approach can be applied in a service context.

Use of luminescent gold compounds in the design of thin-film oxygen sensors

The use of two gold compounds incorporated into thin plastic films as luminescence quenching oxygen sensors is described. The films are sensitive both to gaseous oxygen and to oxygen dissolved in nonaqueous media such as ethanol. The luminescence quenching of these sensors by oxygen obeys the Stern-Volmer equation and Stern-Volmer constants of 5.35 x 10(-3) and 0.9 x 10(-3) Torr(-1) are found, respectively, for the two dyes in a polystyrene polymer matrix. The sensitivity of the films is strongly influenced by the nature of the polymer matrix, and greatest sensitivity was found in systems based an the polymers polystyrene or cellulose acetate butyrate. Sensitivity was not found to be temperature dependent though raising the temperature hom 15 to 50 degrees C did result in a slight decrease in emission intensity and a hypsochromic shift in the emission wavelength. The rate of response and recovery of the sensors can be increased either by decreasing film thickness or by increasing the operating temperature. The operational and storage stability of these films is generally good though exposure to light should be avoided as one of the dyes tends to undergo photobleaching probably due to a photoinduced ligand substitution reaction.

Use of recycled demolition aggregate in precast products, phase II: Concrete paving blocks

A study undertaken at the University of Liverpool has investigated the potential for using construction and demolition waste (C&DW) as aggregate in the manufacture of a range of precast concrete products, i.e. building and paving blocks and pavement flags. Phase II, which is reported here, investigated concrete paving blocks. Recycled demolition aggregate can be used to replace newly quarried limestone aggregate, usually used in coarse (6 mm) and fine (4 mm-to-dust) gradings. The first objective, as was the case with concrete building blocks, was to replicate the process used by industry in fabricating concrete paving blocks in the laboratory. The compaction technique used involved vibration and pressure at the same time, i.e. a vibro-compaction technique. An electric hammer used previously for building blocks was not sufficient for adequate compaction of paving blocks. Adequate compaction could only be achieved by using the electric hammer while the specimens were on a vibrating table. The experimental work involved two main series of tests, i.e. paving blocks made with concrete- and masonry-derived aggregate. Variables that were investigated were level of replacement of (a) coarse aggregate only, (b) fine aggregate only, and (c) both coarse and fine aggregate. Investigation of mechanical properties, i.e. compressive and tensile splitting strength, of paving blocks made with recycled demolition aggregate determined levels of replacement which produced similar mechanical properties to paving blocks made with newly quarried aggregates. This had to be achieved without an increase in the cement content. The results from this research programme indicate that recycled demolition aggregate can be used for this new higher value market and therefore may encourage demolition contractors to develop crushing and screening facilities for this. (C) 2011 Published by Elsevier Ltd.

The use of recycled demolition aggregate in precast concrete products – Phase III: Concrete pavement flags

A study undertaken at the University of Liverpool has investigated the potential for using construction and demolition waste (C&DW) derived aggregate in the manufacture of a range of precast concrete products, i.e. building and paving blocks and pavement flags. Phase III, which is reported here, investigated
concrete pavement flags. This was subsequent to studies on building and paving blocks. Recycled demolition aggregate can be used to replace newly quarried limestone aggregate, usually used in coarse (6 mm) and fine (4 mm-to-dust) gradings. The first objective was, as was the case with concrete building
and paving blocks, to replicate the process used by industry in fabricating concrete pavement flags in the laboratory. The ‘‘wet’’ casting technique used by industry for making concrete flags requires a very workable mix so that the concrete flows into the mould before it is compressed. Compression squeezes out water from the top as well as the bottom of the mould. This industrial casting procedure was successfully replicated in the laboratory by using an appropriately modified cube crushing machine and a special mould typical of what is used by industry. The mould could be filled outside of the cube crushing machine and then rolled onto a steel frame and into the machine for it to be compressed. The texture and mechanical properties of the laboratory concrete flags were found to be similar to the factory ones. The experimental work involved two main series of tests, i.e. concrete flags made with concrete- and
masonry-derived aggregate. Investigation of flexural strength was required for concrete paving flags. This is different from building blocks and paving blocks which required compressive and tensile splitting strength respectively. Upper levels of replacement with recycled demolition aggregate were determined
that produced similar flexural strength to paving flags made with newly quarried aggregates, without requiring an increase in the cement content. With up to 60% of the coarse or 40% of the fine fractions replaced with concrete-derived aggregates, the target mean flexural strength of 5.0 N/mm2 was still
achieved at the age of 28 days. There was similar detrimental effect by incorporating the fine masonry-derived aggregate. A replacement level of 70% for coarse was found to be satisfactory and also conservative. However, the fine fraction replacement could only be up to 30% and even reduced to 15% when used for mixes where 60% of the coarse fraction was also masonry-derived aggregate.

Use of the impedance cardiogram in public access defibrillators as an indicator of cardiopulmonary resuscitation effectiveness

An algorithm has been developed for a Public Access Defibrillator which utilizes distinctive features from the impedance cardiogram (ICG) recorded via defibrillator pads to advise both lay users and minimally trained bystanders to ensure CPR effectiveness. Following ethical approval, data were collected and marked. CPR was administered by trained personnel. 211 cases were gathered and the training set included 106 cases. A retrospective analysis was carried out of simultaneously recorded ECG and ICG. The speed of compressions was calculated by counting the outstanding waves in the ICG during CPR. Also if the base-to-peak amplitude of the ICG is greater than a minimum threshold, the corresponding compressions were classified as being applied with adequate force. For the validation set, adequate speed was detected with 91.45% sensitivity and 96.27% specificity (79826s) and adequate force with 99.94% sensitivity and 97.91% specificity (91973s). © 2011 CCAL.

Use of data dependence graphs in the design of bit-level systolic arrays

The use of bit-level systolic array circuits as building blocks in the construction of larger word-level systolic systems is investigated. It is shown that the overall structure and detailed timing of such systems may be derived quite simply using the dependence graph and cut-set procedure developed by S. Y. Kung (1988). This provides an attractive and intuitive approach to the bit-level design of many VLSI signal processing components. The technique can be applied to ripple-through and partly pipelined circuits as well as fully systolic designs. It therefore provides a means of examining the relative tradeoff between levels of pipelining, chip area, power consumption, and throughput rate within a given VLSI design.

Session 4: CVD, diabetes and cancer - Evidence for the use of the Mediterranean diet in patients with CHD

Diet is associated with the development of CHD. The incidence of CHD is lower in southern European countries than in northern European countries and it has been proposed that this difference may be a result of diet. The traditional Mediterranean diet emphasises a high intake of fruits, vegetables, bread, other forms of cereals, potatoes, beans, nuts and seeds. It includes olive oil as a major fat source and dairy products, fish and poultry are consumed in low to moderate amounts. Many observational studies have shown that the Mediterranean diet is associated with reduced risk of CHD, and this result has been confirmed by meta-analysis, while a single randomised controlled trial, the Lyon Diet Heart study, has shown a reduction in CHD risk in subjects following the Mediterranean diet in the secondary prevention setting. However, it is uncertain whether the benefits of the Mediterranean diet are transferable to other non-Mediterranean populations and whether the effects of the Mediterranean diet will still be feasible in light of the changes in pharmacological therapy seen in patients with CHD since the Lyon Diet Heart study was conducted. Further randomised controlled trials are required and if the risk-reducing effect is confirmed then the best methods to effectively deliver this public health message worldwide need to be considered.

Labour Law as Human Rights Law: A Critique of the Use of ‘Dignity’ by Freedland and Kountouris

In their recent book, The Legal Construction of Personal Work Relations, Mark Freedland and Nicola Kountouris present an ambitious study of the personal scope of (what they would not want to call) ‘employment’ law. The book does this within a broader argument that calls for the reconceptualization of labour law as a whole, and it is this broader argument on which I shall focus in this chapter. Their aim, in urging us to see labour law through the lens of ‘dignity’ is to bring labour law and human rights law into closer alignment than has sometimes been the case in the past. Increasingly, dignity is seen as providing a, sometimes the, foundation of human rights law, particularly in Europe. I shall suggest that whilst the aim of constructing a new set of foundations for labour law is a worthy and increasingly urgent task, the concepts on which Freedland and Kountouris seek to build their project pose significant difficulties. In particular, their espousal of ‘dignity’ presents problems that must be addressed if their reconceptualization is not to prove a blind alley.

The use of future-oriented knowledge in regional innovation processes: Research on knowledge generation, transfer and conversion

The importance of the regional level in research has risen in the last few decades and a vast literature in the fields of, for instance, evolutionary and institutional economics, network theories, innovations and learning systems, as well as sociology, has focused on regional level questions. Recently the policy makers and regional actors have also began to pay increasing attention to the knowledge economy and its needs, in general, and the connectivity and support structures of regional clusters in particular. Nowadays knowledge is generally considered as the most important source of competitive advantage, but even the most specialised forms of knowledge are becoming a short-lived resource for example due to the accelerating pace of technological change. This emphasizes the need of foresight activities in national, regional and organizational levels and the integration of foresight and innovation activities. In regional setting this development sets great challenges especially in those regions having no university and thus usually very limited resources for research activities. Also the research problem of this dissertation is related to the need to better incorporate the information produced by foresight process to facilitate and to be used in regional practice-based innovation processes. This dissertation is a constructive case study the case being Lahti region and a network facilitating innovation policy adopted in that region. Dissertation consists of a summary and five articles and during the research process a construct or a conceptual model for solving this real life problem has been developed. It is also being implemented as part of the network facilitating innovation policy in the Lahti region.

On Limits to the Use of Linear Markov Strategies in Common Property Natural Resource Games

We derive conditions that must be satisfied by the primitives of the problem in order for an equilibrium in linear Markov strategies to exist in some common property natural resource differential games. These conditions impose restrictions on the admissible form of the natural growth function, given a benefit function, or on the admissible form of the benefit function, given a natural growth function.

Regulatory History Material as an Extrinsic Aid to Interpretation: An Empirical Study on the Use of RIAS by the Federal Court of Canada

Since 1986, the Canadian Public Administration is required to analyze the socio-economic impact of new regulatory requirements or regulatory changes. To report on its analysis, a Regulatory Impact Analysis Statement (RIAS) is produced and published in the Canada Gazette with the proposed regulation to which it pertains for notice to, and comments by, interested parties. After the allocated time for comments has elapsed, the regulation is adopted with a final version of the RIAS. Both documents are again published in the Canada Gazette. As a result, the RIAS acquires the status of an official public document of the Government of Canada and its content can be argued in courts as an extrinsic aid to the interpretation of a regulation. In this paper, an analysis of empirical findings on the uses of this interpretative tool by the Federal Court of Canada is made. A sample of decisions classified as unorthodox show that judges are making determinations on the basis of two distinct sets of arguments built from the information found in a RIAS and which the author calls “technocratic” and “democratic”. The author argues that these uses raise the general question of “What makes law possible in our contemporary legal systems”? for they underline enduring legal problems pertaining to the knowledge and the acceptance of the law by the governed. She concludes that this new interpretive trend of making technocratic and democratic uses of a RIAS in case law should be monitored closely as it may signal a greater change than foreseen, and perhaps an unwanted one, regarding the relationship between the government and the judiciary.